HoEff-QuickCheck: A Quick Evaluation Method For Existing ......EnTool2013-Symposium:...
Transcript of HoEff-QuickCheck: A Quick Evaluation Method For Existing ......EnTool2013-Symposium:...
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 1
June 2013
Author: Rene Regel
University of Applied Sciences Munich
Co-authors: Prof. Dr. Werner Jensch
University of Applied Sciences Munich
Oliver Jainta
Ebert Ingenieure
EnTool 2013 Symposium, Dresden, 06/13/2013
HoEff-QuickCheck: A Quick Evaluation Method For
Existing University Buildings
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 2
June 2013
Agenda
1. Energy efficiency and cost as challenges
2. QuickCheck-Tool: Gather Data for the evaluation
3. Report Strategy
4. HoEff Infoportal: find and apply measurements
5. Quick Energy Assessment
6. Outlook: HoEff-CIM
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 3
June 2013
1. Energy efficiency and cost as challenges
Size and quantity of buildings
Large variety of building types
Heterogeneous occupancy
Different HVAC systems for different
functional requirements
Field of expertise and research
activity
Characteristics of university buildings:
Photos: Ebert-Ingenieure
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 4
June 2013
1. Energy efficiency and cost as challenges
Common building assessment methods from a qualitative perspective
low
/ less
hig
h / b
ett
er
low
/ less
hig
h / b
ett
er
VDI 3807 whole building simulation DIN V 18599
method:
source: Regel, Jensch, Lang: The Pareto Principle for the Energy Assessment of Heterogeneous and Complex University Buildings - A Comparison; sb13-munich, Munich, 2013
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 5
June 2013
HoEff - Infoportal
1. Energy efficiency and cost as challenges
Evaluation of buildings
Thermal characteristics
Info about HVAC systems
Energy saving potential
Data crunching
Simulation
Performance indicators
QuickCheck - Tool
QuickCheck - Tool
Gather data Report
Characteristic Values
Improvement
An Approach of a quick assessment method:
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 6
June 2013
2. QuickCheck-Tool: Gather Data for the evaluation
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 7
June 2013
2. QuickCheck-Tool: Gather Data for the evaluation
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 8
June 2013
3. Report Strategy
Basic information of the building
Location of the building
Floor space partitioning
Benchmarking of energy use (heat & electricity)
Evaluation of:
Hvac systems
Thermal characteristics
Information on one sheet (size A4)
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 9
June 2013
4. HoEff Infoportal: find and apply measurements
www.hoeff.info
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 10
June 2013
4. HoEff Infoportal: find and apply measurements
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 11
June 2013
source: Regel, Jensch, Lang: The Pareto Principle for the Energy Assessment of Heterogeneous and Complex University Buildings - A Comparison; sb13-munich, Munich, 2013
5. Quick Energy Assessment
• Using reference rooms instead of a
whole building model
• Characteristic values to estimate the
energy demand according to room
level
• Energy classes describe the
occupancy/function of the building
energy
class
office, laboratory,
lecture hall, etc.
Reduction of the required amount of input data – energy classes
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 12
June 2013
5. Quick Energy Assessment
Comparison: simple and detail method
M1: reference room method (simple)
M2: whole building simulation (detail)
• 4 different buildings
• 10 building classes
• Not yet suitable for every building
• Time demand: M1 <<< M2 !
source: Regel, Jensch, Lang: The Pareto Principle for the Energy Assessment of Heterogeneous and Complex University Buildings - A Comparison; sb13-munich, Munich, 2013
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 13
June 2013
5. Quick Energy Assessment
Priority list for the retrofit
Correlation shows:
• Individual building performance
• Cost saving potential
Goals to achieve
• High energy efficiency
• Low energy costs
Universities
as role models have to
achieve both goals!
Photos: Ebert-Ingenieure source: Regel, Jensch, Lang: The Pareto Principle for the Energy Assessment of Heterogeneous and Complex University Buildings - A Comparison; sb13-munich, Munich, 2013
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 14
June 2013 © istockphoto 000012677840
Campus = buildings + function
Information = data + data-handling
Modelling = methods + tools
6. Outlook: HoEff - CIM
What`s about HoEff - CIM ?
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 15
June 2013
6. Outlook: HoEff-CIM
Retrofit list for the LMU building stock
Improvement of the tools
Simplified assessment methods
Automated report function
Further development of www.hoeff.info
EnTool2013-Symposium: HoEff-QuickCheck - A Quick Evaluation Method
Rene Regel
slide 16
June 2013
Thank You very much for Your attention! Thank You very much for Your attention!
Rene Regel
Competence Center Energy-Efficient Buildings
www.hm.cceg.edu
Acknowledgement
The presentation is based on the results of the
research project:
„Die Hochschule auf dem Weg zu einem
energieeffizienten Gebäudebetrieb“
(support-code: 0327470A)