Provided by: NAYAtel NOC

HDBox Smart Upgradation Manual

www.nayatel.com /NayatelUAN: (051) 111 11 44 44

2

2

UAN: 111 11 44 44

1. Download 1.15 �rmware using below mentioned link

“https://nayatel.com/wp-content/uploads/2019/06/1.15.rar”

Kindly note that this manual is only for following series boxes:

1. factory_update_param.aml (135 Bytes)2. Pakistan_H1.0_S1.15.43R_SVN144011_20170907.2310 (272 MB)

2. Unzip the �le “1.15” into the root directory of formatted USB (FAT 32 or NTFS). It should contain following two �les

3. Insert the USB in HDBox Smart and restart it

4. Keep pressing the back button from the remote as soon as you restart the HDBox until you see the following screen

5. When the up gradation is completed, HDBox Smart will reboot automatically

6. After reboot go to Settings About. Software version should be 1.15R

Note: If box gets stuck during installation, re-try by changing the format of the USB.

7. Do not reboot or turn o� HDBox Smart during up gradation.

www.nayatel.com /NayatelUAN: (051) 111 11 44 44

1. 0407001543xxxxxxx2. 0407001619xxxxxxx3. 0407001629xxxxxxx4. 0407001649xxxxxxx5. 0407001721xxxxxxx