Hogwarts - my remix · Hogwarts - my remix VIEW IN BROWSER updated 15. 8. 2019 | published 15. 8....
3
Loafers Lodge Hogwarts - my remix VIEW IN BROWSER updated 15. 8. 2019 | published 15. 8. 2019 PRUSAPRINTERS Summary This is my remix of the fantastic Hogwarts model by falloutboy2015 . Unfortunately my .4 nozzle couldn't print the original, so I tried some of the other remixes. They were no good. The one I tried failed spectacularly because of slicing problems. An investigation into the mesh file showed more than 8900 errors in the mesh. A massive amount of overlaying edges and faces, as well as loads of redundant vertices. So I set about to remake the whole model. This is the one. No errors. It is manifold. It works on .4 nozzles. The model is very much simplyfied from the original. I didn't see the point in having details that couldn't print anyway. After spending all those hours remaking the model I tip my hat to the original creator. Well done. Cudos to you. The print you see on the pictures are straight from the printbed. No after print work has been done. Blend file included for those of you who want more detail :)
Transcript of Hogwarts - my remix · Hogwarts - my remix VIEW IN BROWSER updated 15. 8. 2019 | published 15. 8....
Loafers Lodge
Hogwarts - my remix
VIEW IN BROWSER
updated 15. 8. 2019 | published 15. 8. 2019
PRUSAPRINTERS
Summary
This is my remix of the fantastic Hogwarts model by falloutboy2015 .Unfortunately my .4 nozzle couldn't print the original, so I tried some ofthe other remixes.
They were no good. The one I tried failed spectacularly because of slicingproblems. An investigation into the mesh file showed more than 8900errors in the mesh. A massive amount of overlaying edges and faces, aswell as loads of redundant vertices.
So I set about to remake the whole model. This is the one. No errors. It ismanifold. It works on .4 nozzles.
The model is very much simplyfied from the original. I didn't see the pointin having details that couldn't print anyway.
After spending all those hours remaking the model I tip my hat to theoriginal creator. Well done. Cudos to you.
The print you see on the pictures are straight from the printbed. No afterprint work has been done.
Blend file included for those of you who want more detail :)
34 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
PLA
435 g
d
MK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
51.7 MB
34.11 hrs f 0.20 mm k 0.40 mm h PLA 435.00 g d MK3/S
updated 15. 8. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
20.1 MBupdated 15. 8. 2019
29.0 MBupdated 15. 8. 2019
World & scans > Architecture & Urbanism
Straight out of the box. No supports. no nothing.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
hogwarts_02mm_pla_mk3_1d10h7m.gcode
hogwarts-ny7.stl
hogwarts-ny7.blend
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
