Heather S. McCall

19 Narragansett Trail Buxton, ME 04093

Phone: 207-271-0337 E-mail: heathersmccall@yahoo.com

EDUCATION

Cornell University- Ithaca, NY

1992-1996 • B.S., Civil Engineering- Focus: Environmental and Water Resource Engineering

EXPERIENCE

McCall Engineers, LLC - Buxton, Maine

5/11-Present • President- McCall Engineers (ME) is a civil engineering consulting firm focused on the design of transportation and land development projects with an emphasis on hydraulics, hydrology and drainage engineering. Heather McCall, President of ME, has experience in design and project management of DOT projects (MD, PA and VA), drainage repair contracts, construction product selection. ME uses state of the art Computer Aided Design (CAD) and Geographic Information (GIS) design technology for engineering calculations, as well as the productions of plans, maps, and presentation graphics. ME is also well versed in software used for the sizing of structures and meeting state, local, and federal water quality regulations. Although Mrs. McCall is the only full time employee, ME offers a comprehensive portfolio of services for civil engineering projects. Mrs. McCall has a list of trusted specialists from her many years in the business. These specialists can handle anything from state of the art rendering, CAD support, technology transfer, programming, water treatment, and green building technology. In addition to working with contractors and developers, ME will seek out the engineering community to assist with training opportunities in our areas of expertise.

CONTECH Stormwater Solutions- Scarborough, Maine

2/06-Present • Stormwater Design Engineer- Peformed technical design on water quality systems (hydrodynamic separators, screening devices and filtration units) and detention systems (CONSPAN, CONSTORM, CMP and ChamberMaxx). Prepared technical reports, hydraulic gradeline and efficiency calculations, and HydroCAD routing data for the incorporation of the system into the stormdrain profile of the projects. • Project Manager- Managed Water Quality system and Detention system project load for New England territory. Worked with project after Design phase into the Quote/Order phase with the Contractor. Provided technical assistance during installation. Total project load exceeded $18M in design, quotes and sales. This value is an estimated third of the entire New England project load for the company. • Design Software- Created Excel Software program for hydrodynamic separator systems using advanced Macros and I-Logic to communicate engineer’s design into drafting functionality. • Training - Presented “Lunch and Learn” seminars to engineering consulting firms and regulatory agencies (ME DEP, RI DEM, CT DEP). Discussed design challenges and changing Stormwater Regulations. Performed In-House training sessions on Hydrology & Hydraulics, Product Design and Processes and computer design programs for new employees. • Process Streamlining- Created a Company-wide electronic process for drafting Submittal drawings to Clients. Implementation resulted in an improvement in accuracy, drawing completion and consistency with file locations.

Gannett Fleming, Inc.- Baltimore, MD

4/04-10/04 • Hydraulic Design Engineer- Research and investigation into engineering design options for the failing inlet and outlet system in the Washington D.C. Tidal Basin.

Maryland State Highway Administration (SHA)-Baltimore, MD Highway Hydraulics Division

10/98-2/04 • Hydraulic Design Engineer- Design and analysis of highway drainage structures and stormwater management facilities in planning, design, construction, and maintenance phases of SHA’s project development program. Designed alternative stormwater management options for new, rehabilitation, special and remedial roadway projects based on factors such as project schedule, environmental impacts, costs, community concerns, constructability and the potential for future adjustments in project scope. Coordinated activities such as requesting surveys, soil borings and foundation investigations, utility information, environmental assessment, and other permitting requirements. Conducted project meetings. Preparation of contract documents for inhouse highway projects including drainage design plans and details, specifications and engineering cost estimates, Stormwater Management reports for submittal to MDE, timely acquisition of SWM, Erosion & Sediment Control permits, and other environmental permits. • Project Manager of various Drainage/Flooding complaints due to SHA roadways- Evaluated drainage/flooding complaints and determined retrofit designs. • Stream Bank Stabilization of Swan Creek @ MD 462- The new bank design and dimensions were modeled using HEC-RAS floodplain analysis. Two instream rock vanes were constructed to manage the thalweg of the stream and correct the erosion along the bank. Served as Project Manager at the construction site. • Construction Project Engineer for Highway Hydraulic’s State Wide

Drainage Contracts- Spent 6 months managing numerous drainage construction projects throughout Maryland. Worked directly with the contractors and developed modified solutions when conflicts were discovered. • Project Manager of Consultant Projects for SHA roadways- Established scope of work, reviewed estimates, negotiated fees, reviewed engineering work, and gave technical directions. • Planning and Development Review- Evaluated private development projects that impacted SHA’s highway facilities and recommended actions to ensure that the interests of SHA and its customers were protected.

University of Maryland- College Park, MD

School of Civil Engineering

5/98-9/98 • CAD and Graphic Operator- Participated in visualization research for SHA. Used Descartes with MicroStation to warp aerial photography into standard State Highway coordinates.

Computer Sciences Corporation

NASA- Goddard Space Flight Center- Greenbelt, MD

12/96-6/98 • Environmental Engineer/Project Manager-Hydrogeology & Site Investigation:

Resolution of Groundwater Flow- Conducted monthly field visits of monitoring/piezometric wells on GSFC. Prepared monthly and quarterly reports. Final report contained computer based modeling of groundwater flow and contamination plumes using GEOEAS and ARC-INFO programs. • Environmental Engineer/Project Manager- Preliminary Investigation/Site

Inspection (PA/SI) of GSFC Propulsion Research Facility- Conducted research, field work and surveys of contaminated leach pits. Prepared engineering plans and cost estimates for leach pit remediation. Prepared Final PA/SI and Environmental Impact Statement for the site. • Participated in public hearings for ‘Community Right-to-Know’ EPCRA, RCRA and NPDES reporting requirements. • Met with sub-contractors for permitting/field work updates- resolved any pending issues/conflicts.

SOFTWARE

Auto CADD, MicroStation, InRoads, Descartes, GIS, ArcView, Adobe PhotoShop, Microsoft Excel Stormwater design software (Culvert Master, HY-8, Hydro-CAD, HEC-RAS, SCS TR-55, TR-20, InRoads Storm and Sanitary, GeoPak)

CAREER DEVELOPMENT

• E.I.- NY State Fundamentals of Engineering, 1996 • P.E. Application accepted- State of Maine • Attended various stream and hydrology training sessions (Level I/II Rosgen theories, Stream Geomorphology, Computer Stream Modeling (HEC-RAS). • Sandler Sales Institute’s President Club program- Attended a 13 session program about strengthening sales and customer relations. PUBLICATIONS

CE NEWS- Professional Development Series- Economic Optimization of Sustainable Subsurface Infiltration Systems-

By William G. Young, P.E.; Derek Berg; and Heather McCall