hire • sales • service · rowels feature a 30-degree blade pitch for betterT •concrete...

15
concrete services & supplies hire sales service www.concretehireandsales.com

Transcript of hire • sales • service · rowels feature a 30-degree blade pitch for betterT •concrete...

concrete services & supplieshire • sales • service

w w w . c o n c r e t e h i r e a n d s a l e s . c o m

1 | www.concretehireandsales.com 01477 500 066 | 2

CONTENTS

concrete services & suppliesWHAT WE DO!

HIRE AND SALE OF CONCRETING EQUIPMENT

P1 What we do!

P2 Contents and Partners

P3 - 4 Ligchine ScreedSavers

P5 - 6 Wacker Neuson Powerfloats

P7 Blades, pans, & sprayers

P8 CONTOP Topping Spreader

P9 Concrete levelling machines

P10 Concrete Buggies

P11 - 12 Concrete vibrators

P13 ‘Wacker’ plates

P14 Rollers, rammers & breakers

P15 Husqvarna road and floor saws

P16 Trimble lasers

P17 Rebar cutters & benders and scabblers

P18 Rebar tiers

P19 Lighting towers

P20 Bull floats

P21 Channel floats & bump cutters

P22 Placers, rakes and tamps

P23 Hand trowels

P24 Brush finishing and texturing

P25 Imprint rollers, ‘roller-bugs’ and tool spares

P26 Sika curing compounds (Proseal) oils, dissolver & concrete testing equipment.

SERVICE & REPAIR

• Powerfloats • Largest fleet of Wacker Neuson Ride-On• powerfloats in the UK – 48” & 36” available • • • for nationwide delivery.• Pedestrian Powerfloats – 48”, 36” & 24” edging• trowel always available.

• Ligchine ScreedSavers• Ligchine boom screed for fast, efficient levelling• of your concrete. Available for hire with an operator.

• CONTOP Topping Spreader • For use with a telehandler for fast application• of toppings to your wet concrete.

• Concrete Buggies• Forget the wheelbarrow and pump•– work smarter not harder!

• Other Concreting Equipment• Single beam screeders. • Portavibe – petrol ‘strimmer’ type pokers.• Electric Wacker Neuson high frequency pokers.• ‘Belspray’ motorised concrete curing sprayers.• Manual topping spreader barrow.

• Service and Repair of all Ride-On and Walk-Behind Powerfloats

• Full parts facility for Wacker Neuson Light Equipment products

• Powerfloats • CSS operate a large hire fleet of• Wacker Neuson Powerfloats and ex-hire• machines are always available – please• enquire regarding model type and availability.

• Ligchine ScreedSaver• Used Ligchine ScreedSavers sometimes available• from trade-up’s – please enquire.

• Other Concreting Equipment• Most items we hire can typically be purchased• as “ex-hire” products – please enquire for• details and prices.

OUR PARTNERS

USED EQUIPMENT

3 | www.concretehireandsales.com 01477 500 066 | 4

SCREEDSAVER II SCREEDSAVER MAX PRO

Ligchine introduced the ScreedSaver II™ machine in 2008 as the world’s most competitively priced boom operated screed ever offered to the industry.

• Zero turn drive system - independent hydraulic frontwheel drive

• Powered by a Honda 20hp petrol engine

• The wireless remote controlled ScreedSaver II™achieves world class tolerances that only astationary boom operated screed can reliablyproduce

• Screed Head : 3.2m

• Boom Extension : 3.8m”

Newly introduced in 2017 ScreedSaver MAX Pro™ offers the best of all worlds. The MAX Pro combines the accuracy and durability of our Standard ScreedSaver MAX™.

• Unique to the MAX Pro machine are the inclusion of ourpatent pending zero turn drive system that allows boththe upper boom frame and the lower drive frame toindependently spin 360o

• Our automated concrete additive spray bar systemintegrated into the screed head

• Onboard colour touchscreen full diagnostic display

• Kubota’s newest Tier 4 DH902, 25hp Diesel Engine

• Screed Head : 3.8m

• Boom Extension : 5.5m

• World Class Screed Accuracy

concrete services & supplieshire • sales • service

SCREEDSAVER MAX SCREEDSAVER BOSS 240

Ligchine invented the “large line” sized boom screed (18.5 m2 of coverage) in 2012. You get a lot of machine at a very reasonable price!

• ScreedSaver Max™ integrates the technologies of thestandard ScreedSaver II™

• Added features of front wheel drive and rear wheel steering

• A 90o manual pivoting drive frame

• Kubota’s 35hp V1505 Diesel motor

• Like all Ligchine screeds MAX is a wireless remotecontrolled screed

• Screed Head : 3.8m

• Boom Extension : 5.5m

• World Class Screed Accuracy

Ligchine re-invented the mega sized screed machine in 2016 when it introduced the feature loaded ScreedSaver BOSS 240 machine.

• The BOSS 240 the world’s largest boom operated screed.

• New hydraulic parallel side shifting for stickup avoidance

• Inclusion of our patent pending zero turn drive system thatallows both the upper boom frame and the lower driveframe to independently spin 360o

• Our automated concrete additive spray bar systemintegrated into the screed head

• Onboard colour touchscreen full diagnostic display,

• Kubota’s newest 57hp petrol engine(optional LPG or Diesel engine options)

• On-board pressure washer and a high intensity surroundLED lighting system

• Screed Head : 4.12m

• Boom Extension : 5.5m

• World Class Screed Accuracy

Extended

Extended

Extended

Extended

5 | www.concretehireandsales.com 01477 500 066 | 6

WACKER NEUSON WALK BEHIND - CT 24 WACKER NEUSON RIDE-ON – CRT36

concrete services & supplieshire • sales • service

The best choice for finishing concrete surfaces: CRT36Ride-on trowels of the CRT36 series have a diameter of 2 x 915 mm and are characterised by a high level of productivity and operating comfort. The practical, built-in wheel set can easily be operated from the rear of the machine.

WACKER NEUSON WALK BEHIND – CT36 AND CT48

WACKER NEUSON RIDE-ON – CRT48The patent-pending gearbox brake, gyroscopic safety sensor and engine speed limiter provide triple protection for the operator. This unique system minimizes a runaway handle situation and meets worldwide safety requirements.

Available as standard with fixed handle and fine pitch control - but optional ‘quick pitch’ or folding handle available to order.

CT36

CT48

The Wacker Neuson CRT 48 trowel range feature a finishing diameter of 1220 mm. They deliver first class results with maximum productivity.”

• Dynamically balanced design for easy and comfortable operation.

• Low vibration handle reduces hand/arm vibration for reduced operator fatigue and increased production.

• Standard foldable handle makes storage convenient while the standard central lifting eye eases transport.

• Ideally suited for concrete finishing up to the edge and around obstacles.

• Honda 4hp engine – operating weight 73kgs.

• Dynamically balanced trowels (when blades are turning) offer nearly effortless operation.

• Optimum weight distribution reduces the lateral force from the trowel for reduced operator fatigue.

• Trowels feature a 30-degree blade pitch for better concrete burnishing.

• Guard ring features tubular framing for easy cleaning and maintenance.

• CT36 - Honda 5hp engine – operating weight from 80kgs (depending on handle type).

• CT48 – Honda 8hp engine – operating weight from 110kgs (depending on handle type).

• Optimum maneuverability thanks to its balanced.

• Sensitive, ergonomically designed 2-lever controls.

• Variable coupling: For constant engine torque at low and high rotor speeds.

• Good visibility thanks to front and rear lights as standard – especially on night operations.

• Integrated wheel set for easy blade change and moving on site.

• Sensitive, ergonomically designed 2-lever controls – stick steer or power steering. (power steering only on CRT48- 35L PS model)

• Optimum maneuverability thanks to its balanced power-to-weight ratio.

• Variable coupling: For constant engine torque at low and high rotor speeds.

• Good visibility thanks to front and rear lights as standard – especially in low light operations on site.

Stick steer machines available in 3 different engine options:

1. CRT48-37V Air-cooled two-cylinder four-cycle gasoline engine - Vanguard.

2. CRT48-33K Liquid-cooled three-cylinder four-cycle gasoline engine - Kubota.

3. CRT48-35L Liquid-cooled four-cylinder four-cycle diesel engine – Kohler/Lombardini.

CRT36

CT24

CRT48

7 | www.concretehireandsales.com 01477 500 066 | 8

concrete services & supplieshire • sales • service

BLADES & PANS CONTOP TOPPING SPREADER

High quality, long lasting and great value for money. Fits most common makes of powerfloat. Huge stock always available!

BELSPRAY

2 auxiliaries are required to operate the CONTOP hydraulics.

We can supply each machine in your company colours if required (at extra cost)!

24” edging walk behind

36” powerfloats

48” powerfloats

TYPE

Combination Blade

Pan

Finish Blade

Combination Blade

Pan

Finish Blades

Finish Blades

Combination Blades

Combination Blades

Pan (4 blade machine)

Pan (4 blade machine)

CODE

BL24 *

PA24

BL36F

BL36C

PA36 **

BL48F

BL48F/5

BL48C

BK48C/5

PA48W

PA48R

PACK SIZE

4 Blades

Each

4 Blades

4 Blades

Each

4 Blades

5 Blades

4 Blades

5 Blades

Each

Each* - fits all except Whiteman edging float - use BL24WH æ

** - fits all except Barikell powerfloats -use PA36BK æ

PULL-ALONG MANUAL DRY SHAKE MATERIAL SPREADER.

This pull-along manual dry shake material spreader is a great tool for applying dry shake hardeners, reflective toppings and colouring compounds. Machine weight – 48kgs empty.

• Hopper takes 100 kg of material.• Discharge range 1 to 6 kg.• Wheels drive hopper blades.• Each wheel is independent for easy turns.• Foldable handle for ease of transportation and storage.• Folding stand for ease of material loading.• Low dispensing height reduces dust.• Exact material measurement per m2 saves material cost and meets exact job specification.

Designed by Concrete Services and Supplies (CSS) and manufactured in the UK.A new versatile, mobile and affordable Dry Shake Topping Spreader that attaches directly to a Telehandler.

CSS recommend a “double boom” Telehandler with a boom reach of 12m or 14m.

• Weight : 380Kg. • Length: 2620mm.

• Width: 980mm. • Depth: 900mm.

Capacity

100KG

The Classic comes with a fourwheeled trolley chassiswhich requires thedrums to belifted on.

Quality Heavy Duty KnapsackSprayer

HAND SPRAYER

• 4-wheeled welded trolley chassis.• Albany crown gear type pump.• Honda petrol engines.• Duplex suction pipe with agitator jets and suction hoses.• 5m delivery hose.• 3m x 3/8” (10mm) lance with 3/8” (10mm) brass spray jet.• Optional extra: Additional length of hose.

Drum lift chassis and BITUMEN SPRAYERS also available.

• Built-in chemical solution agitator. • Supplied with heavy duty trigger valve with in-line filter.• 500mm reinforced spray lance with 3 interchangeable nozzles.• Internal piston pump with chemical resistant viton® seals.• Impact, corrosion and UV resistant. • Wide filler opening and integral filler scale.• High density polyethylene tank. • 1350mm high pressure hose.• Lightweight 3.4kgs (empty). • Filling scale in gallons and litres. • Supplied with measuring cup, field service kit and extra nozzle.

Powered by

9 | www.concretehireandsales.com 01477 500 066 | 10

concrete services & supplieshire • sales • service

WIZARD UNI SCREED

CONCRETE BUGGIES

A tried and tested, simple method of laying and levelling concrete.

SCREEDEMON

ROLLER STRIKER

The WS35 WIZARD UNI SCREED is a fast, efficient, economical way to accurately screed concrete floors.

• Dump and drive capability allows for feathering of load in forward and reverse.• Operator’s platform with simple and clean control system allows for comfortable and convenient operation of the unit.• Excellent traction and control with heavy-duty welded chassis.• High density poly bucket is impact resistant and designed to withstand the toughest use.• Power supplied through heavy-duty hydraulic pump and two high efficiency hydrostatic drive motors.• Foot operated dump lever allows operator to keep both hands on steering handle at all times.• Foot actuated operating and parking brake. Heavy duty components for longer life.• Foam filled tyres.

Options:• Chute for controlling flow in small areas

• Standard tube lengths up to 7.2m• Available with or without hydraulic powerpack• Square drive or round drive options on tubes

• Extra rigid, double triangular, magnesium screed bar • Minimises variability in vibration – dual damping for low vibration to the operator.• Clamps to Screedemon - no holes or hardware through bar is attached or removed from screed in seconds for cleaning/transport• Allows for offsetting of screed for working under protrusions• Screed bar lengths available – 1.2, 1.8, 2.4, 3.0, 3.6, 4.2,4.8, 5.5 & 6.1m lengths

• Fully adjustable handles to obtain maximum operator comfort.• Vibration brings fine material to the surface ready for finishing or texturing.• Durable vertical drive system with clutch for gentle power take up.• Blades interchangeable with other similar screed units.• Lightweight ‘L’ section screed bar 1.8, 2.4, 3.0, 3.6, 4.2 & 4.8m.

TRUSS SCREED

• The Truss screed is available in engine driven or pneumatic models with hand and auto winch options. • Power Winches enhance safe operation with a top mounted engagement lever for instant activation and deactivation. • Travel speed is easily adjusted through a simple valve control. • Sections come in 8’ (2.4m), 4’ (1.2m) and 2’ (0.6m) lengths and can be combined to produce screeds up to 75’ (23m)• Lightweight all aluminium construction (e.g. 7.7m petrol screed 175kgs).

Powered by

DOUBLE BEAM SCREED

• Screed Drive Unit - Honda engine.• 5.2m, 6.2m or 7.2m Aluminium Beam sets• Extending Beam Set. 3.25m to 5.2m• Optional item Solid Pull Handles (end)

Powered by

PORTAVIBE – LIGHTWEIGHT, STRIMMER TYPE POKER TRADITIONAL SHAFT DRIVE POKERS

M2500/115 – 110v electric drive unit.A5000/160 – petrol drive unit.

3m, 4m or 5m shaft length.

25mm, 35mm, 45mm and 55mmhead diameters.

HIGH FREQUENCY ELECTRONIC POKERS

EXTERNAL VIBRATORS

ARFU26/6/115 – First-class compactedconcrete is essential for the production of concrete surfaces. Thanks to its high-quality construction, Wacker Neuson’s external vibrator with integrated frequency inverter offers this precision compaction. The result: Beautifully smooth and level concrete surfaces on walls, pillars and columns.

11 | www.concretehireandsales.com 01477 500 066 | 12

concrete services & supplieshire • sales • service

Head

Shaft length

Weight

Power

45mm

1.44m

13kgs

Honda GX35 - 4 stroke engine

Powered by

IRFU

IRFU - Standard High Frequency 110v poker with integral convertor.

Standard 5.0m hose with 15m of supply cable (other hose lengths to order).

Head diameter sizes available: 30mm, 38mm, 45mm, 57mm & 65mm.

Rubber nose cap available for all headdiameters except 30mm.

IRSE-FU57 – trigger type poker for slabs and slip form. Supplied with integral convertor.

Only 57mm diameter head size available (110v).IRSE FU57

M2500/115

• Interchangeable shafts between drive units• Order your choice of head and shaft combinations

A5000/160

• Extremely versatile thanks to its integrated frequency inverter • Can be connected directly to 110v supply• Long durability thanks to its powerful electric motor with stable speeds• Fast assembly with easy to use fastening clamps SV4 & SV5

ARFU 26

WACKER NEUSON LIGHT EQUIPMENT WACKER NEUSON LIGHT EQUIPMENT

SINGLE DIRECTION VIBRATING PLATESWater tank option available on all models - ADD ‘W’ to code

VIBRATORY TRENCH ROLLER

13 | www.concretehireandsales.com 01477 500 066 | 14

concrete services & supplieshire • sales • service

VP1030A RTKXSC3

• Operating width 322mm 2 GX120• Weight 51kgs

• Drum width 560 to 820mm• Weight 1560kgs

VP1135A

RD27-120

VP1340A

VP1550A

VP2050A

• Operating width 350mm 2 GX120• Weight 63kgs

• Operating width 386mm 2 GX160• Weight 84kgs

• Operating width 386mm 2 GX160• Weight 95kgs

• Operating width 500mm 2 GX160• Weight 99kgs

DPU130R

• Operating width 1202mm KOHLER KDW• Weight 1170kgs

REVERSIBLE VIBRATING PLATES TANDEM ROLLER

DPU2540H RD18-80

• Operating width 400mm• Weight 160kgs

• Operating width 856mm• Operating weight CECE 1560kgs• Maximum operating weight 1840kgs

DPU2550H

RD45-140

DPU3050HE

DPU5545HEC

DPU6555HEC

• Operating width 500mm• Weight 166kgs

• Operating width 500mm• Weight 206kgs

• Operating width 460mm or 600mm• Maximum weight 447kgs

• Operating width 560mm or 710mm• Maximum operating weight 724kgs

DPU80R

• Operating width 670mm or 770mm KOHLER LDW• Maximum operating weight 724kgs

REMOTE CONTROL VIBRATING PLATES

TANDEM ROLLER

REMOTE CONTROL VIBRATING PLATES

Electric Start

Electric Start

Electric Start

• Operating width 1250mm• Operating weight CECE 2695kgs• Maximum operating weight 1840kgs

• Operating width 1430mm• Operating weight CECE 4345kgs• Maximum operating weight 5300kgs

TANDEM ROLLER

BH55RW

BREAKER

• 2 stroke petrol breaker• Weight (without tool) 26kgs

RAMMERSAS50E

BS50

AS50e

BS50-2

BS50-2iBS50-4AsBS60-2

BS60-2iBS60-4As

Battery rammer – 70kgs(340mm x 280mm plate).2 stroke (premixed) 59kgs150mm width foot.2 stroke injected 59kgs 150mm width foot.4 stroke Honda 64kgs 150mm width foot. 2 stroke (premixed) 66kgs 280mm width foot. 2 stroke injected 66kgs 280mm width foot.4 stroke Honda 78kgs 280mm width foot.

FLOOR SAWS

BFS1345

• Maximum blade diameter 450mm• Maximum depth of cut 170mm • Low hand arm vibration• Balanced central lifting point• Low maintenance and fast cutting speed

TRIMBLE LASERS

15 | www.concretehireandsales.com 01477 500 066 | 16

concrete services & supplies

HUSQVARNA FLOOR SAWS

FS305

• 350mm blade • 125mm deep cut • 2 Petrol engine

FS413

• 500mm blade • 189mm deep cut • 2 Petrol engine

FS400LV

• 450mm blade • 162mm deep cut • 2 Petrol engine

FS524

• 600mm blade • 241mm deep cut • Self propelled • 2 Petrol engine

HUSQVARNA ROAD SAWS

FS7000D

• 1000mm blade • 411mm deep cut • Self propelled • DEUTZ Diesel engine

HUSQVARNA ULTRA-EARLY ENTRY SOFF-CUT SAWS

SOFF-CUT 150

• 30mm deep cut • Maximum blade diameter 150mm • Robin Petrol engine

SOFF-CUT4000

• 70mm deep cut • Maximum blade diameter 350mm • Self propelled • KOHLER Petrol engine

SOFF-CUT4200

• 76mm deep cut • Maximum blade diameter 350mm • Self propelled • KOHLER Petrol engine

HL700 - DIGITAL READOUT RECEIVER

• Digital Readout of elevation provides a numeric display of ± 5 cm and shows exactly how far the elevation is from on-grade • A large 12.7 cm reception height, more than double the industry standard, allows quick acquisition of the laser beam • Multiple on-grade sensitivities to customize accuracy needs to application • It is ‘TOUGH’ - totally waterproof and can withstand a drop of 3 meters onto concrete •Simultaneous elevation LEDs signal in low light levels • C70 Adapter with Bubble Vial included

LR30 - RECEIVER USED ON OUR LIGCHINE BOOM SCREEDS

• Three selectable accuracy settings allowing the user to rough grade through to final finish • Full 360 degree reception - picking up the laser beam wherever you are working • Choice of batteries and mounting kit packages • Robust and built for tough jobsites

FS5000D

• 750mm blade • 300mm deep cut • Self propelled • Diesel engine • Optional 900mm conversion

SOFF-CUT2000

• 38mm deep cut • Maximum blade diameter 250mm • Self propelled • Robin Petrol engine

‘GREEN’ CONCRETEOR HARD CONCRETE OPTIONS

A COMPLETERANGE OFREPLACEMENTBLADESAVAILABLEFOR ALL OFOUR SAWS!

i

AL28M - AUTOMATIC OPTICAL LEVEL

• A Metal housing, rugged and reliable enough for the toughest site conditions • Good optical quality, bright clear view through the telescope, easy to read in low light • Magnetic damped compensator, stable and rugged, remains accurate even under vibration • Bubble mirror easy to see, set up the level at comfortable eye level, the operator can still see

and level the bubble

GL422N - DUAL GRADE LASER WITH VERTICAL ALIGNMENT

• Simple, accurate dial in grade from -10% to +15% • Up to 2,600 ft (800 m) working diameter • Fast setup, minimal training time and automatic self levelling • Highly rugged design and patented lighthouse seal protects the rotor head and glass • Superior drop and weather protection • 2-way full function remote control • Automatic Grade Match and PlaneLok

GL722 - HIGH PRECISION AND EXTRA LONG RANGE, DUAL GRADE LASER • Accurate results regardless of temperature changes • Long battery life and flexible power options • Better than 5 arc second servo deadband accuracy for demanding high accuracy requirements • Up to a to 3,000 foot (900 meter) diameter • +/- 10% in the X axis grade range and -0.5 to +25% Y-axis grade range • Long-range Radio Remote • Automatic AxisAlignment, Grade Match and PlaneLok capability

LS Laser Staff: • 200mm2 base • 1.8m high

TRIPODS,STAFFS ANDOTHER TRIMBLEPRODUCTSALSO AVAILABLE- PLEASE CONTACT US WITH YOURREQUIREMENTS

17 | www.concretehireandsales.com 01477 500 066 | 18

concrete services & supplies

WACKER NEUSON REBAR TIERS

MAX REBAR TIERS

RB441T/CE TWINTIER• 20mm to 44mm combination.• 240 ties per coil (twin wire, 1 wrap - stronger and tighter).*• 4,000 ties per charge.• Faster tying speed.• Variable torque dial.• Less wire consumption.• TW1061T series tying wire - 1.0mm diameter wire - available in plain steel, electro galvanised & polyester coated.• 30 spools per carton.

REBAR CUTTERS & BENDERS

RCP16/115Rebar cutter up to16mm hightensile steel.

RCP20/115 Rebar cutter up to 20mmhigh tensile steel.(optional bending head).

RCP25/115 Rebar cutter up to 25mmhigh tensile steel(optional bending head).

RCP32/115 Rebar cutter up to 32mmhigh tensile steel.

REBAR

CUTTING

REBAR

BENDING

DF16• The mechanical device uses a proven twin wire mechanism • Ties up to 1,000 uniform and firmly tied knots per hour. • No bending down because the DF 16 is easily operated with just one hand and in an upright position. • A professional tool for traditional rebar jobs as well as for fastening plastic ducts. • Mechanical device concept: Independent of battery life and recharging times.• No scrap wire to dispose of.• The magazine of 77 single ties is changed easily.• 7,700 ties per carton.• Optional carry case available.

RB398/CE• 20mm to 39mm rebar combination.• 120 ties per coil (3 wraps per tie).*• 2600 ties per charge.• TW898 series wire - 0.8mm diameter wire - available in plain steel, electro galvanised & polyester coated. • 50 spools per carton.

* - number of ties based on 13mm on 13mm rebar.

i

SCABBLERS

VL Low vibe pole scabbler

HD Triple head scabbler

VL Single head scabbler

150.5320

153.5200

196.5100

19 | www.concretehireandsales.com 01477 500 066 | 20

concrete services & supplieshire • sales • service

BIG BLUE FLOATS

Also known as a ‘Big D’, Easy Float, or even ‘flip flop float’. Made from flexible blue steel and 12” (300mm) wide. Excellent smoothing float.

Blade Only

Blade with knucklehead

Blade with knucklehead

and 3 x 1.8m handles

4’ (1.2m)

CC750-01

CC750-KH

CC750-KH3P

5’ (1.5m)

CC749-01

CC749-KH

CC749-KH3P

6’ (1.8m)

CC751-01

CC751-KH

CC751-KH3P

MAGNESIUM BULL FLOATS

Also known as ‘mag floats’. Made from extruded,painted magnesium and are 8” (200mm) wide. Being rigid they can help even out the wetconcrete. Better than a Big Blue if your concretesuffers from ‘bleed water’issues – and a good smoothing float.

Blade Only

Blade with knucklehead

Blade with knucklehead and 3 x 1.8m

handles

4’ (1.2m)

CC803-01

CC803-KH

CC803-KH3P

WHISKY STICK

Magnesium blade levels and places concrete fast.Rounded back edge for floating and square front edge for cutting and filling (a mini ‘bump cutter’). Blade is 5’ (1.5m) long. Handle tilts to the right floating angle.Fitted with braces and a 1.8m x 35mm diameter snap handle.

Whisky stick complete with handle 5’ (1.5m) CC425

i

LIGHT TOWERS

4.5KVA SUPER SILENT DIESEL GENERATOR LIGHTING TOWER • 4 x 200w fully adjustable LED lamps (100,000 lumens).• 5.4m mast height.• 66 dba @ 7m.• Yanmar diesel engine.• 4 wheeled trolley.• Adjustable outrigger legs.• 395kgs fully fuelled.• Optional 7 day programmer/timer.• 110v & 240v outlets.

WACKER NEUSON LIGHT TOWERS

LIGHT BALLOON • Metal halide 1000w.• 110v supply.• Illuminates 315m2.• Tripod height extends from 2.3m to 5.0m.

LB110M

RUBBER SQUEEGEE

Rubber Squeegee complete with snap adaptor CC284.SQ4 (1.2m) SQ6 (1.8m)

21 | www.concretehireandsales.com 01477 500 066 | 22

concrete services & supplieshire • sales • service

CHANNEL RADIUS FLOAT

Made from magnesium (which reduces bleed water issues), these ‘dual edge’ floats will improveyour flatness tolerances. The round edge on the back of the float will smooth the concrete and the sharp right angle on the front will help trim the ‘high spots’. Supplied with braces(outriggers) to reduce twisting.

* - no braces with CC046SR – 6’ (1.8m)

HEAVY DUTY BUMP CUTTER

Traditional bump cutter also known as a paversor highway straightedge Improves tolerances of your floor slab in the later stages of concretingby trimming high spots and moving the ‘fat’ to help fill and level uneven areas.

LIGHTWEIGHT BUMP CUTTER

Often known as a ‘keyhole’ bump cutter. Made from magnesium the keyhole design gives greaterstrength but very light. Improves tolerances of your floor slab in the early stages of concreting whilst the concrete is still ‘plastic’.

Blade only complete with braces

Blade with braces & knucklehead

Blade with braces, knucklehead

and 3 x 1.8m poles

6’ (1.8m)*

CC046SR-01

CC046SR-KH

CC046SR-KH3P

10’ (3.0m)

CC050SR-01

CC050SR-KH

CC050SR-KH3P

Blade only complete with braces

Blade with braces & knucklehead

Blade with braces, knucklehead and

3 x 1.8m poles

10’ (3.0m)

CC721-01

CC721-KH

CC721-KH3P

12’ (3.65m)

CC722-01

CC722-KH

CC722-KH3P

Blade only complete with braces

Blade with braces & knucklehead

Blade with braces, knucklehead and

3 x 1.8m poles

10’ (3.0m)

CC714-01

CC714-KH

CC714-KH3P

12’ (3.65m)

CC716-01

CC716-KH

CC716-KH3P

i

i

i

RAKES & PLACERS

Gold light weight all aluminium placer (no teeth)

Blue light weight all aluminium placer (no teeth)

Dual faced magnesium rake - lightweight broom handle - 1 straight side and 1 with teeth

Mega mover contoured wood handle with aluminium head (with teeth)

Mega mover contoured wood handle with aluminium head (no teeth)

CC944

CC964

CC113

CC977

CC979

STRAIGHT EDGES

Buckaroo (magnesium 35mm x 50mm) with wood handle and level vial – 1 round edge for smoothing and 1 square edge for trimming.

Buckaroo

6’ (1.8m)

CC422L

8’ ( 2.4m)

CC428L

10’ (3.0m)

CC423L

4’ (1.2m)

CC421L

Buckeye (aluminium 40mm x40mm) with wood handle and level vial – square edge.

Buckeye

6’ (1.8m)

CC893

8’ ( 2.4m)

CC894

10’ (3.0m)

CC895

4’ (1.2m)

CC891

i

i

i

8’ (2.4m)

CC048SR-01

CC048SR-KH

CC048SR-KH3P

SWORD TROWEL (BIG BEN)

A finishers trowel with a pointed end for those awkward corners.Also known as a ‘Big Ben’ trowel.

Sword Trowel (Big Ben)

HC121

HC123

360mm x 115mm

450mm x 115mm

Concrete is heavy enough to move around so use a good quality lightweight tool. All alumin-ium is our most popular placer. Gold – slightly ‘hooked’ or Blue – 60 degree angle.

HAND TAMPS

Aluminium box section tamps cut to length up to 6.0m long.Tamp handle set (pair) TH

23 | www.concretehireandsales.com 01477 500 066 | 24

concrete services & supplieshire • sales • service

MAGNESIUM HAND TROWEL

Round ended or square ended. Ideal for wet trowelling to help reduce bleed water to the surface

Square ended 16” x 3 ¼” (400mm x 75mm)

Square ended 20” x 3 ¼” (500mm x 75mm)

Round ended 16” x 3 ¼” (400mm x 75mm)

CF016PF

CF020PF

CF076PF

HAND EDGERS - ARRIS TROWELS

An edging trowel to give a clean, crisp border to your external slab.

9” x 4” x 1/4” radius (225mm x 100mm x 12mm radius)

9” x 4” x 1/2” radius (225mm x 100mm x 6mm radius)

6” x 4” x 5/8” radius (150mm x 100mm x 16mm radius)

6” x 4” x 3/4” radius (150mm x 100mm x 19mm radius)

6” x 4” x 1” radius (150mm x 100mm x 25mm radius

6” x 3” x 1/4” radius (150mm x 75mm x 6mm radius)

CF677PF

CSS677PF

CF562PF

CF571PF

CF675PF

CF568PF

URETHANE HAND FLOAT

Hard wearing urethane 350mm x 150mm

Urethane hand float 14” x 5” 671013

FRESNO BROOM

HAND FINISHING BROOMS

Brush finishing made easy. The narrow blade will smooth the surface as you push the float out and as you rotate the knucklehead and alter the pitch so the brush touches the surface and textures the wet concrete as it is pulled back towards you. Available in soft, medium, hard polybristle and wire textures.

STEEL HAND TROWELS

Good quality trowels from Kraft Tool,Marshalltown and other leading manufacturers.

These are our most popular trowels – please contact us for other sizes.

Kraft carbon steel finishing trowel 18”x 5” proform grip (round front square back)

Kraft carbon steel finishing trowel 14” x 4” proform grip (square both ends)

Kraft carbon steel finishing trowel 14” x 5” proform grip (square both ends)

Kraft carbon steel finishing trowel 14” x 4” proform grip (round front square back)

Kraft carbon steel finishing trowel 14” x 4” proform grip (round both ends)

CF343PF

CF217PF

CF534PF

CF284PF

CF446PF

4’ Fresno (no handles)

4’ Fresno with 3 x 1.8m handles

4’ Broom head c/w brackets

4’ Fresno blade only

Float adaptor

SOFT

CC834-KHS

CC834-KHS3P

4-SOFT

CC834-01

FLAD

MEDIUM

CC834-KHM

CC834-KHM3P

4-MED

HARD

CC834-KHH

CC834-KHH3P

4-HARD

STEEL/WIRE

CC834-KHW

CC834-KHW3P

4-STEEL

Polybristle

4’ complete with snap adaptor (45mm)

4’ complete with snap adaptor (45mm) and 1 x 1.8m handle

SOFT

4-SOFTSA

4-SOFTSAH

MEDIUM

4-MEDSA

4-MEDSAH

HARD

4-HARDSA

4-HARDSAH

Additional 1.8m handles available to make longer handle lengths (CC289SB).

Wire (steel

Complete with fixed wooden handle

Head only (no brackets or handle)

2’ (600mm)

513.200.240

N/A

3’ (900mm)

513.200.360

510.200.360

4’ (1200mm)

513.200.480

510.200.360

To use wire broom ‘head only’ with standard 45mm snap handles add 1 x snap adaptor (CC284),1 x bracket (CC494) and 1.8m snap handles to suit (CC289SB).

MULTITRACK FLOATS

texturing float for putting ‘V’ shaped grooves in the surface of wet concrete. 6mm wide at the top and 6mm deep to the bottom of the ‘V’.

4’ (1.2m) grooves at 1”(25mm) (centre to centre)

4’ (1.2m) grooves at 1/2”(12mm) (centre to centre)

BLADE ONLY

CC796-01

CC787-01

COMPLETE WITH KNUCKLEHEAD

CC796-KH

CC787-KH

MEGA GROOVER

Double end cattle groover bit 20mm wide x 12mm deep (each)*

42” (1070mm - square end magnesium bull float (blade only)

42” (1070mm - square end magnesium bull float with knucklehead

DGB20/12

CC801-01

CC801-KH

Individual groover bars for attaching to a magnesium bull float. As they are individual units they can be attached at whatever centres that you, oryour client, requires. Standard groove size 20mm wide x 12mm deep– attached to a square end magnesium bull float

*Other size groover bitsmade to order

25 | www.concretehireandsales.com 01477 500 066 | 26

concrete services & supplieshire • sales • service

HEXAGON IMPRINT ROLLER – THE ORIGINAL!

INDENT ROLLER

Imprints a pattern into the surface of wet concrete to provide an anti-slip surface in livestock areas.

Use powder or liquid release prior to imprinting to help minimise ‘stippling’ of the surface.

For smaller areas givinga ‘pyramid’ shape to thesurface (300mm widecomplete with handle)

ROLLER BUGS

Single roller – either for pushing aggregate down and/or a diamond patterned non-slip surface. CC956-36B

Double roller – heavier and therefore primarily for pushing aggregate down for more ‘fat’ on the surface. CC952B

TOOL SPARES

CURING COMPOUNDS

Sika curehard WW – basic silicate based curing compound. Sika proseal (original) – resin based 75% efficiency Sika Proseal Pro ( low odour) resin based 75% efficiencySika Proseal W – water based 84% efficiencySika Proseal 90 – resin based 90% efficiencyOther alternative curing compounds are available – please contact us for details.

TESTING EQUIPMENT

Slump testing – cone, (CN010), rod (CN011) base plate (CN012), funnel (CN014) & scoop (MH525).Cube moulds (4 part) – 150mm (CN101), 100mm (CN100) cube tamp bar (CN127).Curing tanks – small (15/40)- 110V (CN058) 240v (CN059) large (30/80) 110v (CN056) 240V (CN057).

MOULD OIL

General purpose mould oil – 25 litres (MO25).

AVAILABLE NOW - GTR CONCRETE DISSOLVER >>

GTR Premium Concrete Remover – 20 litres (81510025321).

Knucklehead pitch brackets

CC296 CC294

Snap handles (45mm) – 1.8m CC289SB,2.4m CC293 and 3.0m CC291 available.Spare spring clips CC289-01

PUMP HOSE SKID

Pump Hose Skid LH-54 – move your pump hose line over rebar and mesh with ease.

Clevis snap adaptor CC284

EZ Kneeler WL069

Concrete Services & Supplies LimitedBrownlow Heath Lane, Congleton, Cheshire, CW12 4TH United Kingdom

Office: +44 (0)1477 500 066Email: [email protected]

...and finally! If you need any tools and equipment related to ‘concreting’ that youcan’t find in this brochure then give us a call and we will try and source it for you!Our web site will be constantly updated so please take a look for new products

– you never know we may already have it!

www.concretehireandsales.comTHANK YOU