HEAT TRACING SPECIALIST WHO IS BDP?. BDP INTERNATIONAL ABOUT BDP Calgary Based Integrated EPC...
-
Upload
dean-graves -
Category
Documents
-
view
219 -
download
3
Transcript of HEAT TRACING SPECIALIST WHO IS BDP?. BDP INTERNATIONAL ABOUT BDP Calgary Based Integrated EPC...
HEAT TRACING SPECIALIST
WHO IS BDP?
BDPINTERNATIONAL
ABOUT BDP
Calgary Based Integrated EPC Company specialized in heat tracing
Holds APEGGA Permit to Practice
Offices In Calgary & Edmonton
25 Full Time Employees & 5 Engineering Consultants on “As Needed” Basis
Developed Internal Quality Program
BDPINTERNATIONAL
ABOUT BDP – continued Safety is a core value at BDP
Good references with Alberta clients
Designed steam tracing facilities on all Petro-Canada projects in Alberta since 2002 as subcontractor to large EPC firms
Key People:
Tony Miletic – 25 years of experience in piping design, last 15 years in steam tracing
Drago Crnogorac – over 25 years in project management
BDPINTERNATIONAL
ABOUT BDP – continued
Construction Capabilities
BDP Industrial – BDP’s construction group engaged for work at modularization shop or at site with non-union or CLAC labor
Subcontract NewFab Industries at mod shop or at site where union labor is required
HEAT TRACING SPECIALIST
WHY BDP?
BDPINTERNATIONAL
WHAT ARE ADVANTAGES AND
VALUE-ADD OF USING A SPECIALIZED INTEGRATED EPC COMPANY TO EXECUTE HEAT TRACING PORTION OF THE PROJECT?
BDPINTERNATIONAL
HEAT TRACING ON LARGE PROJECTS
Total Installed Cost of heat tracing facilities can be significant on mega projects in Alberta
BDP’s experienced staff could support large EPC firm during FEED with more accurate scoping of heat tracing facilities
BDP’s input during front-end design improves the overall accuracy of FEED cost estimates with lower risk of changes during detailed design and lower schedule impact.
BDP ADVANTAGE
BDPINTERNATIONAL
BDP ARE HEAT TRACING SPECIALISTS
We are specialized in heat tracing design, engineering and installation
We have experience on large projects as subcontractor to large EPC firms
Leadership skills of our key people will ensure quality and "fit for purpose" design
BDPINTERNATIONAL
BDP IS SMALL AND EFFICIENT
We are small, flexible and react fast
We are very efficient – no wasted hours
We plan our activities well and we stay on schedule and on budget
We have proven track record on previous heat tracing projects
INTEGRATED EPC APPROACH TO HEAT
TRACING
BDPINTERNATIONAL
INTEGRATED EPC APPROACH TO HEAT TRACING
Front-End Design
BDP can provide design input at the front-end of the project (number and layout of steam and condensate manifolds is particularly important at this stage)
Constructability input in early design stages Our front-end design input leads to accurate and
complete scope definition
Well defined scope results in accurate cost estimate
BDPINTERNATIONAL
INTEGRATED EPC APPROACH TO HEAT TRACING -continued
Detail Engineering and Procurement
Our detailed and organized approach to executing design activities results in quality and fit-for-purpose design
Regular constructability input and review meetings are held during detail design
We keep track of our progress, measure performance during detail design and make corrections where necessary
Procurement and expediting of heat tracing material
BDPINTERNATIONAL
INTEGRATED EPC APPROACH TO HEAT TRACING -continued
Construction
Effective close-out of detailed design and transition to installation phase
Installation of heat tracing facilities in the module shop and on site
BDP construction group uses non-union affiliated DHL on site
BDP’s sub-contractor NewFab will execute all union work on site
BDP design office will provide on-site engineering support to our construction team
BDPINTERNATIONAL
INTEGRATED EPC APPROACH TO HEAT TRACING -continued
Fabrication – Cost Advantage
Steam/Condensate Manifolds and Piping fabrication overseas via association with a fabrication shop in South-East Europe for further cost advantage
QUALITY AND SAFETY
BDPINTERNATIONAL
QUALITY AND SAFETY
BDP has Quality Program and follows internally established quality procedures
If subcontracted by another EPC firm BDP could follow the firm’s quality program for consistency if necessary
Safety is a core value at BDP. We apply safety principles from front-end and detailed design and procurement to construction
Lessons Learned program used on projects
OUR LOCATION
BDPINTERNATIONAL
Detailed design and engineering of tracing facilities will be executed by a dedicated team located in our downtown Calgary office with support from our Edmonton office team.
Office in Edmonton - proximity to refinery sites for field visits, verifications and construction support
OUR LOCATION
DESIGN BASIS AND
PROJECT SET-UP
BDPINTERNATIONAL
DESIGN BASIS AND PROJECT SET-UP
BDP needs the following data to carry out detailed heattracing design:
P&ID and Line List
3D Model
Piping Isometrics in AutoCad format
Equipment List and Layout
Data transfer through FTP connection.
Regular project progress meetings are encouraged.
REFERENCES
BDPINTERNATIONAL
REFERENCESPetro-Canada RCP project Design and Engineering of all steam tracing facilities. Produced over 15,000 engineering documents and worked off 50,000
hours over 18 months. Work completed on schedule and under budget.
Petro Canada EDD Project, Edmonton AB Provided Steam Tracing design and Steam Tracing construction support
on ISBL Plant 63 and construction support on OSBL. Produced more than 2000 documents ahead of schedule and within the budget. Significantly improved Steam Tracing construction phase by introducing two additional types of documents: Steam Tracing Circuit Log and Manifold Installation Drawing. These documents have become the main reference documents for the construction crew.
BDPINTERNATIONAL
REFERENCES - continued
Petro Canada SIG / SIG-MOD Project, Edmonton AB Provided piping design and construction support on ISBL Plant 63
and OSBL Plant 13.
Interquiza PTA Plastic Plant, Montreal, QB
Design of manifold locations and interconnecting piping between
steam/condensate headers and manifolds. Produced construction isometrics and provided an update to the Rebis Model using team of 19 designers. Steam Tracing isometrics were produced in Calgary using a team of four designers.