Upgrade G uide for New Patch of HG510a

Step 1: 1.1 Download the file “HG-510a.exe” from PTCL Website

Step 2:

2.1 Make sure th at HG-510 is connected properly with Computer. 2.2 Double click recently downloaded file, then patch upgrade process will start automatically..

Note: Your firewall may popup a window as following,

Please click “Unblock” button to let the tool run on your

computer.

2.3 During upgrade process, please DO NOT power off your HG510a

according to the warning information of the tool as below:

2.4 Please wait for a while until the following screen showing.

2.5 Then you can login the web page. The login user name/password is admin/admin. Please make sure the software release is V100R001B025SP01 PTCL as following.

2.6 If software is Upgraded then fine and you can surf internet, otherwise starting from above mentioned Step-2 try to upgrade again.