Hitendra Saundankar · Web viewRahul Kumar, Kishor Biswas, Dinesh Atul Maurya, Madhubala and Sanjay...

Day # 1 - Technical SessionProgramme Schedule

Subject : Polymer Science & TechnologyTheme : Nano-compositesTechnical Session: TS# 1Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Seminar Hall

INV 1 Effects of carbon nanotubes on the flame retardancy of intumescent flame-retarded nylon 6Chang Lu, Dian yang, Xinhui Huang, Jinjin Yang, Jie Sun, Shaoqing Xu and Yuqing Zhang

Key Lab of Polymer Science and Nanotechnology, Chemical Engineering & Pharmaceutics School, Henan University of Sci. and Tech., Luoyang 471003, China, [email protected]

INV 2 TiO2 nanoparticle incorporated polymer nanocomposite films for food packaging applicationsJohnsy George and S. N. Sabapathy

Food Engineering and Packaging Division, Defence Food Research laboratory, Siddarthanagar, Mysore-570011, Karnataka, India, [email protected]

OPS 1 Thermal, mechanical and morphological properties of vegetable oil based polyurethane/ epoxy nanocomposites

Aiswarea Mathew, Smita Mohanty and Sanjay K NayakCentral Institute of Plastics Engineering and Technology (CIPET), TVK Industrial Estate, Guindy,

Chennai-600032, T.N., India, aiswarea@ gmail.comOPS 2 Influence of Different types of layered double hydroxides (LDH) on the physical characteristics of

polypropylene/LDH nanocompositesBaku Nagendra, Sijla Rosely C.V and E. Bhoje Gowda

Materials Science & Technology Division, CSIR-National Institute for Interdisciplinary Science and Technology (CSIR-NIIST) Trivandrum, Kerala– 695019, India, [email protected]

OPS 3 Poly (vinyl alcohol)/Sodium Zincate Nano composite films as multifunctional Luminescent Down – Shifting layers (LDS): A straight forward stratagem to extend the short-wavelength limit of solar

cells through enhanced UV-Light harvestingNithin Kundachira Subramani, K.N. Shilpa‡, S. Sachhidananda and Siddaramaiah

Postgraduate Department of Chemistry, JSS College, Mysuru - 570 025, Karnataka, IndiaOPS 4 Investigation of Structural, mechanical and electrical properties of Novel hydroxy propyl methyl

cellulose-CuO nanocomposite filmsK. Vijayashree, K. Sheshappa Rai and T. Demappa

1Post graduate Department of Studies and Research in Polymer Science, University of Mysuru, Sir MVPG Centre, T ubinakere, Mandya-71402, Karnataka, India, email: [email protected]

OPS 5 Investigations on mechanical behavior of areca leaf-carbon nanotube reinforced hybrid epoxy composites

M.M. Sujay, H.R. Shivakumar, M. Sunil Kumar, S.G. Gopalakrishna.Centre for Multidisciplinary Research in Advanced Materials & Tech., KVG College of Eng., Sullia, DK

OPS 6 Effect of Micro and nano fillers on Polarization and depolarization Currents in Fiber-Reinforced Epoxy Nanocomposites

M. Suchitra and N. M. Renukappa.Department of Electronics and Communication Engg., Sri Jayachamarajendra College of Engineering,

Mysore – 570 006, India, [email protected]

Subject : Polymer Science & TechnologyTheme : Material Science/ Smart polymersTechnical Session : TS# 2Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Room No.4

INV 3 Development of biodegradable films from marine ingredients incorporated with natural anti-microbiological agents and its application as packaging material for extension shelf life of

pangasius fish fillet

mailto:[email protected]


Rajeshwar S. MatcheFood Packaging Tech., CSIR- Central Food Technological Research Institute, Mysore 570020

INV 4 Mechanical and Barrier Properties of Hydroxy Propyl Methyl Cellulose (HPMC) Edible Polymer Films with Plasticizer Combinations

Mahadevaiah, L.R. Shivakumara and T. DemappaDept of Polymer Science; University of Mysore, Sir M.V.P.G. Center, Tubinakere, Mandya-571402,

Karnataka, India, [email protected] 53 Molecular, Crystalline and Lamellar Length-scale Changes in the Poly(ʟ-lactide) (PLLA)

during Cyclopentanone (CPO) Desorption in PLLA/CPO Co-crystalsP. Shaiju and E. Bhoje Gowda.

Materials Science and Technology Division, CSIR-National Institute for Interdisciplinary Science and Technology, Trivandrum 695 019, Kerala, India, [email protected]

OPS 54 Microwave Assisted Synthesis of Diallyldimethylammonium Chloride Grafted Locust Bean Gum: Swelling and Dye Adsorption Studies

Sirajo Abubakar Zauro and B. Vishalakshi2Department of Post-Graduate Studies and Research in Chemistry, Mangalore University,

Mangalagangothri- 574 199 (DK), Karanataka, India, [email protected] 55 Thermal Analysis of Composite Conduits

H.V. Gautham, K. Manjunath and T. Rangaswamy.Department of Mechanical Engineering, Government Engineering College, Hassan, Karnataka, India

[email protected], [email protected] 56 Graphene oxide as effective filler in enhancing the pervaporation performance

D.P. Suhas, T.M. Aminabhavi and A.V. Raghu.Dept. of Chemistry, St. Joseph’s College, Langford Road, Bengaluru, [email protected]

OPS 57 Photocatalytic Degradation of Indigo Carmine Under Solar/UV Irradiance Using Hydrothermally Developed Lithium Zincate Nano Powders

Nithin Kundachira Subramani, S. Sachhidananda, B.K. Kendaganna swamy, Shilpa, K.N.Postgraduate Department of Chemistry, JSS College, Mysuru - 570 025, Karnataka, India

OPS 58 Fabrication of room temperature formaldehyde sensor using PANI-MnO2 composite pellets and films

Varun Gupta and R. SureshDept. of Chemical Engg., R.V. College of Engg., Bengaluru -560059, [email protected]

OPS 96 Mechanical and thermal luorides of glass fiber reinforced nylon 6/arylonitrile butadiene styrene composites for automobile applications

M.R. Shankre Gowda1, B.S. Madhukar1, S. Srinivas2 and Siddaramaiah1*

1Department of Polymer Science and Technology, Sri Jayachamarajendra College of Engineering, Mysore – 570 006, India

2Brakes India Limited, Sundaram Polymers Division, Nanjanagudu – 571 302, India


Subject : Polymer Science & Technology Theme : Nano-compositesTechnical Session: TS#3Date: 27th May 2016 Time: 11.45 pm – 1.45 pm Venue: Room No.1

INV 5 Polysaccharide Based Nanocomposite Hydrogels: Agricultural and Industrial ApplicationsGangadhara B., Arun Krishna K., and Vishalakshi, B.

Department of Post-Graduate Studies & Research in Chemistry,Mangalore University, Mangalagangothri-574199 (DK), Karnataka, [email protected]

INV 6 Antibacterial properties of silver-polycarbonate nanocomposite synthesised by gamma radiation-assisted diffusion method

P. Ramya, K. Hareesh, A.V.Deore, S. Samarin, J. F. Williams, G. Sanjeev, N.A. Dhole, K. M. Kodam, V. N. Bhoraskar, S. D. Dhole

ARC Centre for Antimatter-Matter Studies, School of Physics, University of Western Australia, Crawley, WA 6009, Australia



OPS 7 Separation of isopropanol/water mixtures by Nanocomposite SA-GL membranes: Membrane synthesis, Characterization and Pervaporation performance

Y. Maruthi, K. Chowdoji Rao, M.C.S. SubhaDepartment of Polymer Science & Tech, Sri Krishnadevaraya University, Anantapuramu, A.P.,

IndiaOPS 8 Removal of heavy metals from water using polymer/ metal oxide based nanocomposites

Charulatha M.S, M. A. Lourdu Antony Raj and A. R. Phani.Department of Chemical Engg., RV College of Engineering, Bengaluru 560059, Karnataka, India

OPS 9 Preparation of Citric Acid-Based Nano Hydroxyapatite Composite GraftPriya Chaurasia and P.C. Deepika

Department of Periodontology, JSS Dental College and Hospital, JSS University, Mysuru, Karnataka, India, [email protected]

OPS 10 Preparation and characterization of novel PMMA/PA12 composites reinforced with pure and functionalized single walled carbon nanotubes

N.Mohan Babu, D.Suresh Kumar, N.Bikshamaiah, S.Ramesh and K.Madhukar1Department of Physics, South Campus, Telangana University, Biknur.

2Department of Physics, University PG College, Sathavahana University, Godavarikhani.Department of Physics, Mahatma Gandhi University, Nalgonda.

4Department of Physics, Osmania University, Hyderabad, Telangana, [email protected], OPS 11 A Novel Greener Approach for the Fabrication of Polyethylene-g-Starch Nanoparticle

BiocompositesSheeja, Manaf O, Juraij K, Sujith A

Material Research Laboratory, Department of Chemistry, NITC, Calicut, Kerala, India [email protected]

OPS 12 Fabrication and Properties of Thermoplastic Starch based Green Nanocomposites Reinforced with Graphene Oxide

D. Suresh Kumar, N. Bikshamaiah, N. Mohan Babu, S.Ramesh and K. MadhukarDepartment of Physics,University PG College, Sathavahana University, Godavarikhani.

[email protected], [email protected] 13 Synthesis and Characterisation of Graphene Oxide and their Chitosan Based Biocomposites

Shyamili K.S., Shetty Ravindra Rama and S.K.RaiPolymer Composites Laboratory, Department of Polymer Science, Sir M.V.P.G. Centre, University

of Mysore, Mandya-571 402, Karnataka, India, [email protected]

Subject : Polymer Science & TechnologyTheme : Polymer BlendsTechnical Session: TS#4Date: 27th May 2016 Time: 11.45 am – 1.45 pm Venue: Room No.4

INV 7 Development of PPE/PS blends with special Extruder and process designPrakash Hadimani, H.N Narasimha Murthy, Rajalakshmi Mudbidre, Pradeep Bakshi

STEER, Peenya Industrial Area, Bangalore -560058, Karnataka, IndiaINV 8 Cellulose microfibers blended in silk fibroin for bone implants (w)

Priya Dasan, KDepartment of Chemistry, Material Chemistry Division, SAS, VIT University, Vellore, TN, India,

Ph No.: +91 416 2202696, [email protected] 9 Is Pervaporation a vital separation process?

Soney C George and Thomasukutty JoseCentre For Nano Science and Technology, Department of Basic Sciences, Amal Jyothi College of

Engineering, Kanjirapally-686518, [email protected], [email protected] 16 Erosion behavior of polyoxy methylene/polytetrafluroethylene blend composites: Effect of short

glass fiber and ceramic fillersKrishna and B. Suresha

Department of Mechanical Engineering, Vidyavardhaka Polytechnic, Mysuru-570002, [email protected], [email protected]

OPS 35 Exploring the role of epoxidized soybean oil towards improving the mechanical and thermal properties of poly(lactic acid)/ thermoplastic starch blends




Sukhila Krishnan, Priyanka Pandey, Smita Mohanty and Sanjay K.NayakLaboratory for Advanced Research in Polymeric Materials (LARPM),

Central Institute of Plastic Engineering and Tech., Bhubaneswar, Odisha, [email protected] 36 Effect of rubber based compatibilizer on mechanical and thermal properties of PMMA/PVC

blendsSunil S Suresh, Smita Mohanty and S. K Nayak

Laboratory for Advanced Research in Polymeric Materials, CIPET, Bhubaneswar, Odisha, [email protected]

OPS 37 Novel Polymer Blends Crosslinked via Electron Beam Irradiation for Cable Sheathing Application

Joyeeta Dutta and Kinsuk NaskarRubber Technology Centre, Indian Institute of Technology, Kharagpur, India- 721302.

[email protected] 38 Miscibility Studies of Hydroxy Propyl Methyl Cellulose/poly (ethylene glycol) blends in water

by viscosity, density, Refractive index and ultrasonic velocity methodsHadadi Yallappa, J.Srinivasa, J.Sannappa and T. Demappa.

Dept. of Physics, SJVP College Autonomous, Harihara, Davanagere, [email protected] 39 Structural and electrical studies on PVA/PVP blends filled with zinc oxide-cerium oxide

nanoparticlesH.N.Chandrakala, Rajeshwari, D.U, Shivakumaraiah and Siddaramaiah

Department of Chemistry, Kalpataru Institute of Technology, Tiptur-572202, Karnataka, IndiaOPS 40 An insight into the blends of synthetic peptides with other polymers -A review

Mahesh B, Nanjundaswamy G S, Channe Gowda D and SiddaramaiahJ.S.S Academy of Technical Education, Dr Vishnuvardhan Road, Bengaluru – 560 060

DOS in Chemistry, University of Mysore, Mysuru-570 006Department of Polym. Sci. and Tech., Sri Jayachamarajendra College of Engg., Mysuru- 06

[email protected]

Subject : Polymer Science & TechnologyTheme : Bio and green compositesTechnical Session: TS#5Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.1

INV 10 Non-edible seed cake as fillers for bio-composite preparationsM. Veerabhadra Swamy

Dept. of Science & Humanities, P E S University, BSK III Stage, Bangalore, India, [email protected] 11 An Investigation on the Effect of Silica Aerogel Content on thermal and Mechanical Properties

of Sisal/PLA Composites.C. Venkata Prasad and D. Gnanasekaran

Dielectric Materials Division, Central Power Research Institute, India, [email protected] 23 An efficient approach towards development of Hazard-Free Green Elastomeric Composites.

Partheban.M and Kinsuk Naskar.Rubber Technology Centre, IIT-Kharagpur, Kharagpur-721302, West Bengal, [email protected]

OPS 24 Tensile and fire retardant properties of chitosan and APP encapsulated flax fabric/ thermoplastic starch green composites.

M. N. Prabhakar, Atta ur Rehaman Shah and Jung-Il Song.School of Mechatronics, Changwon National University, Changwon, South Korea– 641 773.

[email protected] 25 Waste silk fiber reinforced polymer matrix composites: A review.

S.M. Darshan and B. Suresha2* and G.S. DivyaDepartment of Mechanical Engineering, Christ University, Bengaluru - 560029, India,

[email protected] 26 Fabrication and characterization of natural fiber reinforced epoxy composites.

Dhiresh Bajpai, Ekansh Singh, Avinash Barti, Entjar Hussain T, Mamatha,T.G., and A.N. Veerendra Kumar.

Department of Mechanical Engineering, JSS Academy of Technical Education, Noida, UP, IndiaOPS 27 Recent developments of natural fiber reinforced thermoset polymer composites and their

mechanical properties.Divya G.S, S.M. Darshan and B. Suresha

Department of Automobile Engg, Dayanada Sagar College of Engineering, Bengaluru-560078, India, [email protected]

OPS 28 Effectiveness of Areca (Betel) Fiber as a Reinforcing Material in Eco-Friendly Composites - A Review

Raghuveer H. Desai; L. Krishna murthy and T.N. Shridhar.Lighting CoE, Honeywell Tech., Solutions Pvt. Ltd., Bangalore, [email protected]

OPS 29 A study on the effect of acidic, basic and polymeric surface treatment on mechanical properties of Abaca/Vinyl ester composite

Syed Nabeel Ahmed, M.N. Prabhakar, Atta Ur Rehman Shah, Zhang wei, Jung IL SongDepartment of Mechanical Engineering, Changwon National University, Changwon, Korea,

[email protected]

Subject : Polymer Science & TechnologyTheme : Polymer SynthesisTechnical Session: TS#6Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No. 2

INV 12 Synthesis of multi-responsive hyperbranched poly(amido amine)s via Michael-addition reactions for potential gene delivery

Zhiqiang Yu*, Xiao Wang, Dahu Yao and Yuqing ZhangChemical Engineering And Pharmaceutical Department, Henan University of Sci. and Tech.,

Luoyang, 471023, Henan, China, [email protected] 13 Kinetics of Radical Chain Polymerization

M.P. YashodaDept. of Chemistry, Manipal Institute of Technology, Manipal, India, [email protected]

OPS 71 Preparation and optimization of biobased epoxy from epoxidized vegetable oilSudha G S, Hemo jyoti Kalita, Smita Mohanty & Sanjay Kumar Nayak

Central Institute of Plastics Engineering and Technology (CIPET), Chennai, [email protected]

OPS 72 Process of making Copolymers from Quaternary Ammonium Itachonic Di-Esters and Methyl methacrylate against Superbugs

G. J. Dominic, M. P. Yashoda, S. PrasannakumarDepartment of Chemistry, Manipal Institute of Technology, Manipal University, India

OPS 73 A Comparative Study on the Synthesis, Characterization and Antimicrobial Properties of Complexes of Poly (vinyl pyrrolidone) with Co(II), Ni(II) and Cu(II)

M.K. Veeraiah, Anasuya K.V., Hemalatha, P, Anupama, C and Mousumi DasDepartment of Chemistry, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, INDIA,

[email protected], [email protected] 74 Novel Method for Manufacturing of PF Resole Through A Continuous Process

Abdul Habid, P, Lity Alen Varghese, Mohandas and G. UnnikrishnanDepartment of Chemical Engineering, NIT Kozhikode, Kerala, India

OPS 75 Facile Synthesis and Fine Tuning of Optical Properties of Tertiary Amine based 1,3,4- Oxadiazole Containing π- Conjugated PolymerNimisha Kaippamangalath, and G. Unnikrishnan

Polymer Science and Technology Laboratory, National Institute of Technology, Calicut- 673601, Kerala, India, [email protected], [email protected]

OPS 76 Coil-coil type di-block copolymers: Synthesis, characterization and their optical and electronic properties

J. Gopinath, M. Aravind, and A. V. Sesha SainathPolymers and Functional Materials Division, CSIR-Indian Institute of Chemical Technology,

Hyderabad -500 007, Telangana, India, [email protected]

Subject : Polymer Science & TechnologyTheme : Advanced polymer composites


Technical Session: TS#7Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.4

INV 14 Agricultural applications of polymersK. Chowdoji Rao

Department of Polymer Science & Technology, S. K. University, Ananthapuramu – 515 003, A.P.INV 15 A process for zinc coatings on semi-rigid packaging by wire spray

A.Ramakrishna and C.S. RameshDefence Food Research Laboratory, DRDO, Mysuru, Karnataka, India

OPS 14 Analysis of delamination in carbon fibre reinforced polymer composite using finite element method

Shahabaz, S.M, Nagaraj Shetty, Sharma S.S*Dept. of Mech. Engg., Manipal University Jaipur, Jaipur

OPS 15 Structure-Property Relationship in CoCl2 Doped Hydroxy Propyl Methyl Cellulose CompositesThejas Urs G, Gowtham G K, Y. Sangappa, H Somashekarappa & R Somashekar

Center for Materials Science, University of Mysore, Vijnana Bhavan, Mysore – 570006, [email protected]

OPS 17 Structural Health Monitoring of Epoxy/E-Glass fibre ConduitsA.P. Pavan Kumar, K.R. Channakeshava, T. Rangaswamy and K. Manjunath

Department of Mechanical Engineering, Government Engineering College, Hassan, Karnataka, [email protected], [email protected]

OPS 18 Enhancement of mechanical properties and wear resistance of epoxy: glass fiber, basalt fiber, PTFE and graphite

B.S. Kanthraju and B. SureshaDepartment of Mechanical Engg,, Don Bosco Institute of Tech., Bengaluru, [email protected]

OPS 19 Analysis on Mechanical and Dynamic behavior of Granite Epoxy Composites with Cast Iron Particulates as Filler

S.S. Balakrishna, H Girish, G C Mohan Kumar and S. Narendranath, Dept. of Mechanical Engineering, Sahyadri College of Engineering, Mangalore - 575007, India

Dept. of Mechanical Engineering, NITK, Surathkal, [email protected] 21 Bagasse Fiber/Functionalized Polyethylene Composites by Palsule Process Density, Void

Content and Thermal PropertiesAkshay Khevariya, Kishor Biswas, Dinesh, Atul Maurya, Prathmesh Garg and Sanjay Palsule

Department of Polymer & Process Engineering, Indian Institute of Technology RoorkeeDPP IIT-R SRE Campus Paper Mill Road Saharanpur – 247 001, India

[email protected], [email protected] 22 Mechanical, Microstuructural and PALS studies: PU/curcumin green composites

B.S. Madhukar, T. Sagar, P. Ramya, D.G.Badregowda, V. Annadurai, T.V.M.G. Sasikala and Siddaramaiah

Department of Polymer & Technology, Sri Jayachamarajendra College of Engineering, Mysuru, Karnataka, India, [email protected]

Subject : Polymer Science & TechnologyTheme : Polymers for electrical and electronic applicationTechnical Session: TS#8Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.5

INV 16 Green Chemistry Towards Sustainable DevelopmentSumanda Bandyopadhyay

SABIC Research and Technology Pvt. Ltd., Bengaluru, India, [email protected] 17 Microwave assisted processing of polymer matrix composites - A rapid and energy-efficient

alternativeSandhya Rao

Centre for Societal Missions & Special Technologies, CSIR-NAL, Bengaluru, Karnataka, IndiaOPS 77 Structure - Property Relationship in Ethylene Octene Copolymer (EOC) - Polydimethyl

Siloxane (PDMS) based TPEs for cable insulation applicationsPadmanabhan R, Kinsuk Naskar, and Golok B Nando

Rubber Technology Centre, Indian Institute of Technology, Kharagpur, West Bengal, 721302, [email protected]

OPS 78 Blue Luminescent Polycarbonate/Halloysite Nanotube Films a Promising Material for Dielectrics

G. Santhosh, B.S. Madhukar, G.P. Nayaka and SiddaramaiahDepartment of Mechanical Engineering, NMAMIT, Nitte - 574110, India

OPS 79 Effect of Lithium Chloride Content on Spectral, Electrical and Microstructural Behaviors of Polyvinyl alcohol Composites

Gayitri, H.M, Gnanaprakash, A.P, Madhukar B.S, Hemarju B.C and SiddaramaiahDepartment of Electronics and Communication Engg., Sri Jayachamarajendra College of Engg.,

Mysore–570 006, [email protected] 80 Copper doped Zirconia nano fillers functionalized PVA dielectric films as Highly

Flexible Visible band pass filters for Opto-electronic applicationsNithin Kundachira Subramani, Sachhidananda, S., Chiranjeevi, K., Ranjith, M.S. and SiddaramaiahDepartment of Polymer Science and Tech., Sri Jayachamarajendra College of Engineering, Mysuru

OPS 81 Effect of detection of dopamine on the reinforcement of carbon nanotubes in epoxy at carbon past modified electrode

H. Vidya and B.E. Kumara SwamyDepartment of PG Studies and Research in Industrial Chemistry, Kuvempu University, Jnana

Sahyadri, Shankaraghatta-577451, Shimoga, Karnataka, IndiaOPS 82 Dielectric Behaviors of Reversibly Stretchable Sodium Doped manganese dioxide fabricated

poly (vinyl alcohol) Nano Composites for Super Capacitor ApplicationsChampa,T, Nithin Kundachira Subramani, Sachhidananda, S. and Siddaramaiah

Department of Polymer Science and Technology, Sri Jayachamarajendra College of Engineering, Mysuru - 570 006, Karnataka, India

Subject : Polymer Science & TechnologyTheme : Polymeric Hydrogels and Drug DeliveryTechnical Session: TS#9Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Seminar Hall

INV 18 . Multi Responsive Interpenetrating Polymeric Network Hydrogels for Controlled Release of Chemotherapeutic Agents

K.S.V. Krishna RaoPolymer Biomaterial Design and Synthesis Laboratory, Department of Chemistry, Yogi Vemana

University, Kadapa- 516003, A.P., [email protected], [email protected] 19 Effect of Radiation on Polymer Blends and Their Drug Release Behavior

H.R. Shivakumar Centre for Multidisciplinary Research in Advanced Materials and Technology,

Department of Chemistry, KVG College of Engineering Sullia, [email protected] 41 Polyelectrolyte hydrogels based on 2-Acrylamido-2-methyl-1-propane sulfonic acid (AMPS);

Synthesis and characterizationK.M. Mahadevaswamy and Siddaramaiah

Hollingsworth & Vose Advanced Materials India Private Limited, Mysore, Karnataka, IndiaOPS 42 Synthesis and Swelling behavior of sodium alginate / poly (vinyl alcohol ) PVA hydrogels

Shivakumara L.R and T. DemappaDepartment of Post graduate Studies and Research in Polymer Science, University of Mysore,

SirM.V.P.G. Centre, Tubinakere, Mandya, Karnataka, India, [email protected] 43 Design and Evaluation of Gelatin/poly (Acrylamide-co-Sodium Methacrylate) semi IPN

hydrogels for the controlled release of relaxesene hydrochlorideS.K. Sindhu, D.V. Gowda and Siddaramaiah

Department of Chemistry, Vidya Vikas Institute of Engineering and Technology, Mysuru - 570028, Karnataka, India, [email protected]

OPS 44 Synthesis and characterization of Poly(N,N’- diethyl acrylamide) macro-hydrogels for drug delivery application

Sushma I Havanur and P.E. Jagadeesh BabuDepartment of Chemical Engineering, National Institute of Karnataka, Surathkal – 575025,

Karnataka, India, [email protected] 45 Development and Characterization of Poly(Lactide-Co-Glycolide) Based Nanoparticles Loaded

with Flutamide, an Anticancer Drug for Controlled Drug DeliveryP. Kumara Babu, M.C.S.Subha and K. Chowdoji Rao

Department of Polymer Science & Tech., Sri Krishnadevaraya University, Anantapuramu, AP, IndiaOPS 46 Development of Poly(N-vinylcaprolactam) Based Stimuli Responsive Semi-IPN Hydrogels for

Controlled Release of 5-FlurouracilN. Sivagangi Reddy and K.S.V. Krishna Rao

Polymer Biomaterial Design and Synthesis Laboratory, Department of Chemistry, Yogi Vemana University, Kadapa. Andhra Pradesh, India. [email protected]

Subject : Polymer Science & TechnologyTheme : Bio and green compositesTechnical Session: TS#10Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No. 1

INV 20 Development of Biodegradable polymers for pollution free environmentM.C.S. Subha

Department of Chemistry, Sri Krishnadevaraya University, Ananthapuram -515 003INV 21 Processed Marine Corals Reinforced Polymer Bio-Composites

G.C. Mohan Kumar and P. Kamalbabu Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal -

575025, Mangalore, [email protected] 22 Drug encapsulated Biodegradable Nanomaterials to treat Inflammation

Guru Bharath Raja, Anusha Prabhu and Madiha AhamadDepartment of Biotechnology, Manipal Institute of Technology, Manipal University, India

Email- [email protected] 20 Coconut Fiber / Functionalized Polyethylene Composites by Palsule Process Density, Void

Content and Thermal PropertiesRahul Kumar, Kishor Biswas, Dinesh Atul Maurya, Madhubala and Sanjay Palsule

Department of Polymer & Process Engineering, Indian Institute of Technology RoorkeeDPP IIT-R SRE Campus Paper Mill Road Saharanpur, India

[email protected], [email protected] 30 Effect of fiber orientation on the mechanical properties of uni-directional flax fiber/vinyl ester

compositeZhang wei, M.N. Prabhakar, Syed Nabeel Ahmed, Atta ur Rehman Shah, and Jung il Song

Department of Mechanical Engineering, Changwon National University, Changwon, [email protected]

OPS 31 Abaca-fabric/Vinyl ester composites:Fire retardants on the flammability, thermal stability, and mechanical properties

Zhenhua Li, Atta ur Rehman Shah, M. N. Prabhakar, and Jung-il SongDepartment of Mechanical Engineering, Changwon National University, Changwon, Korea

[email protected] 32 Mechanical property evaluation of Sugar Cane Trash –Kevlar Pulp filler reinforced Epoxy

base Hybrid Polymer CompositesA.N. Veerendra Kumar and N. D. Jawali

Department of Mechanical Engineering, J S S Academy of Technical Education Noida.OPS 33 Preparation and Mechanical Characterization of Areca Bast Fiber Reinforced Epoxy

Composites M. Sunil Kumar S.G.Gopalakrishna and H.R. Shivakumar

Dept. of Mechanical Engineering And Research Centre, KVG. College of Engineering, Sullia, D.K, Karnataka, India, [email protected]

OPS 34 Abrasive Wear and Machinability Characterization of Coconut Shell Particle Reinforced Epoxy Green Composites

G. H. Manjunatha Chary and K Sabeel AhmedDepartment of Mechanical Engineering, Jawaharlal Nehru National College of Engineering,

Shivamogga – 577204, Karnataka, India, [email protected]

Subject : Polymer Science & TechnologyTheme : Material Science/ Smart polymersTechnical Session: TS#11Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No.3

INV 23 Super TPV: A New Generation Thermoplastic ElastomerKinsuk Naskar

Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, West Bengal, IndiaINV 24 Poly Aryl Ether Ketone Composites for Electrical Insulation, Thermal degradation and Fire

Performance CharacteristicsV.V.Pattanshetti, G.M.Shashidhara, Dhorali Gnanasekaran

Central Power Research Institute, Bangalore, Karnataka, IndiaINV 25 Nanofibers - Propertıes and Applications

D Vishakante GowdaDept. of Pharmaceutics, JSS College of Pharmacy, JSS University, S.S. Nagar, Mysuru-570 015,

Karnataka, India, [email protected] 59 Poly Caprolactone based Electrospun Nanofibers for Super hydrophobic Surface

C.R. Reshmi and A. SujithMaterials Research Laboratory, NIT-Calicut, Calicut-673601, Kerala, [email protected]

OPS 60 Physicochemical evaluation of polymeric bioengineering scaffold based on Electrospun PCL/Starch-g-PCL nanofibers

P. Sagitha, C. R. Reshmi, Sheeja, and A. SujithMaterials Research Laboratory, National Institute of Technology Calicut, Calicut

OPS 61 Antibacterial electrospun Polyvinyl pyrrolidone / Graphene Oxide nanofibrous membraneSuja P Sundaran, C.R Reshmi, and A.Sujith

Material research laboratory, Chemistry Department, NIT Calicut, Kerala, IndiaOPS 62 Preparation, and characterizations piezoelectric films of Rochelle salt and polyvinylidine

flourideManasvi H Paradkar, Baijayanti Ghosh, R Suresh, Naveen CS and A.R. Phani

Department of Chemical Engineering, R V College of Engineering, Bengaluru-560059, India2Innovative Nano and Micro Technologies, Pvt. Ltd., Bengaluru – 560059, India

OPS 63 Pervaporation separation of water – Isopropanol Mixture using H-ZSM-5 (SAR–240) Zeolite incorporated Sodium alginate (NaAlg) Membranes

U. Sajan Kumarji Rao, K. Sreenivasulu, K. Chowdoji Rao and M.C.S.SubhaDept.of Chemistry, Sri Krishnadevaray University, Anantapuramu -515 003, A.P, India

OPS 64 Modification, Fabrication and Characterization of Poly Lactic Acid (PLA) ScaffoldsShebi, A., and Lisa Sreejith

Soft Material Research Lab (SMRL), Department of Chemistry, N, Calicut, IndiaOPS 95 Effect of powder morphology on the material properties of stainless steel 17-4PH

feedstockcomposition used in Powder Injection Molding (PIM)B. N. Mukunda*, Preethi, S., and G.S Ananthapadmanabha

1Indo-US MIM Tec Pvt. Ltd., KIADB Industrial Area, Hoskote, Bangalore 562114, India2Department of Polymer Science & Technology, Sri Jayachamarajendra College of Engineering,

Mysore, Karnataka, India

Subject : Polymer Science & TechnologyTheme : Polymers for electrical and electronic applicationTechnical Session: TS#12Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No.4

INV 26 Organic Materials for Emerging Applications: Design, Synthesis, Characterization and Device Fabrication

V. Jayathirtha rao


Crop Protection Chemicals Division & Academy of Scientific & Innovative Research (AcSIR), CSIR-Indian Institute of Chemical Technology, Uppal Road Tarnaka Hyderabad-500007

INV 33 Viscoelastic Behaviour of PolymersG.M. Shashidhara

Department of Polymer Science & Engineering, Sri Jayachamarajendra College of Engineering, Mysuru – 570 006, Karnataka, India,

OPS 83 Enhanced electromagnetic interference shielding of graphene incorporated polymer compositesM. Praveen, P. Sampthkumaran and B.M. Nagabhushana

M.S. Ramaiah Institute of Technology, Bangalore-560 054, [email protected] 84 Structural, morphological and conductivity studies on polythiophene films for flexible

electronic applicationsVigesh. P and P.L. Muralidhara, Samyuktha. G. C, Baijayanti. G, C.V.S. Naveen and A.R.PhaniDepartment of Chemical Engineering, R.V. College of Engineering, Bengaluru, Karnataka, India

OPS 85 Irradiation Effect on the Ionic Conductivity of Solid Polymer Electrolyte SystemsManjunatha H, and Kumara swamy G N

Department of Physics, Amrita Vishwa Vidyapeetham, Bengaluru-560 035, India, [email protected]

OPS 86 Enhancing the structural orientation in thiophene derivative polymer through electric field and its effect on device characteristics

Khadija Kanwal Khanum, Arul K. Varman and Praveen C. RDepartment of Materials Engineering, Indian Institute of Science Bangalore – 12, Karnataka, India

OPS 87 Waste plastic pyrolysis using solar energyPramod B Parit, Sharat R Shetty, Winson R, D’ souza, Sitara S M

Department of Mechanical Engineering, MITE, Moodabidri, Karnataka, IndiaOPS 88 Amino Functionalized Polymer as Charge Transport Layer for Solar Cell Application

Hemavathi, B., R. Geetha Balakrishna and T.N. Ahipa Nanostructured Hybrid Functional Materials and Devices, Center for Nano and Material Sciences,

Jain University, Jain Global Campus, Bangalore, Karnataka, India [email protected], [email protected]

Subject : Polymer Science & TechnologyTheme : Advanced Polymer TechnologyTechnical Session: TS # 13Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No.5

INV 27 Compounding with twin screw extruders : New developments in process technologyPradeep Bakshi and Babu Padmanabhan

Steer Engineering Pvt. Ltd., Bengaluru, Karnataka, IndiaINV 28 Processing-Structure-Property Interrelationships in Polymeric Systems

Bhaskar Patham Staff Scientist, SABIC Technology and Innovation, Application Technologies SABIC Research and

Technology Pvt. Ltd., Bengaluru-562125, India, [email protected]

(OPS98)Functionalization of low Tg polymers and their properties

V Subrahmanian*, Sheik Mohammed and Prabhu KumarDepartment of Rubber and Plastics Technology, Anna University, MIT Campus, Chennai - 600 044,

India, [email protected] 89 Effect of powder morphology on the material properties of stainless steel 17-4PH feedstock

composition used in powder Injection Molding (PIM)B N Mukunda, Preethi S, and G.S Anantha Padmanabha

Indo-US MIM Tec Pvt. Ltd., KIADB Industrial Area, Hoskote, Bangalore, Karnataka, [email protected]

OPS 90 Sonochemical Synthesis of Polymethylmethacrylate-HNT by solution casting methodKishor Kumar M.J, Buruga Kezia, Jagannathan, T.K

Department of Chemical Engineering, NITK, Surathkal, Karnataka, [email protected] 91 Novel Method of Manufacturing Glass-Cellulose Epoxy Composites Through Semi-Automated

Draw Bar Coating TechniqueAshok, V. Uppin, Ananth Joshi, P.S. Shivakumar Gouda, I. Sridhar, Siddaramaiah and N.D. Jawali


Department of Mechanical Engineering, SDMCET, Dharwad, [email protected] OPS 92 Effect of Maleic anhydride Concentration in Grafting Reaction on ABS Copolymer and

Performance EvaluationO. Manaf and A. Sujith

Material Research Laboratory, Department of Chemistry, NIT Calicut, [email protected] 93 Polymeric Materials Used For Military Aircraft

Hitendra SaundankarManager (Design-Indigenisation), Hindustan Aeronautics Ltd (HAL), Nashik,

hitendra100@gmail. com, mailto:[email protected] 94 Viscoelastic behavior of montmorillonite filled PP/SBS blends : Application of Kerner model

G.M. Shashidhara and S.K. Kameshwari DeviDept. of Polymer Science and Tech., Sri Jayachamarajendra College of Engineering, Mysuru - 06

Day # 3 - Technical Session Programme Schedule

Subject : Polymer Science & TechnologyTheme : Material Science/ Smart polymersTechnical Session: TS # 15Date: 28th May 2016 Time: 2.00 pm – 4.00 pm Venue: Room No. 4

INV 29 Influence of co-solvents on thermoresponsive polymer in aqueous mediaDr. P. Venkatesu

Department of Chemistry, University of Delhi, Delhi – 110 007, [email protected] 30 Fuel cell humidification chamber manufacturing technique by using cross linked HDFE

polymersDr. T. Rangaswamy

Department of Mechanical Engg., Govt. Engineering College, Hassan - 573 201OPS 97 A Study of Inter-Micellar Interactions in Emulsion Polymerization

Akshay, NProduct Promoters, Specialty Products Division, No. 75 F, Hootagalli Industrial Area, Mysore - 16

OPS 65 Optimization of corona poling conditions of polyvinylidene fluoride films and hysteresis studiesJayanth Kumar, S., and Anjana Jain

Materials Science Division, CSIR - National Aerospace Laboratories, Bangalore, [email protected] 66 Studies on biodegradation of plastic packaging materials in soil bioreactor

Manoj Kumar B, Manonmani. H. K, Sabike Noobia, Mythri, SDepartment of Environmental Engineering, Sri Jayachamarajendra College of Engineering, Mysuru-

570006, Karnataka, India, [email protected], [email protected] 67 Effect of Glucose and Azo Benzene Functionalized MWNTs in Polysulphone Membranes and

Liquid Crystalline PolymersV. Santosha, A. Tejaswini, P. Veera Babu, A.V. Sesha Sainatha, A.V.R. Reddy

Polymers and Functional Materials Division, CSIR-Indian Institute of Chemical Technology, Hyderabad-07, Telangana, India.

Reverse Osmosis Membrane Division, CSIR-Central Salt and Marine Chemicals Research Institute, Bhavnagar 364002, Gujarat, India. [email protected], [email protected]

OPS 68 Shape memory polymers with improved hardness and shape memory performanceAbhilash J. Kottiyatil, Hemant Kumar Shukla, and Sheeja Sunil

Centre for Carbon Fibers and Prepregs, National Aerospace Laboratories, Bangalore. [email protected]

OPS 69 Design, Fabrication and Shape Memory Evaluation of Smart SMP ToolingKavitha Vallish Rao, Sandhya Rao, Revathi A, T.H. Samiullah and Dayananda, G.N

Center for Societal Missions and Special Technologies,CSIR-National Aerospace Laboratories, Bangalore, Karnataka, India

OPS 70 Estimation of Creep and Recovery of CTBN - epoxy Shape Memory Polymers under tensile loading




A.Revathi, Sendil Murugan, Sandhya Rao and Kavitha V RaoCentre for Societal Missions and Special Technologies, CSIR-National Aerospace Laboratories,

Bangalore, Karnataka, India, [email protected]

Subject : Polymer Science & TechnologyTheme : Polymeric Hydrogels and drug deliveryTechnical Session: TS #14Date: 28th May 2016 Time: 2.00 pm – 4.00 pm Venue: Seminar Hall

INV 31 Polymer Functionalized Magnetic Nanoparticles for Mucosal delivery applicationsVijaya Kumar Naidu Boya, Renn Lovett, Prashnath Kumar B, Murali Mohan Yallapu, Meena Jaggi,

Subhash C ChauhanDepartment of Materials Science and Nanotechnology, Y.V. University, Kadapa, A.P., India

INV 32 Chitin/Chitosan based nanomaterials in drug delivery system Sushil Kumar

Department of Chemical Engineering, Motilal Nehru National Institute of Technology, Allahabad, U.P., India, [email protected], [email protected]

OPS 47 Development of a new dual responsive poly (acryl amide-co-diallyldimethyl ammonium chloride) nanogel for drug delivery applicationsSiva Sankar Sana and Vijaya Kumar Naidu Boya

Department of Materials Science and Nanotechnology, Yogi Vemana University, Kadapa – 516 003, A.P., India, [email protected]

OPS 48 Gelatin-Alginate pH Sensitive Hydrogel Film for Controlled Targeted Drug DeliveryMuhammed Adnan and Lisa Sreejith

Soft Material Research Laboratory, Department of Chemistry, National institute of Technology, Calicut 673601, Kerala, India [email protected]

OPS 49 Formulation and Development of Electrospun fiber as a carrier for orally dissolving sponge in Alzheimer’s patients

Bhavya M.V, D.V Gowda, Afrasim moin, and Atul Sri VastavDept. of Pharmaceutics, JSS College of Pharmacy, JSS University, Mysore, [email protected]

OPS 50 Development and Evaluation of Porous Tablets for treatment of Enterotoxigenic Escherichia Coli Infection

Atul Srivastav and D.V. GowdaDept. of Pharmaceutics, JSS College of Pharmacy, JSS University, Sri Shivarathreeshwara Nagara,

Mysore-570015, Karnataka, India, [email protected] 51 Formulation Characterization and Evaluation of Nano Emul-Gel for Transdermal Delivery of

DrugsTibey Mary Koshi and D.V. Gowda

Dept. of Pharmaceutics, JSS College of Pharmacy, JSS University, Sri Shivarathreeshwara Nagara, Mysore – 570 015, Karnataka, India, [email protected]

OPS 52 A Comparative Study on the Anti Microbial Property of quaternised copolymers N-vinyl-pyrrolidone - Dimethyl amino Ethyl methacrylate and N-vinyl pyrrolidone - vinyl benzyl

chlorideM.K. Veeraiah, Hemalatha, P, K V Anasuya, Anupama, C and Mousami Das

Dept. of Chemistry, Govt. First Grade College, Koratagere, Tumkur Dist, [email protected]


Subject : InterdisciplinaryTheme : Nano TechnologyTechnical Session: TS# 1Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Room No.2


INV 33 Morphological effect on applications of nano metal oxidesB.M. Nagabhushana

Department of Chemistry, M.S. Ramaiah Institute of Technology, Bangalore, [email protected] 34 Needleless Melt Electrospinning for nanofiber production and its scaling-up

Haoyi LiSchool of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, China

INV 35 Recent Advances in Catalytic Materials for Chemical Industrial ApplicationsAnand B Halgeri

Poornarpajna Institute of Scientific Research, Sada Shivnagar, Bangalore–80OID 1 Green synthesis of silver nanoparticles from santalum album tender leaf extract and evaluation

of its antioxidant capacityParidhi Damle, Deeksha Hegde, Sneha Nayak, and C. Vaman Rao

Department of Biotechnology Engineering, NMAMIT, Udupi district, Nitte-574110, Karnataka, India

[email protected] 2 Synthesis and photoluminescence properties of Sm3+: SrTiO3 nanophosphor

N.P. Bhagya, P.A. Prashanth and B.M. NagabhushanaR & D Centre, Department of Chemistry, Sai Vidya Institute of Technology, Bengaluru- 560 064,

Karnataka, India, [email protected] 3 Preparation of Carbon Soot (nanoparticle): Analysis of Cell Parameters by Rietveld Method

G.K. Gowtham, G Thejas Urs, H Somashekarappa and R SomashekarDepartment of Physics Yuvaraja's college, University of Mysore, [email protected],ac.in

OID 4 Modeling of Two-Dimensional Patterns and their Fourier Transforms: Application to Nanomaterials

R. Soma shekar, Madhuri S R, Namitha N S, and Kusuma Urs M BDepartment of Studies in Physics, University of Mysore, [email protected],ac.in

OID 5 Green Synthesis of ZnO nanoparticles by Acalyphaindica and evaluation of antioxidant and cytotoxic activity

Mina Zare, K.Namratha and K.ByrappaCentre for Materials Science and Technology, Vijnana Bhavan, University of Mysore,

Mysore- 570006, Karnataka, India, [email protected] 6 Optical and Morphological Studies of ZnO-CeO2 Nanocomposite Synthesized via Surfactant

Assisted Hydrothermal MethodAbdo Hezam, K. Namratha and K. Byrappa

Materials Science and Technology, University of Mysore, Mysuru, [email protected]

Subject : InterdisciplinaryTheme : Electronic DevicesTechnical Session: TS# 2Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Room No.5

INV 36 Forward Osmosis: A Membrane Based Energy Efficient Process for Waste Treatment, Biomacro- molecules enrichment and value addition

A. Mahto, R. Meena and S.K. NatarajCentre for Nano and Material Sciences, Jain University, JGI Campus, Bangalore, Karnataka, India

[email protected]; [email protected] 37 Applications of Nano-Engineered Silicon-Germanium Heterojunction Bipolar Transistors for

Extreme Environment ElectronicsA. P. Gnana Prakash

Dept of Studies in Physics, University of Mysore, Mysore, [email protected] 24 Electrochemical activities of Melamine and its applications in aqueous rechargeable Li-ion

batteriesVijeth Rajashekar Shetty, G S Suresh and K M Mahadevan

Dept of Chemistry, NMKRV college for women, Jayanagara, Bangalore, [email protected] 25 Two-dimensional layered Na2FePO4F electrode in aqueous alkali electrolytes

Puttaswamy Rangaswamy, Gurukar Shivappa Suresh, and Mahadevan Malavalli KittappabDepartment of Chemistry and Research Center, N.M.K.R.V. College for Women, Jayanagar,

III block, Bangalore-560 011, Karnataka, India, [email protected]



http://www.sciencedirect.com/science/article/pii/S0927776513004189

http://www.sciencedirect.com/science/article/pii/S0927776513004189

OID 26 Li1.2Mn0.5Co0.13Ni0.37O2 cathode material for aqueous rechargeable Li-ion batteryH. Nalini, Puttaswamy Rangaswamy, Vijeth, R.S., Gurukar Shivappa, S

Dept. of Chemistry, N.M.K.R.V. College for Women, Jayanagar, Bangalore, [email protected]

OID 27 Electrochemical Sensors of Catechol at Poly-niacinamide Modified Carbon Paste Electrode: A Voltammetric Study

A.B. Teradale, S.D. Lamani, B.E. Kumara swamy, P.S. Ganesh and S.N. DasDept. of Chemistry, BLDEA’s College of Engineering and Technology, Vijayapur, Karnataka, India

Email: [email protected] 28 Up growth effect of cetyltrimethyl ammonium bromide with carbon paste electrode for the

electro-chemical determination of allo-purinol and its biological activitiesShekappa D Lamani and Amit B Teradale

Dept. of Chemistry, BLDEA’s S.B. Arts and K.C.P. Science College, Vijayapur, Karnataka, India. Email: [email protected]

OID 29 An Overview of Different Overhead Transmission Line ConductorsRashmi, V., Shivaprasad and Poornima

Department of Electrical and Electronics Engineering, Siddaganga Institute of Technology, Tumkur


Subject : InterdisciplinaryTheme : Nano TechnologyTechnical Session: TS#3Date: 27th May 2016 Time: 11.45 am – 1.45 pm Venue: Room No.3

INV 38 Biowaste based porous nano particles and their applications Gurumurthy Hegde

BMS R and D Centre, BMSCE, Bangalore, Karnataka, India INV 39 Microwave Processed Multiferroic Lead M Hexaferrite

Madhuri, W. and Prathap, S Department of Physics, School of Advanced Sciences, VIT University, Vellore 632 014, TN, India

[email protected] 7 Visible Photocatalytic Nanopowder ZnS:CuS For Industrial effluent Treatment Applications

Ashwanth Subramanian, Madhav Bhutada, Keshav Bhutada, A.R. Phani, Suresh, R, and Jose L. Endrino

Department of Chemical Engineering, R.V. College of Engineering, Bangalore, Karnataka, [email protected], [email protected]

OID 8 Green synthesis of hybrid silver nano structures using Cassia occidentalis plant leaf broth and their characterizations

Santhosh, A.S., Sandeep S., Kumara Swamy, N, Suresh, G. S., Melo, J.SDepartment of Chemistry, Sri Jayachamarajendra College of Engineering, Mysore 570006

OID 9 Green Assisted Synthesis of Nickel Doped Magnesium Oxide Nanoparticles and Its Photocatalytic Activity on Methylene Blue

Jeetendra Kulkarni, R. Ravishankar, H. Naga bhushana, R.B. Basavraj, K.S. Ananthraju,L. Renuka and Sangeeta M

Dept. of Chemical Engg, Dayananda Sagar University, Bangalore, [email protected] 10 Photocatalytic Degradation of Acid yellow under UV-light irradiation using Bismuth Ferrite

NanoparticlesShankramma K and Vidya Shetty K

Department of Chemical Engineering, National Institute of Technology Karnataka, Surathkal, Srinivasnagar Post, Mangalore-575025, [email protected], [email protected]

OID 11 Green Assisted Cu doped ZnO Nanoparticles by using leaf extract of Synadium grantiiSangeeta M, K.V. Kartik, H. Naga bhushana, K.S. Ananth raju, R. Ravi shankar, L. Renuka, R.B.

Basavaraj and K. Jeetendra

Department of Chemical Engineering, Dayananda Sagar College of Engineering, Bangalore-78, OID 13 Electrochemical sensing and Biological activities of ZnO nanoparticles: Synthesis via solution

combustion methodK.Manjunath, H.Rajanaik, H.Nagabhushan, J. Dupont, T.Ramakrishnappa and G. Nagaraju

Centre for Nano and Material Sciences, Jain University, Jakkasandra, Kanakapura Talluk, Karnataka, [email protected]

Subject : InterdisciplinaryTheme : Physics and chemistry of materialsTechnical Session: TS#4Date: 27th May 2016 Time: 11.45 am – 1.45 pm Venue: Room No.5

INV 40 Consequences of austenitic to martensitic phase transformation in 316 and 316LN stainless steels

J. Manjanna, Y. Kamada and S. KobayashiDept. of Chemistry, Rani Channamma University, Belagavi 591156, [email protected],

INV 41 Pretreatment of Seawater for Desalination ApplicationsSyed Murtuza Ali

Department of M&IE, Caledonian College of Engineering, P.O. Box 2322, Al-Hail, PC 111, Sultanate of Oman

OID 14 Synthesis, Characterization and Biological Evaluation of Novel Furan Based ImidazolonesDakshayini Chandrashekar Achar, Chaitramallu, M and Devaraju Kesagudu

Deapratment of Chemistry Government College for Women, Mandya and Research Scholar at Yuvaraja’s College, Mysuru – 570 005, India, [email protected]

OID 15 Curry leaves extract as an ecofriendly green inhibitor for corrosion control of aluminum in aqueous sulfuric acid medium

Pushpanjali, Suma A Rao, Padmalatha RaoDepartment of Chemistry, Manipal Institute of Technology Manipal University, Karnataka, India

[email protected] 16 Development of Quantitative Enzymatic Method and its Validation for the Assay of Peroxidase

in Seeds of Some FruitsNelligere Arkeswaraiah Chamaraja and Padmarajaiah Nagaraja

Department of Chemistry, Vidya Vikas Institute of Engineering and Technology, Mysuru, Karnataka, OID 17 Effect of conventional and microwave sintering on nanostructured Hydroxy Apatite (HAp) for

biomedical applicationRoopalakshmi, S and R. Ravishankar

Department of Chemical Engineering, Dayananda Sagar College of Engineering, Bengaluru-560078, [email protected]

OID 18 Cyclohexamide As A Green Corrosion Inhibitor For Mild Steel In Acid MediaM.R.Vinutha and T.V. Venkatesha

Department of Chemistry, School of Chemical Sciences, Jnana Sahyadri Campus, Kuvempu University, Shankaraghatta-577451, Karanataka, India [email protected]

OID 19 Stability Study Indicating Impurity Analysis of Testosterone by Rapid RP-UPLC-MST. Shobha Rani, D. Mahaboob Basha, G. Venkata Reddy, Rajasekhar Chekkara, Y. Paul Raj, M.

Reddappa and A. Anil KumarDepartment of Chemistry, Dravidian University, Kuppam, Chittoor (Dt.), [email protected]

Subject : InterdisciplinaryTheme : Materials for sustainability and environmentTechnical Session: TS#5Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Seminar Hall

INV 42 Synthesis and characterization of achiral ferroelectric oxadiazole liquid crystalsMahabaleshwara Subrao, Srinivasulu Maddasani, Subrah manyam Sripada, Venkata Chalapathi

Pallavajhula and Dakshina Murthy, PDept. of Chemistry, Manipal Institute of Technology, Manipal University, Manipal – 576 104, India

[email protected] 43 Opportunities and Challenges in Production of Biofuels and Bioenergy for Climate Change

MitigationDevanand Maski

Department of Farm Machinery and Power Engineering, College of Agricultural Engineering, Raichur, University of Agricultural Sciences – Raichur, Karnataka, [email protected]

OID 36 Lactic acid based spoilage indicator for milkMrudula Guggilla and R.S.Matche

Food Packaging Technology Department, CSIR-Central Food Technological Research Institute, Mysore – 570 020, India, [email protected] Mob: 8792538629, 9640905136

OID 37 Naphthyl Substituted Chalcones as the Precursor for the Synthesis of Aziridinyl Ketones - Spectral and Antimicrobial Studies

N. Prakash, G.Reka, C.Ramya and N. IngarsalPG and Research Department of Chemistry, Rajah Serfoji Govt. College, Thanjavur-05.

Tamilnadu, India, [email protected] 38 Oxidative changes in sesame oil during heating at frying temperature and its effect on Rats

Mujeeda Banu, Prasad N., Singsit, D3., Ashwini Reddy and Farhath Khanum and SiddaramaiahDepartment of Chemistry, Vidya Vikas Institute of Engg. and Technology, Mysuru, Karnataka, India

[email protected] 39 Production of Bioethanol from Lignocellulosic Biomass

C.T. Putta Swamy, Bipin R Sagar, Udaya Simha, S. Manjappa and C.S. Vinod KumarDepartment of Chemical Engg., BMS College of Engineering, Bangalore, India

[email protected] 40 Development of Ion Exchange Media Using Waste Ceramics and Its Application in Water

TreatmentMythri S and B. Manoj Kumar

M.Tech scholar, Department of Environmental Engineering, Sri Jayachamarajendra College of Engineering, Mysuru -570006, Karnataka, India, [email protected], [email protected]

OID 41 Synthesis of Zeolite from Fly Ash for The Removal Colour and COD from Textile Waste WaterPooja, H. M, K.S. Lokesh and Thanushree, M.S

Health Science and Water Engineering Centre, Department of Environmental Engineering,Sri Jayachamarajendra College of Engineering, Mysuru, India, [email protected]

OID 43 Crystal structure of (E)-1-(4-fluorobenzylidene)-2-(2,3-dihydro-1-isobutyl-1H-naphtho[2,1-d]imidazol-4-yl)hydrazine

M. K. Hemaa, S. Naveenb, and N. K. Lokanatha*aDepartment of Physics, University of Mysore, Manasagangotri, Mysuru- 570 006, India

bInstitution of Excellence, University of Mysore, Manasagangotri, Mysuru-6, India*Correspondence e-mail: [email protected]

Subject : InterdisciplinaryTheme : Electronic DevicesTechnical Session: TS#6Date: 27th May 2016 Time: 4.30 pm – 6.15 pm Venue: Room No.2

INV 44 Novel Microfluidic Devices and their Applications in BiologyMahaveer Kurkuri

Jain University, BangaloreINV 45 Aqueous Chemically Chargeable Photo Battery

Harish, M. N. KDept of Chemistry, Acharya Institute of Technology, Soldevanahalli, Bangalore

INV 46 Thin films for solar cellsK.Pushpalatha

Department of Chemistry, The National Institute of Engineering, Mysore, Karnataka, IndiaOID 30 Development of self-cleaning hydrophilic coatings for solar panel and outdoor applications

Omkumar, V. U and Shilpa HiremathDept. of Chemical Engg., R.V. College of Engg., Bengaluru, [email protected]

OID 31 The Effects of 10 MeV Electron Irradiation on DC Electrical Characteristics of NPN rf Power


TransistorsT.M. Pradeep, N.H.Vinayak prasanna, Arshiya A., N.Pushpa, K.G.Bhushan and A.P.Gnana PrakashDept of Studies in Physics, University of Mysore, Mysore, [email protected]

OID 32 180 MeV Gold Ion Irradiation Effects on the DC Electrical Characteristics of Silicon NPN rf Power Transistors

M. N. Bharathi, N. Pushpa, N. H. Vinayak prasanna, T. M. Pradeep and A. P. Gnana PrakashDept of Studies in Physics, University of Mysore, Mysore, [email protected]

OID 33 Recovery of Electrical Characteristics of Swift Heavy Ion Irradiated Nano-Engineered SiGe HBTs by Electrical Biasing Technique

A. P. Gnana Prakash, N. H. Vinayakprasanna, N. Pushpa, K.C. Praveen and John D. CresslerDept. of Studies in Physics, University of Mysore, Mysore, [email protected]

OID 34 Electrical Discharge Plasma for Activation of Adsorbent and Catalytic Materials for Diesel Engine Exhaust Treatment

R. Rajagopala, N. Jagadesha and A.D. SrinivasanDepartment of Electrical and Electronics Engineering, Sri Jayachamarajendra College of

Engineering, Mysuru, Karnataka, India, [email protected], [email protected] 35 Performance Analysis of RF MEMS Capacitive switch with Meander Technique

S.B.Rudraswamy and Ranjitha.RDepartment of Electronics & Communication Engg., S.J. College of Engineering, Mysuru,

Karnataka, [email protected], [email protected]


Subject : InterdisciplinaryTheme : Physics and Chemistry of materialsTechnical Session: TS# 7Date: 28th May 2016 Time: 2.00 pm – 4.00 pm Venue: Room No.2

INV 47 Antimicrobial copolymers of NVPM.K. Veeraiah

Principal, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, India, [email protected] 48 Bio Energy from Lignocellulosic Feedstocks using Ruman Flora

S. ManjappaDirector (R&D), Sahyadri College of Engg., and Management, Adyar, Mangalore – 575005, Karnataka

OID 12 Esterification of Acetic Acid with Ethanol Using Heterogeneous Acid Modified ZSM-5 zeolite Catalyst

Sabarish R and G.UnnikrishnanPolymer Science and Technology Lab, Department of Chemistry, National Institute of Technology,

Calicut, Kerala, India, [email protected] 20 A Comparison of Gamma and Electron Radiation Effects on N-Channel D-MOSFETs

Arshiya Anjum, N. H. Vinayakprasanna, T.M. Pradeep, N. Pushpa, K.G. Bhushan, J.B. M. Krishna and A.P. Gnana Prakash

Department of Studies in Physics, University of Mysore, Manasagangotri, Mysore, Karnataka, India [email protected]

OID 21 High Energy Proton Irradiation Effects on Subthreshold Characteristics of N-Channel DMOSFETS

N. Pushpa and A. P. Gnana PrakashDept of Studies in Physics, University of Mysore, Manasagangotri, Mysore, [email protected]

OID 22 Synthesis of Luminescent Transition Metal Complexes For Optoelectronic ApplicationRarima R and G. Unni krishnan

Polymer Science & Technology Lab, Department of Chemistry, NIT Calicut-673601, Kerala, [email protected], [email protected]

OID 23 Synthesis, characterization and biological activity of Nickel complexes containing m-aminophenyl benzimidazole

Roopashree, B and Gayathri VDepartment of Chemistry, JSS Academy of Technical Education, Bengaluru, [email protected]

OID 42 Stability Indicating Spectrophotometric Method for the Determination of Enrofloxacin in Pharmaceuticals

N. Rajendraprasada, D.M. Pramoda and K.BasavaiahPG Department of Chemistry, JSS College of Arts, Commerce & Science, Mysore,

[email protected]


Subject : MechanicalTheme : Characterization of materialsTechnical Session: TS# 1Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Room No. 3

INV 49 Wear, friction and mechanical properties of carbon fabric/multi-wall carbon nanotube/epoxy composites

B. Shivamurthy and S. AnandhanSchool of Engineering & IT, Department of Mechanical Eng., Manipal University, Dubai Campus.

[email protected] 50 Studies on Advanced Machining of Plant based Natural Fibre Incorporated Polypropylene

Green CompositesN. Ramesha, Siddaramaiah and Dr. Sania Akhtar

Central Institute of Plastics Engineering & Technology, Mysore, Karnataka, IndiaOME 14 Surface Roughness Evaluation in High Speed Turning of Ti-6Al-4V Using Vibration Signals

Anil Prashanth Rodrigues, Grynal D’ Mello and P. Srinivasa PaiDepartment of Mechanical Engineering, NMAM Institute of Technology, Nitte, Karnataka, India

[email protected], [email protected] 15 Wavelet Transform Based Evaluation of Surface Images in High Speed Turning of Ti-6Al-4V

Vishwanatha J S, Srinivasa Pai P and Grynal D’MelloDepartment of Mechanical Engineering NMAMIT, Nitte, Karnataka, India

[email protected], [email protected], [email protected] 16 Development and Microstructural Characterization of High Speed Tool Steel through

Microwave EnergyK. Sachin Yadiyal and Ajit Hebbale

Department of Mechanical Engg., NMAM Institute of Technology, Nitte - 574110, Karnataka, [email protected], [email protected]

OME 17 Comparison of Dry and wet sliding wear behaviour of Squeeze cast Aluminium AlloyBharathi.V, M.Ramachandra and S.Srinivas

Dept. of Mechanical Engg., BMS College of Engineering, Bangalore, 560 - 019, Karnataka, India OME 18 Design and Analysis of Magnetic Bearing

Adithya S.G., Prajwal Hegde S., Harshitha Hegde and Sujesh KumarDepartment of Aeronautical Engineering, Mangalore Institute of Technology and Engineering,

Badaga Mijar, Moodabidre- 574225, Karnataka, India, [email protected] 19 Optimization of MEMS based microcantilever material and structure for biosensor application

Nagaraj M. J., S.L. Pinjare and V. ShanthaDepartment of Electrical & Electronics Engineering (Centre for Nano Materials and MEMS) NMIT,

Bangalore- 560 064, India, [email protected]


Subject : MechanicalTheme : Informatics, modeling and computer simulationTechnical Session: TS#2

Date: 27th May 2016 Time: 11.45 am – 1.45 pm Venue: Room No.2

INV 51 Design and development of lightweight headgear and protective devices for aerospace applications

R. Indu Shekar, R. Ramani, S. Francis, K. Tapan, T.M. Kotresh and U.K. SinghDefence Bioengg. & Electromedical Laboratory, DRDO, CV Raman Nagar, Bengaluru, Karnataka

INV 52 Wear and Friction of Advanced CompositesR. Arvind Singh, S. Jayalakshmi and M. Gupta

Department of Aeronautical Engineering, Dept. of Mechanical Engineering, Bannari Amman Institute of Tech., Sathyamangalam 638401, Tamil Nadu, [email protected]

OME 1 Optimization by BAT algorithm on shell and tube heat exchangersTharakeshwar T.K, K.N. Seetharamu, B. Durga Prasad and Bharath Kumar

Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumkur – 572 103OME 2 Design and Finite Element Analyses of Resilient wheel with Honeycomb Structure

Murali B, and Prasanta Kumar SamalDepartment of Mechanical Engineering, The National Institute of Engineering, Mysore, India.

[email protected] & [email protected] 3 Real time data acquisition of atmospheric parameters using water propelled rocket

Indrayani, D Hemade, Kishore R, P.E. Manoj, M. Parmar Azan and G. PurushothamDepartment of Aeronautical Engineering, Mangalore Institute of Technology and Engineering,

Badaga Mijar, Moodabidre - 574225, India, [email protected] 4 Optimum Process Parameters for Inconel 718 Using Taguchi Method Analysis

V.Esra, N. Venkatavhalapathi, Karthik Pavankumar CH, and P.RaghavuluDepartment of Mechanical Engineering, Vel Tech University, Chennai, Tamil Nadu, India

[email protected] 5 LabVIEW based bearing failure prediction using data acquisition system

V.V.Kulkarni, M.M.Nadakatti and A.A.DeshpandeDept. of Mechanical Engg., Gogte Institute of Technology, Belgaum-590 008, Karnataka, India

[email protected], [email protected], [email protected] 7 Assessing the quality of Hot-Rolled Aluminum Parts Using Manufacturing Process Simulation

Hemanth Thulasi S, Y. Arun kumar and M.S. SrinathDept. of Mechanical Engg., Malnad College of Engineering, Hassan, [email protected]

Subject : MechanicalTheme : Advanced manufacturing technologyTechnical Session: TS#3Date: 27th May 2016 Time: 2.30 pm – 4.30 pm Venue: Room No.3

INV 53 Role of Laser Beam Machining in Production of Precise Mould Inserts for Economic Tool Manufacturing – A Case Study

Ramesh Babu K, Raju H P, C. Umesh and Geethanjali K KGovt. Tool Room & Training Centre, Mysuru, Karnataka, India, [email protected]

INV 54 Co-rotating Twin Screw Extruders in Automotive IndustryR.M. Sunil Dutt

STEER, 290, 4th Phase, 4th Main, Peenya Industrial Area, Bangalore, [email protected] 6 Effect of operational parameters in a converging and diverging conveyor system for an

assembly operation (simulation approach)Sharath Chandra H.S, Y. Arun Kumar and Srinath M.S

Department of Mechanical Engineering, NMAM Institute of Technology, Nitte, Karnataka, India OME 13 Laser Beam and Friction Stir Welding of AA 5083- H321 Aluminum Alloy Plates

K. Subbaiah SSN College of Engineering, Chennai-603110, T.N., India, [email protected]

OME 20 Current Trends in Advanced Thermal Barrier CoatingD. Mallinath, H.B.Niranjan and A. Sathyanarayana Swamy

Dept. of Mechanical Engg., Sambhram Institute of Technology, Bangaluru, [email protected] 21 Comparative Evaluation of Additive Manufacturing Processes

Mukund Joshi, Nagaraja Shetty, N.L.S. Bharath and Chanakya Varma S.,

Department of Mechanical Engineering, Manipal Institute of Technology, Manipal -576 104OME 22 Quality Function Deployment in the Design Phase of Pressure Die for wire Drawing Process

Harshith, N.R., and K.M. SubbaiahDepartment of Industrial & Production Engineering, NIE, Mysuru, India, [email protected]

OME 23 Preparation of hydroxyapatite and calcium phosphate powder from cuttlefish bone Kamalbabu Periasamy and G.C. Mohan Kumar

Department of Mechanical Eng., National Institute of Technology Karnataka, Surathkal, Mangalore, Karnnataka, India, [email protected], [email protected]


Subject : MechanicalTheme : Composites Technology Technical Session: TS# 4Date: 28th May 2016 Time: 2.00 pm – 4.00 pm Venue: Room No.3

INV 55 Interlaminar crack supression in epoxy hybrid compositesP.S. Shivakumar Gouda

Department of Mechanical Engg., SDMCET, Dharwad, Karnataka, India, [email protected] 56 Graphene Reinforced Composite Materials

G.B. Veeresh KumarDepartment of Mechanical Engineering, Amrita School of Engineering, Kasavanahalli, Carmelram

Post, Bangalore - 560 035, Karnnataka, India, [email protected] 57 Synthesis of Light Metal Nanocomposites: Challenges and Opportunities

S. Jayalakshmi, R. Arvind Singh, and Manoj GuptaDepartment of Mechanical Engg, Bannari Amman Institute of Technology, Sathyamangalam, T.N., India

[email protected] 8 Development and characterization of chilled LM 13 alloy reinforced with Fused Si02 metal matrix

compositesHarshith H.S and Joel Hemanth

Dept of Mech. Engg., Don Bosco Institute of Technology, Bangalore, [email protected] 9 Investigation on mechanical properties of SiC particulate and E-glass fibres reinforced Al 3102

hybrid metal matrix compositesKotresh M and Nayeem Ahmed

Dept. of Mechanical Engg KNS Institute of Technology Bengaluru, [email protected] 10 Mechanical and Sliding Wear Property Evaluation of Aluminium-Silica Composites

G.B. Malli karjuna and E. BasavarajDepartment of Mechanical Engineering, Kalpataru Institute of Technology, Tiptur, Karnataka, India

[email protected] 24 Effect ATH filler on the electro-mechanical properties of EVA based compound for high voltage

applicationPraveen K and G S Ananthapadmanabha

Department of Polymer Science and Technology, Sri Jayachamarajendra College ofEngineering, Mysore – 570 006, Karnataka, India, [email protected]


Subject : CivilTheme : Earthquake resistant designTechnical Session: TS# 1Date: 26th May 2016 Time: 4.15 pm – 6.15 pm Venue: Room No.1

INV 59 Study on the Effect of Supplementary Cementing Materials on the Durability Properties of M70 Grade High Performance Concrete with Superplasticizer



M.Vijaya Sekhar Reddy, M.C. Nataraja, N.Krishna Murthy and K.C.S. ReddyDepartment of Civil Engineering, Srikalahasteeswara Institute of Technology, Srikalahasti -

517640, Andhra Pradesh, India, [email protected], [email protected] 62 Relevance of Site Characterization in Seismic Studies

Prasad, S.K. and Vijayendra, K.VaDept. of Civil Engineering, Sri Jayachamarajendra College of Engineering, Mysore-570006

b Dept. of Civil Engineering, Bangalore Institute of Technology, Bangalore-560004OCV 1 Embodied energy assessment and comparisons for a residential building using conventional

and non-conventional building materialsD.S. Yogesh and P.D. Manish

Dept. of Civil Engg., Vivekananda Institute of Engg., & Technology, Puttur, D.K., Karnataka, IndiaOCV 2 Evaluation of Fatigue Parameters in Low Strength Concrete by Replacement of Natural Sand

H.N. Rajendra Prasad, H.G. Vivek Prasad, H.A. Naveen, V. Raghu, Sandesh, D.S, B. Suneel Naik, and R. Uday

Department of Construction Technology& Management, Sri Jayachamarajendra College of Engineering, Mysuru – 570 006, Karnataka, India, [email protected], [email protected]

OCV 3 Assessment and Evaluation of Comfort Conditions in an Existing Hospital Building – A Case Study in Mysuru

V.P.Prashanth, K. Dharshan and P.S. RaghuprasadDepartment of Construction Technology & Management, Sri Jayachamarajendra College of

Engineering, Mysuru – 570 006, Karnataka, IndiaOCV 4 Controlled Low Strength Material with Fly Ash and Cinder Aggregates - An Effective

Replacement for the Compacted BackfillM.C. Nataraja and N.R. Vadiraj Rao

The National Institute of Engineering, Mysore, [email protected], [email protected] 5 Simplified analysis of Earthquake induced landslides

Pushpa, K., S.K. Prasad and P NanjundaswamyDepartment of Civil Engineering, Sri Jayachamarajendra College of Engineering, Mysore-570006

OCV 17 Influence of Soil Stiffness on Seismic Vulnerability of Irregular BuildingsB. Mallangouda, and S.K. Prasad

Department of Civil Engineering, Sri Jayachamarajendra College of Engineering, Mysuru, IndiaOCV 18 Behavior of Windward and Leeward Columns with Aspect ratio and height of the building

M. B. Vikram, G. P. Chandradharaa Assistant Professor, Department of Civil Engineering, JSSATE, Bangalore, Karnataka, India

b Professor, Department of Civil Engineering, SJCE, Mysore, Karnataka, IndiaOCV 19 Nonlinear Behaviour of RC Infilled Frames using ATENA 2D

Raghavendra Prasad M.D , Syed Shakeeb ur Rahman and Chandradhara G. PDepartment of Civil Engineering, S.J. College of Engineering, Mysuru, Karnataka, India


Subject : CivilTheme : Energy intensive byproducts and materials for green buildingTechnical Session: TS#2Date: 27th May 2016 Time: 11.45 am – 1.45 pm Venue: Seminar Hall

INV 60 Sustainable Water Management Scheme for Rural SectorM.N. Shesha Prakash

Department of Civil Engineering, Vidya Vikas Institute of Engineering & Technology, Bannur Road, Mysuru, Karnataka, India, [email protected]

INV 63 Characterization of manufactured sand based on international codes of practices M.C. Nataraja

1Department Civil Engineering Department & 2Department of Construction Technology and Management, Sri Jayachamarajendra College of Engineering, Mysore – 570 006, India

E-mail: [email protected] 6 Collapse Mechanism of RC Structures Subjected to Fire Load


N. Suresh, S. Dilip and A. ChaitanyaDepartment of Civil Engineering, The National Institute of Engineering, Mysore 570 008, Karnataka,

[email protected], [email protected] 7 Ultimate Moment of Resistance of Steel Fibre Reinforced Self-Compacting Concrete Beams

Amrutha Varshini, K.S, Vijayanand, M and Muthu, K.UBrindavan College of Engineering, Bangalore, Karnataka, India

[email protected]; [email protected] 8 Comparison of Tensegrity roof Structure with PEB roof Structure Showing Tensegrity as a

modern construction techniquePraveen L.Puthani1, S.S. Injaganeri

Department of Civil Engineering Basveshwar Engineering College, Vidyagiri 587102, Bagalkot, Karnataka, India, [email protected], [email protected]

OCV 9 Optimum Cross Section of Box Girder Bridge using FEM ApproachVaishak S.R. and G.P. Chandradhara

Department of Civil Engineering, Sri Jayachamarajendra College of Engineering, Mysore – 570 006, Karnataka, India, [email protected]

OCV 10 Performance Evaluation of High Rise Residential Building with Different Column and Floor System – A Case Study

Nagaraj Heera and P. Nanjunda swamyDepartment of Civil Engineering, Sri Jayachamarajendra College of Engineering Mysuru – 570 006,

Karnataka, India, [email protected] 11 Feasibility study to develop park and ride system for Bangalore city

Punith B. Kotagi and Avinash Chavan Department of Civil Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore

– 575 025, Karnataka, India, [email protected], avinashdec9@ gmail.com


Subject : CivilTheme : Energy intensive byproducts and materials for green buildingTechnical Session: TS# 3Date: 28th May 2016 Time: 2.00 pm – 4.00 pm Venue: Room No.1

INV 61 Studies on Fire Resistant Geopolymer from Fly Ash with and without Ceramic AdmixtureRajamane, N. P., R. Jeyalakshmi, M. Sivasakthi and J. Baskara Sundararaj

Center for Advanced Concrete Research (CACR)Department of Chemistry & Co-Principal Investigator of CACR Projects, SRM University,

Kattankulathur- 603 203, T.N., IndiaINV 64 Relevance of Masonry infills on the Seismic Response of Reinforced Concrete Structures

Chandradhara G. P. , Syed Shakeeb Ur RahmanaProfessor, Department of Civil Engineering, S.J. college of Engineering, Mysuru, Karnataka, India

bPrincipal, S.J. college of Engineering, Mysuru, Karnataka, India.OCV 12 Characterization of Blended Manufactured Sand (M-Sand) Based on NZ Flow Cone Method

M. C. Nataraja and H.R. PriyankaDepartment of Civil Engg., Sri Jayachamarajendra College of Engineering, Mysore, Karnataka, India

[email protected] 13 Effect of Particle Size of Bottom Ash on Compressive Strength Development of Concrete

Abhishek, Sharan Kumar and B B DasDepartment of Civil Engineering, NITK, Surathkal -575 025, Mangalore, Karnataka, India

[email protected], [email protected] 14 Effect of Liquid to Solid Ratio of Alkaline Activator to Cement Based Materials on the

Efficiency of Geo-PolymerizationShivaprasad, K.N., and B B Das

Civil Engineering Department, National Institute of Technology Karnataka, Surathkal-575 025, Mangalore, Karnataka, India, [email protected]

OCV 15 Effective Utilisation of Slag Sand and GGBFS for the Production of Green and Sustainable

ConcreteM.C.Nataraja, A.R. Amrutha, G. Chaitra, H. G. Leela, A. M. Rakshith and S. D. Sneha

Dept. of Civil Engg., Sri Jayachamarajendra College of Engg., Mysore, [email protected] 16 Constructional Waste Utilization – A Review

Vivek, S, Abhijith B.SDept. of Civil Engg., JSS Academy of Technical Education, Bangalore 560060, Karnataka, India

[email protected], [email protected]

Hitendra Saundankar · Web viewRahul Kumar, Kishor Biswas, Dinesh Atul Maurya, Madhubala and Sanjay...

Documents

Transcript of Hitendra Saundankar · Web viewRahul Kumar, Kishor Biswas, Dinesh Atul Maurya, Madhubala and Sanjay...