HOME PRODUCTS PHOTOS INFORMATION SUPPORT CONTACT

WELCOME TO EMMLIGHTWe are a company specialised in energy efficient and sustainable lighting.

We focus on high quality and serious alternatives for a wide range of conventional light sources, such as TL lighting, incandescent light, and halogen lamps as well as HPS and MHL lamps both for new projects as well the replacement market.

Through years of experience in the field of lighting, cooperation with installers and suppliers, as well as exploration of the market, we are able to offer solutions both in the field of LED lighting as well as in the field of modern, high frequency T5 solutions, and induction lighting suitable for shops, offices, health care centres, gyms, schools, and warehouses.

We offer high quality, no nonsense products at competitive prices; products which have clear advantages for both the end user as well as installers in the field of sustainability, energy efficiency, quality, and ease of installation.

For us, excellent service comes naturally and, as we work with several production partners with strong research & development departments, Emmlight is a flexible organisation. We go beyond supplying lighting solutions only.

Are you also looking for sustainable and energy efficient lighting for your project? Please contact us via the contact form.

Extremely energy efficient and sustainable,industrial lighting will be availableas from the third quarter of 2010.

LED Track Luminaries are ideal for focusedpainting lighting. Also, because LED lightingdoes not radiate any UV.

Office spaces can be lit quicklyand efficiently with the Emmlight T5 luminaries.

Bring daylight into your office withthe dynamic LED panels of Emmlight.

Our LED downlights are availablein all types and sizes and can be fittedwith a light colour of your choice.

The (shop) lighting of Emmlight ensuressparkling colours and perfectly displayedproducts.

The products of Emmlight can be used in companieswho work CO2 neutral and who wish to minimise their carbon footprint.Besides this, our products meet RoHS standards.

Emmlight lighting contributes to a better environment.

All of our lighting products are manufacturedin high quality production facilities in Asiaand our products meet the strictest quality standards.

Emmlight only works with the most energy efficientand sustainable light sources available.LED lighting is one of them.

ADDRESSPostal addressNautilusstraat 37821 AG EmmenTHE NETHERLANDS

Visiting addressWesterstraat 1527811 MV EmmenTHE NETHERLANDS

T5 ADAPTERS

T5 TL tubesT5 TL tubes are the modern version of the common T8/TLD tube. The T5 has a number of advantageous features compared to the T8:

High efficiency, energy saving. The T5 tube lasts twice as long as a T8 tube (16,000/20,000 hours). High frequency TL, flicker free lighting. Environmentally friendly due to a longer life span and lower amounts of mercury. Available via Emmlight in the colours 830, 840, 865 or 930, 940 or 965 (high CRI). No start-up problems.

A T5 tube has a diameter of 16 mm and a G5 fitting. A T8 tube has a diameter of 26 mm and has a G13 fitting. Also the lengths of the tubes differ. This to ensure that they can not be fitted in the same fixtures. The productThe T5 Adapter is a product which can be applied 1 on 1 in order to replace T8/TLD tubes. The product consists of:

1. A high frequency T5 TL tube (high efficient or high output).2. An adapter which: Converts the G5 fitting to a G13 fitting. Contains a ballast. Converts the length of the T5 tube to that of a T8 tube. Certain versions come with a replacement for the old starter.

The T5 adapter ensures that energy efficient T5 tubes can be used directly in old T8 luminaries (which include an electromagnetic ballast and a starter) without making any adjustments. This leads to savings on energy consumption of up to 50% without having to make compromises in light output.

The adapters are available in several different types, but the base product of Emmlight is the 28 Watt 120 cm version which can be used to replace the regular T8 tubes of 36 Watt. They are available as a round version, as a version fitted with a reflector (in situations where extra high Lux values are required) or as a version without a reflector (in situations where the round version does not fit in the existing luminary). SavingsThe use of T5 Adapters leads to significant savings in energy consumption. These savings are achieved in two different ways:

1. The T5 tube gives the same amount of light at a lower wattage.2. The Adapter (and the new starter) ensures that the electromagnetic ballast is no longer used.

A very efficient electronic ballast is used instead. In practice this leads to, for example, the following savings:

T8 luminary 30X120 cm, twice T8/TLD 36 Watt TL tube - consumption 100 Watt* Replace by two 120 cm T5 Adapters of 28 Watt each - consumption 56 Watt Saving = 44%

In a situation with an annual amount of 2,600 hours (50 hour weekly) and a kWH rate of € 0,20 this would mean: (2,600 x 44) / 1,000 x 0,2 = € 22,88 annually.*Energy consumption when using class B2 ballasts or a lower class. Exact consumption differs from situation to situation.

T8 luminary 30X150 cm, twice T8/TLD 58 Watt TL tube - consumption 150 Watt* Replace by two 150 cm T5 Adapters of 35 Watt each - consumption 70 Watt Saving = 53%

In a situation with an annual amount of 2,600 hours (50 hour weekly) and a kWH price of € 0,20 this would mean: (2,600 x 80) / 1,000 x 0,2 = € 41,06 annually.*Energy consumption when using class B2 ballasts or a lower class. Exact consumption differs from situation to situation. Depending on your situation, this would mean that the investment in a T5 Adapter is recouped within 1 to 1.5 years on average.

T5 LuminariesIt is not always possible to use T5 adapters. For example in situations with 60x60 TL luminaries, in situations where the luminaries are already high frequency or in situations with a ballast without a starter or in cases where the existing luminaries are simply too old. For these situations Emmlight offers completely new T5 luminaries which can be found elsewhere on this website.

Advantages More light, less energy. Suitable for replacing regular T8 TL tubes. Savings of up to 50% can be achieved. Very easy installation.

Double the life span; 16,000 - 20,000 hours. Two years warranty. Return on investment within 18 months (2,600 hours annually, € 0,20 per KwH). High frequency TL, flicker free light. Environmentally friendly due to a longer life span and lower amounts of mercury. Available in a wide spectrum of light colours 930, 940 and 965 (high CRI) and regular light

colours 830, 840, or 865. Available in the usual TL lengths 120 and 150 cm. No start-up problems.

T5 LUMINARIES

30 to 50% saving on your TL lighting costsEmmlight offers you a whole new range of energy efficient, high frequency T5 luminaries for offices, shops, schools, and other public buildings. Our design luminaries have a screen friendly character and give increased visual comfort. Besides this, you will save 30 to 50% on your energy costs in comparison to traditional T8 luminaries.

High efficiencyThe T5 luminary series are characterised by an ideal light output with a reflection efficiency of at least 85%. This is achieved by using highly reflecting matted anodised aluminium (99,9% pure). The luminance is limited by cross louvres and side mirrors.

Advantages More light, less energy. 30 to 50% saving on lighting costs. EIA-subsidy applicable (approximately 14% net). Low replacement costs due to easy installation (fitted with a two metre cord and plug). Suitable for suspended ceilings with a module size of 600 mm. Fitted with a high frequency electronic ballast. Supplied including preassembled light sources (18,000 hours). Supplied with T5 light sources with a high CRI value (>90). Light colours 930, 940 or 965.

T5 SPECIALS

Unique design for sharp pricesThe T5 Specials collection of Emmlight consists of a series of design luminaries which make use of T5 light sources. All luminaries have a unique design and are made of high quality aluminium with an excellent finish. Besides, they are fitted with sand blasted glass diffusers which ensure an ideal and soft lighting distribution. All these elements ensure that the luminaries are very suitable for even the most demanding clients. However, as we produce ourselves, we are able to keep the price level attractively low.

Energy efficientAs we make use of T5 light sources in our luminaries, we combine our sustainable philosophy with timeless design. Besides the fact that the luminaries look good, they are also good for the environment and they last extra long. Advantages

More light, less energy. Suitable for general or focused (office) lighting.

Saving on lighting costs. Unique design. High quality materials and finish. Beautiful light distribution. Fitted with high frequency electronic ballast. Supplied including light sources (18,000 hours) with light colour of choice; 830, 840, or 850. Attractively priced.

LED DOWNLIGHTS

Complete LED luminariesThe LED luminaries of Emmlight offer a perfect, energy efficient alternative for the widely in use halogen- and PL-downlights. All luminaries are fully equipped, ie. including clips in order to mount in several different types of ceilings and they come with integrated power LEDs and drivers. Besides this, the high-end downlight series of Emmlight have a Wieland connector to make installation of the luminaries even easier. Light outputConsuming 3 Watt to 44 Watt of power. Due to the light output, Emmlight luminaries can serve as a replacement of 35 Watt halogen downlights, PL downlights with different power consumption, and downlights fitted with 70 Watt CDM-t lamps. The lumen output varies from 200 to up to 3,500 Lumen! This means that they can be used in even the most demanding light plan. Budget and High-EndBy offering a Budget line as well as a High-End line, everyone can now make use of this energy efficient and luxury form of LED lighting. The Budget line consists of luminaries from small to large suitable for projects where budget is an issue. The luminaries are relatively simple and made of aluminium and are fitted with integrated LED modules with several LEDs and LED drivers. They come without preassembled power cords, though with strain relief. The light is spread evenly by means of a sandblasted diffuser. The warranty on these luminaries is 2 years. The High-End line consists of luxury IP40 certified luminaries with Wieland connectors, single, powerful LEDs, excellent reflectors, and so-called ‘light baffles’ which prevent annoying glare. They are supplied in three different compact sizes of 90, 120, or 145 mm and in luminary colours black, white, and silver and come with 3 years warranty by the manufacturer. Light coloursLike all products of Emmlight, all of our downlight luminaries have a CRI value of at least 80. This makes them suitable for demanding environments like clothing shops. Light colours 830, 840, 850, or 865 are available. Advantages

More light, less energy. Suitable for replacing virtually all types of downlights with regular light sources. Easy installation. Very long life span due to use of LEDs. Luxury finish. Saving on lighting costs and replacement costs. No UV radiation. Available in light colours 830, 840, 850, and 865.

Available in luminary colours white, black, and silver. LED TRACK LUMINARIES

The ideal, energy efficient, accent lightingDeveloped with retail projects in mind, whether a clothing shop, a kitchen showroom, or a gallery, Emmlight has a series of LED track luminaries. These lamps are ideal for applications where accent lighting is required and flexibility is a must. Besides, they are very energy efficient due to the use of LEDs and they have a very long life span.

Suitable for standard 3 phase trackAll Emmlight track luminaries can be used in 3 phase track systems due to the fact that they are fitted with a standard 3 phase adapter. This means you do not have to make any adjustments if you already own such a system. For new projects, on this website you will find complete 3 phase track systems including all accessories.

The advantages of track luminaries in combination with track systems are evident. The luminaries can be clicked onto the track as desired, moved if needed, (for example when the shop interior gets changed), and precisely target the area to be lit. LuminariesWe offer four different track luminaries in order to meet a wide demand. Firstly, a small elegant type with a power consumption of 7.5 Watt which is suitable to replace 50 Watt halogen spots. Besides that, a 13 Watt luminary with a unique design and a single, powerful, LED for a tight beam. The third luminary consumes 16 Watt and can be used to replace halogen lamps of 75 to 100 Watt.

A forth luminary, exclusively developed for Emmlight, will be introduced to the market by the end of 2010. It will be a product which offers a solution for the demand in energy efficient and sustainable variants on very powerful retail lighting like CDM lamps. Light- and luminary coloursIf required, the track luminaries can be supplied with light colours 830, 840, or 850 and will meet the standard required in retail lighting; sparkling colourfastness and light colours suitable for any situation. These luminaries are available in the colours white, black, and silver. Advantages

More light, less energy. Suitable for standard 3 phase track systems. Very long life span due to use of LEDs. Focussing light to places where this is required. No UV radiation. Saving on lighting costs and replacement costs. Available in light colours 830, 840, or 850. Available in luminary colours white, black, and silver.

3 PHASE TRACKS & ACCESSORIES

The retail track solutionIn order to serve clients who wish to make use of our LED track luminaries but do not yet own a 3 phase track system, Emmlight offers a completely range of 3 phase tracks as well as corresponding

accessories. Especially for retail, this is a very interesting lighting solution due to its flexibility. When changing the interior, the lighting can be adjusted right away without any major interventions needed. 3 phase trackThe high quality, aluminium, Emmlight 3 phase tracks are available as surface and recessed version and in the colours white, black, and silver. The surface version can even be mounted directly onto the ceiling due to predrilled holes, but it can also be supplied as a slide track of up to 3 metres or be mounted with ceiling mounts. All tracks are supplied as 1, 2, or 3 metre items and can be shortened with a hacksaw, as desired. The track has 3 circuits which can be controlled separately and are each suitable to 20A with a voltage of 230 to 250 volt. So each circuit can handle 4,600VA to 5,000VA. AccessoriesAlso, all accessories of the 3 phase tracks are available in white, black, and silver and consist of connectors, fittings, L, T, X, and flexible shape ceiling mounts and slide track. Advantages

Flexible and complete track system. Available in white, black, and silver. High quality materials used.

FLEX 1

The bendable Emmlight Flex 1 track system is a 2 phase system which can take loads up to 20A. This ensures that a 4,600VA charge per circuit is possible and therefore just one power supply of 9,200VA can be installed.

The Flex 1 system comes in a brushed aluminium finish and therefore has a luxury finish. Besides this, the system can be assembled and installed easily and obviously all necessary accessories are available. The Flex 1 system is suitable for installation in shops, galleries, and other commercial areas.

The Flex 1 GU10 spots can easily be fitted with 3 Watt dimmable Philips Master LED GU10 lamps and therefore they offer a sturdy and energy efficient form of accent lighting. The spots are fitted with a black anti-glare ring to prevent annoying glare.

Advantages The flexible track makes it possible to mount the system in any shape desired. Luxury finish. Renowned Philips GU10 spots can be fitted. Easy assembly and installation. Complete set of accessories available. Loads of up to 9,200VA possible with one power connection.

INDUSTRIAL LIGHTING

Electrodeless induction lightingThe base technology for induction lamps is not all that new. The principle of induction lighting was demonstrated around 1890 by scientist Nicola Tesla who created wireless power consumption in his laboratory in New York.

Induction lamps are comparable with TL-lighting due to the fact that they both use gas, which once ‘activated’, reacts with phosphor in glass housings and produces white light. Contrary to fluorescent lamps, induction lamps have a life span of approximately 100,000 hours! This is due to the fact that TL-lamps make use of electrodes, which fail relatively easily. Induction lamps work on the principle of induction (energy transfer by means of a magnetic field). Consider it as wireless lighting.

How do induction lamps work?Based on the above mentioned principles, light can be generated with simple magnetism. Electromagnetic transformers, which consist of cores with metal coils, by use of a low-frequency create an electromagnetic field around a glass tube which contains gas. The discharge, caused by the coils, causes the acceleration of free electrons which collide with mercury atoms and activate the electrons. If the activated electrons of this higher energy-situation fall back to a lower stable level, they produce ultraviolet radiation. The UV-radiation is converted into visible light by a phosphor coating on the surface of the glass tube. The round continuous shape of the glass of an induction lamp maximises the efficiency of the energy fields generated. Although being a breakthrough in science in the field of lighting, induction lighting has not been commercially viable until recently. However, recently several barriers have been overcome and costs have decreased. Technological setbacks, such as EMC-distortion, low lumen output as well as the lack of a possibility to dim have been overcome. Nowadays, the clear advantage of induction lighting as well as its attractive price ensures that it is the ideal choice to replace several traditional light sources. Advantages

Low power consumption. Energy savings of 50% and more, compared to conventional lighting, are possible.

Very long life span. With a life span of up to 100,000 hours, the costs of replacement, purchasing, logistics, warehousing, etc. can be reduced.

Maintenance costs. Expensive maintenance contracts for replacing traditional lighting and ballasts can be suspended. Especially at hard to reach places in factories and other high areas these costs can be considerable.

Sensitive parts. Due to the absence of sensitive parts such as incandescent light wires and electrodes, induction lamps are much less sensitive to failure.

Warmth. Induction lamps develop very little warmth. Colour rendering. A high colour rendering-index (CRI) is essential for visibility, safety, and

comfort. Induction lamps have a natural light colour with a CRI value of 82 or higher. Switching on and off. Induction lamps can be switched on and off instantly and have no

warming-up or cooling down period. Ignition at low temperatures. Induction lamps can be ignited without problems or loss in

light output at temperatures as low as minus 40 degrees Celsius. Flickering and blinding. Induction lamps do not flicker and have minimal glare. This improves

productivity and decreases the chance of headache or dazzle. Hum. Induction lamps do not hum and therefore they are very comfortable. Environmentally friendly. Due to their low energy consumption and long life span, induction

lamps can be used in schemes to reduce the carbon footprint. EMC. Induction lamps meet the EMC/EMI standard 2004/108/EC. Return on Investment. The average return on investment of an induction lamp compared to

traditional lighting is around 3 years. Warranty. Emmlight gives 5 years warranty on the induction lamps and the electronic ballast.

Features of Emmlight induction lighting

Long life span: Average life span 100,000 hours. High lumen efficiency: 70-90 lm/W Effective lumen efficiency: 130-150 lm/W High colour rendering index: Ra> 80 Warm start: Instant start and re-start High power factor: PF> 0.98 Flicker free, low glare: Comfortable light for the protection of sight Available in different colour temperatures: 2,700, 4,000, or 6,500 Kelvin Constant output: At a fluctuating input of ± 20%, the output of the induction lamps varies

less than 3% Anti switch-off resistance: The lamp will not switch off, even if the voltage drops to 40% Insensitive to low temperatures. Induction lamps will work without problems at

temperatures as low as -40 ℃ Little harmonic distortion: THD ≦ 8%, meets the international standard level NEN-EN IEC

61000-3-2. Electromagnetic compatibility: With a working frequency of 210K Hz, induction lamps meet

the EMC / EMI international standard

DYNAMIC LED OFFICE LIGHTING

Why dynamic light?Dynamic LED office lighting of Emmlight (market introduction end 2010) is an advanced solution to introduce the dynamics of daylight to the working space.

The dynamic lighting creates a stimulating and natural atmosphere and makes it possible to adjust the light to personal preference, time, and activity. Due to this, the well-being of people as well as their motivation and output improves. Introducing dynamics to the intensity, colour, and division of (artificial) light can be used for several different applications. You are most probably well aware of the effects of extra dynamics in theatre lighting, TV, or the going out scene. Worldwide, a lot of research has been conducted to the effects of light on the functioning of human beings. It appears that light dynamics has a major biological influence. These insights are the basis of new applications, such as:

Increased well-being of human beings which have little to no daylight at their work space. Medical applications, for example synchronising the biological clock. Creating stimulating effects by altering light colours and intensity.

Until recently, such lighting installations were expensive and very rare. However, the Emmlight system makes dynamic light achievable and affordable. Luminaries for dynamic lightAs from end 2010, Emmlight will be offering two luminaries whereby you will be able to adjust the intensity as well as the light colour; one luminary will be of the standard size of a 60 x 60 cm TL luminary and one will be similar to the 30 x 120 cm TL luminary. Both will be equipped with LEDs of different light colours and can be chained up to 7 maximally. The light is spread via special diffuse

plastic panels in order to avoid glare. Besides, due to the standard dimensions they can be used in virtually any standard suspended ceiling. Lighting the work space the way you wishThe Emmlight LED panels come with an infrared sensor and a simple remote control, controlling to up to 7 panels. This makes them pre-eminently suitable for lighting individual work spaces and office spaces. The work space can now be lit the way the individual employee desires. The light can be adjusted to the mental condition, the mood, the time of day, and the type of work to be carried out. Flexible office conceptsBesides, lighting individual, fixed work spaces the LED panels are also very suitable for new flexible work and architectural concepts. With these type of concepts, the same spaces can be used by different people, for different purposes, and at different times. A room which was used for a presentation in the morning could be used as a working room in the afternoon and for a reception in the evening. Obviously, a different type of lighting is required for each occasion. A requirement which can be met with the Emmlight LED panels. Advantages

Focuses on the individual. Helps biological clock. Less fatigue. Manual adjustment possible. No blinding. Energy efficient. Very long life span due to use of LED lighting. Easy installation in virtually any suspended ceiling. Easy operation.

Download Brochure

Brochure

RESEARCH & DEVELOPMENTEmmlight works with fixed Asian production partners in China, Taiwan, and Korea, all of which have very strong Research & Development departments; this is a requirement of Emmlight in order to begin cooperation. On the one hand, this means that market developments can be detected quickly and adequately responded to, and translated in to concrete lighting products, and on the other hand that our partners are able to offer new and innovative products to Emmlight. Our partners work with fixed teams of experienced engineers and designers and they own state of the art production equipment. Together we form strategic alliances in order to lead and conquer the market with our lighting products and to be able to continuously offer the highest quality possible within this constantly changing market. We evaluate the relations with our partners and we cooperate in order to understand (future) market needs, to plan, and to convert all this into a professional product range.

Quality is paramount. We ensure quality by focussing on several important aspects. Certification marks

On two levels we ensure that the required quality certification marks are present. Our partners meet the ISO9001 standards. Our products are to have at least a CE certification mark as well as several EMC standards such as EN55015, EN55022, EN61000-3-2/03, EN61547, EN61347 and EN61347-2-3. Whenever required, extra certification marks such as RoHS and TÜV are applied. Quality ControlOur production partners in Asia are controlled strictly by our own Asian engineers. The management of this experienced team is done from our own Emmlight office in Taipei, Taiwan. In the area of the production facility the following is checked:

Client satisfaction - Employees are to clearly understand who their internal and external clients are with client satisfaction as their primary goal.

Safety, environment, hygiene, and tidiness - Parts are to be easily accessible, inventory is to be counted/ estimated easily, and products are to be transported safely & efficiently.

Visual Management System - Tools which give visual signals and indications are to be clearly visible.

Scheduling System - A “single pacing process” is used for each product line and the respective sub-suppliers controlling the speed of all upstream activities.

Use of space, traffic of materials, and production line flow - All space is to be used efficiently, production materials are to be moved over a short distance only, materials and tools are to be within reach.

Amount of stock and products in progress - Production processes are to require as little stock as possible and the amount of observable components is to be low as a result of this.

Teamwork and motivation - Employees are to focus on productivity and quality, they are aware of their job description and are to share their knowledge with their colleagues and clients.

Condition and maintenance of equipment and appliances - Equipment is to be kept clean and well maintained.

Management of complexity and variability - This category evaluates how the management controls the complexity and variability within its industry.

Supply Chain integration - The costs are kept low and the quality is kept high by working with a relatively small amount of dedicated suppliers.

Striving for quality - Constantly striving for the highest quality and to increase productivity. Besides, there are many checks at product level, both during the production process as well as the moment the products are ready for shipment. Here it is important that the products meet the set product specifications, function properly, are not damaged and are packed the right way and in compliance with the instructions. InstallationVirtually all Emmlight products are constructed in such a way that installation can be conducted easily and intuitionally. For example, our downlights are suitable to be mounted directly in the cutting holes of existing downlights and they are fitted with strain relief. Products of the High-End series are fitted with Wieland connectors. Our T5 luminaries and dynamic LED panels are fitted with two metre power cords and plugs and can be mounted directly into virtually any suspended ceiling. Another example are our 3 phase LED track products; these can be mounted in existing track systems or supplied as a complete system. In short, Emmlight keeps the installers in mind. WarrantyPartly due to the above mentioned processes, Emmlight is able to offer a warranty for several years on its entire product range. Varying from 2 years on, for example, the Budget LED downlight line and

the T5 products to 3 years on the High-End LED products and even 5 years on the industrial lighting solutions.

SUPPLY & STOCKEmmlight is a business to business supplier and supplies its lighting on a project basis and/or to wholesale. Purposely, no large quantity of stock is kept in order to be able to respond to market demands. Besides, this saves costs which is reflected in our prices. SupplyIn case lighting products are ordered on a project basis, these will be supplied custom to the respective projects. Monthly, wholesale can place orders. Due to fast production processes we supply within 6 weeks on average.

StockEmmlight keeps so-called buffer stocks of its product range. This means that both at our Asian partners as well as in the Netherlands, limited quantities of stock is kept of both the end products as well as of product parts. This ensures that rush orders can be placed as well as back orders on previous orders.

Product rangeOur product range is displayed in our showroom in Emmen. You are welcome to visit us and to see our products working as well as to be more informed about our sustainable lighting solutions.

VISIONWe strive to offer high quality, energy efficient, alternatives for conventional lighting. Quality and honesty are paramount. By testing our products extensively and by checking them prior to market introduction, we stand 100 percent for what we promise; offering no nonsense, energy efficient, and high quality lighting products for the business to business market. By working with unique partners with strong R&D possibilities and by keeping in contact with our market, we are always able to offer the most suitable lighting solution for your project and decrease our overall carbon footprint.

WHAT SETS US APART FROM THE RESTEmmlight acknowledges that technological developments within the world of lighting advances rapidly and that it is essential to follow the latest developments in the market and preferably be ahead of them. Success in offering energy efficient types of lighting is not only achieved with good specifications, but also in the speed at which advanced products can be introduced to the market. The products of Emmlight are at all times up-to-date and deliver what they promise; the best energy efficient alternative for a competing price for your lighting project, making use of the latest technology available. The flexibility of our company in combination with strong Asian partners ensures this. Clients of Emmlight can rest assured that they will always be purchasing products which are new and innovative and that they will save costs in the area of energy consumption and maintenance.

SAVINGS CALCULATORBelow you will find the Emmlight savings calculator. Here you can calculate your annual savings which can be achieved with our products in a fast and easy manner.

The calculator is divided in different colours depicting which type product it refers to: Light blue= TL LightingMagenta = Halogen lightingPurple = Downlights with halogen lightingOrange = Downlights with PL lampsRoyal blue= Downlights with CDM light sourcesLight green = 3 phase track lamps with halogen lightingDark green = 3 phase track lamps with CDM light sourcesDark blue= Industrial lighting

The first row depicts the traditional product and underneath it the Emmlight product which you could use as a replacement. You can fill in how many lamps you have and how many hours these lamps are switched on daily on average. Your annual energy saving is calculated automatically in Euros and as a percentage. You can fill in as many products as you like at once. Furthermore, the power consumption in Watt of the traditional lighting and the Emmlight product is depicted, as well as the average life span of the products. * The power consumption is based on the consumption of the light source including ballast loss. The calculation is based on an average kWH price including energy tax, fixed costs, and network costs of € 0,20. In case your situation differs or you would prefer a more elaborated calculation, please feel free to contact us.

YOUR SAVING ON ANNUAL ENERGY COSTS: € 0.00 (0%)

AmountAverage amountHours dailyPower*Life span (hours)AnnualEnergy costs

YOUR SAVING ON ANNUAL ENERGY COSTS: € 0.00 (0%)

COMPARISON EMMLIGHT LIGHT SOURCES Ideal replacement forT5 Regular T8 TL lighting of 18, 36 or 58 Watt.LED Halogen lighting, incandescent light bulbs, spotlights such as track lights and focused

lighting such as downlights. Suitable for the replacement of light sources up to 100 to 120 Watt max.

Induction MHL, HPS and HPM lighting with high wattages (250 or 400 Watt). Suitable for hard to reach places and having a long life span.

WarrantyT5 2 yearsLED 2 to 3 yearsInduction 5 years Amount of hoursT5 14,000 / 20,000

LED 30,000 / 50,000Induction 80,000 / 100,000 Average energy savingT5 40 - 50%LED 70 - 80%Induction 50% Efficiency (Lumen per Watt)T5 >75LED 40 - 100Induction 70 - 90 Average return on investment (2,600 hours annually)T5 1 to 2 yearsLED 1 to 2 yearsInduction 3 years Light colours (Emmlight)T5 830, 840, 865 & 930, 940, 965LED 827, 830, 840, 850, 865Induction 927, 940, 965 Available Consumptions (Emmlight)T5 14, 28 and 35 WattLED 1 to 50 WattInduction 23 to 300 Watt CRI - colour fastness (Emmlight)T5 80 or 90LED 80Induction >80 Brightness lampT5 Slightly brighter than regular TL lighting due to smaller tube LED LEDs give a lot of light from a relatively small surface. Therefore this can sometimes be

experienced as bright.Induction Low brightness due to a relatively large light producing surface. PropertiesT5 A T5 lamp is a TL-lamp which is more energy efficient and lasts longer than a traditional TL-

lamp (T8). The lamp is both thinner as well as shorter than the T8, and therefore contains fewer pollutants. Besides this, the T5 lamp is a high frequency lamp and therefore produces a more pleasant and steady light.

LED A Light Emitting Diode (LED) is a semiconductor whereby electric energy is transformed directly into light. As the lighting works without any moving parts, the amount of hours is significantly longer than that of, for example, incandescent light- and halogen lamps, and TL lighting.

Induction The electrodeless induction lamp is a special embodiment of a fluorescent lamp. Due to the absence of electrodes, which decide the life span of maximally 20,000 hours at

ordinary fluorescent lamps (TL and PL), these lamps can have a life span of up to 100,000 hours. So they are ideal for locations where the cost of replacement - and maintenance is high.

TemperatureT5 T5 works ideally at normal to warm temperatures. Temperatures of around or below 0

degrees Celsius will lead to decreased efficiency (as is the case with T8 TL and PL lamps)LED LED is best not to get too warm. If the temperature of an LED gets higher than 65 to 70

degrees, the life span will be decreased significantly. This is also the reason of the heat sinks (mostly made out of aluminium) of most LED lamps. High temperatures of luminaries whereby LED light sources can dispose their warmth are therefore not ideal. On the other hand, LED works perfectly at low temperatures. Even at minus 30 degrees Celsius LED works fine.

Induction Induction lamps can work in extreme temperatures. Even at minus 40 degrees Celsius, the lamp will work without falter and without loss in light output.

Switching on and off momentsT5 The life span of a T5 is influenced negatively by the amount of switching on and off

moments.LED Theoretically, an LED can be switched on and off endlessly without the life span being

influenced.Induction The life span of an induction lamp is influenced negatively by the amount of switching on

and off moments. Instant Start-upT5 At first use, T5 lamps have to burn in for several hours. When used in a T5 adapter or in a

luminary with an electronic ballast, they will start up immediately.LED Yes. An LED does not have to warm up and will switch on immediately.Induction Induction lamps burn at full capacity right away. Also, the lamps do not need to cool off

before they can be switched on again. Power FactorT5 >0.95LED >0.7Induction >0.98 Hazardous substancesT5 Yes. T5 contains the hazardous substance mercury. Although in significantly smaller

amounts than a regular T8 TL-lamp. A T5 contains 3 mg mercury on average, a T8 15 mg. When a T5 breaks, harmful mercury vapour could escape.

LED No. LED meets the RoHS standards; Restriction of Hazardous Substances. However, as LED lamps contain electronics, they still need to be disposed of separately.

Induction Yes. An induction lamp contains the mercury alloy amalgam. However, as this is a solid substance, it can easily be recycled. Also, no hazardous substances can escape in case of breakage of an induction lamp. Due to the long life span, it is a very sustainable product.

INDUCTION vs. MHL, HPS AND LPS

Type of lamp Consumption Power consumption Life span CRI Lumen Pupil Lumen

High Pressure Sodium 70 88 24,000 21 5,670 3,323High Pressure Sodium 150 188 24,000 21 14,000 7,980High Pressure Sodium 250 300 24,000 21 25,600 14,592High Pressure Sodium 400 464 24,000 21 45,000 25,650High Pressure Sodium 1,000 1,100 24,000 21 126,000 71,820Induction 40 41 100,000 80 3,400 5,508Induction 80 82 100,000 80 6,800 11,016Induction 100 102 100,000 80 8,500 13,770Induction 120 122 100,000 80 10,200 16,524Induction 200 204 100,000 80 17,000 27,540Metal Halide 150 188 15,000 65 11,300 16,837Metal Halide 175 215 10,000 65 13,500 20,115Metal Halide 250 295 10,000 65 17,000 25,330Metal Halide 400 456 10,000 65 28,800 42,912Metal Halide 1,000 1,070 12,000 65 92,900 138,421Low Pressure Sodium 180 220 16,000 0 26,100 9,918Low Pressure Sodium 135 178 16,000 0 19,140 7,273Low Pressure Sodium 90 124 16,000 0 11,0915 4,216Low Pressure Sodium 55 80 18,000 0 6,655 2,529Low Pressure Sodium 35 60 18,000 0 4,000 1,520

Pupil Lumen

Pupil Lumen has been introduced due to the fact that many light sources were measured based on values which do not comply with the way the human eye experiences light. For example, sodium lamps with their orange / yellow light have a very high lumen output, but they should be adjusted downwards with a large factor (the so-called S/P ratio) in order to arrive at the lumen output which is experienced by human beings.

Induction lighting has an S/P ratio of 1.62. This means that the lumen output of induction lamps could be multiplied with this factor in order to arrive at the Pupil lumen. Other light sources have the following S/P ratio.

Source: Outdoor Lighting, Visual Efficacy; Volume 6, Issue 2, January 2009

In case you would like to know more about Pupil lumen, please visit the Olino website.

CONTACTBelow you can submit any questions you might have. Your message will be dealt with as soon as possible.Would you prefer contact by phone? You can reach us from Monday till Friday between 09:00 and 17:00 hours on:+31 (0)591 - 71 48 20

Top formName *

Company name

E-mail address *

Phone numberMessage *

* mandatory fieldsend