Heated 4 Floors - Watts Water Technologiesmedia.wattswater.com/p-st-ez.pdfTile or stone 4 Heated in...
1
SunStat® Thermostat Mortar bed TapeMat power lead in electrical conduit Sensor wire Floor sensor SunTouch TapeMat Tile or stone 4 Heated Floors in Steps Easy *After you complete Step 4, wait 28 days for the mortar to cure completely before having a certified electrician connect a SunStat® thermostat. Attach TapeMat® 1. Install tile* 4. Secure floor sensor 2. Apply thin set 3. electric floor heating & snow melting TapeMat® electric floor warming mats make installation fast. With SunTouch’s open-weave TapeMat, installation can be completed in one day. There’s no need to wait for mortar to cure overnight. SunTouch.com Save valuable time on your next electric floor heating installation.
Transcript of Heated 4 Floors - Watts Water Technologiesmedia.wattswater.com/p-st-ez.pdfTile or stone 4 Heated in...
SunStat® Thermostat
Mortar bed
TapeMat power lead in electrical conduit
Sensor wire
Floor sensor
SunTouch TapeMat
Tile or stone
4Heated
Floorsin
StepsEasy
*After you complete Step 4, wait 28 days for the mortar to cure completely before having a certified electrician connect a SunStat® thermostat.
Attach TapeMat®1.
Install tile*4.
Secure floor sensor2.
Apply thin set3.
electric floor heating & snow melting
TapeMat® electric floor warming mats make installation fast. With SunTouch’s open-weave TapeMat, installation can be completed in one day. There’s no need to wait for mortar to cure overnight.
SunTouch.com
Save valuable time on your next electric floor heating installation.
