Hilco Industrial, LLC

WEBCAST/ONSITE AUCTION

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207Farmington Hills, Michigan 48334

Ph 248.254.9999 • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

Sale is being held in conjunction with

21700 Northwestern Hwy • Suite 1180Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

AUCTIONEERS • LIQUIDATORS • APPRAISERS

LIVONIA POWERTRAIN

NORTHSTAR V8 ALUMINUM HEAD LINELine will be offered in bulk subject to the piecemeal bidsIncludes (19) Makino Model A77 4-Axis Horizontal Machining Centers with Coolant throughSpindle; GSA Gantry Automation Rail Mounted Transfer Robots, Buffer Storage System4 – MAKINO A77 4-AXIS HORIZONTAL MACHINING CENTERS; S/Ns A96-232,

A95-219, A95-220 & A96-239 (TO 1996); Travels: X-800 mm, Y-750 mm, Z-770 mm; B-Axis Index .001 Degree, Spindle RPM 10,000; Taper HSK 100,40 Position ATC, Coolant through Spindle, Dual Arm Tool Changer, Fanuc 16-MB CNC Control, Dual Fixtured Pallets

15 – MAKINO A77 4-AXIS HORIZONTAL MACHINING CENTERS; S/Ns A96-231,A96-228, A95-223, A96-240, A96-226, A95-221, A96-22, A96-234, A95-224,A96-305, A96-306 & A96-241, A96-258, A96-308, A96-242 (TO 1996)

3 – GSA GANTRY AUTOMATION GANTRY RAIL MOUNTED ROBOTS; TotalRail Length Approx 225’, Includes 3 Robots; Includes: three (3) Makino ModelA-77 Horizontal Machining Centers with Coolant through Spindle, GSA GantryAutomation Rail Mounted Transfer Robot and Durr Buffer Storage System

1 – GSA GANTRY RAIL MOUNTED ROBOT; Rail Length 60’, Nematron Control, Op 28-4, BT 54-8736 (Col B-5 thru B-7)

1 – DURR ORDER 6040 BUFFER STORAGE SYSTEM (1997); VK Nr. OP 50,Rail Length 20’, Op 27-G (Col B-11)

1 – GSA GANTRY RAIL MOUNTED ROBOT; Total Rail Length 36’

PV8 ENGINE NORTHSTAR HEAD LINELine will be offered in bulk subject to the piecemeal bidsIncludes Lamb Transfer lines, Ransohoff Washers, Indramat Drives, Harry Major Conveyor system, RHM Hydraulic units, Fibro & GSA Gantry systems, (1991)3 – LAMB 10-STATION TRANSFER LINES; Op #10, #25 & #1401 – LAMB 26-STATION TRANSFER LINE; Op #201 – LAMB 22-STATION TRANSFER LINE; Op #401 – 27-STATION TRANSFER LINE; Op #601 – EXCEL PARTS HANDLING SYSTEM WITH NEMATRON CONTROL; Op #753 – RANSOHOFF 5408363 2-STAGE LINE WASHERS; S/Ns H-2074, 2075, 2076 (1991); Op #80, #125, #1501 – SCHENCK-TURNER LEAK TESTER WITH USON SERIES 4000 TESTER; Op #901 – GROB 13-STATION TRANSFER LINE; with Tarpon parts feeders, Sciemetric In-Process-

Test Signature Analysis System, Allen Bradley Panelviews, Op #1001 – LAMB 8-STATION TRANSFER LINE; Op #1101 – LAMB 25-STATION TRANSFER LINE; Op #1201 – G&L GILMAN ASSEMBLY AUTOMATION LINE; with Cooper torque tools, Op #1301 – ZONE ROLLER CONVEYOR HANDLING SYSTEM; Nematron Controls, Gantry load & unload2 – ABB IRB 6400-M96 ROBOTIC MATERIAL HANDLING CELLS; S/Ns 6400-4623R;

6400-5024R; S4 controls, 2.8-120kg, refurbished in 2004

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)2

HILCO INDUSTRIAL, LLC WEBCAST/ONSITE AUCTIONDIRECTIONSFROM DETROIT METROPOLITAN AIRPORT (DTW): EXIT DETROIT METROAIRPORT (DTW) ONTO SERVICE DRIVE AND TRAVEL TO MIDDLEBELT RD.TRAVEL NORTH ON MIDDLEBELT RD FOR TEN MILES TO PLANT ENTRANCEON RIGHT SIDE.

FURTHER INFORMATION• NOTE: ALL PEOPLE ENTERING THE PLANT FOR INSPECTION OR THE WEBCAST

MUST WATCH A SHORT SAFETY VIDEO & ADHERE TO ALL MLC SAFETY GUIDELINES.• A BUYERS PREMIUM OF 13.5 % FOR ALL ONSITE SALES & 16% FOR ALL WEBCAST

SALES WILL BE IN EFFECT. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTINGU.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS FRIDAY, NOVEMBER 5, 2010 WITH HOURS OF REMOVALBETWEEN 8AM TO 4PM MONDAY THRU FRIDAY. AFTER THE NOTED DEADLINE AT 4PMTHE BUYER WILL INCUR A COST OF $500 FOR ENTRY INTO THE FACILITY.

• FOR FURTHER INFORMATION ON MACHINERY & EQUIPMENT, PLEASE CONTACT KENPLANET AT 248.254.9999 x33 OR EMAIL KPLANET@HILCOIND.COM OR MARIOMAZZUCA AT 248-569-9781 OR MARIO@MAYNARDS.COM

• FOR PAYMENTS PLEASE CONTACT BECKY KUZNICKI AT 517.719.8134 OR EMAILBECKY@MAYNARDS.COM

• FOR CUSTOMER SERVICE, PLEASE CONTACT SANDI NEELY AT 248.254.9999 X16 OREMAIL SNEELY@HILCOIND.COM

AUCTION DATETHURSDAY, OCTOBER 14TH

BEGINNING AT 10AM LOCAL TIME

PREVIEW DATEWEDNESDAY, OCTOBER 13TH

9AM TO 4PM LOCAL & MORNING OF SALEFOR EARLIER INSPECTION, PLEASE CONTACT KEN PLANET AT 248.254.9999 x33 OR EMAIL KPLANET@HILCOIND.COM

AUCTION & PREVIEW LOCATION12200 MIDDLEBELT ROADLIVONIA, MI 48150

LIVONIA POWERTRAIN

For more information, please visit us on the web at www.hilcoind.com 3

CRANKSHAFT LINE

NEAR COMPLETE CRANKSHAFT LINELine will be offered in bulk subject to the piecemeal bidsFlexible Crankshaft Line, GSA and Dalmec Gantry Loaders/Unloaders3 – MAKINO J88-A40 CNC HORIZONTAL MACHINING CENTERS; S/Ns A97-32,

A97-44 & A97-45; Travels: X-800 mm, Y-800 mm, Z-770 mm; B-Axis rotary .001 deg, 14,000Spindle RPM with HSK 60 tooling; 10,000 Spindle RPM with HSK 100, Taper HSK 63 & 100, 40 Position ATC, Coolant through Spindle, Fixtured pallets, 800mm x 900mm x 950mm pallet worksize, Fanuc 16 mc CNC Control

3 – AMERICAN GFM FKS 15-2 CNC CRANKSHAFT MILLING MACHINES; GFMANS U6000 CNC Control

1 – INGERSOLL CM SYSTEMS UNDERCUT ROLLING MACHINE; S/N 744A; Op 60-1, Workheadand Tailstock on Linear Slides, Nine Rolling Heads, Rolling Head Toolspread approx 28”

4 – INGERSOLL CM SYSTEMS OIL HOLE DRILLING MACHINES; S/Ns 738A, 742A, 741A & 740A1 – PICO OIL FLOW & LEAK TESTER; Nematron controls, Uson Series 4000 testers, Op 85-11 – LANDIS CNC CBN ORBITAL PIN CHASING GRINDER; S/N 928-10; Landis 3200 CNC Control,

Op 140-1, Marposs E5H Gauge1 – LANDIS CNC CRANK PIN GRINDER; S/N 928-11; Landis 3200 CNC Control,

Op 140-2, Marposs E5H Gauge1 – LANDIS CNC CRANK PIN GRINDER; S/N 928-13; Missing Control, Op 140-3, Marposs

E5H Gauge2 – BOEHRINGER VDF250CM CNC THRUST WALL TURNING CENTERS; S/Ns 3686.01-824

& 3687.01-824 (BOTH 1997); Indramat MT CNC Control2 – BOEHRINGER VDF250CM CNC RELUCTOR NOTCH MILLING MACHINES; S/Ns 3690.01-824

& 3691.01-824 (BOTH 1997); Indramat MT CNC Control2 – ABB IRB 4400 DEBURRING ROBOTIC CELLS; S/Ns 4400-0744 & 4400-0746;

with S4 control1 – ITW-BALANCE ENGINEERING 5-STATION BALANCING MACHINE; CBI-2000 Balance Control, Op 2301 – TRI-TECH LASER ETCH SYSTEM (2001); Nematron Control, Op 2351 – IMPCO 5-STATION MICRO FINISHER; S/N MF195-1996; Op 2401 – TRI-TECH CRANKSHAFT PARTS WASHER; Op 245

For More Information, Please Visit

www.hilcoind.com

ENGINE, AGILE & ALUMINUM TRUCK BLOCK LINES

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)4

COMPLETE GEN IV ALUMINUM TRUCK BLOCK LINELine will be offered in bulk subject to the piecemeal bids1 – EXCEL 2-LANE CONVEYOR UNLOAD STATION; Op #011 – INGERSOLL 26-STATION BLOCK LINE TRANSFER-TYPE MACHINING

CENTER (2003); Nematron Controls, Indramat Drives, Op #301 – 28–STATION BLOCK LINE TRANSFER-TYPE MACHINING

CENTER (2003); Nematron Controls, Indramat Drives, Op #403 – ABB IRB6600-M2000 ROBOTIC MATERIAL HANDLING CELLS;

S/Ns 66-26838, 66-26822, 66-26823; S4C controller, 175kg-2.8m,year 2003-2004, Op #45,#125, #155

1 – HULLER-HILLE HEAD INDEXER BULK HEAD MILLINGMACHINE; S/N 40.008567 (1997); Mayfran pumpback system, GSAGantry, Op #50

25 – MAKINO J88 4-AXIS CNC HORIZONTAL MACHINING CENTERS,Travels: X-800 mm, Y-800 mm, Z-770 mm; B-Axis rotary .001 deg,14,000 Spindle RPM with HSK 60 tooling; 10,000 Spindle RPM withHSK 100, Taper HSK 63 & 100, 40 Position ATC, Coolant throughSpindle, Fixtured pallets, 800mm x 900mm x 950mm pallet worksize,Fanuc 16 mc CNC Control (TO 1997)

2 – DURR ECO-CLEAN PRIMARY AGILE BLOCK WASHERS; S/Ns 6125,6126 (1997); Nematron Control, Henry Filters Op #90, #170MA

1 – COMAU-PICO 3-STATION ROUGH LEAK TEST STATION; with Uson System 4000 testers, Nematron Controls, Op #100

1 – EXCEL MAIN BEARING DUNNAGE HANDLING SYSTEM; Op #1071 – INGERSOLL 20-STATION TRANSFER LINE (2003); with Filtra Systems

pump back system, Op #1201 – NAGEL 20-STATION CYLINDER BLOCK CRANK BORE FINISH

LINE; (4) Hydraulic tanks, Filtra pumpback system, Op #1601 – VALIANT AUTOMATED ASSEMBLY STATION; Op #1611 – COMAU-PICO 15-STATION LEAK TEST STATION; with Pin Stamp

Marker, Op #1801 – 3-LANE UNLOAD CONVEYOR SYSTEM; Op #185

PV8 ENGINE BLOCK LINELine will be offered in bulk subject to the piecemeal bidsIngersoll Transfer lines, year 1990, Harry Major Conveyor Systems, Indramat drives, RHM HydraulicUnits, Nematron Controls1 – INGERSOLL 24-STATION TRANSFER LINE; OP 10B1 – INGERSOLL 14-STATION TRANSFER LINE; OP 20B1 – INGERSOLL 9-STATION TRANSFER LINE; OP 30B1 – INGERSOLL 23-STATION TRANSFER LINE; OP 40B1 – INGERSOLL 19-STATION TRANSFER LINE; OP 50B1 – RANSOHOFF 54-8360 2-STAGE BLOCK WASHER; S/N H-2071; OP 60B1 – DURR MATERIAL HANDLING SYSTEM; with Uson leak tester, OP 22LC1 – SCHENCK-TURNER LEAK TESTER; OP 20MA1 – WILSON 18-STATION AUTOMATED ASSEMBLY LINE; OP 30MA1 – INGERSOLL 26-STATION TRANSFER LINE; OP 40MA1 – INGERSOLL 23-STATION TRANSFER LINE; OP 50MA1 – INGERSOLL 29-STATION TRANSFER LINE; OP 60MA1 – INGERSOLL 18-STATION TRANSFER LINE; OP 80 MA1 – SPACE MANAGER BUFFER; S/N 66-2796; includes ABB IRB 6600 M2000 Robot with S4C

control, year 2004, Op 95A

PARTIAL PV8 AGILE BLOCK LINELine will be offered in bulk subject to the piecemeal bids1 – GSA LOAD AND UNLOAD STATION; with (2) 30” conveyors, Op #101 – ENSHU JE80G CNC HORIZONTAL MACHINING CENTER; 20” x 24” pallets, CNC Control,

Op #30B1 – ENSHU JE80G CNC HORIZONTAL MACHINING CENTER; Nematron Control, (2) Daikin Inverter

Spindle Coolers, GSA Gantry Op #40MA5 – GSA OVERHEAD GANTRY SYSTEMS; with Nematron Controls (2001)3 – BUFFER AND CONVEYOR STATIONS; Op #51, Op #45MA, Op #30MA2 – DURR ECO-CLEAN PRIMARY AGILE BLOCK WASHERS; S/Ns 925700, 925800 (2001);

2 stage, Filtration system, Nematron control, Op #60, 701 – GROB 3-STATION LEAK TESTER (2001); with Uson 4000 testers, Nematron control, Telesis Pin

Marking Machine, Model TMM5100. GSA conveyors, Op #70B1 – WRIGHT-K RE-STACKING STATION; Nematron Control, Op#671 – CYNTELL TOOL SLAVE PLATE WASHER1 – WRIGHT-K LEAK TEST STATION; Op #51MA2 – FILTRA SYSTEMS TRANSFER TANK FILTER SYSTEMS; S/Ns 10522A, 10522D; with (2) 20 HP

Gorman Rupp pumps1 – NAGEL 12VS8-50 CYLINDER BORE/CRANK FINISH 23-STATION HONE; (6) Hydraulic units,

Indramat drives, Nematron Control, Op #50MA1 – GROB 4-STATION CNC TRANSFER TYPE MACHINING CENTER; Nematron Controls,

RHM Hydraulic tanks, Op #20MA

CONNECTING ROD & HEAD SUB ASSEMBLY LINES

For more information, please visit us on the web at www.hilcoind.com 5

COMPLETE PV8 HEAD SUB ASSEMBLY LINELine will be offered in bulk subject to the piecemeal bids1 – 240-STATION SUB-ASSEMBLY LOOP, includes; Comau-Pico and Noragen Handling System and

Automated Conveyors, Cooper and Tech Motive CS4000 Torque tools and monitors, Sew-Eurodrivemotors, Honeywell light curtains

6 – ABB IRB6400-M96 ROBOTS; S/N 5009, 5000, 4836, 5011, 5890, 5891 (1996); S4 controls, 2.4-120 & 2.8-120

2 – ABB IRB4400-M94A ROBOTS; S/N 0591, 0924 (1997); S4 controls, 1.95-45kg

1 – 246-STATION AND 254 DOUBLE LOOP ASSEMBLY LINE; ABB Conveyor & Comau Pico Material Handling

3 – ABB IRB6400-M98 ROBOTS; S/N 64A-12645, 12646, C64-11970 (2002); S4C Controllers, 2.8-120

1 – SPEN TECH 76-STATION TIMING KIT LOAD STATION

3 – DT-ATT ENGINE COLD TEST STANDS; with ATW testers

Line also includes ; (2) Oil Fill stations, Cooper Tool rundown stations, Zimmerman rail with balancers, ASEwasher, Aro Sealant Pumps, ABB stations; Rotate & Orients Cams Torque & turn , R/D Oil Pump, RundownCam Cover, Leak test, Repair, Rundown Intake, Rundown Head Plug, etc.

1 – 213-STATION LOOP ASSEMBLY LINE; ABB Conveyor and Comau Pico Material Handling, Airway Nut &bolt feeders

1 – HIRATA PISTON ROD ASSEMBLY MACHINE (2000)

3 – ABB IRB 6400-M98 ROBOTS; S/Ns 64A-11607, 11603, 11604; S4C controller, 2.8-120kg

2 – ABB GANTRY LOADERS/ROBOTS; S/Ns C80-0541; S4C controller

1 – MEIKLE APPLY RTV AND VISION INSPECT; with Cognex cameras

Line also includes the following stations; loader, ID label Engine, Load bearing to block, load crank to block,Spen Tech Pin Press, Load Piston Tray, Conn-Rod Rundown, load lcc to block, load manifold plate, install mainbearing bolts, rundown manifold bolts, rundown mains bolts, press crank seal, torque and turn, press dowel &cup plug, foreign material removal, oil pan load

COMPLETE TRI-WAY V8 POWDERED METAL CONNECTING ROD LINELine will be offered in bulk subject to the piecemeal bidsWith Gardner Disc Grinders and Cracking Technology 1 – EXCEL AUTOMATION SYSTEM (1992); Op #052 – GARDNER SDG6-42 DOUBLE DISC GRINDERS; S/Ns 898-62, 898-74; OP #10 & Op #20MA2 – TRIWAY 7-STATION TRANSFER LINES (1992); Indramat drives, Samsomatic Controller2 – TRIWAY 8-STATION ROD CRACKING MACHINES (1992); #1 – load, #2 – Cracker,

#3 – Vacuum,#4 – Bolts, #5 – Torque, #6 – Torque, #7 – Bushings, #8 – Rejects, Op #10MA1 – TRIWAY 7-STATION FINISH BORE TRANSFER LINE; Op #30MA1 – SCHENCK-TURNER BALANCER; Indramat Controls, Op #40MA1 – EXCEL 9929 2-STAGE CONN-ROD WASHER (1992); Op #401 – MICROMATIC 5HH-D8 CONN-ROD MICROSIZER; Op #50MA1 – RANSOHOFF 4-STAGE WASHER; S/N H-2078; Op #60MA

For More Information, Please Visit

www.hilcoind.com

CMMs & INSPECTION • PRESETTER • FABRICATING EQUIPMENT

To schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)6

COORDINATE MEASURING MACHINES & INSPECTION LAB1 – ZEISS PRISMO VP/9/15/7 PRODUCTION TYPE CMM; S/N 98744; 43” x 72” Granite Surface Plate,

x = 35.6”, y=59.1”, z= 27.6”, Umess software1 – ZEISS PRISMO-VAST CMM; S/N 97962; 40” x 72” Granite Surface Plate, Umess software4 – ZEISS PRISMO 7 VAST HTG PRODUCTION TYPE CMMS; S/Ns 99616, 99636, 98671, 96881; Compact

Control B7, 40” x 60” Granite surface plate, Umess software2 – ZEISS MC-850 CMMS; S/Ns 88520, 88538; 39.5” x 83” work area, no probes, Umess software1 – ZEISS MC-850 CMM ; S/N 88519; 46”X 84” GRANITE SURFACE PLATE1 – ZEISS-MAUSER KMZ-W-201210 CMM; S/N 1225 (1986); X= 78.7”, Y= 47.2” Z= 39.4”, RT= 31.5”2 – TAYLOR-HOBSON FORM TALYSURF-120 & TALYROND-3 ROUNDNESS CHECKERS1 – STUHR BENCH CENTER1 – SCHERR-TUMICO 30” OPTICAL COMPARATOR; S/N D82D4072 – LECO-OLYMPUS PMG-3 METALLURGICAL MICROSCOPES1 – OLYMPUS SZH10 STEREO MICROSCOPE1 – TUKON MICRO-HARDNESS TESTER WITH MICROSCOPELarge Quantity of Inspection Equipment; Includes: Thickness Gauges, Frequency Test Units, Set-up tooling, calipers,micrometers, height gauges, torque wrenches, plug gauges, dial gauges, bore gauges, gage block sets, layout plates, etc.

FABRICATING EQUIPMENT1 – ACCURSHEAR 625010 10’ X 1/4” POWER SQUARING SHEAR; S/N 3363 (1999); SC2 Backgauge Control,

96” Squaring Arm, Front Operated Power Back Gauge, Two (2) Front Stock Supports, BT 54-8502 (Col D-18)1 – CINCINNATI 135CB X 8 FT 135 TON HYDRAULIC PRESS BRAKE; S/N 44128; Overall Bed & Ram 10’,

Between Housings 8’ 6”, Stroke 8”, Daylight 15”, Stroke Control, 24” CompuBend Model SHR610 2-AxisBack Gauge, S/N NL980, BT 54-7765 (Col D-18)

1 – CHICAGO L-37 8’ BOX & PAN BRAKE; S/N 92924; Capacity 10 Gauge, BT N/A (Col D-18)1 – NEW DIMENSION P4.250 4’ X 1/4” INITIAL PINCH PLATE BENDING ROLL; S/N 9891155; Roll Diameter

6”, Power Drop End, Power Rear Roll Adjustment, Roll Grooves, BT N/A (Col D-18)1 – PEXTO 34 16 I 34” X 16 GAUGE INITIAL PINCH PLATE BENDING ROLL; S/N 387 9 95; Roll Grooves, BT N/A (Col D-18)1 – PEDDINGHAUS PEDDIMAX 66/110 IRON WORKER; S/N 442284138605003; 3550 psi, 250 bar1 – ROPER WHITNEY-PEXTO 17 5 TON PUNCH; S/N 01-961 – FLAGLER A20 20 GAUGE LOCKFORMER; S/N A307212712 – DORINGER D350 AUTOMATIC CUT-OFF SAWS; S/Ns 19438; with 8” roller conveyor & 23066; with 10” roller conveyor1 – PEERLESS LHM-320 CUT-OFF SAW; S/N P32191; 20” cap, 20” infeed and outfeed conveyor, year 19972 – JOHANSSON RADIAL ARM DRILL PRESSES; S/Ns 32693 & 32695; 20” x 44” table, 1800 rpm1 – BALDOR 3HP DOUBLE PEDESTAL GRINDER1 – KALAMAZOO 6” BELT SANDER

PRESETTER ROOM2 – KELCH TR3821EA9 TOOL PRESETTERS; S/Ns 3229,

3230 (1996); Ind Computer 615 Control3 – SIEBERT A5900 DIGITAL PRESETTER GAGES;

S/Ns GT-2752, 2538, 2582; Ind Computer 615 Control4 – VALENITE GTE PRESETTERS1 – TELEDYNE FIRTH STERLING DPE1079 DIGITAL

PRESETTER GAGE

TOOLROOM • CARPENTER SHOP • GENERAL EQUIPMENT

For more information, please visit us on the web at www.hilcoind.com 7

1 – ZIMMERMAN ZRS2 OVERHEAD CRANE;Includes Ingersoll Rand Pneumatic Hoist(Col D-18)

1 – ZIMMERMAN ZRS2 OVERHEAD CRANE;Includes Gardner Denver Pneumatic Hoist(Col D-18)

1 – ZIMMERMAN ZRS2 OVERHEAD CRANE;Rail Capacity 1,000 Lb; DeMag ElectricHoist

1 – ZIMMERMAN ZRS2 OVERHEAD CRANE;Rail Capacity 1,000 Lb; DeMag Power Hoist,BT 54-8646

2 – FIVE LEVEL MATERIAL RACKS; (Col D-18)1 – STEELTREE SERVICES 25 BAR &

SHEET STORAGE RACK; (Col D-18)1 – REELCRAFT HOSE REELS14 – BETTER ENGINEERING F-3000 PARTS

WASHERS; S/Ns 16480-484, 16474 14686-693 & NA; includes Heat.Oil Skimmer, 3 HPGusher pump, (To 1999)

1 – PARKER 43 SERIES HYDRAULIC HOSECRIMP MACHINE; with Cut-off saw

1 – PARKER 1025-110 HYDRAULIC HOSECRIMP MACHINE; with Brown 250 cut-off saw

1 – ALTO 26” MINI MAX RIDER SCRUBBER; S/N 022801 4014; Includes Charger

1 – EAGLE 1906 16 GALLON FLAMMABLE CABINET1 – MILLER SYNCROWAVE 350 AC/DC ARC WELDER1 – MILLER SRH333 330 AMP ARC WELDER

1 – MILLER CP-250TS 250 AMP ARC WELDER1 – LINCOLN R3R-300 WELDER1 – LINCOLN IDEAL ARC CV-300 WELDER1 – BINKS PAINT BOOTH; 6’ x 7.5’ x 10’ cap1 – RIDGID 1224 PIPE THREADER1 – GREENLEE 1818 PIPE BENDER; & cable puller1 – VICTAULIC VE-416-FSL PIPE GROOVER1 – PHOENIX 150-TYPE 300 DRY ROD OVEN1 – ROCKWELL 16MA HARDNESS TESTER;

S/N 72011 – ZERO BNP 55-6 SANDBLAST CABINET;

S/N 33565; with dust collector1 – WRIGHT 5-TON CRANE1 – WTC 3-TON A FRAME GANTRY CRANE1 – CIVES HP50 CARDBOARD BALERLarge Quantity of Torit Dust Collectors; Over 30Zimmerman rails; with 1/4 ton to 2 ton hoist and balancers; Andon/Bing Boards; Oxy-Acetylene CartsOver 300 Vidmar and Lista Cabinets; toolboxes,Knaack job boxes; Over (15) 3-wheel Bikes;Office Equipment & Café EquipmentLarge quantity of tooling including; C-clamps,chains, clevises, pneumatic hand tools, vises,Wilden Pumps, Aro pumps, Creform, RotaryParts bin, steel work benches, racks, WeldCurtains, angle blocks, rotary tables, chucks,grinding fixtures

TOOLROOM1 – LUCAS 3SP-48 3” HORIZONTAL BORING MILL; S/N 44108/ SP010127;

36” x 48” table, Acu-rite 3-Axis digital readout, rebuilt 19991 – LEBLOND MAKINO REGAL 15” X 72” ENGINE LATHE; S/N 15E-625; 3”

bore, 3-Jaw chuck, steady rest, tailstock1 – SOUTH BEND 13” X 26” ENGINE LATHE; S/N 167CG; 2” bore, 2500

rpm, 3-jaw chuck, tailstock, vise, Acu-rite 2-axis digital readout1 – JAFO FWR40J2 UNIVERSAL MILLING MACHINE; S/N C211 (1997); 16”

x 60” table, 1800 RPM, Acu-rite 3 axis digital readout1 – BRIDGEPORT SERIES 1 2 HP VERTICAL MILLING MACHINE; 9” x 42”

Power table, Acu-rite 2-axis digital readout1 – ACRA 3 HP VERTICAL MILLING MACHINE; 9” x 42” Power table, Acu-

rite 2-axis digital readout, Trachie AC Pro Drive (1989)1 – TRAK TRM CNC VERTICAL MILLING MACHINE; S/N 94-327; 10” x 45”

table, 4200 RPM, 5 HP, Protrak MX2 Control1 – PARKER MAJESTIC ID/OD CYLINDRICAL GRINDER; S/N 6271-2CA-98;

7 hp, Heidenhain digital readout1 – GALLMEYER & LIVINGSTON 360 10” X 24” HYD. SURFACE GRINDER; S/N 3601341 – REID 6” X 18” SURFACE GRINDER1 – K.O. LEE S818B 8” X 18” SURFACE GRINDER; S/N 280241 – CLAUSING-STARTRITE V900 VERTICAL BANDSAW; S/N 139761; with

Blade Welder, 1” blade width, 36” throat, year 19951 – KALAMAZOO H9AW 9” X 13” HORIZ. BANDSAW; with conveyor, 340 SFPM max1 – CINCINNATI MONOSET TOOL & CUTTER GRINDER; S/N 31521C5W-351 – HAMMOND MH-600-W-B-812 6” ABRASIVE BELT GRINDER1 – CINCINNATI SPL-TYPE 912-306-8 SINGLE WHEEL END GRINDER;

S/N 250335; 3 HP, 1140 motor rpm, 1800 spindle rpm1 – BROWN & SHARP 13 UNIVERSAL TOOL & CUTTER GRINDER; S/N 525-13-6181 – MORRISON KEYSEATER; S/N K9047331 – CLEERMAN DE SLIDING HEAD TAP & DRILL PRESS; S/N 65024; 5 HP,

19” x 24” table, 110 Volt, 1000rpm2 – FAMCO 6C & DAKE 50IP ARBOR PRESSES1 – DAKE ELEC-DRAULIC 50 TON SHOP PRESS1 – DAYTON 20” DRILL PRESS; 9 Speed10 – VARIOUS DAYTON & BALDOR GRINDERS

CARPENTER SHOP1 – TANNEWITZ G1E 36” VERTICAL BANDSAW; S/N 139FF1 – NORTHFIELD NO.4 TABLE SAW; S/N 632021-F1 – NORTHFIELD 12HD JOINTER; S/N 643776-J1 – OLIVER 34-DSS DISC & SPINDLE SANDER; S/N 57898; 30” Disc x 4” spindle1 – MILWAUKEE 8” PANEL SAW; 120 volt1 – ROCKWELL 14” RADIAL ARM SAW; with conveyor1 – FOSDICK DRILL PRESS; 24” x 24” table, 3600 RPM,2 – TORIT DF-4OD DUST COLLECTORS; S/Ns IG672050-001 & NA2 – TORIT SDF-6OD DUST COLLECTORS; S/Ns IG672050-010 & NA

GENERAL EQUIPMENT

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 100

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco Trading, LLC • Headquarters 5 Revere Drive, Ste. 430 • Northbrook, IL 60062 • All rights reserved Printed in USA • MOTO3424 • IL License #444000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX)Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • Phoenix • San Francisco • Toronto • Villahermosa (MX)

Terms of SaleA buyer’s premium of 13.5% for onsite sales & 16% for webcast sales is in effect. Everything will be sold tothe highest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies ofwhich will be posted on the premises of the sale andsubject to additional terms announced the day of sale.All items will be sold “as is, where-is” without any warranties, express or implied. Although obtained fromsources deemed reliable, the Auctioneer makes no warranty or guarantee to the accuracy of the information herein contained. Bidders are encouragedto thoroughly inspect the items on which they intend tobid prior to sale. Absolutely no items will be removeduntil the day after the conclusion of the sale and payment is made in full. Subject to additions, deletionsand prior sale.

Payment: ALL PURCHASES MUST BE PAID IN FULLON THE DAY OF THE AUCTION. If you intend to pay bywire transfer, we will accept payment the day after thesale ONLY IF a deposit of 25% of total purchases ismade on the day of the sale. Contact our office for wiretransfer instructions. Only cash, wire transfer or certified check, payable to Maynards will be accepted.Company checks payable to Maynards will be accepted only if accompanied by a bank letter of guarantee, (see sample letter below). All sales are subject to sales tax. Purchasers claiming exemptionsfrom taxes must provide proof satisfactory to theAuctioneer of their entitlement to claim such exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees paymentto Maynards from (Company Name). This guaranteewill be valid for purchases made at the Auction of Motors Liquidation Company Livonia on October 14, 2010

HILCO WEBCAST/ONSITE AUCTION

LIVONIA POWERTRAIN