Heavy-Duty Slide OptionsAccuride offers a comprehensive range of heavy-duty slides specially designed for wide-drawer applications in commercial environments.

3600 Series

Model 9301EEnhanced 9300 Series

7950 Non-disconnect

7957 Handed lever disconnect

METAL

.75"[19.1]

.75"[19.1]

2.79"[70.8]

2.79"[70.8]

.75[19.1]

2.09[53.1]

Model 3600With a load rating up to 273 lbs. [124 kg], this slide works well in workstations, machinery, and mechanical devices.

• Full extension. • Non-disconnect. • Hold-in detent. • Even lengths 12"–28" [305–711 mm]. • Clear zinc finish.

Model 3601This product offers heavy-duty performance and over travel for utility and industrial truck bodies, machine tools, and mechanical devices.

• Load rating up to 255 lbs. [116 kg]. • 1" [25 mm] over travel. • Non-disconnect. • Hold-in detent. • Even lengths 12"–28" [305–711 mm]. • Clear zinc finish.

Model 3607Lock out and lever disconnect benefit applications such as machinery where component assemblies are pulled out for service and maintenance.

• Load rating up to 273 lbs. [124 kg]. • Full extension. • Lever disconnect. • Lock-out feature to hold conveyances in

an open position. • Even lengths 12"–28" [305–711 mm]. • Clear zinc finish.

Models 7950 & 7957An intermediate load rating choice for heavier storage applications.

• Full extension • Dual mounting:

• Side mount load capacity up to 350 lbs. [159 kg]; • Flat mount load capacity up to 150 lbs. [68 kg].

• Accommodates drawers up to 42" wide [1067 mm] • Clear zinc (C) finish • Even lengths 12"–36" [305–914 mm]

Heavy-Duty Slide Options

Model 3600

Model 7950 Non-disconnect

Model 7957Handed lever

disconnect

3600

7950/7957

Heavy-Duty Slide Options

Model 9301E Model 9307E/9308E

Model 9301E

Model 9307ELock-out

Model 9308ELock-in & Lock-out

Model 9301E is designed for use in a variety of storage applications including vehicular storage, or other wider, heavier drawers. Platform bracket kits provide six additional mounting configurations, offering installers a broader range of application solutions.

Enhanced 9300E Series Through proactive enhancements, the 9300E series slide is a far more robust product with less migration, longer life, fewer field failures, less noise, and a load rating up to 600 lbs. These slide improvements make the 9300E series slide superior to all other slides in its class.

Heavy-Duty with a lock-out for applications where secure access to drawers and trays adds a measure of safety.

Lock-in and lock-out features to ensure drawers stay securely closed during transit in applications such as utility vehicles.

9300E Shared Features • Full extension • .75" [19.1 mm] side space • Non-disconnect • Even lengths 10"–36", 40", 42", 44", 48", 54", 60"

[254–914, 1016, 1067, 1118, 1219, 1372, 1524 mm]** • Clear zinc finish

Load Ratings• Moderate usage: 600 lbs./pair Drawers

up to 24" wide*• Frequent usage: 480 lbs./pair Drawers

up to 42" wide**• Mobile applications: 360 lbs./pair

Drawers up to 32" wide*• Flat mount: 180 lbs./pair

Drawers up to 32" wide*• Bracket-mount applications:

Drawers up to 22" wide: 600 lbs./pair Drawers up to 42" wide: 420 lbs./pair

* Lengths 10"–36". For load ratings on longer lengths, consult product technical sheet. Load ratings based on 10,000 cycle test.

** Lengths 10"–36". For load ratings on longer lengths, consult product technical sheet. Load ratings based on 75,000 cycle test.

** Lengths vary by model number. Refer to the tech sheet

Authorized Distributor

Heavy-Duty Slide Options

Model 9328EPocket & Bayonet MountingLock-in & Lock-out

Model 9322EPocket & Bayonet MountingNon-locking companion slide

Heavy-Duty load rating with lock-in/lock-out to keep drawers securly in place during access or transit.

Model 9322 is unhanded and can be used on either the left or right hand side of the unit.

Pocket Bayonet

Pocket & Bayonet Mounting – Toolless InstallationThese products have a standardized bayonet/pocket installation system that simplifies and speeds up slide integration. Installers simply snap the slides into position, without the need for screws, washers, or lock nuts. The slide is secured in position with locking tabs or barbs.

Accuride printed materials are;Printed with soy based inks. Printed on paper that contains recycled materials and conforms to the latest sustainable arboriculture guidelines.

12311 Shoemaker Avenue Santa Fe Springs, CA 90670 phone: 562.903.0200 fax: 562.903.0208 www.accuride.com

© 2017 Accuride International Inc. 2314-R1-0417-2M-ALA

ENHANCED 9300 SLIDE FAMILY

9308E

9328E

9322E

9301E

9307E

9308E

METAL

9300E Shared Features • Platform bracket kits for increased application flexibility

• Full extension

• .75" [19.1 mm] side space

• Non-disconnect

• Even lengths 10"–36", 40", 42", 44", 48", 54", 60"[254–914, 1016, 1067, 1118, 1219, 1372, 1524 mm]**

• Clear zinc finish

9300E SLIDE SERIES

Model 9301E

Model 9307ELock-out

Model 9308ELock-in & Lock-out

Model 9301E is designed for use in a variety of storage applications including large pantry pull-outs, vehicular storage, or other wider, heavier drawers. Platform bracket kits provide six additional mounting configurations, offering installers a broader range of application solutions.

** Lengths vary by model number. Refer to the tech sheet

The 9300E slide family has been enhanced to deliver a payload of up to 600 lbs., reduced migration, and smoother and quieter travel. These enhancements not only make this slide better than before; it’s the best in its class.

Heavy-Duty slide with premium movement, and stronger lock-out functionality to keep drawers and workstations secured in an open position for an extended period of time.

Heavy-duty slide with stronger lock-in feature to ensure drawer stays closed during transit in utility and emergency vehicles. Lock-out feature holds drawers and trays open securely for an extended period of time.

Load Ratings• Moderate usage: 600 lbs./pair Drawers

up to 24" wide*

• Frequent usage: 480 lbs./pair Drawers up to 42" wide**

• Mobile applications: 360 lbs./pair Drawers up to 32" wide*

• Flat mount: 180 lbs./pairDrawers up to 32" wide**

• Bracket-mount applications:Drawers up to 22" wide: 600 lbs./pair Drawers up to 42" wide: 420 lbs./pair

• Lengths 10"–36". For load ratings on longer lengths, consult product technical sheet. Load ratings based on 10,000 cycle test.

** Lengths 10"–36". For load ratings on longer lengths, consult product technical sheet. Load ratings based on 75,000 cycle test.

9300E SLIDE SERIES

Model 9328E – Toolless InstallationPocket & Bayonet MountingLock-in & Lock-out

Model 9322E – Toolless InstallationPocket & Bayonet MountingNon-locking companion slide

This heavy-duty slide now has stronger lock-in and lock-out features that keep drawers secured in open and closed positions. The pocket & bayonet mounting make installation simpler.

This unhanded heavy-duty slide is equipped with a pocket and bayonet mounting system to make installation easy.

Pocket Bayonet

Pocket & Bayonet Mounting These products have a standardized bayonet/pocket installation system that simplifies and speeds up slide integration. Installers simply snap the slides into position, without the need for screws, washers, or lock nuts. The slide is secured in position with locking tabs or barbs.

© 2017 Accuride International Inc. 2730-R1-0417-2M-ALA

12311 Shoemaker AvenueSanta Fe Springs, CA 90670(562) 903-0200(562) 903-0208 Faxwww.accuride.comFollow us for the latest product releases, events, and more!

Authorized Distributor

Model 9308-E5Special Packaging

Combination includes one standard 9301E and one right-handed 9308E Front Latch.

Front LatchFront latch releases and secures drawers in an open position for extended access. This latch can be used on either side of the cabinet or both slides on the drawer.

9300E SLIDE SERIES

Accuride printed materials are:• Printed with soy based inks. • Printed on paper that contains recycled materials and

conforms to the latest sustainable arboriculture guidelines.

MODEL 9322E Non-Locking Companion

Pocket and Bayonet Mount

MODEL 9328E Lock-in & Lock-out with Front Release

Pocket and Bayonet Mount

Bright electro-zinc (C) plating•

Even lengths 10"–36" and 40", 42", 48" and 60" [254–914, 1016, 1067, 1219, 1524 mm]

Full extension

3.00" [76.2 mm]

360 lbs. [163.68 kg.]

FinishLengths

TravelHeight

Load

* Load rating based on an 22" slide in a 24" wide drawer cycled 10,000 times. • RoHS compliant

APPLICATIONS: Designed for use in a variety of heavy-dutymetal applications for wider drawers used in truck bodies and emergency vehicles. This product is covered by U.S. and various foreign patents issued and/or pending.

.75" (+.030, -.000) [19 mm (+.76, -.00)]

Maximum 32" wide

Side; bayonet and pocket

Not included. Recommended: Drawer: #8 pan head self-tapping screw Cabinet: #10 pan head self-tapping screw

Silenced for quiet operation. 9328E offers lock-in and lock-out with front release.

Side SpaceDrawer Width

MountingHardware

Features

Part number

Slide Length

Travel A B Part Number

Slide Length

Travel A B Part Number

Slide Length

Travel A B

9322-E10 9328-E10

10.00 [254.0]

10.00 [254.0]

5.50 [139.7]

5.50 [139.7]

9322-E22 9328-E22

22.00 [558.8]

22.00 [558.8]

15.50 [393.7]

12.50 [317.5]

9322-E34 9328-E34

34.00 [863.6]

34.00 [863.6]

25.50 [647.7]

22.50 [571.5]

9322-E12 9328-E2

12.00 [304.8]

12.00 [304.8]

7.50 [190.5]

6.00 [152.4]

9322-E24 9328-E24

24.00 [609.6]

24.00 [609.6]

15.50 [393.7]

12.50 [317.5]

9322-E36 9328-E36

36.00 [914.4]

36.00 [914.4]

30.50 [774.7]

27.50 698.5]

9322-E14 9328-E14

14.00 [355.6]

14.00 [355.6]

9.50 [241.3]

8.00 [203.2]

9322-E26 9328-E26

26.00 [660.4]

26.00 [660.4]

15.50 [393.7]

15.50 [393.7]

9322-E40 9328-E40

40.00 [1016.0]

40.00 [1016.0]

30.50 [774.7]

27.50 698.5]

9322-E16 9328-E16

16.00 [406.4]

16.00 [406.4]

12.50 [317.5]

10.00 [254.0]

9322-E28 9328-E28

28.00 [711.2]

28.00 [711.2]

15.50 [393.7]

15.50 [393.7]

9322-E42 9328-E42

42.00 [1066.8]

42.00 [1066.8]

30.50 [774.7]

27.50 698.5]

9322-E18 9328-E18

18.00 [457.2]

18.00 [457.2]

12.50 [317.5]

10.50 [266.7]

9322-E30 9328-E30

30.00 [762.0]

30.00 [762.0]

18.50 [469.9]

17.50 [444.5]

9322-E48 9328-E48

48.00 [1219.2]

48.00 [1219.2]

30.50 [774.7]

27.50 698.5]

9322-E20 9328-E20

20.00 [508.0]

20.00 [508.0]

15.50 [393.7]

10.50 [266.7]

9322-E32 9328-E32

32.00 [812.8]

32.00 [812.8]

20.50 [520.7]

17.50 [444.5]

9322-E60 9328-E60

60.00 [1524.0]

60.00 [1524.0]

40.50 [1028.7]

37.50 [952.5]

Closed position flush ± .05 [1.3]

View DView C

Inchesmm

* For D and E dimensions see page 2.

Travel = Slide Length ± .130 [3.3]

Close position �ush ± .05 [1.3]

Slide Length

Slide LengthA

C

.50 [12.7].740 ± .005 [18.7 ± .1] TYP.

ø .160 [ø 4.0] in. �at distortion o.k.due to tab forming

.50 [12.7].740 ± .005 [18.7 ± .1] TYP.

ø .160 [ø 4.0] in �at distortion o.k.due to tab forming

C

A

.080 ± .005

[2.0 ± .1] GAP (2X)

.550 [13.9](2X)

.135 [3.4]Lead in (2X0

Travel = Slide Length ± .130 [3.3]

B 1.75[44.4]2.50 [63.5]

4.00 [101.6]

.375[9.5](2X)

.375 X .500[9.5 X 12.7Cut - out

.180 X .210[4.6 X 5.3]

2.50 [63.5]4.00 [101.6]

B

.375 [9.5]2(X)

.375 X .500[9.5 X 12.7]

Cut - out

.180 X .210[4.6 X 5.3]

1.09[27.6]

.080 + .005[2.0 ± .1] GAP (2X)

.820 [20.8]Flat (2X)

.460 [11.6].080 [2.0]

.250 [6.3]

3.0076.2

.080 [2.0] GAP (2X) REF.

.75 [19]

.80 [2.0] GAP (2X) REF.

.080 [2.0].460[11.6]

3.00[76.2]

.250[6.3]

.080 [2.0] GAP (2X) REF.

.75 [19]

.80 [2.0] GAP (2X) REF.

9322E

9328E

Drawer Cut-Out Recommendation

Cabinet Cut-Out Recommendation See figure 1 for hat section cut-out details.

Same cut-out details apply to locking and non-locking slide.

Front and rear hat sections are identical.

The .200 dia. round hole is used for optional #10 fixing screw. See installation details for proper use of this feature.

Attach the hat sections to the cabinet sidewall using the pitch pattern recommended in figure 2.

For A dimensions, see table on front page.

The vertical cut-out at the front of the rear hat section accepts the rear cabinet member tab (see figure 3).

NOTE: Minimum recommended material thickness for hat section is .060" [1.52mm] or 16 gauge.

Mounting Slide to Cabinet1. Insert the cabinet member rear bayonet tab into the rear hat section cut-out (see figure 3).

2. Lower the slide until the front bayonet tab engages the front cut-out.

3. Insert the front tab into the trapezoidal cut-out. Push firmly downward until the tab snaps into place and the retention lug is engaged (see figure 3).

4. The retention lug prevents the cabinet member from lifting and disengaging from the cabinet.

5. When desired, an optional #10 self-tapping screw (customer provided) can be used to fix the slide firmly in the cabinet. Run the screw from the hat section hole into the front bayonet tab.

6. Repeat procedure on opposite side of cabinet for the companion slide.

7. The companion slide can be a locking or non-locking slide. Same installation procedure applies.

Cabinet Member Installation Instructions

Figure 1

.88 [22.3]

.250 [6.4]

.050 [1.3] .740 [18.7]

A + .060 [1.5]

.600 [15.2]

Cabinet Front

Front Hat Section

1.75 [44.4]

+ setback

Rear Hat Section

A + .060 [1.5]

RearFront

Front Hat Section

DE

.06 X 45°[1.5 X 45°]

(4X)

1.42[36.0]

.18 [4.6]

.36 [9.1].36 [9.1]

.20 [5.1] .45[11.4]

4.00 [ 101.6]

Figure 4

.140 Dia.[ 3.6]

Drawer Cut-Out Recommendations See figure 4 for drawer cut-out details.

Same cut-out details apply for locking and non-locking slides.

The .140 dia. round hole is used for optional #8 fixing screw. See installation details for proper use of this feature.

For B dimension (figure 5) see table on front page. For optimum slide performance, it is recommended that the slide centerline be located at the centerline of the drawer side or slightly toward the plane of the drawer pull.

Cut-out recommendation is based on 14 gauge material.

If a thinner material is used, adjustment to the cut-outs must be made to ensure a proper fit. Refer to the table below for the recommended modifications.

Material Gauge

Material Thickness D E

14 .075[1.90]

.855[21.72]

.815[20.70]

16 .060[1.52]

.865[21.97]

.825[20.96]

Figure 3

Figure 2

Reverse view

2

Cabinet cut-out recommendation

.200 [ 5.1]

.375 [9.5]

.700 [17.8]

.753 19.13

.745 18.92

.45 [11.4]

.90 [22.9] .20 [5.1].65

[1.6]

B

Lug Height

The locking slide is model 9328E. The non-locking companions slide is model 9322E. Both slides are handed.

The locking slide can be used on the right hand side, left hand side, or both sides of the unit.

After the length, specify L for left hand and R for right hand. See below for the various left and right locking and non-locking combinations.

Left Hand Locking System: 9328-EXX-L & 9322-EXX-R Right Hand Locking System: 9322-EXX-L & 9328-EXX-R Left & Right Hand Locking: 9328-EXX-L & 9328-EXX-R Left & Right Hand Non-Locking: 9322-EXX-L & 9322-EXX-R (XX designates slide length)

Complete your slide order by specifying the following:

Model 9328E Locking Slide 100 Each C 9328 -E16 -L

Total Required Slides Slide Finish Locking Model Number Slide Length Left Hand Slide

Model 9322E Non-Locking Slide 100 Each C 9322 -E16 -R

Total Required Slides Slide Finish Companion Model Number Slide Length Right Hand Slide

Typical drawer cut-out

Figure 5

.625[15.9]

Slide

CL

"B"

Detail ARetention Lug

.180[4.6]

.36[9.1]

.065[1.7]

4.00 [101.6]

1. Using recommended placement of drawer bayonets (figure 5), extend both right and left hand slide drawer members. See Figure 6.

2. Position rear drawer tabs into both rear slide pockets. Guide front tabs into front pockets and push firmly into place making sure retention lug snaps into cut-out on slide drawer member. See Figure 6.

3. The drawer retention lug will adequately protect the drawer from lifting and disengaging from the slide.

4. When desired, an optional #8 self-tapping screw (customer provided) can be used through the front mounting pocket to fix the drawer firmly in place.

Mounting Slide to Drawer

Figure 6

Drawer Body

A

Slides are available in bulk (P) packaging only. Locking slides and non-locking companion slides are ordered and packaged separately.

Models 9328E and 9322E:

Lengths 10"–20" 8 each per box Lengths 22"–36" 4 each per box Lengths 40"–60" 2 each per box

Slide members: Cold rolled steel

Ball bearings: Carburized steel

RoHS compliant

Note: Specifications, materials, prices, terms, and delivery are subject to change without notice.

Slide Ordering Instructions

Packaging

Specifications

Copyright © 2009 Accuride International Inc. 3700-9475(1126)-MK104-R2-0317For the most current technical information visit www.accuride.com

ACCURIDE INTERNATIONAL INC.12311 Shoemaker Avenue Santa Fe Springs, CA 90670

TEL (562) 903-0200FAX (562) 903-0208www.accuride.com

Manufacturing, Engineering, and SalesUnited States • Germany • Japan • Mexico • United Kingdom • China

3