HHSL1 - Orion Energy Systems

6
© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON , APOLLO ® , HARRIS and InteLite ® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners. 800.660.9340 | orionlighting.com HARRIS LED HIGH BAY STAR LINE, GEN 1 HHSL1 Applications The HARRIS HHSL1 is an innovative high bay for new construction or retrofit. The low profile design offers energy savings, low maintenance, and control options for low or high bay settings in industrial, commercial, and retail applications. Lumen Maintenance See lumen maintenance table on page 2 Warranty Orion HARRIS class LED fixtures are covered by a five-year limited warranty subject to the ambient operating temperature. Refer to ambient operating temperature on page 4. When sensors are used with product in applications below 0ºC (32ºF), written approval from factory is required for warranty to apply. Accessories and individual components are covered by separate OEM supplier warranties Electrical Available in 120v-277v, 347v and 480v Factory wired for full dimming (0- 10v) or ON/OFF applications Fixture Certifications & Listings Buy American Act Compliant UL/cUL Listed UL Damp Listed DesignLights Consortium™ Premium qualified luminaire Visit the DLC QPL for listed models Patent Information Orion is serious about intellectual property. This product may be covered by one or more patents. Patent information available at http://www. orionlighting.com/about/patents Features Narrow lightweight 2' and 4' I-Frame aluminum body allows for optimal thermal management and ease of handling during installation Available with four different light distribution types: No lens, acrylic frosted general lens, acrylic frosted narrow lens, and acrylic clear focus lens Rigid and suspended mounting options 6 kV/3 kA surge protection standard, 20 kV/10 kA surge protection available Factory installed sensor options Battery back up available in 10w or 20w Field installed precision fit fixture wireguard available for 2' and 4' fixture lengths HHSL1E1UNVND850LAFGPF (Lens Option Shown) 1

Transcript of HHSL1 - Orion Energy Systems

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

HARRIS LED HIGH BAY STAR LINE, GEN 1

HHSL1Applications The HARRIS HHSL1 is an innovative high bay for new construction or retrofit. The low profile design offers energy savings, low maintenance, and control options for low or high bay settings in industrial, commercial, and retail applications.

Lumen MaintenanceSee lumen maintenance table on page 2

WarrantyOrion HARRIS class LED fixtures are covered by a five-year limited warranty subject to the ambient operating temperature. Refer to ambient operating temperature on page 4. When sensors are used with product in applications below 0ºC (32ºF), written approval from factory is required for warranty to apply. Accessories and individual components are covered by separate OEM supplier warranties

Electrical • Available in 120v-277v, 347v

and 480v• Factory wired for full dimming (0-

10v) or ON/OFF applications

Fixture Certifications & Listings• Buy American Act Compliant• UL/cUL Listed• UL Damp Listed• DesignLights Consortium™

Premium qualified luminaire • Visit the DLC QPL for listed models

Patent InformationOrion is serious about intellectual property. This product may be covered by one or more patents. Patent information available at http://www.orionlighting.com/about/patents

Features

• Narrow lightweight 2' and 4' I-Frame aluminum body allows for optimal thermal management and ease of handling during installation

• Available with four different light distribution types: No lens, acrylic frosted general lens, acrylic frosted narrow lens, and acrylic clear focus lens

• Rigid and suspended mounting options

• 6 kV/3 kA surge protection standard, 20 kV/10 kA surge protection available

• Factory installed sensor options• Battery back up available in 10w

or 20w• Field installed precision fit fixture

wireguard available for 2' and 4' fixture lengths

HHSL1E1UNVND850LAFGPF(Lens Option Shown)

1

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

2

Performance Information, 277v, 5000K, >80 CRI3

Lumen Maintenance with No Lens7

Fixture SizeNominal

Lumen CodeNominal Lumens Operating Temperature

Calculated Lumen Maintenance

L70 L80 L90

2' A1 9,00025˚C 238,000 149,000 71,000

55˚C 204,000 128,000 61,000

2' B1 12,00025˚C 238,000 149,000 71,000

55˚C 188,000 118,000 56,000

2' C1 15,00025˚C 238,000 149,000 71,000

55˚C 166,000 104,000 50,000

2' D1 20,00025˚C 186,000 117,000 56,000

55˚C 159,000 100,000 48,000

2' E1 24,00025˚C 238,000 149,000 71,000

55˚C 168,000 105,000 50,000

4' F1 29,00025˚C 238,000 149,000 71,000

55˚C 166,000 104,000 50,000

4' F2 36,00025˚C 238,000 149,000 71,000

55˚C 173,000 108,000 52,000

4' G1 40,00025˚C 186,000 117,000 56,000

55˚C 154,000 97,000 46,000

4' H1 45,00025˚C 238,000 149,000 71,000

55˚C 174,000 109,000 52,000

4' I1 63,00025˚C 216,000 135,000 65,000

50˚C 158,000 99,000 47,000

4' J1 78,00025˚C 219,000 136,000 62,000

50˚C 202,000 125,000 56,000

No Lens LAFG LAFN LACF

Nominal Lumen Code

Input Current

Wattage Lumens LPW Lumens LPW Lumens LPW Lumens LPW

2'

A1 0.18A 50w 9,002lm 181 8,424lm 169 8,201lm 165 8,180lm 165

B1 0.25A 69w 12,137lm 176 11,358lm 165 11,057lm 161 10,520lm 153

C1 0.32A 90w 15,275lm 170 14,294lm 159 13,915lm 155 13,845lm 154

D1 0.44A 123w 19,881lm 162 18,603lm 152 18,111lm 148 18,020lm 147

E1 0.5A 138w 23,941lm 173 22,403lm 162 21,810lm 158 21,701lm 157

4'

F1 0.65A 180w 29,281lm 163 27,400lm 152 26,675lm 148 27,678lm 154

F2 0.75A 209w 36,626lm 175 34,016lm 163 33,643lm 161 33,814lm 162

G1 0.89A 247w 40,150lm 162 37,571lm 152 36,576lm 148 35,096lm 142

H1 0.99A 273w 45,424lm 166 42,506lm 156 41,380lm 152 43,701lm 160

I1 1.35A 373w 63,466lm 170 58,860lm 158 57,620lm 155 57,892lm 155

J1 1.53A 425w 78,796lm 185 73,470lm 173 72,425lm 171 72,651lm 171

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

HARRIS LED HIGH BAY STAR LINE, GEN 1

HHSL1

Ordering InformationSeries Nominal

Lumen Code1Voltage Fixture Type CRI;

Color TempLens Options

Power Connection

Fixture Options

Factory Installed Control Options

Packaging Options

HHSL1= HARRIS LED High Bay Star Line, Gen 1

2'*A1= 9,000lm

B1= 12,000lm

C1= 15,000lm

D1= 20,000lm

E1= 24,000lm

4'*F1= 29,000lm

F2= 36,000lm

G1= 40,000lm

H1= 45,000lm

I1= 63,000lm15

J1= 78,000lm15

* J1 lumen package comes with 6 lenses standard. E1, H1 and I1 lumen packages come with 4 lenses standard, all other lumen packages come with 2 lenses standard

UNV= 120v-277v

347= 347v

480= 480v

FD= Factory Wired for Dimming Applications

ND= Factory Wired for ON/OFF Applications, Dimming capable if required

840= 80CRI; 4000K

850= 80CRI; 5000K

(Blank)= No Lens

LAFG= Lens, Acrylic Frosted General Distribution

LAFN= Lens, Acrylic Frosted 50º Narrow Aisle Distribution

LACF= Lens, Acrylic Clear 35º Focus Distribution

HW= Hardwire

PF= Platform10

ML= Mate N Lock9

06W= 6' Whip, White

11W= 11' Whip, White

06B= 6' Whip, Black

11B= 11' Whip, Black

(Blank)= No Option

TS= Additional 20 kV/10 kA Surge Protection

BB10= Battery Back Up, 10w8,13,15

BB20= Battery Back Up, 20w8,13,15

OE= Orange End Panels

(Blank)= No Control Options

Integrated in Fixture Body:

EN2= Enlighted Connected Lighting Sensor: Network Lighting Control Component, PIR Occupancy Sensor, Daylight Harvesting, High End Trim, Dimming Modes, Luminaire Level Lighting Control, Wireless Zones, Modified IEEE 802.15.4.1, BLE Radio, Temperature Sensor, Scene Control, Demand Response, Data Collection, BMS Integration, Cloud Access12,17

EN3= Enlighted IoT: All Features of EN2 - PLUS access to Apps: Space Management, Asset Tracking, and Contact Tracing Apps12,17

WSxxB= Wattstopper PIR Occupancy Sensor, HIGH/LOW/OFF, 0-10V Dimming, Switching Photosensor, IR Remote Programmable, 360°5, 6

VL40B= Vealite Keilton: PIR Occupancy Sensor, Photosensor, High and Low End Trim, 0-10V Dimming, IR Remote Programmable17,18

End Mounted:

MSL2= Leviton OSFHU: PIR Occupancy Sensor, ON/OFF, Manual Programmable5,9

MCxx= Leviton HB011: PIR Occupancy Sensor, Daylight Harvesting, 0-10V Dimmming Modes, Manual Prorgrammable5,6,11,17

WBxx= Wattstopper FSP-3x1: PIR Occupancy Sensor, Daylight Harvesting, High and Low End Trim, 0-10V Dimming, Bluetooth Mobile App Programmable5,6,17

(Blank)= Bulk Pack

-SP= Single Pack

Ordering Information Example (NOTE: No dashes or spaces unless noted below)

Series Nominal Lumen Code

Voltage Fixture Type CRI; Color Temp

Lens Options

Power Connection

Fixture Options

Factor Installed Control Options

Packaging Options

HHSL1 A1 UNV ND 850 LAFG HW TS MSL2 -SP

3

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

4

Accessories (Factory Installed)

Sensor(MSL2/MCxx)

Sensor(WBxx)

No Lens Option(E1 Shown)

Lumen Packages that Come with 2 Lenses Standard(A1/B1/C1/D1/F1/F2/G1)

C1 Shown

Photometrics Visit orionlighting.com to obtain all .IES files

E1 850 E1 850 LAFG E1 850 LAFN

Physical Information4

Nominal Lumen Code

Length Width Depth Weight

A1/B1/C1/D1/E1 23.75" 15.00" 3.16" 6.00-11.00lbs.

F1/F2/G1/H1 45.75" 15.00" 3.16" 11.00-17.00lbs.

I1 45.75" 17.20" 3.16" 13.00-19.50lbs.

J1 45.75" 23.73" 3.16" 17.00-26.00lbs.

Orange End Cap (OE)

Battery Back Up(BB)

Sensor(ENx)

Sensor(WSxxB)

E1 850 LACF

Ambient Operating Temperatures2,8

Nominal Lumen Code Standard Operating Range

A1/B1/C1/D1/E1/F1/F2/G1/H1 -20ºC to 55ºC (-4ºF to 131ºF)

I1/J1 -20ºC to 50ºC (-4ºF to 122ºF)

Lumen Package that Come with 6 Lenses Standard(J1)

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

5

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

Accessories (Field Installed)Suspended Mounting Options

ECAB19 19” Cables with Snap Hooks (2 Required per Fixture)

ECAB31 31” Cables with Snap Hooks (2 Required per Fixture)

HW-FC008 Hanging cable, Set of Two: Adjustable 180”, Loop, Y-Fit with Snap Hooks (1 Set per Fixture)

LED-HHSL-PMR01-KIT

Pendant Mounting Bracket Kit for UNV HHSL1 Style Fixtures, Galvanized Steel (Available for Hardwired (HW) models only)

LED-HHSL-PMR01-KIT-480

Pendant Mounting Bracket Kit for 347/480 HHSL1 Style Fixtures, Galvanized Steel (Available for Hardwired (HW) models only)

LED-HHSL-PMR01-HL-KIT

Pendant Mounting Bracket Kit for UNV I1/J1 HHSL1 Style Fixtures, Galvanized Steel (Available for Hardwired (HW) models only)

LED-HHSL-PMR01-HL-KIT-480

Pendant Mounting Bracket Kit for 347/480 I1/J1 HHSL1 Style Fixtures, Galvanized Steel (Available for Hardwired (HW) models only)

Rigid Mounting Option

H131SETRigid/Flush and Threaded Rod Mounting Bracket Set (Raw Galvanized Steel-also available in white, add -W to the end of the part number)

Battery Back Up Options8.15*

LSLH-UNV-BBxx-KIT Field Installed Battery Back Up Kit for LSLH and HHSL UNV HW (120v-277v hardwired) fixtures

LSLH-347-BBxx-KIT Field Installed Battery Back Up Kit for LSLH and HHSL 347 HW (347v hardwired) fixtures

LSLH-480-BBxx-KIT Field Installed Battery Back Up Kit for LSLH and HHSL 480 HW (480v hardwired) fixtures

*To order 10w battery back up kit, change"xx" to "10". To order 20w battery back up change "xx" to "20". Example: LSLH-UNV-BB10-KIT

Wireguard Options*16

LED-HHSL-WG01-KIT Field Installed Wireguard Kit for A1/B1/C1/D1/E1 2' Fixtures without an End Mounted Sensor, Bulk Pack

LED-HHSL-WG02-KIT Field Installed Wireguard Kit for F1/F2/G1/H1 4' Fixtures without an End Mounted Sensor, Bulk Pack

LED-HHSL-WG03-KIT Field Installed Wireguard Kit for A1/B1/C1/D1/E1 2' Fixtures with an End Mounted Sensor, Bulk Pack

LED-HHSL-WG04-KIT Field Installed Wireguard Kit for F1/F2/G1/H1 4' Fixtures with an End Mounted Sensor, Bulk Pack

*Add "-SP" at the end of the Wireguard Options order logic for Single Pack.

VL40 Remote Required for Commissioning

RM51 Vealite Keilton Sensor IR Remote Controller

End Mounted Sensor Options14 *

OEMS1300P9End Mounted On/Off Only Sensor, 120v-277v, Normal Temp/Dry, High Bay, Low Bay & Aisle Lenses, 4-Pin Platform Input, 4-Pin Platform Output

OEMS1330P9End Mounted On/Off Only Sensor, 120v-277v, Cold Temp/Damp, High Bay, Low Bay & Aisle Lenses, 4-Pin Platform Input, 4-Pin Output

OEMS1370P9End Mounted On/Off Only Sensor, 480v, Normal Temp/Dry, High Bay, Low Bay & Aisle Lenses, 5-Pin Platform Input, 5-Pin Platform Output

OEMS1360P

Plug 'N Play End Mounted Remote Programmable On/Dim/Off & Ambient Sensor, 120v-277v, Cold & Normal Temp, 20’-40’ Lens, 4-Pin Platform Input, 5-Pin Platform Output (Requires FSIR-100 Sensor Configuration Tool - Not Included)

OEMS1368P

Plug 'N Play End Mounted Remote Programmable On/Dim/Off & Ambient Sensor, 347v/480v, Cold & Normal Temp, 20’-40’ Lens, 5-Pin Platform Input, 5-Pin Platform Output (Requires FSIR-100 Sensor Configuration Tool - Not Included)

OEMS1380PPlug 'N Play End Mounted Bluetooth App Programmable On/Dim/Off & Ambient Sensor, 120v-277v, Cold & Normal Temp, 20’-40’ Lens, 4-Pin Platform Input, 5-Pin Platform Output

FSIR-100

Hand-Held Sensor Configuration Tool Required for Adjusting Default Factory Settings, Including Hi/Low/Off Modes and Sensitivity/Time Delay/Cut Off (Ordered Separately-To Be Used with OEMS1360P/OEMS1368P or embedded WS20/WS40)

*For more information on our OEMS1 style sensors, or additional sensor options, click here for Dimming Sensors and click here for Non-Dimming Sensors.

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

© 2017 Orion Energy Systems, Inc. All rights reserved. The Orion logo, ISON™, APOLLO®, HARRIS and InteLite® product names are registered trademarks of Orion Energy Systems. All other trademarks are the property of their respective owners.800.660.9340 | orionlighting.com

HHSL1

HARRIS LED HIGH BAY STAR LINE, GEN 1

1 For actual lumens, see performance table2 Ambient operating range when suspended 12" from the ceiling3 Actual performance may vary by up to ±10% of values listed; facility factors and fixture options can affect performance values4 Weight will vary based on option selection 5 For more information about these options go to our controls landing page6 "xx" in part number is a place holder for lens height of sensor. Either "20" or "40" can be included at end of part number to replace the "xx" placeholder7 Calculated hours based on TM-21 projections and components used at the time of testing. Warranty is not associated with Calculated Lumen Maintenance

8 Fixture with Battery Back Up cannot be installed in an environment where the ambient temperature falls below 32°F and also requires a Hardwire connection9 Feature/accessory option is only available with ND driver type unless ordered with an embedded dimming control10 Requires the purchase of a Platform power cord. Cord is not included with fixture purchase11 Not compatible with 480 (480v) fixture models12 ENx is limited to 0ºC (32ºF) environments13 Multiply 10w by the lumens per watt (LPW) of the fixture to calculate lumen output in emergency mode14 All Sensors come standard with a Raw Aluminum housing finish. Dark Gray and White housings are available. For Dark Gray add “-DG”. For a White Housing add “-WH” at the end of the sensor part number

Additional Specification Information15 I1 and J1 l lumen package is not available with a field installed battery back up option. The I1 and J1 lumen package comes with the battery back up installed internally within the driver channel16 I1 and J1 lumen package is not available with wireguard option17 Feature/accessory option is only available with FD driver type18 Require RM51 remote for commissioning and/or modifying settings. See accessories table.

Battery Back Up(LSLH-xxx-BBxx-KIT)

Fixture Wireguard16

(LED-HHSL-WG0x-KIT)Fixture Wireguard with End Mounted Sensor Wireguard16

(LED-HHSL-WG0x-KIT)

Accessories (Field Installed)

P-INT-XS-165 Rev. 211105

6