High Level Battery Test Description
description
Transcript of High Level Battery Test Description
Analyse Assure Accelerate
TM
High Level Battery Test Description
Analyse Assure Accelerate TM
Spirent Proprietary Information
Test Setup
Flex 3 System
RF
Handset
DC Power Supply
Current Mea s urem ent Equipm ent / Logging Device
Analyse Assure Accelerate TM
Spirent Proprietary Information
Test setup
• The measurement technique described in the “GSM/ECTEL Battery Life Measurement Technique Document” could also be looked at.
• Either method does not affect the spirit of the test as the target is to get a snapshot of UE current draw and not battery capacity.
Analyse Assure Accelerate TM
Spirent Proprietary Information
Standby
• Test measures the average current consumption during idle state, which quickly calculates the standby time of the UE in minutes instead of days.
• Test is performed with a current sensing power supply. Battery capacity is determined by dividing the battery (mAh) by the measured average idle current (mA).
• Variables in the test case are SIB parameters that effect standby.
• SIB values will be based on actual field data.
Analyse Assure Accelerate TM
Spirent Proprietary Information
Dynamic Standby
• Test measures the average current consumption during idle state, which quickly calculates the standby time of the UE in minutes instead of days.
• Test is performed with a current sensing power supply. Battery capacity is determined by dividing the battery (mAh) by the measured average idle current (mA).
• Variables in the test case are the 3GPP fading models and idle cell reselection.
• Idle cell reselection suggestion will be based on actual field data. User will have option to change value.
Analyse Assure Accelerate TM
Spirent Proprietary Information
Dynamic Talk time
• Test measures the average current consumption during idle state, which quickly calculates the talk time of the UE in minutes instead of days.
• Test is performed with a current sensing power supply. Battery capacity is determined by dividing the battery (mAh) by the measured average idle current (mA).
• Variables in the test case are the 3GPP fading models and amount of time spent in soft/softer handoffs.
• Soft/Softer handoff parameters will be based on collected field data. This will be done for both urban and suburban environments.