Hiline manual

HPARGUNAM

SPARE PART CATALOGUE

4HI TOWER PRINT UNIT

HILINE

HPARGUNAM

GUIDELINES FOR REFERRING & ORDERING THE SPARE PARTS

This catalogue is useful for ordering the Spare Parts for your Press HILINE. In order to ensure a trouble freeand quick delivery of Spare Parts, follow the hints given below for ordering the Spare Parts.

The Spare Part Catalogue is sub divided into the following groups,

01-00 IR/YR Print Unit03-00 2nd Fold Folder05-00 Parallel Fold Folder06-00 Motor Drive Assembly07-00 Folder Superstructure08-00 Other Unit13-00 Tucker IIIrd Fold17-00 Balloon Former20.00 4HI Tower Print Unit21.00 Standalone Reel Splicer

The further assemblywise sub-groups alongwith Figure/Sr.No. of the Spare Part are mentioned in the SparePart Catalogue.

EXAMPLE FOR ORDERING THE SPARE PART

The following procedure is to be adopted for ordering the Spare Part. (For example: Bearing Bush PC1 (SI)of the 4HI Print Unit). As Bearing Bush PC1 (SI) belongs to 4HI Print Unit, you have to locate the sub-groupsin 20.00 i.e. in 4HI Print Unit Group. The Bearing Bush PC1 (SI) belongs to Bearing Bush Assembly havingsub-group No.20-03. After this findout the Sr.No. of the Bearing Bush PC1 (SI) from figure. The Figure No. ofthe Bearing Bush PC1 (SI) is 09.

Now, the Spare Part Catalogue Number of the Bearing Bush PC1 (SI) is to be mentioned as below,

20 03 09 L915.32-4162.0/3

Drg. No. of the PartSr.No. of the Part

Sub-Assembly Group

Main Unit Group

ORDERING OF THE PARTS

While ordering Spare Parts, please indicate the following1. Product Number of the Machine Mentioned on A2 pages of manuals.2. The complete catalogue number and description of the Part.

HPARGUNAM

Whereever applicable refer new name instead of existing name

EXISTING NAME NEW NAME

1. Product - Hiline OR 4HI Product - HILINE2. H Print Unit IR Print Unit3. Y Print Unit YR Print Unit4. Hiline 45 Unit 4HI/2HI Tower Unit5. Dancing Roller Swinging Roller6. Ink Duct Ink Fountain7. Ink Duct Roller Ink Fountain Roller8. Autopaster OR Flying Splicer Reel Splicer (Integrated OR Standalone)9. Dripping Pan (used under Ink Duct) Ink Collecting Pan10. Scoring Roller Film Roller11. Ink Take Off Roller Ink Transfer Roller12. Tension Roller/Infeed Roller before former Roller Collecting Roller13. Folder Infeed Folder Superstructure14. PIV Drive Variator Drive15. Cutting Cylinder Knife Cylinder16. Gripper Cylinder Folding Jaw Cylinder17. Sheet Batching Copy Kicker18. Web Trolley/Reel Truck Reel Trolley19. Pneumatic Tension Shaft Tensioning Spindle20. Paper Guide Roller of dilitho printing Web Lead Roller21. Adjusting Roller Assly. (Between PU) Colour Register Assly.22. Cut-Off Control Cut-Off Register

L533.22-11493.0/2 PLATE CYLINDER ASSY.(RIGHT) 533 C/O (RIGHT)L533.22-11494.0/2 PLATE CYLINDER ASSLY.(LEFT) 533 C/O (LEFT)L546.22-11497.0/2 PLATE CYLINDER ASSLY.(RIGHT) 546 C/O (RIGHT)L546.22-11498.0/2 PLATE CYLINDER ASSLY.(LEFT) 546 C/O (LEFT)L560.22-11501.0/2 PLATE CYLINDER ASSLY.(RIGHT) 560 C/O (RIGHT)L560.22-11502.0/2 PLATE CYLINDER ASSLY.(LEFT) 560 C/O (LEFT)L578.22-11505.0/2 PLATE CYLINDER ASSLY.(RIGHT) 578 C/O (RIGHT)L578.22-11506.0/2 PLATE CYLINDER ASSLY.(LEFT) 578 C/O (LEFT)

01-01/2GROUP

REV -

HILINE

SR.NO. PART NUMBER QUANTITY DESCRIPTION

0001 L533.22-11491.1/1 PLATE CYLINDER (RIGHT) 533 C/O (RIGHT)1.00L546.22-11495.1/1 PLATE CYLINDER (RIGHT) 546 C/O (RIGHT)1.00L560.22-11499.1/1 PLATE CYLINDER (RIGHT) 560 C/O (RIGHT)1.00L578.22-11503.1/1 PLATE CYLINDER (RIGHT) 578 C/O (RIGHT)1.00

0002 L533.22-11492.1/1 PLATE CYLINDER (LEFT) 533 C/O (LEFT)1.00L546.22-11496.1/1 PLATE CYLINDER (LEFT) 546 C/O (LEFT)1.00L560.22-11500.1/1 PLATE CYLINDER (LEFT) 560 C/O (LEFT)1.00L578.22-11504.1/1 PLATE CYLINDER (LEFT) 578 C/O (LEFT)1.00

0003 L533.02-5005.1/3 MACKLING RING 533 C/O (LEFT)2.00L533.02-5005.1/3 MACKLING RING 533 C/O (RIGHT)2.00L915.31-1755.1/3 MACKLING RING 546 C/O (LEFT)2.00L915.31-1755.1/3 MACKLING RING 546 C/O (RIGHT)2.00L915.32-1756.1/3 MACKLING RING 560 C/O (LEFT)2.00L915.32-1756.1/3 MACKLING RING 560 C/O (RIGHT)2.00L915.33-1801.1/3 MACKLING RING 578 C/O (LEFT)2.00L915.33-1801.1/3 MACKLING RING 578 C/O (RIGHT)2.00

0004 NS029/017 SOC. HD. CAP SCREW M12X506.000005 NS073/028 SPRING WASHER AM 126.000006 L361.10-4438.1/4 END DISK SII2.00

1 2/

L533.22-11493.0/2 PLATE CYLINDER ASSY.(RIGHT) 533 C/O (RIGHT)L533.22-11494.0/2 PLATE CYLINDER ASSLY.(LEFT) 533 C/O (LEFT)L546.22-11497.0/2 PLATE CYLINDER ASSLY.(RIGHT) 546 C/O (RIGHT)L546.22-11498.0/2 PLATE CYLINDER ASSLY.(LEFT) 546 C/O (LEFT)L560.22-11501.0/2 PLATE CYLINDER ASSLY.(RIGHT) 560 C/O (RIGHT)L560.22-11502.0/2 PLATE CYLINDER ASSLY.(LEFT) 560 C/O (LEFT)L578.22-11505.0/2 PLATE CYLINDER ASSLY.(RIGHT) 578 C/O (RIGHT)L578.22-11506.0/2 PLATE CYLINDER ASSLY.(LEFT) 578 C/O (LEFT)

01-01/2GROUP

REV -

HILINE


0007 NS073/010 SPRING WASHER BM 162.000008 NS033/076 HEX. HEAD SCR. M16x60 -10.92.000009 NS075/105 FEATHER KEY 18X11X631.00

0011 L560.02-20019.1/4 REGISTER WEDGE I2.000012 L560.02-20020.1/4 REGISTER WEDGE II2.00

2 2/

L533.22-5978.0/2 BLANKET CYL.ASSY.(RIGHT-LOWER) 533 C/O RIGHTL533.22-5979.0/2 BLANKET CYL.ASSY.(LEFT-UPPER) 533 C/O LEFTL546.22-3836.0/2 BLANKET CYLINDER ASSLY.(RIGHT) 546 C/O RIGHTL546.22-3837.0/2 BLANKET CYLINDER ASSLY.(LEFT) 546 C/O LEFTL560.22-7480.0/2 BLANKET CYLINDER (RIGHT-LOWER) 560 C/O RIGHTL560.22-7481.0/2 BLANKET CYLINDER(LEFT-UPPER) 560 C/O LEFTL578.22-4665.0/2 BLANKET CYLINDER(RIGHT-LOWER) 578 C/O RIGHTL578.22-4666.0/2 BLANKET CYLINDER(LEFT-UPPER) 578 C/O LEFT

01-02/1GROUP

ST.STEEL S.GAP

REV - 001 9/12/05

HILINE


0001 L533.22-5974.1/1 BLANKET CYLINDER (RIGHT-LOWER) 533 C/O RIGHT1.00L546.22-3832.1/1 BLANKET CYLINDER (RIGHT) 546 C/O RIGHT1.00L560.22-7476.1/1 BLANKET CYLINDER BLANK (RIGHT) 560 C/O RIGHT1.00L578.22-4643.1/1 BLANKET CYLINDER (RIGHT) 578 C/O RIGHT1.00

0002 L533.22-5975.1/1 BLANKET CYLINDER (LEFT-UPPER) 533 C/O LEFT1.00L546.22-3833.1/1 BLANKET CYLINDER (LEFT) 546 C/O LEFT1.00L560.22-7477.1/1 BLANKET CYLINDER BLANK (LEFT) 560 C/O LEFT1.00L578.22-4644.1/1 BLANKET CYLINDER (LEFT) 578 C/O LEFT1.00

0003 L533.02-5005.1/3 MACKLING RING 533 C/O LEFT2.00L533.02-5005.1/3 MACKLING RING 533 C/O RIGHT2.00L915.31-1755.1/3 MACKLING RING 546 C/O LEFT2.00L915.31-1755.1/3 MACKLING RING 546 C/O RIGHT2.00L915.32-1756.1/3 MACKLING RING 560 C/O LEFT2.00L915.32-1756.1/3 MACKLING RING 560 C/O RIGHT2.00L915.33-1801.1/3 MACKLING RING 578 C/O LEFT2.00L915.33-1801.1/3 MACKLING RING 578 C/O RIGHT2.00

0006 NS077/026 FITTING WASHER 30X40X11.000007 L361.10-4223.1/4 WORM WHEEL1.000008 NS333/065 BEARING SPACER 30X40X81.00

1 3/

L533.22-5978.0/2 BLANKET CYL.ASSY.(RIGHT-LOWER) 533 C/O RIGHTL533.22-5979.0/2 BLANKET CYL.ASSY.(LEFT-UPPER) 533 C/O LEFTL546.22-3836.0/2 BLANKET CYLINDER ASSLY.(RIGHT) 546 C/O RIGHTL546.22-3837.0/2 BLANKET CYLINDER ASSLY.(LEFT) 546 C/O LEFTL560.22-7480.0/2 BLANKET CYLINDER (RIGHT-LOWER) 560 C/O RIGHTL560.22-7481.0/2 BLANKET CYLINDER(LEFT-UPPER) 560 C/O LEFTL578.22-4665.0/2 BLANKET CYLINDER(RIGHT-LOWER) 578 C/O RIGHTL578.22-4666.0/2 BLANKET CYLINDER(LEFT-UPPER) 578 C/O LEFT

01-02/1GROUP

ST.STEEL S.GAP

REV - 001 9/12/05

HILINE


0010 L361.10-4468.1/4 RING1.000011 NS333/066 BEARING SPACER 30X40X161.000012 NS029/006 SOC. HD.CAP SCREW M8X201.00

0013 L361.10-4226.1/4 CLAMPING PIECE1.000014 L361.10-4224.1/4 WORM1.000015 L361.10-4467.1/4 RING1.000016 NS073/028 SPRING WASHER AM 126.000017 NS029/017 SOC. HD. CAP SCREW M12X506.000018 NS034/008 HEXAGONAL NUT M16X21.00

0019 NS073/010 SPRING WASHER BM 163.000020 NS046/002 SPHERICAL LUB HEAD AM8X11.000021 L533.02-14208.1/3 TENSION SHAFT (LEFT) 533 C/O LEFT1.00

L560.02-7317.1/3 TENSION SHAFT (LEFT)1.000022 L533.02-14207.1/3 TENSION SHAFT (RIGHT) 533 C/O RIGHT1.00

L560.02-7316.1/3 TENSION SHAFT (RIGHT)1.00

0023 NS368/025 PHOSP. BRONZE BUSH 18X25X222.000024 L361.10-4438.1/4 END DISK SII2.000025 NS033/076 HEX. HEAD SCR. M16x60 -10.92.00

2 3/

!

! ""

!""

""

#!$

"# "

%

#! "

&' "

L361.10-6822.0/1 BEARING BUSH ASSY.BC-1(HMT/FAG BC-1L361.10-6824.0/1 BEARING BUSH ASSY.BC-2(HMT/FAG BC-2L361.10-6825.0/1 BEARING BUSH ASSY.BC-3(HMT/FAG BC-3

01-04GROUP

REV -

HILINE


0001 L361.10-6797.0/3 BEARING BUSH ASSEMBLY BC-1 SI BC-11.000002 L361.10-6799.0/3 BEARING BUSH ASSEMBLY BC-1 SII BC-11.000003 L361.10-6813.0/3 BEARING BUSH ASSEMBLY BC-2 SI BC-21.00

0004 L361.10-6815.0/3 BEARING BUSH ASSEMBLY BC-2 SII BC-21.000005 L361.10-4175.1/4 SUPPORT BC-21.00

L361.10-4175.1/4 SUPPORT BC-31.000006 L361.10-4396.1/4 HOLDER BC-11.000007 L361.10-4398.1/4 LOCATING PIECE BC-11.000008 L361.10-4397.1/4 HOLDER BC-11.00

0009 L560.01-1014.1/4 BEARING COVER BC-11.000010 L361.10-4167.1/4 OIL THROWER RING2.000012 L361.10-4168.1/4 RING BC-12.000013 L361.10-4643.1/3 FLANGE BUSH BC-11.000014 L361.10-4642.1/3 FLANGE BUSH BC-21.00

L361.10-4642.1/3 FLANGE BUSH BC-31.00

0015 L361.10-4535.1/4 RING BC-22.00L361.10-4535.1/4 RING BC-32.00

0016 L361.10-4641.1/3 FLANGE COVER BC-21.00L361.10-4641.1/3 FLANGE COVER BC-31.00

0018 L361.10-6817.0/3 BEARING BUSH ASSEMBLY BC-3 SI BC-31.000019 L361.10-6819.0/3 BEARING BUSH ASSEMBLY BC-3 SII BC-31.00

0021 L361.10-4278.1/3 HINGE PIECE BC-22.000022 L361.10-4279.1/3 HINGE PIECE BC-31.00

1 2/

L361.10-6822.0/1 BEARING BUSH ASSY.BC-1(HMT/FAG BC-1L361.10-6824.0/1 BEARING BUSH ASSY.BC-2(HMT/FAG BC-2L361.10-6825.0/1 BEARING BUSH ASSY.BC-3(HMT/FAG BC-3

01-04GROUP

REV -

HILINE


0023 NS048/002 WASHER 12.2X15.4X1.51.000024 NS147/006 SEALING BOLT M12X1.5X201.000025 L361.10-4280.1/3 HINGE PIECE BC-31.00

0026 L361.10-4557.1/4 PIN BC-22.00L361.10-4557.1/4 PIN BC-34.00

0028 NS077/051 FITTING WASHER 17X24X1 BC-24.00NS077/051 FITTING WASHER 17X24X1 BC-34.00

0030 L361.10-4282.1/4 PIN BC-22.00L361.10-4282.1/4 PIN BC-32.00

0031 NS134/001 SOC.SET SCR.(CUP PT) M8X10 BC-22.00NS134/001 SOC.SET SCR.(CUP PT) M8X10 BC-32.00

0033 NS033/034 HEX. HEAD SCR. M8X35 -10.9 BC-24.00NS033/034 HEX. HEAD SCR. M8X35 -10.9 BC-34.00

0034 NS029/031 SOC. HD. CAP SCREW M8X168.000039 NS033/018 HEX. HEAD SCR. M10x35 -10.9 BC-14.00

0040 L361.10-4137.0/4 TAPER ROLLER BEARING ASSEMBLY2.000041 NS029/015 SOC. HD. CAP SCREW M12X35 BC-24.00

NS029/015 SOC. HD. CAP SCREW M12X35 BC-34.00

2 2/

!

%

! ""

!""

""

#! "

"#$

#

#

!

&'

! ""

!""

""

(

"# "

&'

%

#! "

#)""

%

#! "

!

&'

#!"

&' "

"# "

&'

%

! ""

!""

""

!

! ""

!""

""

#!$

"# "

%

#! "

&' "

%

#! "

!

#!"

&' "

"# "

%

! ""

!""

""

%% %

%% %

%% %

%% %

%% %

%% %

%

#

" "

(!

&

(

#)(

#)(%

#)(

#)(%

%

%

#) %

#)&' %

&' %

%% %

%% %

%% %

%% %

%% %

%% %

%

%

%

%

%

%

%

""

%%

%

"# "

"# "

&'"

%!""

!

#!$

#!"

!

#!"

##"

#)(&'

%% %

%% %

%% %

%% %

%% %

%% %

#)(&'

## *+

((

( (

#

"&,

% -

%%

%

#&"'%.

L560.02-8780.0/2 LATERAL REGISTRATION ASSLY.

L560.02-8781.0/2 LATERAL REGISTRATION ASSLY

20-10GROUP

REV - 003 2/13/2008

HILINE


0001 L560.02-5147.1/4 SPINDLE1.00

0002 NS321/002 ANG CON D.R.BRG 3206 BTVH-ZZ1.00

0003 NS333/064 BEARING SPACER 30X40X51.00

0004 NS087/003 CHECK NUT M30X1.52.00


0006 NS029/006 SOC. HD.CAP SCREW M8X2013.00

0007 NS075/028 FEATHER KEY A 8X7X201.00

0008 L560.02-5155.1/3 SPUR GEAR1.00

0009 NS135/017 SOC.SET SCR.(CONE PT) M6X121.00

0011 L560.02-8764.1/3 REGISTER PLATE1.00

NS333/056 BEARING SPACER 28X40X32.00

0012 L560.02-5146.1/4 BUSH1.00

0013 NS029/027 SOC. HD. CAP SCREW M6X304.00

0014 L560.02-5156.1/4 BUSH1.00

0015 L560.02-6159.1/4 CAP1.00

0016 NS073/007 SPRING WASHER BM 81.00

0017 NS033/012 HEX. HEAD SCR. M8X20 -10.92.00

0018 NS033/049 HEX. HEAD SCR. M5X16 -10.92.00

0019 L560.01-6116.1/3 PLANETARY GEAR BOX (160121/01)1.00


0024 NS029/002 SOC. HD CAP SCREW M6x206.00

0025 NS275/048 FLAT WASHER 8.4X36X51.00


1 2/

L560.02-8780.0/2 LATERAL REGISTRATION ASSLY.

L560.02-8781.0/2 LATERAL REGISTRATION ASSLY

20-10GROUP

REV - 003 2/13/2008

HILINE


0028 NE035/350 SRIJAN, AC SYNC. MOTOR,SYN11011.00


0031 L560.01-6880.1/4 HAND WHEEL1.00


0033 L560.02-5963.1/4 PLATE1.00

0036 L560.02-8771.1/3 SPUR GEAR1.00

0037 NS019/005 CIRCLIP FOR SHAFT 161.00

0039 Z660.47-2.30:4 NUT1.00

0040 L560.02-4139.1/4 BOLT4.00

0041 L560.02-8765.1/3 REGISTER PLATE1.00

0042 L560.01-2108.1/3 FLANGE BUSH1.00

0044 L560.02-11085.1/4 SPACER1.00

0045 L560.02-9421.1/3 SPUR GEAR1.00

0046 L100-10093.1/4 ANGLE1.00

0047 L100-10076.1/4 HOLDER1.00

0048 NS008/001 CHAMFERED WASHER 4.3X9X12.00

0049 NS033/140 HEXAGON HEADED SCREW M4X62.00

2 2/

L560.02-13022.0/2 CIRCUMFERENCIAL REGI.ASLY.(PC2 BOTTOM LEFT

L560.02-4201.0/2 CIRCUMFERENTIAL REGIST.ASSLY. BOTTOM RIGHT

L560.02-5189.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER RIGHT

L560.02-5190.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER LEFT

20-11/1GROUP

REV - 011 2/20/2008

HILINE


0001 L100-3521.1/3 BEARING BUSH1.00

0002 NS800.347.001 D.ROW ANG.CON.B.BRG SKF-3205A1.00

0003 L100-3534.1/4 RING1.00

0004 NS271/008 BUTTON HD CAP SCREW AM6X104.00

0005 L560.02-4145.1/3 SPINDLE1.00


0007 L560.02-4147.1/3 SPUR GEAR1.00


0012 L560.02-13024.1/3 CROSS YOKE SII1.00

L560.02-4140.1/3 CROSS YOKE SII1.00

0013 L560.02-4141.1/3 GUIDE BUSH BOTTOM RIGHT1.00

L560.02-4141.1/3 GUIDE BUSH UPPER RIGHT1.00

L560.02-4142.1/3 GUIDE BUSH BOTTOM LEFT1.00

L560.02-4142.1/3 GUIDE BUSH UPPER LEFT1.00

0015 NS029/009 SOCKET HD CAP SCREW M8X353.00

0018 NS033/012 HEX. HEAD SCR. M8X20 -10.93.00

0019 NS034/008 HEXAGONAL NUT M16X21.00

0020 NS008/007 CHAMFERED WASHER 17x30x31.00

0021 L560.02-4146.1/3 SPUR GEAR1.00

0024 L560.02-4149.1/4 STAY BOLT2.00

0025 NS073/027 SPRING WASHER AM 103.00


1 3/





20-11/1GROUP

REV - 011 2/20/2008

HILINE



0028 NS059/011 SINGLE ROW BALL BRG 60042.00

0029 NS020/018 CIRCLIP FOR BORE 423.00

0030 L560.02-5186.1/4 BUSH1.00

0031 L560.02-5185.1/4 PIN1.00




0040 L560.02-4987.1/4 BRACKET1.00


0042 L560.02-5187.1/3 WORM1.00

0044 L560.02-5180.0/4 UNIVERSAL JOINT2.00

0045 L560.02-14708.1/4 SHAFT1.00

L560.02-5181.1/4 SHAFT BOTTOM RIGHT1.00

L560.02-5182.1/4 SHAFT UPPER RIGHT1.00

L560.02-5184.1/4 SHAFT UPPER LEFT1.00

0047 L560.02-4986.1/4 BUSH1.00


0050 NS059/065 SINGLE ROW BALL BRG 6004 ZZ2.00

0051 L560.02-5166.1/4 SHAFT1.00

0052 L560.02-4988.1/4 WORM1.00

0053 NS001/008 TAPER PIN 4X401.00

2 3/





20-11/1GROUP

REV - 011 2/20/2008

HILINE


0055 L351.69-0016.1/4 STAY BOLT4.00

0057 NE035/350 SRIJAN, AC SYNC. MOTOR,SYN11011.00

0058 L560.02-4989.1/4 WORM WHEEL1.00

0059 L560.02-5165.1/4 PLATE1.00

0060 Z660.47-2.30:4 NUT1.00


0065 NS082/046 OIL SEAL A 20x35x71.00

0068 NS134/017 SOC.SET SCR.(CUP PT) M5X122.00

0069 NS001/035 TAPER PIN 4X161.00


0071 L560.02-4135.1/3 WORM WHEEL1.00

0072 NS276A/019 SPRING DOWEL PIN 5X284.00

0073 L560.01-6880.1/4 HAND WHEEL1.00

0074 L100-9898.1/4 STUD BOTTOM LEFT2.00

0075 L560.02-6878.0/4 FLEXIBLE CLAW COUPLING1.00

0076 L100-10076.1/4 HOLDER1.00

0077 L100-10078.1/4 ANGLE1.00


0079 NS008/003 CHAMFERED WASHER 6.4x12x1.52.00


0081 NS033/140 HEXAGON HEADED SCREW M4X62.00

3 3/

L361.10-4836.0/9 BLANKET CYLINDER GEAR BC-1 IR/YR 546 BC1L361.10-4837.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 546 BC2,3L361.10-5261.0/9 BLANKET CYL.GEAR ASSLY.BC-1 IR/YR 560 BC1L361.10-5262.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 560 BC2,3L533.02-5049.0/0 BLANKET CYLINDER GEAR BC-1 IR/YR 533 BC1L533.02-5050.0/0 BLANKET CYLINDER GEAR BC-2/BC3 IR/YR 533 BC2,3L546.02-8051.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 546 BC1L560.02-8049.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 560 BC1L578.02-8619.0/3 BLANKET CYL.GEAR ASSY (BC1) 4HI 578 BC1 BOTL578.02-8642.0/3 BLANKET CYL.GEAR ASSY.BC1 578 4HI 578 BC1 UPPL915.33-1828.0/3 BLANKET CYL.GEAR ASSEMBLY BC-1 IR/YR 578 BC1L915.33-1829.0/3 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 578 BC2,3

01-65GROUP

REV -

HILINE


0001 L361.10-4201.1/3 CLAMPING BOSS1.000002 L361.10-4374.1/4 RING1.000003 L361.10-4831.1/3 HELICAL GEAR IR/YR 546 BC11.00

L361.10-5265.1/3 HELICAL GEAR IR/YR 560 BC11.00L533.02-5018.1/2 HELICAL GEAR IR/YR 533 BC11.00L546.02-8044.1/3 HELICAL GEAR 4HI 546 BC11.00L560.02-8043.1/3 HELICAL GEAR 4HI 560 BC11.00L578.02-8620.1/3 HELICAL GEAR BC1 4HI 578 BC1 UPP1.00L915.33-1813.1/2 HELICAL GEAR 4HI 578 BC1 BOT1.00L915.33-1813.1/2 HELICAL GEAR IR/YR 578 BC11.00

0004 NS029/015 SOC. HD. CAP SCREW M12X356.000005 NS029/016 SOC. HD. CAP SCREW M12X404.000006 NS029/021 SOC. HD. CAP SCREW M16x502.000007 NS073/009 SPRING WASHER BM 124.00

NS073/028 SPRING WASHER AM 1210.00

1 2/

L361.10-4836.0/9 BLANKET CYLINDER GEAR BC-1 IR/YR 546 BC1L361.10-4837.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 546 BC2,3L361.10-5261.0/9 BLANKET CYL.GEAR ASSLY.BC-1 IR/YR 560 BC1L361.10-5262.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 560 BC2,3L533.02-5049.0/0 BLANKET CYLINDER GEAR BC-1 IR/YR 533 BC1L533.02-5050.0/0 BLANKET CYLINDER GEAR BC-2/BC3 IR/YR 533 BC2,3L546.02-8051.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 546 BC1L560.02-8049.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 560 BC1L578.02-8619.0/3 BLANKET CYL.GEAR ASSY (BC1) 4HI 578 BC1 BOTL578.02-8642.0/3 BLANKET CYL.GEAR ASSY.BC1 578 4HI 578 BC1 UPPL915.33-1828.0/3 BLANKET CYL.GEAR ASSEMBLY BC-1 IR/YR 578 BC1L915.33-1829.0/3 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 578 BC2,3

01-65GROUP

REV -

HILINE


0008 NS073/029 SPRING WASHER AM 162.000009 L361.10-4832.1/3 HELICAL GEAR IR/YR 546 BC2,31.00

L361.10-5266.1/3 HELICAL GEAR IR/YR 560 BC2,31.00L533.02-5019.1/2 HELICAL GEAR IR/YR 533 BC2,31.00L915.33-1814.1/2 HELICAL GEAR IR/YR 578 BC2,31.00

0010 L361.10-5831.1/4 RING1.000011 NS033/041 HEX. HEAD SCR. M12X50 -10.94.00

2 2/

L533.02-5051.0/0 PLATE CYLINDER GEAR PC-1 FOR 533 PC-1L533.02-5052.0/0 PIATE CYLINDER GEAR PC-2/PC-3 FOR 533 PC-2,3L915.31-1307.0/9 PLATE CYL.GEAR ASSLY.PC-1 FOR 546 PC-1L915.31-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 546 PC-2,3L915.32-1307.0/9 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 560 PC-1L915.32-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 560 PC-2,3L915.33-1825.0/3 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 578 PC-1L915.33-1826.0/3 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 578 PC-2,3

01-66GROUP

REV -

HILINE


0012 L361.10-4404.1/4 RING1.000013 L361.10-4833.1/3 SPUR GEAR FOR 546 PC-11.00

L361.10-4833.1/3 SPUR GEAR FOR 546 PC-2,31.00L361.10-5267.1/3 SPUR GEAR FOR 560 PC-11.00L361.10-5267.1/3 SPUR GEAR FOR 560 PC-2,31.00L533.02-5020.1/2 SPUR GEAR FOR 533 PC-11.00L533.02-5020.1/2 SPUR GEAR FOR 533 PC-2,31.00L915.33-1812.1/3 SPUR GEAR FOR 578 PC-11.00L915.33-1812.1/3 SPUR GEAR FOR 578 PC-2,31.00

0014 L361.10-4389.1/4 SLIDING PIN3.00L361.10-4389.1/4 SLIDING PIN3.00*

0015 L361.10-4915.1/3 WHEEL BODY ASSEMBLY1.00L361.10-4915.1/3 WHEEL BODY ASSEMBLY1.00*

0016 L915.32-1247.1/3 BUSH1.00L915.32-1247.1/3 BUSH1.00*

0017 NS029/026 SOC. HD. CAP SCREW M6X163.00NS029/026 SOC. HD. CAP SCREW M6X163.00*

0018 L361.10-4751.1/4 HELICAL GEAR FOR 560 PC-11.00L361.10-4752.1/4 HELICAL GEAR FOR 560 PC-2,31.00

1 2/

L533.02-5051.0/0 PLATE CYLINDER GEAR PC-1 FOR 533 PC-1L533.02-5052.0/0 PIATE CYLINDER GEAR PC-2/PC-3 FOR 533 PC-2,3L915.31-1307.0/9 PLATE CYL.GEAR ASSLY.PC-1 FOR 546 PC-1L915.31-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 546 PC-2,3L915.32-1307.0/9 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 560 PC-1L915.32-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 560 PC-2,3L915.33-1825.0/3 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 578 PC-1L915.33-1826.0/3 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 578 PC-2,3

01-66GROUP

REV -

HILINE


0018 L361.10-4829.1/4 HELICAL GEAR FOR 546 PC-11.00L361.10-4830.1/4 HELICAL GEAR FOR 546 PC-2,31.00L533.02-5014.1/3 HELICAL GEAR FOR 533 PC-2,31.00*

L533.02-5016.1/3 HELICAL GEAR FOR 533 PC-11.00*L915.33-1815.1/3 HELICAL GEAR FOR 578 PC-2,31.00L915.33-1816.1/3 HELICAL GEAR FOR 578 PC-11.00

0019 NS029/006 SOC. HD.CAP SCREW M8X206.000020 NS073/026 SPRING WASHER AM 86.00

"*" - TO BE ORDERED JOINTLY UNDER DRG.NO.= L533.02-5015.0/2 FOR 533 PC-2,3"*" - TO BE ORDERED JOINTLY UNDER DRG.NO.= L533.02-5017.0/2 FOR 533 PC-1* MARK NUMBERS ARE ORDERED WITH L915.32-1640.1/4 FOR 560 PC-1

2 2/

(##

"&(#'

%(""

&'"

%( ""

"#"

##(&'

#

%

!//

""

%%

%( ""

%(""

"'

##(&'

"#"

&'"

"

#' %

#

' %

#' %

# %-

# %-

# %-

%

%

&/' %-

&/' %

%-

%

!

""

#! "

"# "

%! ""

%

"# "

%%

%

%%

%! ""

L361.20-8433.0/3 INTERMEDIATE GEAR ASSEMBLY01-28

GROUP

REV -

HILINE


0001 L361.20-8430.1/4 INTERMEDIATE BOLT1.000002 L361.20-8476.1/4 SPUR GEAR1.000003 NS059/007 SINGLE ROW BALL BRG 60062.000004 NS333/061 BEARING SPACER 30X36X201.000005 NS275/048 FLAT WASHER 8.4X36X51.00

0006 NS033/012 HEX. HEAD SCR. M8X20 -10.91.000007 NS020/027 CIRCLIP FOR BORE 552.000008 NS019/011 CIRCLIP FOR SHAFT 301.00

1 1/

L361.20-7306.0/2 RECIPRO.ROLLER DRIVE ASSEMBLY01-29

GROUP

REV -

HILINE


0001 NS059/015 SINGLE ROW BALL BRG 60014.000002 L361.20-1960.1/4 CONNECTING ROD1.000003 L361.20-1865.1/4 STUD1.000004 L361.20-7308.1/4 PIN1.000006 NS059/099 SINGLE ROW BALL BRG 6302 C21.00

0007 L361.20-7307.1/3 ECCENTRIC SHAFT1.000008 L361.20-2857.1/3 WORM WHEEL1.000009 L361.20-3045.1/2 HOUSING1.000010 L361.21-1031.1/4 RING1.000011 NS059/011 SINGLE ROW BALL BRG 60041.000012 NS001/011 TAPER PIN 5X401.00

0013 NS059/102 SINGLE ROW BALL BRG 6305-C21.000014 NS034/007 HEXAGONAL NUT M12X1.751.000015 NS020/014 CIRCLIP FOR BORE 622.000016 NS019/006 CIRCLIP FOR SHAFT 201.000017 NS077/048 FITTING WASHER 12X18X0.22.000018 NS077/009 FITTING WASHER 12X18X0.51.00

0019 NS077/010 FITTING WASHER 12X18X15.000020 NS019/003 CIRCLIP FOR SHAFT 122.000021 NS077/053 FITTING WASHER 24X32X11.000022 NS001/072 TAPER PIN 4X301.000023 NS020/023 CIRCLIP FOR BORE 281.000024 NS020/018 CIRCLIP FOR BORE 422.00

1 2/

L361.20-7306.0/2 RECIPRO.ROLLER DRIVE ASSEMBLY01-29

GROUP

REV -

HILINE


0025 NS077/013 FITTING WASHER 15X22X12.000026 NS019/014 CIRCLIP FOR SHAFT 151.000027 NS029/027 SOC. HD. CAP SCREW M6X302.000028 NS073/025 SPRING WASHER AM 62.000029 NS275/066 FLAT WASHER 13X30X41.00

2 2/

/#%

"# "

%%

0

"

%(""

%&'

%(""

##(

%%

(

#"

#!"

!

!

""

""

(!&11'

/#%

("

"# "

" "

" "

" "

""

(&

(#! "

%

""

!

""

##

%

"

!

" "

(!&11'

("

""

"# "

" "

(

%(""

L560.02-9156.0/1 HAND DRIVE ASSEMBLY PRINT UNITL560.02-9160.0/1 HAND DRIVE ASSEMBLY HILINE TOWER

01-59/1GROUP

REV -

HILINE


0001 L560.01-3357.1/4 BEARING BUSH PRINT UNIT1.00

NS368/003 PHOSP. BRONZE BUSH 20X26X20 HILINE TOWER2.00

0002 L560.02-9157.1/3 COVER1.00


0004 L361.50-6108.1/4 SWITCH PLATE1.00


0006 NS003/007 SLT.CH.HD.SCREW M4X102.00

0007 NE006/020 LIMIT SWITCH XCKP2121G111.00


0009 L560.01-9158.1/4 DRIVING PIN1.00

0010 NS071/004 OIL RING 12X21.00

0011 L361.50-6107.1/4 COVER PLATE1.00

0012 NS017/004 KNURLED SCREW M8X161.00

0013 NS275/043 FLAT WASHER 6.4X18X1.52.00


0015 NS033/001 HEX. HEAD SCR. M6X10 -10.92.00

0016 L560.02-9159.1/4 OIL COVER1.00

0017 NS004/007 SLT.PAN HD.SCREW M6X101.00

0018 L560.02-4495.1/4 RING1.00

0019 L560.02-4493.1/4 GASKET1.00

1 1/

L560.02-7894.0/9 TIMING BELT PULLEY ASSEMBLY20-21/1GROUP

REV -

HILINE


0001 L100-4275.1/4 BLOCK1.00

0002 L560.02-9448.1/3 TIMING BELT PULLEY 14MX-30S-371.00

0003 L560.02-9449.1/4 SHAFT1.00

0004 L915.32-4022.1/3 BRACKET1.00





0009 NS033/041 HEX. HEAD SCR. M12X50 -10.91.00



0012 NS073/027 SPRING WASHER AM 106.00

0013 NS001/008 TAPER PIN 4X403.00

0014 NS326/013 TIMING BELT 2660-14M-37 GATES1.00

1 1/

L560.43-10023.0/9 MAIN MOTOR ASLY.56KW BAU.HL-45 FOR 56 KW BAU.L560.43-11587.0/9 MAIN MOTOR 56KW CROM.WITH STAND FOR 56KWL560.43-11776.0/9 MAIN MOTOR 90KW KEC/COM HL-45 FOR 90KWL560.43-12237.0/9 MOTOR 130KW CRO/KEC WITH STAND HL-45 FOR 130KWL560.43-14171.0/9 MOTOR 93KW BAU.WITH STAND HL-45 FOR 93KWL560.43-15254.0/9 MOTOR 130KW BAUM.WITH STAND HL-45 FOR 130KW BAUM.

20-23GROUP

REV - 005 22/04/2007

HILINE


0001 NE007.036.012 MAIN MOTOR 56KW FOR 56KW1.00NE007.036.086 GNA 160 SN-47BP BAU.56KW MOTOR FOR 56 KW BAU.1.00NE007.036.091 GNA 160 LN-471R BAU.93KW MOTOR FOR 93KW1.00NE035/300 130KW MOTOR GNA180LN S710 BAUM FOR 130KW BAUM.1.00NE035/301 90 KW DC MOTOR FOR 90KW1.00NE035/302 CGL, 130 KW (NL-45) FOR 130KW1.00



0009 L560.01-1171.1/4 MOTOR MOUNTING BLOCK4.00L560.01-14990.1/4 MOTOR MOUNTING BLOCK4.00L560.01-14991.1/4 MOTOR MOUNTING BLOCK4.00

0010 L560.03-12511.1/4 FENNER PULLEY PROD.NO.4C0335 FOR 130KW2.00L560.03-12511.1/4 FENNER PULLEY PROD.NO.4C0335 FOR 90KW2.00L560.03-15256.1/4 DRIVEN PULLEY 130KW (005C0335) FOR 130KW BAUM.1.00L560.03-9208.1/4 MOT.PULLEY 90KW/1920(004C0280) FOR 93KW1.00L560.03-9209.1/4 MOT.PULLEY 56KW/1500(004B0315) FOR 56 KW BAU.1.00L560.03-9209.1/4 MOT.PULLEY 56KW/1500(004B0315) FOR 56KW2.00

0011 NS033/032 HEX. HEAD SCR. M8X16 -10.94.00

0012 NS033/002 HEX. HEAD SCR. M6X12 -10.910.00

0013 NS033/046 HEX. HEAD SCR. M16X100 -10.94.00

0014 L560.02-9356.0/1 MOTOR BEAM1.001 3/


20-23GROUP

REV - 005 22/04/2007

HILINE


0015 L100-2847.1/4 BLOCK4.00


0017 NS033/046 HEX. HEAD SCR. M16X100 -10.94.00NS033/076 HEX. HEAD SCR. M16x60 -10.94.00

0018 L560.02-4267.0/2 MOTOR STAND1.00

0019 L100-2846.1/4 PLATE4.00

0020 NS033/060 HEX. HEAD SCR. M10X40 -10.98.00

0021 NS034/006 HEXAGONAL NUT M10X1.508.00

0022 NS008/005 CHAMFERED WASHER 10.5x20x216.00

0023 NS033/076 HEX. HEAD SCR. M16x60 -10.94.00

0024 L100-2403.1/4 LEVELING PAD10.00

0025 L361.70-4667.1/4 LEVELING BOLT6.00R335.54-2.1:10 LEVELLING BOLT M166.00R335.54-2.1:10 LEVELLING BOLT M16 FOR 56 KW BAU.6.00


0027 L560.01-3600.1/4 FISHER BOLT (SHAKTI)6.00

0028 L560.02-4300.0/4 SUPPORT1.00

0030 L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800)10.00L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800) FOR 130KW8.00L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800) FOR 90KW8.00L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800) FOR 93KW8.00

2 3/


20-23GROUP

REV - 005 22/04/2007

HILINE


0030 NS072/028 VEE BELT SPB 2840 FENNER8.00NS072/028 VEE BELT SPB 2840 FENNER FOR 56KW8.00

0032 L560.03-9187.1/4 TAPER LOCK BUSH f65 (3535R0)1.00L560.03-9187.1/4 TAPER LOCK BUSH f65 (3535R0) FOR 130KW1.00L560.03-9189.1/4 TAPER LOCK BUSH f60 (3020P0) FOR 56 KW BAU.1.00L560.03-9201.1/4 TAPER LOCK BUSH f60 (3535R0) FOR 56KW1.00L560.03-9201.1/4 TAPER LOCK BUSH f60 (3535R0) FOR 90KW1.00L560.03-9201.1/4 TAPER LOCK BUSH f60 (3535R0) FOR 93KW1.00

0034 L560.03-9205.1/4 TAPER LOCK BUSH f50 (3535R0)1.00

0035 NE035/195 HUBNER TACHO GENERATOR1.00

0038 NS136/051 STUD A M12X1304.00




0042 L560.03-15255.1/4 MOT.PULLEY 130KW 1880(005C0265 FOR 130KW BAUM.1.00L560.03-9191.1/4 MOT.PUL.56KW/1880 BAU(004B0250 FOR 56 KW BAU.1.00L560.03-9207.1/4 MOT.PUL.90/130KW/1500(004C0355 FOR 93KW1.00

3 3/

L533.22-5955.0/1 FRICTION CYLINDER ASSEMBLY FOR 533 C/OL546.22-5957.0/1 FRICTION CYLINDER ASSEMBLY FOR 546 C/OL560.22-5959.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/OL578.22-5961.0/1 FRICTION CYLINDER ASSEMBLY FOR 578 C/O

01-09/4GROUP

REV - 001 8/29/05

HILINE


0001 L533.22-12219.0/3 FRICTION CYLINDER FOR 533 C/O1.00L546.22-12216.0/3 FRICTION CYLINDER (RIL) FOR 546 C/O1.00L560.22-12218.0/3 FRICTION CYLINDER (RIL) FOR 560 C/O1.00L578.22-12217.0/3 FRICTION CYLINDER (RIL) FOR 578 C/O1.00

0002 L915.32-1014.1/3 BEARING BUSH SI1.000003 L100-5244.1/3 BEARING BUSH SII1.000004 NS066/016 NEEDLE ROL.BRG NRB RNA 49072.000005 L361.20-7375.1/4 INNER RING2.000006 L361.21-0871.1/4 HOLDING PIECE2.00

0007 NS333/144 BEARING SPACER 36X45X161.000008 L361.20-8548.1/4 SPUR GEAR1.000010 NS059/027 SINGLE ROW BALL BRG 62061.000011 NS333/058 BEARING SPACER 28X40X251.000012 L361.20-2858.1/4 WORM1.000014 NS333/057 BEARING SPACER 28X40X101.00

0015 NS333/052 BEARING SPACER 25X36X161.000019 NS333/078 BEARING SPACER 45X54.8X32.000020 L361.20-7378.1/4 RING2.000023 NS020/027 CIRCLIP FOR BORE 553.000024 NS077/035 FITTING WASHER 45X55X12.000025 NS019/035 CIRCLIP FOR SHAFT 684.00

0028 NS021/018 SLOT.GR.SCR.-FLAT END M5X62.00

1 2/


01-09/4GROUP

REV - 001 8/29/05

HILINE


0029 NS075/069 FEATHER KEY A 10X8X251.000030 NS075/011 FEATHER KEY A 8X7X321.000033 NS029/026 SOC. HD. CAP SCREW M6X166.00

0034 L560.02-12225.1/4 END DISK1.000036 NS021/027 SLOT.GR.SCR.-FLAT END M5X121.000037 NS077/093 FITTING WASHER 69X 85X15.000038 NS033/020 HEX. HEAD SCR. M12X30 -10.91.000039 NS073/028 SPRING WASHER AM 121.000040 NS333/049 BEARING SPACER 25X36X51.00

0041 NS800.019.002 CIRCLIP 25X2H IS:3075 PART-I1.000042 NS800.333.002 BEARING SPACER 36X45X141.00

2 2/

L915.32-1030.0/3 INK ROLLER ASSEMBLY IF90.5 FOR IF 90.5L915.32-1032.0/3 INK ROLLER ASSEMBLY IF84.5 FOR IF 84.5L915.32-1061.0/3 INK ROLLER ASSEMBLY R 64 FOR R 64L915.32-1881.0/3 FORM ROLLER ASSLY.DF90.5 FOR DF 90.5L915.32-4483.0/3 FORM ROLLER ASSEMBLY DF100 DF 100

01-10GROUP

REV -

HILINE


0001 NS059/132 SINGLE ROW BALL BRG 6304-2RS2.00


0003 L915.32-1062.0/3 COMPL.RUBBER ROLLER FOR R 641.00

L915.32-1571.0/3 COMPL.RUBBER ROLLER ASSEMBLY FOR IF 84.51.00

L915.32-1572.0/3 COMPL.RUBBER ROLLER ASSEMBLY FOR IF 90.51.00

L915.32-1878.0/3 DAMP.FORME ROLLER D.F.90.5 FOR DF 90.51.00#

L915.32-4476.0/3 DAMP.FORME ROLLER D.F.100 DF 1001.00*

"#" =CONSINDER IN PRINT UNIT DAMPENING SYSTEM. FOR DF 90.5

"*" = CONSINDER IN 4HI TOWER DAMPENING SYSTEM. DF 100

1 1/

L560.22-13892.0/2 SCORING ROLLER ASSEMBLY UPPER UPPERL560.22-13894.0/2 SCORING ROLLER ASSEMBLY BOTTOM BOTTOM

20-27/1GROUP

REV -

HILINE


0001 L560.02-13859.1/3 ECCENTRIC BUSH2.00

0002 L560.22-13858.2/3 SCORING ROLLER (915 W.W.)1.00

0003 NS016/033 FLT HEX NUT M16X24.00




0007 NS033/042 HEX. HEAD SCR. M12X60 -10.9 UPPER4.00NS033/137 HEX.HEAD.SCREW M12X70 BOTTOM4.00


0009 NS059/153 SINGL ROW BALL BRG 6209 2RS P52.00

0010 W06.04610-2505 LENS FLANGE BOLT*MRR*22152.00

0011 L560.02-20148.1/4 STOPPER BOTTOM2.00W16.03431-0096 SUPPORT UPPER2.00

0012 W16.03494-0010 STOPPER4.00

1 1/

L560.22-11778.0/9 INK DUCT ROL.ASSY.BOT.(NEW RE) BOTTOM

L560.22-11779.0/9 INK DUCT ROL.ASSY.UPP.(NEW RE) UPPER

L560.22-7911.0/9 INK DUCT ROLLER ASSLY.UPPER UPPER

L560.22-7912.0/9 INK DUCT ROLLER ASSLY.BOTTOM BOTTOM

20-28GROUP

REV - 001 7/4/2005

HILINE


0001 NS059/079 SINGLE ROW BALL BRG 6007 P622.00

0002 L361.20-7163.1/4 SPACER1.00

0003 L100-5950.0/3 INK DUCT ROLLER ASSLY. UPPER1.00

L100-5951.0/3 INK DUCT ROLLER ASSLY. BOTTOM1.00

L560.22-11757.0/3 INK DUCT ROLLER ASSLY. UPPER1.00

L560.22-11758.0/3 INK DUCT ROLLER ASSLY. BOTTOM1.00

0004 NS082/055 OIL SEAL A 42X62X71.00


0006 NS333/104 BEARING SPACER 35.3X44.8X51.00



1 1/


01-19/1GROUP

OIL SEALLESS

REV - 001 8/29/05

HILINE


0002 L361.20-8792.1/3 BEARING BUSH SI1.000003 L100-5238.1/3 BEARING BUSH SII1.000004 NS066/016 NEEDLE ROL.BRG NRB RNA 49072.00

0005 L361.20-7375.1/4 INNER RING2.000006 L361.21-0871.1/4 HOLDING PIECE2.000007 NS333/144 BEARING SPACER 36X45X161.000008 L361.20-8548.1/4 SPUR GEAR1.000010 NS059/027 SINGLE ROW BALL BRG 62061.000011 NS333/058 BEARING SPACER 28X40X251.00

0012 L361.20-2858.1/4 WORM1.000013 NS333/057 BEARING SPACER 28X40X101.000014 NS333/052 BEARING SPACER 25X36X161.000019 NS333/078 BEARING SPACER 45X54.8X32.000020 L361.20-7378.1/4 RING2.000023 NS020/027 CIRCLIP FOR BORE 553.00

0024 NS077/035 FITTING WASHER 45X55X12.000025 NS019/035 CIRCLIP FOR SHAFT 682.000028 NS021/018 SLOT.GR.SCR.-FLAT END M5X62.000029 NS075/069 FEATHER KEY A 10X8X251.000030 NS075/011 FEATHER KEY A 8X7X321.000033 NS029/026 SOC. HD. CAP SCREW M6X164.00

0036 L533.22-12223.0/3 FRICTION CYLINDER (DAMP.) FOR 533 C/O1.00

1 2/


01-19/1GROUP

OIL SEALLESS

REV - 001 8/29/05

HILINE


0036 L546.22-12222.0/3 FRICTION CYLINDER (DAMP.) FOR 546 C/O1.00L560.22-12224.0/3 FRICTION CYLINDER (DAMP.) FOR 560 C/O1.00L578.22-12221.0/3 FRICTION CYLINDER (DAMP.) FOR 560 C/O1.00

0037 L560.02-12225.1/4 END DISK1.000038 NS033/020 HEX. HEAD SCR. M12X30 -10.91.000039 NS073/028 SPRING WASHER AM 121.000040 NS800.333.002 BEARING SPACER 36X45X141.000041 NS333/049 BEARING SPACER 25X36X51.000042 NS800.019.002 CIRCLIP 25X2H IS:3075 PART-I1.00

2 2/

(#&'

#(#

%

(#

%

! "

#)

!

!

#

#

#

(#&'

#

(#

#"

"

%""

&' "

!

#)" "

#!$

(#! "

#!"

#!"

#!"

"#"

""

" "

! ""

#(

(#&'

#(

(#

&'"

(#!"

(#!"

(#

L546.22-12149.0/9 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 546 C/O



20-31GROUP

REV - 004 2/13/2008

HILINE


0001 L915.32-1246.1/4 SHAFT1.00

0002 L560.02-16323.1/4 ECCENTRIC BUSH2.00

0003 NS001/017 TAPER PIN 6X455.00

0004 L560.02-16324.1/4 LEVER4.00

0005 NS016/023 FLT HEX NUT M10X14.00

0006 L560.01-3580.1/4 STUD (76)2.00

0008 NS143/069 SINTERED BUSH 25X32X164.00



0013 U850A2594.1/4 LEVER4.00

0014 L915.32-1242.1/4 PIN2.00

0015 L560.02-4057.1/3 LEVER SII1.00


0017 L915.32-1861.1/4 ADJUSTING SPUR GEAR12.00

0018 U850A2581.1/4 LOCK RING8.00

0019 U850A2580.1/3 ECCENTRIC PIN8.00

0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00

0021 NS079/003 STEEL BALL 6MM12.00

0022 L560.02-4056.1/3 LEVER SI1.00

0023 T915B2424.1/3 ECCNTRIC PIN4.00

0024 T915B2423.1/4 LOCK RING4.00

0025 L915.32-1076.1/2 LEVER SII FW2,FW31.00

0026 L915.32-1077.1/2 LEVER SI FW2,FW31.00

1 3/




20-31GROUP

REV - 004 2/13/2008

HILINE


0027 L915.32-4004.1/2 LEVER1.00

0028 L915.32-4149.1/3 LEVER1.00

0029 L915.32-4150.1/3 LEVER1.00

0030 L915.32-4005.1/2 LEVER1.00

0035 T915B2521.1/4 BRACKET2.00


0038 L915.32-4016.1/2 LEVER1.00

0039 L361.30-2997.0/4 PNEUMATIC CYLINDER ASSEMBLY4.00

0043 L361.20-8827.1/4 STOPPER4.00

0044 L361.20-7410.1/4 HEXAGONAL BOLT4.00

0045 L361.20-7409.1/4 PIN4.00

0046 NS085/058 HELI.TEN.SPRING A2.5X18X106.00

0047 NS094/006 SPRING SCREW M6X284.00

0048 L915.32-4015.1/2 LEVER1.00

0049 NS041/017 SOC. GROOVED PIN 5X2012.00

0054 L915.32-1724.1/4 PIN1.00



0058 L560.02-13502.1/4 STUD (100) FOR 560 C/O2.00

L560.02-8650.1/4 STUD (108) FOR 546 C/O2.00

NS357/004 STUD M10X1XM10 LHX1X96 FOR 578 C/O2.00

0061 NS005/018 SPLIT CUTTER PIN 1.6X141.00


2 3/




20-31GROUP

REV - 004 2/13/2008

HILINE



0068 NS023/003 HEX BOLT WITH STEP M6X2012.00

0073 L361.20-7399.1/4 RING2.00

0075 NS016/034 FLT HEX NUT M10X1 L.H.4.00

0076 NS033/088 HEX. HEAD SCR. M8X60 -10.94.00

0077 NS033/071 HEX. HEAD SCR. M8X55 -10.94.00

0078 L915.32-1607.1/4 ECCNTRIC BUSH2.00

0079 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00

0081 L100-3640.1/4 PIN1.00

0082 L560.02-5706.0/4 PNEU.CYLINDER B 40X50 (MPS:6101.00

0083 L100-3641.1/4 FORK1.00

0084 L560.02-8719.1/4 PIN2.00

0085 L560.02-9952.1/4 LEVER1.00

0086 NS363/013 MALE EL.LCK-1/4-PK-6 8 44722.00

3 3/

L546.22-13018.0/9 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 546 C/O

L560.22-14119.0/9 ROLLER BRACKET ASSLY FW2 BOTTOM FOR 560 C/O


20-32/1GROUP

REV - 004 2/13/2008

HILINE


0001 L915.32-1246.1/4 SHAFT1.00

0002 L560.02-16323.1/4 ECCENTRIC BUSH4.00

0003 NS001/017 TAPER PIN 6X455.00

0004 L560.02-16324.1/4 LEVER4.00

0005 NS016/023 FLT HEX NUT M10X14.00

0008 NS143/069 SINTERED BUSH 25X32X16 FOR 546 C/O4.00

NS143/069 SINTERED BUSH 25X32X16 FOR 560 C/O4.00

U850A2559.1/4 BUSH FOR 578 C/O4.00



0013 U850A2594.1/4 LEVER4.00

0014 L915.32-1242.1/4 PIN2.00

0015 L560.02-4057.1/3 LEVER SII1.00

L578.02-14329.1/3 LEVER SII1.00



0018 U850A2581.1/4 LOCK RING8.00

0019 U850A2580.1/3 ECCENTRIC PIN8.00

0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00

0021 NS079/003 STEEL BALL 6MM12.00

0022 L560.02-4056.1/3 LEVER SI1.00

L578.02-14328.1/3 LEVER SI1.00

0023 T915B2424.1/3 ECCNTRIC PIN4.00

1 3/




20-32/1GROUP

REV - 004 2/13/2008

HILINE


0024 T915B2423.1/4 LOCK RING4.00

0025 L915.32-1076.1/2 LEVER SII FW2,FW31.00

0026 L915.32-1077.1/2 LEVER SI FW2,FW31.00

0027 L915.32-4004.1/2 LEVER1.00

0028 L915.32-4149.1/3 LEVER1.00

0029 L915.32-4150.1/3 LEVER1.00

0030 L915.32-4005.1/2 LEVER1.00

0035 T915B2521.1/4 BRACKET2.00


0037 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00

0038 L560.02-13020.1/3 LEVER SI1.00

0043 L361.20-8827.1/4 STOPPER4.00

0044 L361.20-7410.1/4 HEXAGONAL BOLT4.00

0045 L361.20-7409.1/4 PIN4.00



0048 L560.02-13021.1/3 LEVER SII1.00


0054 L915.32-1724.1/4 PIN1.00



0058 L560.02-13950.1/4 STUD (125) FOR 546 C/O2.00

L560.02-14116.1/4 STUD (115) FOR 560 C/O2.00

2 3/




20-32/1GROUP

REV - 004 2/13/2008

HILINE


0058 L560.02-8650.1/4 STUD (108) FOR 578 C/O2.00




0067 NS023/016 HEX BOLT WITH STEP 8X164.00


0073 L361.20-7399.1/4 RING2.00

0078 L915.32-1286.1/4 STUD2.00


0081 L915.32-1607.1/4 ECCNTRIC BUSH2.00

0083 L100-3641.1/4 FORK1.00

0085 L100-3640.1/4 PIN1.00


0087 L560.02-8719.1/4 PIN2.00

0088 L560.02-9952.1/4 LEVER1.00

0089 NS033/071 HEX. HEAD SCR. M8X55 -10.98.00

0090 NS363/013 MALE EL.LCK-1/4-PK-6 8 44722.00

3 3/

L546.22-9985.0/9 ROLLER BRACKET ASSY.FW1 UPPER FOR 546 C/O



20-33GROUP

REV - 003 2/13/2008

HILINE


0001 L915.32-1246.1/4 SHAFT1.00

0002 L560.02-16323.1/4 ECCENTRIC BUSH4.00

0003 NS001/017 TAPER PIN 6X455.00

0004 L560.02-16324.1/4 LEVER4.00

0005 NS016/023 FLT HEX NUT M10X14.00

0006 L560.01-3579.1/4 STUD (50)2.00




0013 U850A2594.1/4 LEVER4.00

0014 L915.32-1242.1/4 PIN2.00

0015 L915.32-1066.1/3 LEVER SII FW11.00



0018 U850A2581.1/4 LOCK RING8.00

0019 U850A2580.1/3 ECCENTRIC PIN8.00

0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00

0021 NS079/003 STEEL BALL 6MM12.00

0022 L915.32-1067.1/3 LEVER SI FW11.00

0023 T915B2424.1/3 ECCNTRIC PIN4.00

0024 T915B2423.1/4 LOCK RING4.00

0025 L915.32-1058.1/2 LEVER SII FW11.00

0026 L915.32-1059.1/2 LEVER SI FW11.00

1 3/




20-33GROUP

REV - 003 2/13/2008

HILINE


0027 L560.02-13886.1/3 LEVER SI1.00

0028 L915.32-4149.1/3 LEVER1.00

0029 L915.32-4150.1/3 LEVER1.00

0030 L560.02-13888.1/3 LEVER SII1.00

0035 T915B2521.1/4 BRACKET2.00


0037 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00

0038 L915.32-4017.1/2 LEVER1.00


0043 L361.20-8827.1/4 STOPPER3.00

0044 L361.20-7410.1/4 HEXAGONAL BOLT3.00

0045 L361.20-7409.1/4 PIN2.00



0048 L915.32-4018.1/2 LEVER1.00


0054 L915.32-1724.1/4 PIN1.00



0058 L560.02-6957.1/4 STUD (55) FOR 578 C/O2.00

L560.02-6958.1/4 STUD (70) FOR 546 C/O2.00

L915.32-1577.1/4 STUD (60) FOR 560 C/O2.00

0059 L361.20-3132.1/4 STOP BOLT3.00

2 3/




20-33GROUP

REV - 003 2/13/2008

HILINE


0060 L560.02-14635.1/4 STUD2.00





0073 L361.20-7399.1/4 RING2.00


0076 L100-3640.1/4 PIN1.00

0077 L100-3641.1/4 FORK1.00


0080 L560.02-8719.1/4 PIN2.00

0081 L560.02-9952.1/4 LEVER1.00

0082 NS033/071 HEX. HEAD SCR. M8X55 -10.93.00

0083 NS033/088 HEX. HEAD SCR. M8X60 -10.93.00

3 3/




20-34GROUP

REV - 003 2/13/2008

HILINE


0001 L915.32-1246.1/4 SHAFT1.00

0002 L560.02-16323.1/4 ECCENTRIC BUSH4.00

0003 NS001/017 TAPER PIN 6X455.00

0004 L560.02-16324.1/4 LEVER4.00

0005 NS016/023 FLT HEX NUT M10X14.00

0006 L560.01-3579.1/4 STUD (50) FOR 546 C/O2.00

L560.01-3579.1/4 STUD (50) FOR 560 C/O2.00

L915.32-1577.1/4 STUD (60) FOR 578 C/O2.00




0013 U850A2594.1/4 LEVER4.00

0014 L915.32-1242.1/4 PIN2.00

0015 L915.32-1067.1/3 LEVER SI FW11.00



0018 U850A2581.1/4 LOCK RING8.00

0019 U850A2580.1/3 ECCENTRIC PIN8.00

0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00

0021 NS079/003 STEEL BALL 6MM12.00

0022 L915.32-1066.1/3 LEVER SII FW11.00

0023 T915B2424.1/3 ECCNTRIC PIN4.00

0024 T915B2423.1/4 LOCK RING4.00

1 3/




20-34GROUP

REV - 003 2/13/2008

HILINE


0025 L915.32-1058.1/2 LEVER SII FW11.00

0026 L915.32-1059.1/2 LEVER SI FW11.00

0027 L915.32-4011.1/2 LEVER1.00

0028 L915.32-1140.1/3 LEVER SI FW1,FW2,FW31.00

0029 L915.32-1070.1/3 LEVER SII FW1,FW2,FW31.00

0030 L915.32-4012.1/2 LEVER1.00

0035 T915B2521.1/4 BRACKET2.00


0037 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00

0038 L915.32-4017.1/2 LEVER1.00


0041 NS033/004 HEX. HEAD SCR. M6X20-10.96.00

0043 L361.20-8827.1/4 STOPPER3.00

0044 L361.20-7410.1/4 HEXAGONAL BOLT3.00

0045 L361.20-7409.1/4 PIN6.00



0048 L915.32-4018.1/2 LEVER1.00


0054 L915.32-1724.1/4 PIN1.00



0058 L560.01-3580.1/4 STUD (76) FOR 546 C/O2.00

2 3/




20-34GROUP

REV - 003 2/13/2008

HILINE


0058 L560.01-3580.1/4 STUD (76) FOR 560 C/O2.00

L915.32-1286.1/4 STUD FOR 578 C/O2.00





0073 L361.20-7399.1/4 RING2.00


0076 NS033/071 HEX. HEAD SCR. M8X55 -10.93.00

0077 NS033/088 HEX. HEAD SCR. M8X60 -10.93.00

0078 L100-3640.1/4 PIN1.00

0079 L100-3641.1/4 FORK1.00


0082 L560.02-8719.1/4 PIN2.00

0083 L560.02-9952.1/4 LEVER1.00

0084 NS363/013 MALE EL.LCK-1/4-PK-6 8 44722.00

3 3/

/#!&

/#!

#

""

""

%

""

!

//

%

(!

" "

/#!&

/#!

%%

%%

%

%#! $$

"# "

%#"

%%

%(""

#!"

#!"

%#!$$

%!""

#!"

#! "

%( ""

"# "

/#!&

/#!

!"(

#!"

%#!""

""

%( ""

"# "

#

(

!//

(

"#"

#!"

##"

%%

%#!$$

!&'

!&'

!!11%

!!11%

!!11%

!!11%

//

//

(

#

#(#!"

"" /

"#"

"#"

%#!""

""

"#"

"#"

(#! "

%"

!&'

!&'

#

#

#!$

#

L915.32-1096.0/1 ROLLER WASHING DEVICE FW 1 PU1L915.32-1097.0/1 ROLLER WASHING DEVICE FW 2 PU2L915.32-1098.0/1 ROLLER WASHING DEVICE FW 3 PU3

01-18GROUP

REV -

HILINE


0001 L361.20-8869.1/4 LEVER1.000002 NS084/019 H.C.SPRING A 1.1X7.5X11.5X241.000003 L560.01-3965.1/3 BLADE BEAM1.00

0004 NS084/189 H.C.SPRING A1.1X19X11.5X1111.000005 L361.20-7587.1/4 ADAPTOR1.000006 L361.20-5578.1/4 STUD1.000007 NS084/025 H.C.SPRING B 0.8X8X7.5X202.000008 L361.20-8870.1/4 LOCKING SEGMENT1.000009 L361.20-5584.1/4 STAY BOLT4.00

0010 NS088/002 ACTUATING ROD A 8X50 PU11.00NS088/002 ACTUATING ROD A 8X50 PU21.00

0011 L915.32-1649.0/3 PAN ASSEMBLY1.000012 L915.32-1102.1/3 SUPPORT BLADE1.000013 L915.32-1103.1/3 DUCTOR BLADE1.000014 L915.32-1104.1/3 BEAM1.00

0015 NS333/128 BEARING SPACER 16X22X121.000016 L361.20-8877.1/4 ACTUATING ROD PU31.000017 L915.32-1594.1/4 BRACKET2.000018 NS019/016 CIRCLIP FOR SHAFT 221.000019 NS029/107 SOC. HD. CAP SCREW M6X701.000020 NS008/003 CHAMFERED WASHER 6.4x12x1.53.00

0021 NS056/021 BALL HANDLE B18 BLACK1.000022 NS039/021 GROOVED TAP. PIN(HALF LG) 6X321.00

1 2/

L915.32-1096.0/1 ROLLER WASHING DEVICE FW 1 PU1L915.32-1097.0/1 ROLLER WASHING DEVICE FW 2 PU2L915.32-1098.0/1 ROLLER WASHING DEVICE FW 3 PU3

01-18GROUP

REV -

HILINE


0023 NS039/010 GROOVED TAP. PIN(HALF LG) 4X323.000024 NS033/004 HEX. HEAD SCR. M6X20-10.92.000025 NS272/006 SOC.CSK HD.SCREW M6X1214.00

0026 L915.32-1593.1/4 STUD4.000027 NS033/037 HEX. HEAD SCR. M10X16 -10.94.000028 NS033/030 HEX. HEAD SCR. M6X16 -10.94.000029 L560.01-4266.1/4 BUSH1.000030 NS033/031 HEX. HEAD SCR. M6X40 -10.94.000031 NS333/122 BEARING SPACER 6X16X34.00

2 2/

L560.02-8571.0/9 LUBRICATION PUMP ASSLY.(HL-45)20-39

GROUP

REV -

HILINE


0001 L560.02-8564.0/3 ANGLE1.00

0002 L560.01-3180.0/9 DOWTY PUMP (1P 3017 CPSTB)1.00

0003 L560.01-3181.0/4 FLEXIBLE CLAW COUPLING1.00

0004 L560.01-3182.1/3 HOUSING1.00

0005 NE035/230 OIL PUMP MOTOR 0.37KW 415V 50H1.00

0006 NS033/012 HEX. HEAD SCR. M8X20 -10.96.00

0007 NS033/004 HEX. HEAD SCR. M6X20-10.94.00


0009 L560.01-4432.1/4 STRAIGHT CONNECTOR1.00

1 1/

L560.02-13663.0/3 MACKLING RING LUBRI.ASSY.RIGHT RIGHTL560.02-13664.0/3 MACKLING RING LUBRI.ASSY.LEFT LEFT

20-40/1GROUP

REV -

HILINE


0001 L100-3670.1/4 RING1.00

0002 L560.02-13658.1/4 STAY BOLT1.00

0003 L560.02-13659.1/4 FELT CARRIER1.00

0004 L560.02-13660.1/4 FELT STRIP1.00

0005 L560.02-13661.1/4 TORSION SPRING (LEFT) LEFT1.00L560.02-13662.1/4 TORSION SPRING (RIGHT) RIGHT1.00


0007 NS083/036 END DISC A 5.3X20X31.00

0008 NS272/003 SOC.CSK HD.SCREW M5X121.00

1 1/

L915.32-1219.0/1 WEB BRAKE DETECTOR ASSEMBLY Y FOR Y UNITL915.32-1303.0/1 WEB BRAKE DETECTOR ASSEMBLY H FOR H UNIT

01-41GROUP

REV - 001 2/7/05

HILINE


0001 NE062/022 IFM PHOTO.,EFFECT-200 OG5049-1.000002 L560.01-3664.1/4 CLAMP1.000003 L361.40-3659.1/4 HOLDER1.000004 L915.32-1218.1/4 SHAFT FOR Y UNIT1.00

L915.32-1301.1/4 SHAFT FOR H UNIT1.00

0005 L361.40-4729.1/3 LEVER FOR H UNIT2.00L361.40-4886.1/4 LEVER FOR Y UNIT2.00

0006 L361.40-4730.1/4 BOLT2.000008 NS033/014 HEX. HEAD SCR. M8X40 -10.91.000009 NS033/015 HEX. HEAD SCR. M8X45 -10.9 FOR H UNIT2.00

NS033/015 HEX. HEAD SCR. M8X45 -10.9 FOR Y UNIT4.00

0010 NS033/030 HEX. HEAD SCR. M6X16 -10.92.00

1 1/

!(#

%-%%

#

%

"# "

"# "

"#"

%#&('

%#('

%##(&'

#

"#"

"# "

%#

(

%#

(

%#

"#"

#

#! "

#! $

%#&('

%#('

%##(&'

#!"

#

(

#

#

L100-9160.0/9 BUSTLE WHEEL ASSEMBLY20-60/2GROUP

REV -

HILINE


0001 L100-9159.1/3 BRACKET2.00

0002 L560.01-2802.1/4 PIN2.00



0005 L560.01-2800.1/4 PIN2.00

0006 L560.01-2801.1/4 WHEEL2.00

0007 L560.01-2803.1/4 KNURLED KNOB2.00

0008 L560.02-14665.1/4 SHAFT1.00

0009 L560.02-6870.1/4 BUSH2.00

0010 NS001/031 TAPER PIN 3X162.00





0015 NS059/123 SINGLE ROW BALL BRG 6001-ZZ2.00

0016 NS333/208 BEARING SPACER 12X35X3.52.00

1 1/

L560.22-16563.0/2 MOTORISED BUSTLE WHEEL ASLY.WITH PHOTOSENSOR

20-60/3GROUP

REV -

HILINE


0001 L560.02-13032.1/4 SPINDLE1.00


0005 L560.02-13025.1/4 FLANGE2.00



0011 L560.02-7385.1/4 COUPLING2.00


0013 L560.02-7383.1/3 PLATE2.00


0016 NE035/356 7KG.CM.AC SYN.MOTOR SYN901(S)2.00

0019 L560.01-2801.1/4 WHEEL2.00




0023 L560.02-7386.1/4 PIN2.00

0027 L560.02-13031.1/4 LOCATING PIN3.00

0028 L560.02-7384.1/4 PIN2.00

0030 L560.02-7382.1/3 PLATE2.00

0031 NS001/016 TAPER PIN 6X401.00

0032 NS134/019 SOC.SET SCR.(CUP PT) M6X84.00

0033 NS333/208 BEARING SPACER 12X35X3.52.00

0034 NE062/039 IFM,PHOTO SENSOR1.00

0035 X915C1207.1/4 WEB BREAK DET.MOUNTING PLATE1.00

1 2/

L546.22-14218.0/9 WEB TENSION ASSLY WITH PIV FOR 546 C/OL560.22-14696.0/9 WEB TENSION ASSLY WITH PIV FOR 560 C/OL578.22-14695.0/9 WEB TENSION ASSLY WITH PIV FOR 578 C/O

20-68/1GROUP

REV -

HILINE


0002 W30.97035-1000 SPANNSATZ*IS1 24X50* MIT2.00

0003 L100-8825.1/3 SPUR GEAR1.00

0005 L100-9953.1/4 BUSH1.00

0008 L560.02-11908.1/4 COUPLING1.00

0012 L560.02-9286.1/4 BELT PULLEY1.00

0013 L560.22-4108.0/3 TENSION RUBBER ROLLER1.00

0017 L578.22-14590.2/3 TENSION ROLLER1.00

0018 L915.32-1320.1/4 STUD2.00





0024 NS029/009 SOCKET HD CAP SCREW M8X352.00

0028 NS033/030 HEX. HEAD SCR. M6X16 -10.98.00

0029 NS033/032 HEX. HEAD SCR. M8X16 -10.92.00



0037 NS059/104 SINGLE ROW BALL BRG 6307 ZZC21.00


0042 NS082/053 OIL SEAL A 35x55x71.00

0043 NS082/054 OIL SEAL A 35X62X71.00

0044 NS083/001 END DISC A 8.4X32X42.00


1 4/


20-68/1GROUP

REV -

HILINE


0048 NS275/048 FLAT WASHER 8.4X36X58.00



0057 L560.02-4079.1/3 LEVER SI1.00

0058 L560.02-4080.1/3 LEVER SII1.00

0059 L560.02-9723.1/4 PIN2.00




0064 U850A2580.1/3 ECCENTRIC PIN2.00


0067 NS079/003 STEEL BALL 6MM2.00

0068 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.82.00

0069 U850A2581.1/4 LOCK RING2.00

0070 L351.69-0011.1/4 STAY BOLT4.00

0071 L560.02-9222.1/4 PLATE2.00

0072 L915.32-1153.1/4 CONNECTOR1.00

0075 NS016/003 FLT HEX NUT M10X1.54.00

0076 L100-9890.1/4 LOCATING PIN2.00

0077 L100-9894.1/4 HOLDER1.00

0078 L100-9895.1/4 STUD2.00

0079 L100-9992.1/4 STUD2.00

0080 L100-9888.1/3 PLATE FOR 546 C/O1.00

2 4/


20-68/1GROUP

REV -

HILINE


0080 L560.02-14693.1/3 PLATE FOR 560 C/O1.00L578.02-14694.1/3 PLATE FOR 578 C/O1.00



0084 NS033/020 HEX. HEAD SCR. M12X30 -10.94.00


0087 L100-10189.1/4 TIMING BELT PULLY (8M-35S-24)1.00


0089 L100-10191.1/4 TIMING BELT 720-8M-24 POLYCHAI1.00

0090 NS033/013 HEX. HEAD SCR. M8X25 -10.93.00



0094 L100-8824.1/3 SPUR GEAR1.00

0095 L100-9889.1/4 INTERMEDIATE BOLT1.00



0098 NS033/012 HEX. HEAD SCR. M8X20 -10.98.00



0103 L100-9891.1/4 PIN1.00

0104 L560.04-4838.1/4 PIN1.00



3 4/


20-68/1GROUP

REV -

HILINE


0111 L100-4273.1/4 PIN1.00

0112 L100-9892.1/4 BRACKET1.00

0113 L100-9893.1/4 BLOCK1.00


0115 NS016/004 FLT HEX NUT M12X1.751.00



0120 NS033/092 HEX. HEAD SCR. M12X80 -10.91.00

0121 NS033/134 HEX. HEAD SCR. M10X70 -10.92.00



4 4/

%##

"#"

%"

#"

#"

""

/

##

) ""

!%!

!""

#!"

""

(##&'

##(

%

#!$

"""

L560.02-6962.0/3 INK DUCT ROLL.DRIVE UPPER20-76

GROUP

REV - 001 4/10/2006

HILINE


0001 L560.02-6840.0/3 PLANETARY GEAR BOX (INK DRIVE)1.00

0002 NE007.036.083 PMDC MOTOR DAMP/INK (HL) CYCLO1.00

0003 NS033/004 HEX. HEAD SCR. M6X20-10.910.00

0005 L560.02-6862.1/3 SPUR GEAR2.00

0006 NS083/063 END DISC A8.4X28X42.00

0007 NS272/009 SOC.CSK HD.SCREW M8X202.00


1 1/

!#

##

&'

%

#!"

(

(

!#(

!#

#!$

!

//

%%

%

#

!//

%%

%

!//

%

#%5#

%&5#('

%( ""

(

#!"

!

0

""

%%

#

""

%

""

!

""

(!&11'

("

#%5#

(

#%!

!6

"# "

(!&11'

("

%(

%!% ""

" "

"

!"(

#!"

""

(&

#!"

#%5#

#!"

#! $

#! "

",

#

## "

"# "

(

(

#

##

&' "

%#"

'"

(&""'

(&""'

#!"

(#

#%5#

%

#

%" "

#)""

#! "

#!"

"""

&'"

%#!$$

#%#5#

!

%""

%!""

%#'

#! "

!

!

#!"

"

"#"

#%#5

%

%( ""

(

#!"

!

0

""

%%

#

""

%

""

!

""

(!&11'

("

#%#5

(

#%!

!6

""

"# "

(!&11'

("

%(

%!% ""

" "

"

!"(

#!"

""

#!"

#!"

#! $

#%#5

#! "

",

#

## "

(

(

#

##

%#"

'"

(&""'

(&""'

#!"

(#

%

#

#%#5

%" "

#)""

#! "

#!"

"""

&'"

#

"#"

%!""

"##"

#! "

!

%

%%

%%

#! $

L560.02-14269.0/2 PIV MORORISED VARIAOR ASSLY.20-86

GROUP

REV -

HILINE


0001 L100-9902.1/4 COVER1.00



0004 L100-9906.1/4 STUD4.00

0005 L100-9915.1/3 PLATE1.00

0006 L560.02-13074.1/4 PIN1.00

0007 L560.02-5939.1/4 HOLDER1.00

0008 L560.02-8779.1/4 STAY BOLT1.00

0009 NE035/314 SRIJAN, AC SY.MOTOR, 60 RPM1.00

0010 NE052/036 BOURNS,10 TURN,1K,2W POTENTIOM1.00





0015 NS029/008 SOC. HD.CAP SCREW M8x304.00


0017 NS029/059 SOC. HD. CAP SCREW M4x123.00

0018 NS033/013 HEX. HEAD SCR. M8X25 -10.94.00

0019 NS075/124 FEATHER KEY A4X4X222.00


0021 W60.50000-0125 PLANETARY GEAR BOX1.00

0022 W60.70674-0001 COUPLING1.00

0023 W60.70678-0019 SPUR GEAR1.00

1 2/

L560.02-14269.0/2 PIV MORORISED VARIAOR ASSLY.20-86

GROUP

REV -

HILINE


0024 W60.70678-0020 SPUR GEAR1.00

0025 Z660.47-2.30:4 NUT1.00

2 2/

L560.02-14309.0/0 PRINT UNIT PIV ASSLY.20-87

GROUP

REV - 001 2/20/2008

HILINE


0001 W60.70676-0070 SHAFT21.00




0005 W60.70678-0076 HELICAL GEAR1.00





0010 NS077/051 FITTING WASHER 17X24X14.00

0011 W60.70676-0069 SHAFT WITH SUN WHEEL1.00

0012 W60.70678-0074 SPUR GEAR1.00

0013 W60.70678-0068 OUTPUT SHAFT1.00


0015 W60.70678-0075 HELICAL GEAR1.00

0016 W60.97040-0001 BALL BEARING 6206 NR DESIGN.SP2.00


0019 L100-10753.1/3 PRESSURE FLANGE1.00

0021 NS062/014 SINGLE THRUST B/BEARING 512061.00

0022 W60.70631-0066 BEARING BLOCK1.00

0023 W60.70678-0077 HELICAL GEAR1.00



1 4/


GROUP

REV - 001 2/20/2008

HILINE



0028 W60.70600-0055 DRIVE CORRECTION BRACKET ASSY.1.00

0029 W60.70678-0071 HELICAL GEAR1.00


0031 W60.70638-0080 FLANGE1.00


0033 W60.70678-0072 ANNULUS GEAR1.00



0036 NS172/010 RING 30X40X31.00

0037 NS172/021 RING 30X40X41.00


0039 W60.70676-0067 I/P SHAFT/PLANET CARRIER1.00

0040 NS135/018 SOC.SET SCR.(CONE PT) M5X82.00

0041 W60.70611-0078 PIN2.00

0042 NS077/013 FITTING WASHER 15X22X14.00

0043 NS077/050 FITTING WASHER 15X22X0.54.00

0044 NS338/006 NEEDLE CAGE K 14 18 17 H2.00

0045 W60.70678-0073 PLANET GEAR2.00

0046 W60.70615-0064 END CAP2.00

0047 NS082/010 OIL SEAL A 30X40X72.00


0049 W60.70615-0089 END CAP1.00

2 4/


GROUP

REV - 001 2/20/2008

HILINE


0050 W60.70698-0082 DISC SPRING1.00

0051 W60.70601-0085 PLATE1.00

0052 NS062/001 SINGLE THRUST B/BEARING 511081.00

0053 W60.70698-0081 SHIM1.00

0054 W60.70601-0084 PLATE1.00


0056 W60.70615-0062 RIGHT COVER PLATE1.00

0057 W60.70614-0061 PIV HOUSING1.00

0058 W60.70615-0063 LEFT COVER PLATE1.00

0059 NS147/005 SEALING BOLT M10X1X15.51.00

0060 L560.02-21112.2/3 BRACKET1.00

0061 W60.70638-0096 BUSH1.00


0063 W60.70676-0095 SHAFT1.00


0065 K136-17.04.09:2 BEVEL GEAR2.00



0068 L560.02-13072.1/4 SHAFT1.00


0070 L100-9914.1/3 BUSH1.00



3 4/


GROUP

REV - 001 2/20/2008

HILINE



0077 W60.70693-0088 STUD2.00

0078 W60.70693-0090 GUIDE2.00

0079 NS079/016 STEEL BALL 1/2"9.00

0080 NS275/031 FLAT WASHER 17X30X1.51.00

0081 W60.70696-0087 HEX. NUT1.00

4 4/

L560.22-13954.0/9 INERTIA ROLLER ASSEMBLY COMPL.20-88

GROUP

REV -

HILINE


0001 W06.00471-4265 PRESSURE SPRING MPN 4801 B3,6X3.00

0002 NS058/007 STAR HANDLE C503.00

0003 NS033/032 HEX. HEAD SCR. M8X16 -10.93.00




0007 W06.04610-2303 LENS FLANGE BOLT*MRR*22156.00


0009 NS222/005 SELF LOCKING NUT M10X1.53.00







0016 W06.35320-2015 BUSH*DIN*1494*16B18X15*P1*6.00

0017 W30.10999-0106 CLAMP RING2.00

0018 W30.52531-0002 HOLDER3.00

0019 W30.52531-0003 SPINDLE HOLDER3.00

0020 W30.52532-0108 LEVER(W30.52532-0002)3.00

0021 W30.52573-0111 ROLLER2.00

0022 W30.52573-0112 ROLLER1.00

0023 W30.52576-0114 THREADED SPINDLE3.00

1 2/

L560.22-13954.0/9 INERTIA ROLLER ASSEMBLY COMPL.20-88

GROUP

REV -

HILINE


0024 W30.52525-0106 SPINDLE1.00

0025 W30.52588-0104 KAPPE*(COVER)3.00

0026 W30.52593-0001 BOLT3.00

0027 W30.52593-0112 PIN3.00

0028 W30.54100-0366 PAPIERFUEHRUNGSROLLER1.00

0029 W30.54131-0166 HOLDER2.00




0033 NS059/128 SINGLE ROW BALL BRG 6003ZZ6.00


2 2/

L560.02-12182.0/9 WEB CATCHER ASSLY. INLET1002-60GROUP

I N D I A L T D

REVISION

HILINE EXPRESS


0001 W30.10999-0107 CLAMP RING2.00



0004 W06.16760-0103 LOCKING WASHER PAIR*MPN 33104.00


0006 L560.02-12184.1/4 HOLDER2.00

0007 W06.35320-2620 BUSH*DIN*1494*20B23X20*P1*2.00


0009 L560.02-12188.0/9 FINGURE GUARD ASSLY1.00


0011 W30.10976-0110 SPINDLE1.00

0012 W92.34517-2095 RING*MPN*4517*20X30X5*2.00

0013 L560.02-12183.1/4 LEVER1.00

0014 W30.10932-0112 LEVER1.00


0016 L560.02-12186.1/3 FINGURE GUARD III -12101.00

0017 W30.10955-0101 HOSE1.00

0018 W30.10920-0111 ANGLE1.00

0019 L560.03-12965.0/9 PN.ISO CYLINDER DSN-25-50-P FE1.00

0020 L560.01-10878.1/4 ROD CLEVIS TYPE B (M10X1.25)1.00

0021 W30.10993-0107 BOLT1.00

L560.02-12182.0/9 WEB CATCHER ASSLY. INLET1002-60GROUP

I N D I A L T D

REVISION

HILINE EXPRESS



0023 W06.02094-0207 ZYL.SCHRAUBE*DIN*912*M5X20*10.5.00

0024 W30.10922-0102 CLAMPING STRIP1.00

0025 W06.04260-1005 SENKSCHRAUBE*DIN*963*M5X8*4.8*12.00

L361.50-5023.0/9 HAND DRIVE ASSEMBLY01-69

GROUP

REV -

HILINE


0001 L361.50-5020.1/3 HELICAL GEAR1.00

0002 NS001/024 TAPER PIN 8X601.00

0003 NS051/008 HAND WHEEL 310X281.00

1 1/

REFERENCE COPY:

Hiline manual

Automotive

Transcript of Hiline manual