Hi Lift-Catering Champ - Nandan GSE

download Hi Lift-Catering Champ - Nandan GSE

of 2

Transcript of Hi Lift-Catering Champ - Nandan GSE

  • 7/30/2019 Hi Lift-Catering Champ - Nandan GSE

    1/2

    CATERING CHA

    NANDAN'S Hi Lift built on

    for intenational flights and t

    roduct is designed with ut

    and ease of maintenance. We

    grace it exudes shall charm al

    P REFRIGERATED

    shok Leyaland 1518/52 or similar is designed for being economic

    o carry payload of 3000kgs to height of 5.9m from ground. Th

    ost care and with an eye on aesthetics, functionality and reliabilit

    are sure this equipment shall be the cynosure of your fleet and th

    your passenger customers!

    I L I FT

    l

    e

    y

    e

    NE-HL-03

    06FC

  • 7/30/2019 Hi Lift-Catering Champ - Nandan GSE

    2/2

    NE-HL-03/06 FCNANDANs Full Cabin Catering CHAMP

    (Hi Lift)

    February 10 /RJ/BROC

    Type: Full Cabin Hi Lift on AshokLeyland 1518/52

    Specifications: See Chassis spec SheetOVERALL DIMENSIONS

    Overall Length: 9140mm Overall Height : 3740mm Overall width : 2670 mmVAN BODY

    Exterior Length: 7100mm Interior Length : 2500mm Interior Height : 2075mm Payload Capacity: 3000kgs Floor Ht fully raised : 5900mm Floor Ht fully lowered : 1660mm Insulation : 75mm PUF Floor : 6mm Al. Chq. plate duly argon welded Rear Entrance : 1200mm insulated rolls

    upshutter doors with seal tight insulation of

    PUF

    Front Entrance : 1200mm insulated rollsupshutter doors with seal tight insulation of

    PUF

    Sides : FRP+PUF sandwich panels Trays : 2 nos each side 2380 x 500 made of SS

    304 18g fixed at a height of 48

    Bumpers : UHMW-PE bumpers fixed alongthe side in two rows- one at 4 and another at

    36

    Trolley Binders:SS 304 and 3mm thick top hatwith holes at 50mm pitch fixed at 30 height

    for trolley tying.

    Belts : Nylon belts -4nos provided along withratchet and galvansied clippers

    FRP :Inside FRP is certified food grade Structure : Entire structure of body is

    galvanized before fabrication utmost care is

    taken for corrosion resistance

    Mudgard : FRP mudguard with rubbermudflaps

    Canopy : Full width canopy provided withhydraulic movement of 1500mm. the canopycan be operated from the body or driver cabin

    Four way platform (Full Cabin)

    Fixed platform width : 2400mm Fixed platform length: 900mm LR platform width : 910mm LR platform length: 900mm Left right movement : 610mm In Out movement : 500mm Height (Van down) : 2750mm Capacity rating : 1000 kg Platform valance : All SS 304HYDRAULIC SYSTEM

    Maximum pressure : 2500psi Pump flow rate : 72 lpm at 1500 rpm

    (DOWTY make)

    PTO : Drive transmission mounted (PTO) Reservoir capacity : 150 litres Controll valve : 24 VDC solenoid ATOS make

    from Italy

    Lift Cylinders : Single stage trunion mounted,NANDAN make

    Hoses : All high pressure hoses GATES brandwith ISO fittings

    Pipings : Seamless pipings in annealed andpickled pipes

    ELECTTRICAL SYSTEM

    Voltage : 24 VDC Panels : Driver Cabin , Van Body, Emergency in

    SS 304 boxes

    Valves : ATOS make, Italy Circuit : Relays (PLA Brand) based hence easy

    to troubleshoot and repair

    Buzzer : A buzzer will sound during allOperation

    Wiring : Wiring is number coded and jointlessEMERGENCY OPERATIONS

    DC POWERPACK, HAND PUMPREFERIGRATION UNIT

    Carrier Supra 844 (SPLIT)

    Refrigeration Capacity : 0C (7525W), -20C(4685W) at 30C Ambient

    Airflow : 2470 m/hr Fuel supply : from orginal diesel tank of vehicle mounting on vehicle chassis the powerpack is

    installed and evaporator on the vanbody