High quality just in time · High quality just in time Ourproducts The input trays to fill the...
23
High quality just in time Kretingos str. 24a, LT-92211, Klaipeda, Lithuania. Phone: +370 610 67000; +370 680 72335 www.amekus.eu E-mail: [email protected]
Transcript of High quality just in time · High quality just in time Ourproducts The input trays to fill the...
High quality just in time
Kretingos str. 24a, LT-92211, Klaipeda, Lithuania.
Phone: +370 610 67000; +370 680 72335
www.amekus.eu
E-mail: [email protected]
UAB AMEKUS is an experienced and dynamic company, with qualified and young team
of professionals. We design and manufacture welded and assembled constructions,
hoppers, exhaust systems and other technological equipment for industrial and
technological purposes from various metals for more than 15 years. Our activity covers
Baltic’s and Scandinavian countries with various Client’s through Energy, Chemicals
and Power sectors.
Management and quality control of our company are based on an embedded standards
ISO 9001, ISO 14001, OHSAS 18001, our production is certified ISO 1090, class EXC3.
High quality just in time
High quality just in time
Ducts – ducts for hot air flow, approx. 350 tons, material grade Corten.
Our products
High quality just in time
Our products
Multipurpose cargo tanks 150 m3 ( for barite, bentonite, cement). Register class DNV GL.
High quality just in time
Our products
Installation of 20 Ft and 40 Ft heat exchanger containers for floating offshore
crane under Loyd’s register .
High quality just in time
Our productsInstallation of the systems and the connecting of equipment to systems made of stainless steel
AISI 316. This project has been made for air supply and wastewater disposal, as well as steam supply
system. The total weight of all the assemblies are 70 tons.
High quality just in time
Our products
Bended pipe with platforms and supports, Ø 2300 mm, length 22 m.
Stainless steel chimneys with aluminum platforms and details.
High quality just in time
Our products
High quality just in time
Our products
Marine towing lines drums. Weight of steel cable
on a reel of 130 tons. Drums with transport
foundations weighing 6700 kg each. Dimensions:
Length 4700 mm, width 4350 mm.
25 pcs marine towing lines drums. Weight of steel cable on a reel of 260 tons. Drums Ø 6500 mm, with transport foundations weighing up to 12.270 kg each.
High quality just in time
Our products
The system of ventilation ducts with platforms, stairs and railings. The total length of the ducts is
125 meters. The diameter of the main channel is 3,300 mm and the diameter of the branches - 2000
mm. All flange connections of segments had been tested for compatibility after their manufacture. The
total weight of the entire ventilation system amounted to 150 tons.
High quality just in time
Our products
Ventilation ducts for melting furnaces. The total weight of the project amounted to 38 tons.
Segments are connected through the flanges. The feature of this project is that the channel is deviding
into two brances and connects to chimneys threw watercooled Butterfly valves. Inside the vents
mounted special anchors on which a ceramic insulation were applied that protects the system from
overheating.
High quality just in time
Our products
Butterfly valve watercooled flaps diameter 2000 mm. The body is made of heat-resistant and
corrosion-resistant steel Corten A (S355JOWP) and the flap itself is made of stainless steel AISI 316.
These flaps are operating by pneumatic cylinders.
High quality just in time
Our products
The input trays to fill the melting materials to furnace. Structurally, the tray reduces the feed rate,
which eliminates the splashing of the molten metal and allows the raw material fed into the melting
zone accurately. The tray is made of a two-layer tube. The inner surface of the pipe is covered with a
layer of hardened metal that is resistant to impact and abrasion when moving fed materials. These
enhancements significantly extend the life of the feed channel tray.
High quality just in time
Our products
Chute production, 12.950 kg. Chevron elevations, 8 pcs., up to 16580 kg
each.
High quality just in time
Our products
The gates of the dry dock are made in sections of the 9 segments, which are collected at the place of
installation and finally joined by welding. Section length 12 m, width 3 m, total length of the dry dock
gate 28 m. Construction weight is 120 tons. Also 6 water pumps are mounted in to the gate
construction.
High quality just in time
Our products
Ventilation pipes for heated air, material grade Corten B.
Steel constructions approx. 430 tons for warehouse in Sweden. Deliveries of 17,5 m long beams.
High quality just in time
Our products
High quality just in time
Our products
Stand - approx. 8,4 tons material grade S355NL.
High quality just in time
Our products
Lift baskets – 5 units, for the fire machine, material grade AISI 304 and AlMg3
High quality just in time
Our products
Tanks - Modec Sepia LOS tank, 4 units, AISI 316L
High quality just in time
Our products
Oil tanks – oil tanks, steel grade AISI316.
High quality just in time
Our products
Roller conveyor – weight more then 4000kg, full assembling with engines and chains.
High quality just in time
Our products
Feeder plates – more then 700 units done very short term.
