Hilco Industrial, LLC

WebCast/OnsIte auCtIOn

State of the Art Cabinet Manufacturing Facility

Thursday, October 27th • 10:00 am Local Time

West Jordan, Utah

Equipment no longer required in the continuing operations of

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

31555 West Fourteen Mile Road, Suite 207Farmington Hills, Michigan 48334

Ph 877.37.HILCO (44526) • Fx 248.254.9995

Hilco Industrial, LLC

www.hilcoind.com

Sale is being held in cooperation with

www.stilesmachinery.com

Auctioneers • LiquidAtors • ApprAisers

21700 Northwestern Hwy • Suite 1180Southfield, Michigan 48075-4923

Ph 248.569.9781 • Fx 248.569.9793

www.maynards.com

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)2

HILCO InDustRIaL, LLC WebCast/OnsIte auCtIOnDIReCtIOnsfROm saLt Lake CItY InteRnatIOnaL aIRPORt: exIt aIRPORt OntObangeRteR HWY. COntInue sOutH On bangeRteR HWY. 12.4 mILes tO W 9000 s tuRn RIgHt, tuRn Left On W OLD bIngHam HWY anD COntInue tOPROsPeRItY RD, tuRn RIgHt On PROsPeRItY RD., tO PLant On RIgHt. WatCHfOR auCtIOn anD PaRkIng sIgns.

fuRtHeR InfORmatIOn• an 18% buYeR's PRemIum WILL be CHaRgeD On aLL assets. tHe buYeR’s

PRemIum WILL be ReDuCeD tO 15% fOR PaYments maDe bY CasH, COmPanYCHeCk OR WIRe tRansfeR. auCtIOn WILL be COnDuCteD In engLIsH, aCCePt-Ing u.s. CuRRenCY OnLY.

• REMOVAL DEADLINE IS NOVEMbER 18th WIth hOURS OF REMOVAL bEtWEEN 8AM tO4PM MONDAY thRU FRIDAY. AFtER thE NOtED DEADLINE At 4PM thE bUYER WILLINCUR A COSt OF $500 FOR ENtRY INtO thE FACILItY.

• fOR fuRtHeR InfORmatIOn On maCHIneRY & equIPment, PLease COntaCt geORge LaIDLaW at 616.732.1800 OR emaIL gLaIDLaW@HILCOInD.COm

• fOR PaYments PLease COntaCt LesIa JOsePH at 616.732.1800 x19 OR emaILLJOsePH@HILCOInD.COm OR HILCO aCCOunts ReCeIvabLe atHIn_aR@HILCOInD.COm

• fOR CustOmeR seRvICe, PLease COntaCt sanDI neeLY at 248.254.9999 x16 ORemaIL sneeLY@HILCOInD.COm

auCtIOn Date

tHuRsDaY, OCtObeR 27tH

begInnIng at 10am LOCaL tIme

PRevIeW Date

WeDnesDaY, OCtObeR 26tH

9am tO 4Pm LOCaL & mORnIng Of saLeFor EarliEr inspEction, plEasE contact GEorGElaidlaw at 616.732.1800 X14 or EmailGlaidlaw@hilcoind.com

auCtIOn & PRevIeW LOCatIOn10026 PROsPeRItY ROaDWest JORDan, utaH 84081

aRea HOteLsWest JORDan HamPtOn Inn & suItes 801-280-7300

COuRtYaRD saLt Lake CItY aIRPORt 801-532-4085

faIRfIeLD Inn & suItes saLt Lake CItY aIRPORt 801-355-3331

equipment no longer required in the continuing operations of

All Equipment Installed New 2006/2007. In Operation from April 2007 To December 2008. Extremely Low Run-Time Hours

CNC PANEL SAWS 9 – HOLZMA MODEL HPV510-38/16/L CNC PANEL SAWS, S/Ns 0-240-15-

3511, 0-240-15-3510, 0-240-15-350, 0-240-15-3508, 0-240-15-3507, 0-240-15-3505, S/N 0-240-15-3504, 0-240-15-3502 (All 2006), All withPower Center Computer Control Operator's Station, Infeed Table, ServoBackgauge & Outfeed Table, Holzma Automatic Stacker & OutfeedConveyor, Machine # PS401, BT #23747, Col. # Q-28

1 – HOLZMA MODEL OPTILIFT HEE 33/16 PANEL SAW 407 Infeed Lift TableS/N 0-243-15-3524, (2006), Used In Conjunction With # PS407

1 – HOLZMA MODEL PROFILINE HPP 380/31/31/L CNC PANEL SAW, S/N1-240-15-3514 (2006), Power Center Computer Control Operator's Station,Infeed Table, Servo Backgauge & Outfeed Table, Machine # PS421

1 – HOLZMA MODEL PROFILINE HPP 380/31/31 CNC PANEL SAW, S/N 1-240-15-3515 (2006), Power Center Computer Control Operator's Station,Infeed Table, Servo Backgauge & Outfeed Table, Machine # PS422

for more information, please visit us on the web at www.hilcoind.com 3

CnC maCHIneRY • eDge sanDeR • PaneL sanDeR • eDge COateR

CNC MACHINING CENTER 1 – WEEKE MODEL PROFILINE BHC 655 CNC MILLING / DRILLING /

BORING MACHINING CENTER, S/N 0-250-17-0972 (2007), ComputerConsole Control, (2) Vacuum Power Units, (8) Table Clamping Pods, 3-Sided Enclosure Fence

CNC EDGE BANDER 1 – HOMAG MODEL OPTIMAT KAR 310/6/A3/S2 CNC EDGE BANDING

MACHINE, S/N 0-200-03-8542 (2006), Homag Power Control PC22Control Station, 12-Reel Unwind Stand

EDGE SANDER 1 – HEESEMANN MODEL UKP22 EDGE SANDING MACHINE, S/N

2006.08.242 (2006), 2) Sanding Heads, Sanding Belt Size 2300mm, Entry& Exit Brush Cleaner Heads, Continuous Thru Feed Conveyor Track,Touch Screen Control

PANEL SANDING 1 – COMPLETE HEESMANN FLAT PANEL SANDING LINE, With Sanders,

Panel Cleaners, and Transfer Conveyors (2006), *Note: Line May BeOffered In Bulk Subject To Piecemeal Bids

1 – REMAINING COMPONENTS OF A FLAT PANEL SANDING LINE,Sanders, Cleaners and Conveyers

*Note: DSL 402 Is Incomplete As A Line And Will Be Offered In PiecemealComponents Only

EDGE COATER 1 – HOMAG / SORBINI MODEL PROFILINE FR14/16/08 SINGLE SIDED

EDGE COATER MACHINE, S/N 0-203-03-8341 / MEDGE0Z (2006), 31"Wide Single Side Thru Feed Conveyor, (2) Sanding Belt Heads, (1)Oscillator Buffer Wheel Head, (3) Applicator Stations With Applicator Pump,Roller, & UV Oven, Control Panel

STAINING / UV DRYING LINE 1 – UV LINE # UV 401, COMPLETE STAINING AND UV DRYING LINE, (2006) With Roll Coaters,

Panel Cleaners, Ovens and conveyors *Note: UV Line May Be Offered In Bulk Subject ToPiecemeal Bids, Complete Line Breakdown at www.hilcoind.com

AUTOMATED PANEL SORTING STATION 1 – BARGSTEDT MODEL RTSP 410/DG/40/16 AUTOMATED PANEL SORTING STATION, S/N

0-281-05-6632 (2006), Gantry Type Pick-N-Place Robot With Vacuum Panel Lifting Attachment,Stationary Gantry Frame, Control Panel With Power Control PC21 Operator's Station,Automatic Power Sliding Panel Entry / Exit Doors, 8) 4'x10' Power Roller Conveyor Tables,Power Roller Conveyor Transfer Car, Interfaced Enclosure Fence, *NOTE: This Sorting StationIs Used With UV Line # UV 401, And May Be Offered In Bulk With UV Line

staIn, gLaze & CLeaR COat fInIsHIng LInes • COnveYOR LInes

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)4

MANUAL SPRAY STAIN FINISHING LINES 2 – GLOBAL FINISHING SOLUTIONS RECIRCULATING BOOTH MANUAL

SPRAY STAIN FINISHING LINE SF#401; SF#402, (BOTH 2006) With SprayBooths, Drying Oven and monorail conveyor *Note: Line May Be Offered InBulk Subject To Piecemeal Bids, Including;

GLAZE FINISHING LINE 1 – CEFLA GLAZE FINISHING LINE, Including; Conveyors and Ovens (2006) *

Note: Line May Be Offered In Bulk Subject To Piecemeal Bids

CEFLA AUTOMATED CLEAR COAT FINISHING LINES *Note: These Lines Are Designed To Operate As An Overall System, Or AsIndependent Stand-Alone Lines. System May Be Offered In Bulk Subject ToIndividual Line Bulk Bids And Individual Piecemeal Bids

4 – CEFLA AUTOMATED CLEAR COAT FINISHING LINES (ALL 2006) LineTCF 401, TCF 402, TCF403, TCF404, Each with Panel Cleaners, AutomatedSprayer, Denibbers, Oven, Transfer Conveyors*Note: Line May Be Offered InBulk Subject To Piecemeal Bids, Including;

PRODUCT OUTFEED BELT CONVEYOR LINES (*Note: Outfeed From Cefla Finishing Lines)

1 – TRANSNORM OUTFEED LINE 402, Including,

1 – INCLINED OUTFEED BELT CONVEYOR, 50" Wide x 20', 12" High Sides

1 – TRANSNORM 90-DEGREE SECTION, Type TS 1500/140, S/N R4060-03, Belt Width 55",Radius Inside 188"

1 – DEMATIC POWER BELT CONVEYOR, 50" Wide, Approx. 60' Length, Inclined End Sections,Below Floor Grade Mid-Section

1 – TRANSNORM 90-DEGREE SECTION, Type TS 1500/140, S/N R4060-02, Belt Width 55",Radius Inside 188"

1 – DEMATIC 50" x 35' POWER BELT CONVEYOR

1 – SORBINI MODEL VS32-1 OUTFEED CONVEYOR BRUSH CLEANER, S/N 06010/69 -MP2ST026212

4 – DEMATIC OUTFEED STAGING BELT CONVEYORS 03, 04, 05 and 06, 50" x 36'

1 – CROSS-OVER WALKWAY

1 – TRANSNORM OUTFEED LINE 404

1 – 404 TRANSFER CONVEYOR 02, Dematic 50" x 17' Power Belt Conveyor,

1 – TRANSNORM 90-DEGREE SECTION, Type TS 1500/140, S/N R4060-01, Belt Width 55",Radius Inside 188"

1 – 404 TRANSFER CONVEYOR 04, Dematic 50" x 30' Power Belt Conveyor

1 – TRANSNORM 90-DEGREE SECTION, Type TS 1500/140, S/N R4060-04, Belt Width 55",Radius Inside 188"

1 – 04 TRANSFER CONVEYOR 06, Dematic 50" x 52' Power Belt Conveyor

1 – SORBINI MODEL VS32-1 OUTFEED CONVEYOR BRUSH CLEANER, S/N 06010/70 -MP2ST026211

1 – 404 OUTFEED STAGING CONVEYOR 08, Dematic 50" x 36' Power Belt Conveyor

3 – 404 OUTFEED STAGING CONVEYORS 09, 10, 11, Dematic 50" x 13' Power Belt Conveyors

1 – CROSS-OVER WALKWAY

1 – DEMATIC CORP OUTFEED CONVEYORS 402 & 404 MAIN CONTROL CABINET, With AllenBradley SLC 5/04 CPU PLC Controls

All Equipment Installed New 2006/2007. In Operation from April 2007 To December 2008. Extremely Low Run-Time Hours

PROCess bOILeRs • fInIsHIng ROOm equIPment • saWs & sHaPeRs

for more information, please visit us on the web at www.hilcoind.com 5

PROCESS BOILERS (used in conjunction with the Cefla Automated finishing lines)

2 – FULTON MODEL VMP-150 FUEL-FIRED HOT WATERBOILERS, S/N’s 102313, 102309 (Both 2006), Natural GasFired, BTUH Output 5175, SH-3/8, HD-1/2, HS-352, MWP-60, Maximum BTUH Input At 0-2999 Ft. Altitude 5978000,Fulton Programmable Digital Burner Control, With Bell &Gossett Size 1510 BF 11 4E Hot Water Recirculation Pump,Max. WP 175 PSI, GPM-585, Ft.-105, 25-HP, 1800 RPM

FINISHING ROOM EQUIPMENT 1 – DRI QUIK MODEL 4-18x48G CONVEYORIZED THRU-

FEED ELECTRIC INFRARED DRYING OVEN, S/N D007-043 (2006), 12.32 KW, 144,000 BTU, 48" Belt ConveyorWidth, Oven Length, 10-1/2', Control Panel With TouchScreen Operator Interface

1 – GLOBAL FINISHING SOLUTIONS MODEL RCB-128-SRECIRCULATING TYPE SPRAY BOOTH, S/N 65472-B(2006), FL401 Flat Line 401 Spray booth 03, TONER, ManualSpray, Inside Dimensions 9'x12' x 8' High, 4-Stage Filtration

1 – GLOBAL FINISHING SOLUTIONS MODEL RCB-128-SRECIRCULATING TYPE SPRAY BOOTH, S/N 65472-A(2006), FL401 Flat Line 401 Spray booth 03, STAINBOOTH, Manual Spray, Inside Dimensions 9'x12' x 8' High,4-Stage Filtration

1 – FLAT LINE 401 FINISHING LINE, Including; *Note: LineMay Be Sold In Bulk Subject To Piecemeal Bids

1 – GLOBAL FINISHING SOLUTIONS MODEL RCB-128-SFLAT LINE 401 SPRAYBOOTH 01, Industrial Type Spraybooth, SEALER-TOPCOAT, Manual Spray, Recirculation &Exhaust Units, 4-Stage Filtration, (2) Container Vessels WithBinks Supply Pumps & Air Mixers, Connector Tunnel

1 – MG SERVICES GAS FIRED DRYING OVEN, (2006), AllenBradley MicroLogix 1500 PLC With GE Fanuc Quick PanelView Touch Screen Interface, ABB Programmable InverterDrive, Honeywell Burner Control, 2-Pass 180-DegreeTurnaround, Approx. Footprint 28'W x 60'L, In-Floor ChainConveyor Drive w/ 36" Transport Carts, 3'x8' Manual RotaryTable Top Surface End Flat Line 401 Finishing Line

5 – DENRAY MACHINE MODEL 3696B STH DOWNDRAFTTABLES, S/Ns 471962, 471993, 472113, 472112, 471955(ALL 2006), Table Working Surface 36" x 96", 5.0-HP

2 – DYNABRAKE MODEL 647657 DOWNDRAFT TABLES,S/N’s KMW DDT004, N/A, 48" x 96", Open

1 – LOT OF ASSORTED STAINLESS STEEL TUBINGTHROUGHOUT FINISHING ROOM

CABINETRY / WOODWORKING

MACHINERY – SAWS & SHAPERS 2 – ALTENDORF MODEL F-45 SLIDING TABLE SAWS,

S/N’s 06-05-10-117, 06-05-10-120 (Both 2006),Adjustable Saw Fence System, Slider 3400Programmable Interface, 5.5 KW, Maximum Saw BladeDiameter 500mm

1 – WHIRLWIND MODEL 212 UP-ACTING CUT-OFFSAW, S/N 8056M32L, With Tiger Stop ProgrammableLength Gauge, 10' Table

1 – DELTA MODEL 43-459 INDUSTRIAL SHAPER, S/N06A118745 (2007), With Maggi Model STEFF 2048Automatic Power Feed Unit, Type 13701523, S/N1370600321

1 – RITTER MODEL CR354 SINGLE SPINDLE VERTICALSHAPER / SANDER, S/N 111

bORIng maCHInes • tRImmIng & nOtCHIng maCHInes • gRInDeRs

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)6

BORING MACHINES 1 – WEEKE MODEL OPTIMAT ABD 100 CNC AUTOMATIC BORING / DOWELING

MACHINE, S/N 0-253-11-1404 (2007)

32– BLUM MODEL MINIPRESS M51P1005 USMI AUTOMATIC BORING /DRILLING MACHINES, S/N’s FA02480, FA03175, FA03179, FA03180,FA02479, FA03178, FA03188, FA02431, FA01893, FA03191, FA01894,FA01895, FA03185, FA03181, FA02368, FA03170, FA03190, FA03186,FA03092, FA03174, FA03184, FA02432, FA03183, FA03182, FA03171,FA03093, FM00151, (ALL 2006), JH00729, JH00724, JH00731, JH00725JH00728 (2007), Power Holddown Clamps, Table Mounted

1 – BLUM MODEL MINIPRESS M51P1005 USMI AUTOMATIC BORING /DRILLING MACHINE, S/N FAO1896, (ALL 2006), Set-Up For Horizontal Boring,Set-Up Table Mounted

1 – KREG SINGLE POCKET BORING MACHINE, S/N DK362623

1 – KREG SINGLE SPINDLE POCKET BORING MACHINE, S/N DK362624

TRIMMING & NOTCHING MACHINES 1 – BRANDT MODEL OPTIMAT F13+EK13 TRIMMER / ROUTER, S/N 0-260-02-

8576 (2002)

1 – DODDS MODEL DBN-36-1-HD BACK NOTCHING SAW, S/N DBN 06064 830,

1 – PISTORIUS MODEL MN-302S DOUBLE BLADE 90-DEGREE TOENOTCHERSAW, S/N 300615

FRAMING TABLES 6 – SYSTECH HANDLING MODEL SY1054B 62 STANDARD FRAMING TABLES, S/N’s MS30055/60708,

MS30053/60708, MS30050/60708, MS30052/60708, MS30054/60708, MS30056/60708, 4'x8' Steel PlateWork Surface, (3) Pneumatic Clamping Holddowns, Mounted On Electric/Hydraulic Scissors Lift Table

DRAWER GLUE APPLICATORS 1 – DODDS MODEL GP26F-W/PIVOT GLUE APPLICATION UNIT, S/N GP06099-304

DRAWER CLAMPS 8 – DODDS MODEL C-48 CNC-K DRAWER CLAMP UNITS, S/N’s C06009-216, C060011-246, C07018-267,

C07024-270, C07020-269, C07019-268, C07025-271, C06010-245 (ALL 2006), Allen Bradley Logix 5555 PLCWith Panel View 600 Interface, Servo Drives, Mounted On Pneumatic Scissors Lift Table

HINGE PRESSES 9 – CREATIVE AUTOMATION MODEL 11331 PNEUMATIC POWERED HINGE PRESS STA-

TIONS, S/N’s 11456-1006 1 - 11458-1006, 11457-1006, 11462-1006, 10461-1006, 11460-1006, 11463-1006, 11465-807 11464-807 (ALL 2006)

WASTE WOOD GRINDERS 1 – WEIMA MODEL TIGER 1000 WOOD GRINDER, S/N 600-477 (2006), 60-HP, Power Feed

Rolls, Control Panel (*Note - Disconnected)

2 – WEIMA MODEL WRR 1000 VIBRATORY SHAKER INFEED TABLES, S/N’s 610-214,610-213 (Both 2006), 3-Sections - (2)10', (1)6-1/2', 38" Wide With 8" High Sides, 22" FloorTo Table Height, 10-HP, (*Note - Disconnected)

1 – WEIMA MODEL TIGER 600 WOOD GRINDER, S/N 600-481 (2006), 50-HP, Power FeedRolls, Control Panel, With Vibratory Shaker Infeed Table

MISCELLANEOUS WOODWORKING 2 – RITTER MODEL CR258 HORIZONTAL EDGE SANDERS, S/N’s 165, N/A (Both 2006),

7-1/2 HP, Belt Size 8" x 66", Adjustable Side Work & End Work Tables

All EquipmentInstalled New

2006/2007. In Operation from

April 2007 ToDecember 2008.Extremely Low

Run-Time Hours

stORage & RetRIevaL sYstem • mateRIaL HanDLIng • DIsPLaYs

for more information, please visit us on the web at www.hilcoind.com 7

MATERIAL HANDLING 15 – DOUBLE SIDED CANTILEVER STORAGE RACKS, 48" Adjustable Arms With Lock Pins, 20' Upright

Height, Each Section With (3) Uprights & 3' Cross-Bracing, 8' Overall Section Width 12 – GRAVITY ROLLER CONVEYOR TYPE FLOW RACKS, Adjustable Pallet Rack Type Frame, Size 12'W

x 72"D x 72"H, 3-Tier, With 14" Wide Gravity Roller Conveyor Tracks 11 – GRAVITY ROLLER CONVEYOR TYPE FLOW RACKS, Adjustable Pallet Rack Type Frame, Size 12'W

x 72"D x 72"H, 2-Tier, With 32" Wide Gravity Roller Conveyor Tracks Large Quantity - Metzgar GravityRoller Conveyor, Large Quantity of Power Belt Conveyer, Southworth Electric/Hydraulic Portable LiftTables w/ Gravity Conveyor Top Surface, Floor Track Mounted Gravity Conveyor Transport Carts

3 – BUCKEYE STAINLESS STEEL MIXING TANKS, S/N 28956, 28955, N/A, Tank Dimensions 40"Diameter x 40" High, Non-Pressure Rated, Design Metal Temperature Range -20 to 200 Degrees F, WithPneumatic Agitator & Pump

Over 500 Sections HEAVY DUTY ADJUSTABLE PALLET RACKING, 22' High,42" Deep, 11' Cross Beams, 4-Tier Cross Beams, BoltedLot - Quantity Adjustable Pallet Racking, Various Size Over 20 Sections Vertical Panel Board Storage Racks, Adjustable Pallet RackStyle Uprights w/ Back Wall Cross Beams & Z-Bar Panel Divider Brackets, UprightSize 10' & 11' High x 42" Deep, 12' Cross Beams Large Quantity Material Handling Carts, Panel Carts, Shop Trucks, Conveyor Carts,Bin Carts, etc. Various Size & Configurations OVER 100 - COLLAPSABLE PLASTIC SKID BOXES, 32" x 30", 23-1/2" InsideHeight, 29" Overall Height OVER 500 AKRO-MILS MODEL AKRO BIN STACKABLE PLASTIC TOTE BINS,18" Wide x 28" Long x 12" High, Open Front QUANTITY - PORTABLE FLEXIBLE ROLLER-SKATE GRAVITY CONVEYORS,Various Lengths

PRODUCT DISPLAYS PRODUCT DISPLAYSINCLUDING KITCHEN, BATH, & OFFICE SETTINGS

OFFICE LOT - OFFICE FURNITURE & SUPPLIES

AUTOMATED STORAGE & RETRIEVAL SYSTEM *Note: Storage Racking Systems and AGV Forklifts May Be Offered As A System InBulk, Subject To Component Breakdown Piecemeal Bids

8 – HK SYSTEMS MODEL HK3000RF Aisle 1 to 8 A & B RACK SYSTEMS WithAutomated Storage & Retrieval Crane System, S/N’s 100068-23432P-001,100068-23432P-002, 100068-23432P-003, 100068-23432P-004, 100068-23432P-005, 100068-23432P-006, 100068-23432P-007, 100068-23432P-008(ALL 2006), (2) Aisles Storage Racking, Each Aisle Approx. 165', Each Aisle With15 Sections, Rack Section Size 48" Deep x 11' Wide x Est. 40' Height, StructuralGrade Steel Uprights & Cross Beams, 4-Tiers Cross Beams, Bolted, OperationalControl & Programming Panel, Interlocked Enclosure Fence, AGV ForkliftLoad/Unload Station, Upper Tier Levels With Safety Backstop/Catch Net, HourMeter Reading 196.2 Hours

18 – AGV PRODUCTS MODEL CBF-3 AUTOMATIC GUIDED FORKLIFT VEHI-CLES, S/N’s 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223,224, 225, 226, 227, 228, (ALL 2006), Capacity 1360 Kg. @ 1.5m, Lift Height 1.5m,Weight Unloaded Less Battery 2653 Kg., Speed 1.0 m/sec., 48 Volt System, 48"Fork Length, Touch Screen Panel, Unit # AGV-402, (*Note – Batteries RemovedFrom Vehicles, Vehicles Being Sold Without Battery)

1 – BATTERY HANDLING SYSTEMS MODEL BE-36-2-DS FORKLIFT BATTERYHANDLING & TRANSFER SYSTEM, S/N HC100143 (2006), With Stand-UpRider Transfer Car, Battery Storage Rack System, 2-Tier, 24 Battery Capacity,(*Note - All Batteries & Chargers Have Been Removed From System)

LARGE QUANTITY (Over 1,000) Automated Storage System Material Carts, CasterMounted Steel Pallet Base, Base Size 48" x 60", With Enclosure Sides & DividerPanels, Heights & Divider Configuration Varies

AIR HANDLING 8 – HONEYVILLE DUST COLLECTORS, All With # HBCF63 Blower, 150 H.P. Motor,

Air Lock, 7.5 H.P. MAC Blower2 – HONEYVILLE DUST COLLECTORS, Both With # HBCF47 Blower, 125 H.P.

Motor, Air Lock, 5 H.P. MAC Blower1 – VACUUM BLOWER, Roots #418 RAM-J Rotary Lobe Blower, 60 H.P. Motor2 – ADWEST TECHNOLOGIES REGENERATIVE THERMAL OXIDIZER SYSTEMS,

Both with (2) 57,500 CFM RTO's w/ Allen Bradley PV 1000 Control Interfaces, 350H.P. Blowers, (1) With S/N 2291A Burner Hrs. 156, NGI Hours 2255, S/N 2291BBurner Hrs. 151, NGI Hrs 2473 and (1) With S/N 2291C Burner Hrs. 144, NGIHours 1488, S/N 2291D Burner Hrs. 118, NGI Hrs 1456

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995

www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco trading, LLC • Headquarters 5 Revere Drive, ste. 206 • northbrook, IL 60062 • all rights reserved

Printed in usa • masCO • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong (Greater China) •

Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Singapore • Thailand • Toronto • Villahermosa (MX)

Terms of SaleAn 18% buyer's premium will be charged on all assets. thebuyer’s premium will be reduced to 15% for paymentsmade by cash, company check or wire transfer. Everythingwill be sold to the highest bidder for cash, in accordancewith the Auctioneer’s customary “terms of Sale”, copies ofwhich will be posted on the premises of the sale and sub-ject to additional terms announced the day of sale. All itemswill be sold “as is, where-is” without any warranties,expressed or implied. Although obtained from sourcesdeemed reliable, the Auctioneer makes no warranty orguarantee to the accuracy of the information herein con-tained. bidders are encouraged to thoroughly inspect theitems on which they intend to bid prior to sale. Absolutelyno items will be removed until the day after the conclusionof the sale and payment is made in full. Subject to addi-tions, deletions and prior sale.

Payment: ALL PURChASES MUSt bE PAID IN FULL ONthE DAY OF thE AUCtION. If you intend to pay by wiretransfer, we will accept payment the day after the saleONLY IF a deposit of 25% of total purchases is made onthe day of the sale. Contact our office for wire transferinstructions. Only cash, wire transfer or certified check,payable to hilco Industrial, LLC will be accepted. Companychecks payable to hilco Industrial, LLC will be acceptedonly if accompanied by a bank letter of guarantee, (seesample letter below). All sales are subject to sales tax.Purchasers claiming exemptions from taxes must provideproof satisfactory to the Auctioneer of their entitlement toclaim such exemptions.

Sample Bank Letter(bank Name) unconditionally guarantees payment tohilco Industrial, LLC from (Company Name). thisguarantee will be valid for purchases made at theAuction of Masco Cabinetry on October 27, 2011.

HILCO WebCast/OnsIte auCtIOn

FollowUs on:

State of the Art Cabinet Manufacturing Facility

Thursday, October 27th • 10:00 am Local Time

West Jordan, Utah

Equipment no longer required in the continuing operations of