OSRAM OSTAR Headlamp and Headlamp Pro Details on Handling Mounting and Electr Connection
Headlamp Assembly Removal and Installation
-
Upload
michael-hernandez -
Category
Documents
-
view
31 -
download
0
Transcript of Headlamp Assembly Removal and Installation
-
2011 Ford EXPLORER Submodel: | Engine Type: | Liters: Fuel Delivery: | Fuel:
417-01 Exterior Lighting 2011 ExplorerREMOVAL AND INSTALLATION Procedure revision date: 01/22/2013
Headlamp AssemblyExploded View
Item Service Part Number Description Torque Material Name Notes1 W711158 Headlamp assembly bolts (2 required) - - -2 13008 Headlamp assembly (Right Hand (RH) / LH ) - - -3 W715226 Front fender-to-headlamp assembly bolt 7 Nm (62 lb-in) - -4 - Headlamp assembly electrical connectors (part of 14290) - - -
Removal
WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in Section 100-00. Failure to follow this instruction may result inserious personal injury.
1. Remove the front bumper cover. REFER to Section 501-19, Bumper Cover - Front.
2. Remove the 3 headlamp assembly retainers.
3. Remove the headlamp assembly and disconnect the electrical connectors.Installation
1. Install the headlamp assembly.
1. Connect the electrical connectors and install the headlamp assembly.
2. Install the 2 headlamp assembly bolts.
Tighten to 3 Nm (27 lb-in).
3. Install the front fender-to-headlamp assembly bolt.
Tighten to 7 Nm (62 lb-in).
2. Install the front bumper cover. REFER to Section 501-19, Bumper Cover - Front.
Copyright 2013 Ford Motor Company