,Hella Catalogue

AUTOMOTIVE HEADLAMPS

www.hella.co.nz 113

100mm Halogen Headlamps with Mounting Frame

90mm Halogen FF-H7 Headlamps

1BL 007 834-047 Dipped Beam

1LL 008 369-271 Bi-Xenon H7 Headlamp Unit - LH

1LL 008 369-281 Bi-Xenon H7 Headlamp Unit - RH

1KL 007 834-067 Main Beam

1BL 008 193-017 Dipped Beam

1KO 008 191-027 Main Beam with Park Light

1KO 008 194-027Xenon Dipped Beam with gas discharge and ballast unit

1NL 007 834-057 Fog Lamp

1BL 007 834-037 Xenon Dipped Beam

130

218

150

30

74

ø6.5

ø100

ø124

85 151

85 118.4

DESCRIPTION Built in Headlamps. For buses and mobile homes with 24V operatingVoltage. Xenon or halogen headlamps with arched lens.

LIGHT APERTURE 100mm diameter.

BULBS TO SUIT C 2470.XN 4000.

ECE COMPLIANT E1 548-550.

SPARE PARTS 9GH 145 943-001 Rear Cap for 1KL.9HD 155 239-001 Rear Cap for 1BL, 1NL.

DESCRIPTION Mercedes Benz (E 220 CDI) - E500 W211. With flasher light, electronic headlamp leveller actuator, Xenon ballast, gas discharge bulb and pre-fitted 12V bulbs.

BULBS TO SUIT XN 4000 D2S.CA 1255 H7.W 125 Park.RY 1221 Indicator.

DESCRIPTION Built in Headlamps. H7 Dipped-beam headlamp. Lens with reflector bonded. Headlamp adjusters included.

LIGHT APERTURE 90mm diameter.

BULBS TO SUIT CA 2470.HL 244.XN 4000.

ECE COMPLIANT E1 917.

SPARE PART 9GH 152 654-007 Rear Cap.

BulbsIncl.

BulbsIncl.

Bulb Incl.

Bulb Incl.

24V Bulb Incl.

24V Bulb Incl.

24V Bulb Incl.

24V Bulb Incl.

24V Bulb Incl.

HID

HID

HA071/Hella Cat/Pg 112-113 05/06/2003 1:14 PM 13

BULB TO SUIT 12V (C1255).

3-SERIES (E30) 1/83-8/87

1L3 126 898-031 Dipped Beam LH

1L3 126 902-021 Dipped Beam RH

1K3 126 046-001 Main Beam LH

1K3 126 680-001 Main Beam RH

3-SERIES (E30) 9/88-3/97 Super DE

9BG 135 941-011 Dipped Beam LH

9BG 135 942-011 Dipped Beam RH

1K3 134 855-011 Main Beam LH

1K3 134 856-011 Main Beam RH

5-SERIES (E34) 9/88-3/97 Super DE 7-SERIES (E32) 9/88-5/94 Super DE

9BG 135 927-011 Dipped Beam LH

9BG 135 928-011 Dipped Beam RH

1K3 132 253-011 Main Beam LH

1K3 132 266-011 Main Beam RH

114

BMW HEADLAMPSHeadlamps and Inserts

BULBS TO SUIT 12V HB3 (CB1265), 12V HB4 (CC1255), 12V (W125), 12VH1 (C1255).

SPARE PARTS 9ES 145 251-005 Cover lens LH.9ES 145 252-005 Cover lens RH.

BULBS TO SUIT 12V (CA1255), 12V (RY1221).

3-Series (E36) Compact 4/94-8/00

1LJ 007 143-051 FF HB3/HB4 with electric headlamp leveller LH

1LJ 007 143-061 FF HB3/HB4 with electric headlamp leveller RH

1NB 006 270-051 FF H1 Fog Lamp LH

1NB 006 270-061 FF H1 Fog Lamp RH

1LL 008 053-591 DE-H7/FF-H7 with electric headlamp leveller LH

1LL 008 053-601 DE-H7/FF-H7 with electric headlamp leveller RH

5-Series (E39) Saloon 9/00>

BULB TO SUIT 12V (C1255).

5-Series (E34) 1/89-3/97

1NL 005 680-111 DE-H1 Fog Lamp LH

1NL 005 680-121 DE-H1 Fog Lamp RH

12V Bulb Incl.

12V BulbsIncl.

12V BulbsIncl.

12V Bulb Incl.

12V BulbsIncl.

12V BulbsIncl.

HA071/Hella Cat/Pg 114-115 05/06/2003 7:29 AM Page 114

www.hella.co.nz

ATTACHABLE HEADLAMPS - HEADLAMP ASSEMBLIES

115

DESCRIPTION A combination round main headlamp and indicator lamp in one housing.

BULBS TO SUIT 12V (XD1260/55). 12V (RY1221).24V (XD2475/70). 24V (RY2421)

DESCRIPTION Module 120 with H7 dipped-beam light, H3 driving-beam light andside light, with attached amber indicator lamp. Flasher lamp with onelens each toward front and rear. Black housing. Black glass-fibrereinforced lens-retaining rim with extending edge to protect lens.Universal bracket with M12 fixing screws. Type of protection: IPX9K.

SPARE PARTS 1LA 990 185-011 Light Unit.9EL 990 186-001 Lens for indicator lamp, front.9EL 990 186-101 Lens for indicator lamp, rear.

ACCESSORIES 8JD 008 151-051 Socket for AMP plug connector.

BULBS TO SUIT 12V (CA1255). 24V (CA2470).12V (YC1255). 24V (YC2470).12V (R1221). 24V (R2421).12V (HL124). 24V (HL244).

DESCRIPTION For quartz halogen or conventional sealed beams and inserts 178mm.Fully sealed steel cowl, complete with adjusting mechanism for verticaland horizontal alignment, sealing gasket, stainless steel retaining rim and3 pin wiring harness with separate park lamp connection. Ideal for truck,bus or body builders, suits Mercedes, Kenworth, Mack, White etc.

Universal Headlamp Assembly1016

DESCRIPTION Outer chrome rim to suit Part No. 1016.

Chrome Rim1017

DESCRIPTION For all 200 x 142mm rectangular headlamp units.Ideal for truck, bus or body builders.

Rectangular Headlamp Housing1024

1L3 996 160-127 Main Beam / Indicator LH

1L3 996 160-137 Main Beam / Indicator RH

Combination Headlamp / Front Direction Indicator / Front Position Lamp

DESCRIPTION Housing made of black impact and chemical resistant material. Suitable for all 146mm standard headlamp units.

MOUNTING Horizontal and vertical mounting.

BULBS TO SUIT Headlamp: 12V (XD1260/55).24V (XD2475/70).

Front position: 12V (HL124).24V (HL244).

Front direction indicator: 12V (R1221).24V (R2421).

SPARE PARTS 1055 Headlamp insert.9.1001.01 Lens - Indicator.

100112V Bulb

Incl.

1LA 993 975-041 H7/H3 External-Fitting Headlamp RH

1LA 993 975-031 H7/H3 External-Fitting Headlamp LH

1LA 993 975-071 H7/H3 External-Fitting Headlamp LH - 24 Volt

1LA 993 975-081 H7/H3 External-Fitting Headlamp RH - 24 Volt 212 101

165

150

41

91 75


116

ATTACHABLE HEADLAMPS - HEADLAMP ASSEMBLIESHeadlamps and Inserts

DESCRIPTION For most 165 x 100mm rectangular headlamp units. Chrome platedouter rim. Complete with adjusting mechanisms for vertical / horizontalalignment and wiring loom. Ideal for truck, bus or body builders.

SPARE PART 9.1025.07 Chrome plated outer rim.

Twin Rectangular Headlamp Housing1025

DESCRIPTION With sealing boot. This insert can be used in the high beam section ofa dual headlamp system.

BULBS TO SUIT Headlamp: 12V (C1255). 24V (C2470).

146mm Quartz Halogen Long Range Driving Insert1040

Quartz Halogen High / Low Beam Headlamp Assembly

DESCRIPTION Lamp unit dimensions 270 x 170mm complete with mounting frame andadjusting mechanisms for vertical / horizontal alignment. Fully enclosedhousing with removable rear sealing cap for bulb replacement access. Idealfor truck, bus or body builders.

MOUNTING Simple 4 point mounting.

BULBS TO SUIT Headlamp: 12V (XD1260/55). 24V (XD2475/70).


SPARE PARTS 9.1027.01 Lens.9.1027.02 Reflector.9.1027.03 Lens gasket.9.1027.04 Sealing cap.9.1027.05 Supporting frame.

102712V Bulb

Incl.

352320

190

195 190

410165 70

100 156

QUARTZ HALOGEN HEADLAMP INSERTS


www.hella.co.nz

QUARTZ HALOGEN HEADLAMP INSERTS

117

DESCRIPTION With sealing boot. This insert can be used in a high beam section of a dual headlamp system.


Note Earth terminal is a “Post” (bullet) type connection.

146mm Quartz Halogen High Beam Insert1053

165 x 100mm Quartz Halogen High Beam Insert

DESCRIPTION With sealing boot.


1041

165 x 100mm Quartz Halogen High / Low Beam Insert

DESCRIPTION With sealing boot.


1042


DESCRIPTION With front position lamp bulb holder and sealing boot


Front position: 12V (HL124). 24V (HL244).

1044


DESCRIPTION With front position lamp bulb holder and bulb HL124 (included) and sealing boot.



SPARE PART 13839700 Bulbholder.

1043


118

QUARTZ HALOGEN HEADLAMP INSERTSHeadlamps and Inserts

DESCRIPTION With front position lamp bulb holder and sealing boot. To suit dual headlamp system.



146mm Quartz Halogen Low Beam Insert1054

178mm Quartz Halogen High / Low Beam Insert

DESCRIPTION With front position lamp aperture and sealing boot.


Note Front position bulb holder not supplied. Where front position lamp is required, use Part No. 1058.

1056


DESCRIPTION With front position lamp bulb holder and bulb HL124 (included) andsealing boot. To suit dual headlamp system.



1055


DESCRIPTION With front position lamp bulb holder and bulb HL124 (included) and sealing boot.


Front position : 12V (HL124).24V (HL244).

1058


www.hella.co.nz

QUARTZ HALOGEN HEADLAMP CONVERSION KITS

119

178mm Quartz Halogen High / Low Beam Kit

DESCRIPTION High / low beam headlamp inserts with front position lamp aperture and sealing boot.

WATTAGE High beam 60W.Low beam 55W.

SUITS Single headlamp systems.


SPARE PART 1056 Headlamp insert.Note Front position bulb HL124 or HL244 and bulb holder not supplied.

Where front position lamp is required, use Part No. 1058.

5604

146mm Quartz Halogen High / Low Beam Kit

DESCRIPTION High / low beam headlamp inserts with front position lamp bulb holder and sealing boot.

WATTAGE High beam 60W.Low beam 55W.

SUITS Dual headlamp systems high / low beam.



SPARE PART 1055 Headlamp insert.

13839700 Bulbholder.

5611

12V Bulb Incl.

12V Bulb Incl.


120

SEALED BEAMSHeadlamps and Inserts

DESCRIPTION With front position lamp bulb holder and snap lock cable connection.

BULBS TO SUIT Position lamp: 12V (HL124).24V (HL244).

Sealed Beam Adaptor4972

SEALED BEAM ADAPTOR

HALOGEN SEALED BEAMS

Sealed Beams by Dimension

Voltage/ Page TradeWattage Description No. No.

114mm(4 1/2 INCH)

1081 12v 50w FLOOD Q/H 120 H7606

1082 12v 60w FLOOD 122 4466

1084 12v 30w SPOT 122 4405

1085 12v 35w FLOOD 123 4411

1086 12v 35w FOG 123 4415

1087 12v 30w SPOT 123 4416

1089 12v 100w SPOT-L/RANGE 123 4509

1092 24v 60w SPOT 123 13006

1098 12v 40/40w HIGH/LOW 124 4440X

165 x 100mm(6 1/2 x 4 INCH)

1066 12v 60/40w HIGH/LOW 121 4652LH

1067 12v 50w HIGH 121 4651

200 x 142mm(7 3/4 x 5 1/2 INCH)

1068 12v 65/55w HIGH/LOW 121 6052X

Voltage/ Page TradeWattage Description No. No.

146mm(5 3/4 INCH)

1077 12v 50w HIGH 122 5712

1078 12v 60w FLOOD 122 4478

1079 24v 60/40w HIGH/LOW 122 ASD13L

1080 24v 80/60w HIGH/LOW 122 4579

1083 24v 90w SPREAD Q/H 120 H4813

1094 12v 100w L/RANGE 124 4537-2

1096 24v 60w FLOOD 124 4578

1097 12v 35w FLOOD 124 4412

1099 24v 40W HIGH 124 ASD13H

178mm(7 INCH)

1060 24v 75/55w HIGH/LOW 121 4800

3 Contact Lugs

2 Screw Terminals

TRADE PART NO. H7606.

DESCRIPTION Floodlamp beam to suit construction and industrial machinery.

VOLTAGE 12V.

WATTAGE 50W.

114mm Halogen Floodlamp Beam1081

TRADE PART NO. H4813.

DESCRIPTION Driving lamp beam to suit construction and industrial machinery.

VOLTAGE 24V.

WATTAGE 90W (2 x 45W in series).Note Centre pin for location only.

146mm Halogen Driving Beam Lamp1083


www.hella.co.nz

CONVENTIONAL SEALED BEAMS

121

TRADE PART NO. 4800.

DESCRIPTION High / low beam.

VOLTAGE 24V.

WATTAGE High beam: 75W.Low beam: 55W.

178mm High / Low Beam1060

TRADE PART NO. 4652LH

DESCRIPTION High / low beam to suit dual headlamp systems

VOLTAGE 12V

WATTAGE High beam: 60WLow beam: 40W

165 x 100mm High / Low Beam1066


DESCRIPTION High beam to suit dual headlamp systems.

VOLTAGE 12V.

WATTAGE 50W.

165 x 100mm High Beam1067

3 Contact Lugs

2 Contact Lugs

3 Contact Lugs

3 Contact LugsTRADE PART NO. 6052LH, 6052X.

DESCRIPTION High / low beam.

VOLTAGE 12V.


200 x 142mm High / Low Beam1068


122

CONVENTIONAL SEALED BEAMSHeadlamps and Inserts

TRADE PART NO. 4001, 5001, 5712.

DESCRIPTION High beam to suit dual headlamp systems.

VOLTAGE 12V.

WATTAGE 50W.

146mm High Beam1077



VOLTAGE 12V.

WATTAGE 60W.

146mm Floodlamp Beam1078

TRADE PART NO. ASD13L.

DESCRIPTION High / low beam to suit dual headlamp systems on Japanesecommercial vehicles.

VOLTAGE 24V.




DESCRIPTION High / low beam to suit construction and industrial machinery.

VOLTAGE 24V.


Note Not for road use as light pattern is for right-hand side traffic.




VOLTAGE 12V.

WATTAGE 60W.



DESCRIPTION Spotlamp beam.

VOLTAGE 12V.

WATTAGE 30W.

114mm Spotlamp Beam1084

2 Contact Lugs

3 Contact Lugs

3 Contact Lugs

2 Contact Lugs

2 Screw Terminals

2 Screw Terminals


www.hella.co.nz

CONVENTIONAL SEALED BEAMS

123


DESCRIPTION Floodlamp beam to suit tractor applications.

VOLTAGE 12V.

WATTAGE 35W.



DESCRIPTION Foglamp beam to suit automotive applications.

VOLTAGE 12V.

WATTAGE 35W.

114mm Foglamp Beam1086


DESCRIPTION Spotlamp beam to suit handheld spotlamp applications.

VOLTAGE 12V.

WATTAGE 30W.



DESCRIPTION Spotlamp beam to suit hand held spotlamp. P/No 1520.

VOLTAGE 12V.

WATTAGE 100W.

114mm Spotlamp / Long Range Beam1089


DESCRIPTION Spotlamp beam to suit hand held spotlamp. P/No 1525.

VOLTAGE 24V.

WATTAGE 60W.


2 Screw Terminals

2 Screw Terminals

2 Screw Terminals

2 Screw Terminals

2 Screw Terminals


124

CONVENTIONAL SEALED BEAMSHeadlamps and Inserts


DESCRIPTION Searchlamp work lamp beam.

VOLTAGE 12V.

WATTAGE 100W.

146mm Long Range Beam1094



VOLTAGE 24V.

WATTAGE 60W.




VOLTAGE 12V.

WATTAGE 35W.


TRADE PART NO. 4440X.

DESCRIPTION High / low beam to suit tractor and automotive applications.

VOLTAGE 12V.



TRADE PART NO. ASD13H.

DESCRIPTION High beam to suit dual head lamp system on Japanese commercial vehicles.

VOLTAGE 24V.

WATTAGE 55W.

146mm High Beam1099

2 Screw Terminals

3 Contact Lugs

2 Contact Lugs

2 Contact Lugs

2 Screw Terminals

HA071/Hella Cat/Pg 124 05/06/2003 7:37 AM 4

HELLA BEAMSETTER

SEG 700L Hella Beamsetter

www.hella.co.nz 197

SPARE PARTS 9EV 861 038-001 Window.9ST 861 074-001 Locking Knob.9XS 854 769-001 Wheel Set.9XS 861 736-001 Rail Kit 1.5 metres.

ALSO AVAILABLE Hella’s Beamsetter calibration service. Designed to calibrate your Beamsetter in line with the manufacturer’s standard and to comply withindustry ISO Certification.

SEG 700DLX Hella Beamsetter

DESCRIPTION An updated version which has new technical advantages that set it apart from other headlight aimers.

FEATURES 1. Digital indication of illuminance.2. Laser alignment.3. Height adjustment lever complete with spirit level for

uneven floors.

SPARE PARTS 8.0002.01 Window.8.0002.03 Voltmeter.8.0002.06 Lightmeter complete with photo-diode.

Calibration Service available fromHella-New Zealand Limited.

The Hella Beamsetter is a precision workshop instrument designed to accurately checkvehicle headlamps. It was developed especially for use in professional workshops and vehicle testing stations.

The Hella Beamsetter provides high accuracy in lighting checks and is also able to test thelatest technology headlamps.

The Beamsetter box, the heart of the unit, is constructed of impact-resistant, corrosionproof plastic which even withstands the aggressive fluids used in workshops.

Its functional design allows quick, precise and simple headlamp adjustment.

FEATURES INCLUDE

• Wide band sight aligner.• Combination volt and light output meter.• Sturdy base.• Large viewing screen.• Easy height adjustment.• Spare parts availability.

SPARE PARTS FOR MARK III BEAMSETTER

1. 2. 3.

HA071/Hella Cat/Pg 196-197 05/06/2003 1:28 PM Page 197

,Hella Catalogue

Documents

Transcript of ,Hella Catalogue