HEAVY-DUTY DIESEL EMISSIONS CONTROL SYMPOSIUM · Heavy-Duty Diesel Emissions Control Symposium |...

sae.org/events/hddec/

HEAVY-DUTY DIESEL EMISSIONS CONTROL SYMPOSIUMEvent Guide16–17 October 2018 | Gothenburg, Sweden

hddec18.org

Heavy-Duty Diesel Emissions Control Symposium | Event Guide 3

TABLE OF CONTENTS

General Info 4 Networking Opportunities 5Technical Tour 7Programme 8Training Courses 11Sponsors & Exhibitors 13

ORGANISING COMMITTEE

SAE International would like to thank the Organising Committee for their support and dedication.

David Bergeal, JOHNSON MATTHEY, Diesel Applications Manager – Europe

Stefan Fischer, NGK EUROPE GmbH, Vice President

Nitin Patel, VOLVO, Director

Adolf Schaefer-Sindlinger, NGK EUROPE, Senior Technical Manager HCV & NRMM Engineering

Gudmund Smedler, JOHNSON MATTHEY, Global Key Account Director

Guy Tremayne, JOHNSON MATTHEY, Marketing & Customer Sustainability Manager

EMERGENCY PROCEDURES

During the event, attendees should follow the emergency guidelines. Based on the location of the incident, report emergencies to the nearest venue or SAE International representative or report to the registration desk.

Should a catastrophic event occur, attendees should follow the safety and security instructions issued by the facility at the time of the event. This includes listening for instructions provided through the public address system and following posted evacuation routes if required.

CONSENT TO USE OF IMAGESPlease note that photographs and videos of event activities and attendees, taken by or on behalf of SAE International, shall be property of SAE International. By registering for an SAE International event, you consent to the use of any photograph or video in which you appear, without notice or compensation to you.


GENERAL INFO

Exhibition HoursTuesday, 16 October 10:30 – 19:00Wednesday, 17 October08:30 – 15:00

Registration HoursMonday, 15 October13:00 – 17:00Tuesday, 16 October07:30 – 18:00Wednesday, 17 October08:00 – 15:00

OPERATION HOURS

Heavy-Duty Diesel Emissions Control Symposium | Event Guide 4 Heavy-Duty Diesel Emissions Control Symposium | Event Guide 5

NETWORKING OPPORTUNITIES

Networking Breaks Tuesday, 16 October 10:30 – 11:00 Tuesday, 16 October15:30 – 16:00Sponsored by

Wednesday, 17 October10:00 – 10:30 Sponsored by

Wednesday, 17 October14:30 – 15:00

Networking LunchesTuesday, 16 October12:30 – 14:00Wednesday, 17 October11:30 – 13:00

Networking Reception

Tuesday, 16 October17:30 – 19:00Sponsored by

Supported by

Sponsored by

Wi-Fi Login Details

To join the Wi-Fi please select the "Quality Guest" network and you will be connected automatically.


Volvo Museum Monday, 15 October | 14:00 - 15:30

Join a guided tour through Volvo’s history Welcome to a world of iconic car models, groundbreaking innovations and imaginative prototypes. At Volvo Museum your guide will show you Volvo’s history and heritage, all the way from the start in 1927. Our collection encompasses a wide range of passenger cars, buses and heavy trucks as well as marine engines and construction equipment. Apart from the products at display, we’ve also built up a comprehensive archive of historical documents and images, providing a unique view into the story of what became one of Sweden’s most successful companies.

Volvo PE Engine Lab Monday, 15 October | 14:00 - 15:00

The laboratory is closed for external visitors due to security and heavy work load. Only special invited visitors like this conference or VIP customers are invited for guide tours. Therefore, don't miss the opportunity to be amongst the selected few that will have the opportunity to visit the Volvo Engine Lab.

Meeting Point: Hotel LobbyDeparture: 13:40Buses will be leaving the venue 20 minutes prior to the tour starting timeLanguage: EnglishRegistration Fee: €25 + VAT

Meeting Point: Hotel LobbyDeparture: 13:40Buses will be leaving the venue 20 minutes prior to the tour starting timeLanguage: EnglishRegistration Fee: €25 + VAT

TECHNICAL TOURS * Additional costs apply

If you wish to attend any of these tours, please do come and see us at the registration desk. Please note that registration is subject to availability.


PROGRAMME TUESDAY, 16 OCTOBER

07:30 - 18:00 REGISTRATION

08:45 – 09:00 Welcome and Introduction – Richard Polinski, SAE International

Moderator: Cecile Favre, AECC

09:00 – 09:30Keynote: Latest Developments on Heavy-Duty Vehicle CO2 and Fuel Efficiency Standards Around the World Rachel L. Muncrief, International Council On Clean Transport

09:30 – 10:00Introduction of Cold Engine Start to the Provisions of EURO VI Emissions Testing by Means of PEMS Bart Thedinga, European Commission

10:00 – 10:30Trends in HD Regulations and Technology Tim Johnson, Corning Inc. (retired)

10:30 – 11:00 Networking Break with Exhibits Sponsored by Umicore AG & Co. KG

How Companies are Developing Technologies to Meet in Service Conformity Moderator: Gudmund Smedler, Johnson Matthey

11:00 – 11:30New Challenges on EuVI Filter Technologies with Introduction of PN PEMS in ISC Testing Martin Petersson, Volvo Group Trucks Technology

11:30 – 12:00New Exhaust Aftertreatment Technology and Powertrain Integration to Enhance Real Driving Emissions and Customer Value Magnus Anders Nilsson, Scania CV AB

12:00 – 12:30Alternative Fuels Contribution to Current and Future CO2 Emissions Targets Per Hanarp, Volvo Group Trucks Technology

12:30 – 14:00 Networking Lunch with Exhibits

14:00 – 14:30Panel: Legislation & In Service Conformity Moderator: Cecile Favre, AECC Panelists: Tim Johnson & Rachel Muncrief

Emerging MarketsModerator: David Bergeal

14:30 – 15:00Use of ECU Data for Calculation of PEMS Results Qiang Zhan, Weichai

15:00 – 15:30Challenges in Indian Commercial Vehicle Engine and After Treatment for BSVI Emission Norms by 2020Sachin Agrawal, VE Commercial Vehicles, Ltd.

Theater for all sessions – Foyer for Networking breaks and lunches


PROGRAMME TUESDAY, 16 OCTOBER

15:30 – 16:00 Networking Break with Exhibits Sponsored by Umicore AG & Co. KG

Engine Developments & Control Strategies Moderator: Nitin Patel, Volvo

16:00 – 16:30SCR Control Strategies with Multiple Reduction Devices for Lowest NOx Emissions Mario de Monte, AVL LIST GmbH

16:30 – 17:00Technology Approaches for Meeting Future Emission Requirements for Commercial Vehicles Vadim Strats, IAV GmbH

17:00 – 17:30A System View of Interactions Between Diesel Engine and Aftertreatment: Factors Impacting Fuel Efficiency and Emissions Danan Dou, John Deere Product Engineering Center

17:30 – 19:00 Networking Reception with Exhibits

Sponsored by: Johnson Matthey, NGK, Volvo With the support of the City of Gothenburg

WEDNESDAY, 17 OCTOBER

08:00 – 15:00 REGISTRATION

08:45 – 09:00 Welcome and Announcements – Richard Polinski, SAE International

Catalyst & Substrate Developments – On & Off Road Moderator: Rachel Muncrief, ICCT

09:00 – 09:30High Performance Heavy Duty Catalysts for Global Challenges beyond 2020 Andrew Newman, Johnson Matthey PLC

09:30 – 10:00Future Emission Legislation – A Challenge for DPF Development and Applications Adolf Schaefer-Sindlinger, NGK Europe GmbH


WEDNESDAY, 17 OCTOBER

10:00 – 10:30 Networking Break with Exhibits Sponsored by Corning

10:30 – 11:00Advancements in SCR to Achieve Ultra-Low Nox Emissions in Heavy Duty Applications Andreas Geisselmann, Umicore AG & Co. KG

11:00 – 11:30Meeting Future Heavy Duty On-road Emission Legislations - Components and System Development Martin Kalwei, BASF Corp.

11:30 – 13:00 Networking Lunch with Exhibits

Powertrain Strategies and Future Developments Moderator: Claus Vogt, NGK Europe GmbH

13:00 – 13:30What Does the Future Hold for the Global Commercial Vehicle Market? Andy Walker, Johnson Matthey Plc.

13:30 – 14:00Volvo Trucks’ First All-Electric Truck Ola Styrenius, AB Volvo

14:00 – 14:30Panel: Powertrain Strategies and Future DevelopmentsModerator: Claus Vogt, NGK Europe GmbH Panelists: Andy Walker & Ola Styrenius

14:30 – 15:00 Networking Break with Exhibits

Alternative Fuel and PowertrainsModerator: Adolf Schaefer-Sindlinger, NGK Europe GmbH

15:00 – 15:30Automotive Fuel Cells in Heavy-Duty Applications Thomas Tingelöf, PowerCell Sweden AB

15:30 – 16:00Renewable Diesel Production Based on Forest Residues Using Existing Refinery Structures Henrik Rådberg, Preem AB

16:00 – 16:30Natural Gas as Fuel in HD Vehicles Magnus Fröberg, Scania CV AB

PROGRAMME


Exhaust Gas Recirculation (Egr) For Diesel Engines 18–19 October | 08:30 – 16:30

Meeting the requirements of heavy-duty engine emissions regulations is a challenge for all engine manufacturers. Since the introduction of Exhaust Gas Recirculation (EGR) in medium and heavy-duty diesel engines, these systems have become more sophisticated and tightly integrated with emission control systems.

This 2-day seminar will explore the advantages and disadvantages of EGR. The seminar will begin by defining EGR and why it is used in diesel engines. Also implementation of EGR systems and examples of these systems on medium and heavy-duty diesel engines will be analyzed. Also, a section will be devoted to the comparison between EGR and SCR and their future roles in reducing NOx emissions.

Advanced Diesel Particulate Filtration 18–19 October | 08:30 – 16:30

As diesel emissions regulations have become more and more stringent, diesel particulate filters (DPF) have become possibly the most important and complex diesel aftertreatment device. This seminar covers many DPF-related topics using fundamentals from various branches of applied sciences such as porous media, filtration and materials sciences.

Structure, geometry, composition, performance, applications and optimizations of DPFs are some of the main topics covered in this advanced level seminar. Computer simulation techniques for analysis and optimization of DPF performance are also demonstrated.

Instructor: Magdi KhairMeeting room: Room 34 HRegistration fee: €990 + VAT (Member) - €1080 + VAT (Non-Member)

Instructor: Dr. Athanasios G. Konstandopoulos and Dr. Mansour MasoudiMeeting room: Room 40BLRegistration fee: €990 + VAT (Member) - €1080 + VAT (Non-Member)

TRAINING COURSES

If you wish to attend this training course, please do come and see us at the registration desk. Please note that registration is subject to availability.


SAE INTERNATIONAL EVENTS

2019Connect2Car™ at CES January 8Las Vegas, NV

International Powertrains, Fuels & Lubricants Meeting January 22-24San Antonio, TX

Hybrid and Electric Vehicle Technologies February 19-21Anaheim, CA

On-Board Diagnostics March 12-14Stuttgart, Germany

SAE AeroTech Americas March 26-28Charleston, SC

Government/Industry MeetingApril 3-5Washington, DC

High Efficiency IC Engine April 7-8Detroit, MI

WCX™: SAE World Congress Experience April 9-11Detroit, MI

Connect2Car™ at WCXApril 9-11Detroit, MI

Noise and Vibration Conference & Exhibition June 10-13Grand Rapids, MI

International Conference on Icing of Aircraft, Engines, and Structures June 17-21, 2019 Minneapolis, MN

JSAE/SAE International Powertrains, Fuels & Lubricants MeetingAugust 25-29 Kyoto, Japan

COMVEC™September 10-12Indianapolis, IN

On-Board Diagnostics September 17-19Garden Grove, CA

North American International Powertrain ConferenceSeptember 18-20Chicago, IL

Brake Colloquium & Exhibition September 22-25Orlando, FL

SAE AeroTech Europe September 24-26Bordeaux, France

Thermal Management Systems SymposiumOctober 15-17Plymouth, MI

2018Intelligent and Connected Vehicles August 14-15Kunshan City, Jiangsu, China

Connect2Car™ Executive Leadership ForumSeptember 5-6San Jose, CA

SAE New Energy Vehicle Forum September 11-12Shanghai, China

COMVEC™ September 11-13Rosemont, IL

On-Board Diagnostics September 11-13Indianapolis, IN


Noise and Vibration Forum September 13Shanghai, China

International Powertrains, Fuels & Lubricants MeetingSeptember 17-19Heidelberg, Germany

From ADAS to Automated Driving October 9-11Detroit, MI

Transmission and Driveline TechnologiesOctober 9-10Plymouth, MI

Co-Optimization of Fuels and Engines October 9-10Plymouth, MI

Thermal Management Systems SymposiumOctober 9-11San Diego, CA

Brake Colloquium & Exhibition October 14-17Palm Desert, CA

Heavy Duty Diesel Emissions Control October 16-17Gothenburg, Sweden

SAE/JSAE Small Engine Technology Conference November 6-8Dusseldorf, Germany

Aerospace Systems + Technology Conference November 6-8London, UK

Defense Maintenance and Logistics ExhibitionDecember 17-19Tampa, FL

DoD Maintenance SymposiumDecember 17-20Tampa, FL

For an updated listing of events, dates and locations, please refer to sae.org/events/

P18280961

P18280961_ad_revision_a4.indd 1 8/1/18 9:04 AM


PLATINUM SPONSOR

GOLD SPONSORS

SILVER SPONSOR

BRONZE SPONSOR

SPONSORS & EXHIBITORS

EXHIBITORS

SAE INTERNATIONAL EVENTS

2019Connect2Car™ at CES January 8Las Vegas, NV

International Powertrains, Fuels & Lubricants Meeting January 22-24San Antonio, TX

Hybrid and Electric Vehicle Technologies February 19-21Anaheim, CA

On-Board Diagnostics March 12-14Stuttgart, Germany

SAE AeroTech Americas March 26-28Charleston, SC

Government/Industry MeetingApril 3-5Washington, DC

High Efficiency IC Engine April 7-8Detroit, MI

WCX™: SAE World Congress Experience April 9-11Detroit, MI

Connect2Car™ at WCXApril 9-11Detroit, MI

Noise and Vibration Conference & Exhibition June 10-13Grand Rapids, MI

International Conference on Icing of Aircraft, Engines, and Structures June 17-21, 2019 Minneapolis, MN

JSAE/SAE International Powertrains, Fuels & Lubricants MeetingAugust 25-29 Kyoto, Japan

COMVEC™September 10-12Indianapolis, IN

On-Board Diagnostics September 17-19Garden Grove, CA


Brake Colloquium & Exhibition September 22-25Orlando, FL

SAE AeroTech Europe September 24-26Bordeaux, France

Thermal Management Systems SymposiumOctober 15-17Plymouth, MI

2018Intelligent and Connected Vehicles August 14-15Kunshan City, Jiangsu, China

Connect2Car™ Executive Leadership ForumSeptember 5-6San Jose, CA

SAE New Energy Vehicle Forum September 11-12Shanghai, China

COMVEC™ September 11-13Rosemont, IL

On-Board Diagnostics September 11-13Indianapolis, IN


Noise and Vibration Forum September 13Shanghai, China

International Powertrains, Fuels & Lubricants MeetingSeptember 17-19Heidelberg, Germany

From ADAS to Automated Driving October 9-11Detroit, MI

Transmission and Driveline TechnologiesOctober 9-10Plymouth, MI

Co-Optimization of Fuels and Engines October 9-10Plymouth, MI

Thermal Management Systems SymposiumOctober 9-11San Diego, CA

Brake Colloquium & Exhibition October 14-17Palm Desert, CA

Heavy Duty Diesel Emissions Control October 16-17Gothenburg, Sweden

SAE/JSAE Small Engine Technology Conference November 6-8Dusseldorf, Germany

Aerospace Systems + Technology Conference November 6-8London, UK

Defense Maintenance and Logistics ExhibitionDecember 17-19Tampa, FL

DoD Maintenance SymposiumDecember 17-20Tampa, FL

For an updated listing of events, dates and locations, please refer to sae.org/events/

P18280961

P18280961_ad_revision_a4.indd 1 8/1/18 9:04 AM

Thank you to the following companies for generously supporting the event.


EXHIBITION FLOORPLAN

Plenary Room

9

7

6

5

catering station

catering station

cate

ring

stat

ion

cate

ring

stat

ion

cate

ring

stat

ion

4

11

2

Hotel lobby

Registration desk

EXHIBITING COMPANY TABLE NUMBER

BASF 2

CAMBUSTION 5

EMINOX 11

FEV 7

JOHNSON MATTHEY 9

PREEM 6

PROVENTIA 4


SPONSORS & EXHIBITOR PROFILES

Johnson Matthey Table n° 12

Orchard Road, Royston SG8 5HEUnited Kingdomhttps://matthey.com

As a global leader in sustainable technologies, Johnson Matthey applies cutting-edge science to create solutions with customers that make a real difference to the world around us.Johnson Matthey has been a leader in its field for more than 200 years, applying unrivalled scientific expertise to enable cleaner air, improved health and the more efficient use of our planet’s natural resources.And their story doesn’t end there. Through continued investment in sound research and development, JM is tackling the world’s big challenges into its third century and beyond.

NGK EUROPE GmbH

Westerbachstr. 32, 61476 Kronberg im Taunus, Germanywww.ngk-insulators.com

NGK EUROPE GmbH is a subsidiary of the leading ceramic technology company NGK INSULATORS LTD., located in Nagoya, Japan. The company deals with the local business in Europe and supplies all major automobile manufacturers with high-performance components for emission control systems.The sales and product management departments

operate in close co-operation between customers and our development center in Japan for both general and customer-specific solutions.

Volvo group

SE-405 08 Gothenburg, Swedenwww.volvo.com

The Volvo Group is one of the world’s leading manufacturers of trucks, buses, construction equipment and marine and industrial engines. We also provide complete solutions for financing and service.By developing and delivering products and services under different brands, we can address many different customer and market segments in mature as well as growth markets.We are close to 100 000 colleagues. Our industrial footprint includes product development and manufacturing or assembly plants in more than 18 countries and we sell our products in more than 190 markets.It is our vision to be the most desired and successful transport solution provider in the world.

Umicore materials technology Rodenbacher Chaussee 4, 63457 Hanau, Germanywww.umicore.com

Umicore is a global materials technology and recycling group. It focuses on application areas

PLATINUM SPONSOR

GOLDSPONSOR

SILVERSPONSOR

GOLDSPONSOR


where its expertise in materials science, chemistry and metallurgy makes a real difference. Its activities are organised in three business groups: Catalysis, Energy & Surface Technologies and Recycling. Each business group is divided into market-focused business units offering materials and solutions that are at the cutting edge of new technological developments and essential to everyday life.Umicore generates the majority of its revenues and dedicates most of its R&D efforts to clean mobility materials and recycling. Umicore’s overriding goal of sustainable value creation is based on an ambition to develop, produce and recycle materials in a way that fulfils its mission: materials for a better life.

Corning One Riverfront Plaza, Corning, New York 14831United Stateswww.Corning.com

Corning is a leading supplier of advanced cellular ceramic substrates and ceramic particulate filters for the world's major manufacturers of gasoline and diesel vehicles. The company invented an economical, high-performance, cellular ceramic substrate in the early 1970s that is now the standard for catalytic converters worldwide. In 1978, Corning developed the cellular ceramic particulate filter to remove soot from diesel emissions. Corning continues to leverage its expertise in material science and manufacturing to develop market-leading emissions control solutions that help our customers meet new emissions standards and enable cleaner air worldwide.

BASF Table n° 2

BASF Catalysts Germany GmbH, Seligmannallee 1, 30173 Hannover, Germanywww.catalysts.basf.com

At BASF, we create chemistry for a sustainable future. The approximately 112,000 employees in the BASF Group work on contributing to the success of our customers in nearly all sectors and almost every country in the world. Our portfolio is organized into five segments: Chemicals, Performance Products, Functional Materials & Solutions, Agricultural Solutions and Oil & Gas. BASF generated sales of more than €70 billion in 2015. BASF’s Catalysts division is the world’s leading supplier of environmental and process catalysts. The group offers exceptional expertise in the development of technologies that protect the air we breathe, produce the fuels that power our world and ensure efficient production of a wide variety of chemicals, plastics and other products, including advanced battery materials. By leveraging our industry-leading R&D platforms, passion for innovation and deep knowledge of precious and base metals, BASF’s Catalysts division develops unique, proprietary solutions that drive customer success.

BRONZESPONSOR


Cambustion Table n° 13

J6 The Paddocks, 347 Cherry Hinton Road, Cambridge CB1 8DH, United Kingdomwww.cambustion.com

Cambustion’s fast-response gas and particulate analyzers offer HC, NOx, CO/CO2 and particulate mass & number measurements, enabling engineers worldwide to understand engine operation and meet emissions targets, including real world driving. Rapid mapping and transient mapping capabilities offer cost effective routes to emissions compliance. Applications include after-treatment and engine development, spanning gasoline PFI and GDI, LNG/ CNG, LPG, and Diesel projects. Cambustion’s Particulate Filter Test System allows QC and development engineers to rapidly load, assess, and regenerate GPFs & DPF’s from light to heavy duty, without costly powertrain facilities. Accelerated ashing capability offers a cost-effective way to ensure durability targets are met.

Eminox Ltd. Table n° 11

Miller Road, Corringham Road Industrial EstateGainsborough, Lincolnshire, DN21 1QBUnnited Kingdomwww.eminox.com

Eminox provides innovative solutions for OEMs, from your concept through to your production. The expertise of our design and engineering teams ensures we deliver engineering excellence by understanding the complex problems you

have and delivering bespoke, advanced designs for EATS.With co-located design and production facilities we offer you the agility needed to provide a creative solution to your product targets. Our experience and knowledge of developing elegant, customised products ensures rapid entry to market through quick prototyping and flexible tooling. We specialise in niche volume production in the UK. For 40-years we have designed and manufactured exhausts and after-treatment systems for heavy-duty vehicles and equipment, in the UK and our new facility, near Shanghai, guarantees delivery of larger volumes.

FEV Table n° 7

Neuenhofstr. 181, D - 52078 Aachen,Germanywww.fev.com

The FEV Group, with headquarters in Aachen, Germany, is an internationally recognized vehicle development services provider. FEV’s expertise ranges from consulting to the development and testing of innovative vehicle concepts through readiness for serial production. In addition to traditional engine and transmission development, vehicle integration, calibration, and the homologation of state-of-the-art gasoline and diesel engines, increasing importance is being placed on the development of hybrid and electric powertrains as well as alternative fuels. FEV experts focus on the advancement of electronic control systems, as well as connected vehicles and automation. The “FEV Software and Testing Solutions” product portfolio complements these services with cutting-edge test fields, measuring equipment and software solutions that help make the development process more efficient and transfer significant process steps from the road to the test rig – or even to computer simulation.


Preem Table n° 6

Raffinaderivägen 25, 418 79 Gothenburg,

Swedenwww.preem.se

Preem – Sweden’s largest Oil Company and the largest refiner in the Nordic Region: • Two sophisticated refineries (Lysekil and

Gothenburg) with total capacity of 18 million m3 per year,

• Focus on producing high quality value-added “green” transportation fuels

• Biggest refiner in the Nordic region with 30% of total refining capacity and 80% in Sweden

• In Sweden we supply energy and fuel equivalent to 15% of the country's total energy consumption,

• About 50% of all refined products sold in Sweden are produced by Preem,

• Two thirds of the production are exported - Preem is one of Sweden's largest exporters,

• Highly regarded shipping regulations

Proventia Table n° 4

Tietotie 1, 90460 Oulunsalo,

Finlandwww.proventia.com

Proventia is a Finnish technology company that provides technologies and services for engine, machine and automotive industries. Proventia develops and supplies high quality exhaust aftertreatment components and systems for diesel engines, non-road machines and heavy vehicles. Proventia’s key competence is strong DPF, SCR and AdBlue® mixing expertise combined with innovative design, engineering and testing services. In addition, Proventia provides modular test laboratories for the automotive and machine industries. Proventia Test Solutions cover the needs of combustion and electric engine, powertrain, hybrid, component and battery development and testing. The modular concept scales from a single laboratory up to large test centers.

HEAVY-DUTY DIESEL EMISSIONS CONTROL SYMPOSIUM · Heavy-Duty Diesel Emissions Control Symposium |...

Documents

Transcript of HEAVY-DUTY DIESEL EMISSIONS CONTROL SYMPOSIUM · Heavy-Duty Diesel Emissions Control Symposium |...