HD Wi-Fi Indoor Security Camera HD Wi-Fi Indoor Security ...€¦ · pueden variar según el...
2
2 5 3 4 1 fxc003484156 10 11 12 6 7 8 10 9 Add Camera Scan the QR code using your mobile device Center the QR code inside the frame Make sure that your camera is turned on and has a working internet connection fxc003484156 fxc003484156 fxc003484156 12 11 13 Step One 1. Plug in your camera. Camera turns on automatically when the power adapter is connected. Setup Instructions HD Wi-Fi Indoor Security Camera HD Wi-Fi Indoor Security Camera Quick Start Guide For FAQs, setup guides, and support videos visit flirsecure.com/support Initial Setup What’s Included Step Two 2. Remove the protective film on the lens. © 2016, FLIR Systems, Inc. FXC21_QSG_EN_SP_R2 flirsecure.com 1. Status LED Steady Red: Camera is starting up or resetting. Slow-Flashing Red: The router or network that the camera is connected to is down. Check your router settings. Steady Blue: Camera is connected to FLIR Cloud services. Fast-Flashing Blue: Firmware upgrade in progress. DO NOT UNPLUG YOUR CAMERA. Slow-Flashing Blue: Camera setup in progress. Slow-Flashing Blue and Red: Camera is ready for setup. LED Off: Camera is in privacy / covert mode, or is turned off. 6. Micro USB Power Port 7. Reset Button 8. microSD Card Memory Slot 9. Micro USB Power Cable Holder: Secure the USB power cable with this clip. 10. Camera Base 10. Camera Base 11. QR Code 12. Device ID 13. Mounting Plate 2. Scan the QR code as shown below. Log In Welcome to FLIR Secure SIGN UP FORGOT PASSWORD? LOG IN Email Password 3. Download the FLIR Secure™ app to your mobile device, then launch the app. Wi-Fi Setup - For Android Users Only Setting Up Your Camera IF Bluetooth (BLE) is not available on your mobile device, follow these setup instructions: Camera Overview Note: If you cannot scan the camera’s QR code, tap to enter the camera’s Device ID manually. See the “Camera Overview” section for Device ID location. Note: If your mobile device has bluetooth turned on but your camera’s device ID does not show up on the screen, tap “CAN’T FIND YOUR DEVICE?”. Scan the QR code and follow the on-screen instructions to complete setup. 1. Tap ADD DEVICE, then tap Camera. If this is not the first device on your account, tap and then tap Camera. 1 HD Wi-Fi Security Camera 1 micro USB Cable 1 microSD Card (Pre- installed) 1 Power Adapter 1 Mounting Plate (Pre- attached) Quick Start Guide and Safety Information 2 Mounting Screws 2 Drywall Anchors 3 Cable Clips Note: Camera configuration, memory card size, and the number of accessories may vary by model. Please refer to your package for specific details. Your accessories might appear different from the ones depicted in this guide. 2. Camera Lens 4. Microphone 3. Speaker 5. Night Vision LED 4. Tap SIGN UP and enter your email address and password to create a new FLIR Cloud™ account. Note: If you already have an existing FLIR Cloud™ account, enter your email address and password and tap LOG IN. Home Add your first Device ADD DEVICE Add Device 2. Tap ADD DEVICE, then tap Camera. If this is not the first device on your account, tap and then tap Camera. 3. Follow the on-screen instructions to complete setup. New Device Cancel Which device would you like to add? Security System Camera Camera Note: If Bluetooth (BLE) is not supported on your mobile device, follow the setup instructions in the “Wi-Fi Setup - For Android Users Only” section. Note: Refer to your mobile device’s user guide for instructions on turning on Bluetooth. 1. Make sure your mobile device’s Bluetooth is turned on. 3. Follow the on-screen instructions to complete setup. FLIR Secure™ English / Español FXC21_QSG_EN_SP_R2.indd 1-2 8/18/2016 5:09:01 PM
Transcript of HD Wi-Fi Indoor Security Camera HD Wi-Fi Indoor Security ...€¦ · pueden variar según el...
2
5
3
4
1
fxc003484156
10
11
12
6
7
8
10
9
Add Camera
Scan the QR code using your mobile device
Center the QR code inside the frame
Make sure that your camera is turned onand has a working internet connection
Se rial: 12345 6789 012
fxc003484156
fxc003484156
fxc003484156
fxc003484156
12
11
13
Step One
1. Plug in your camera. Camera turns on automatically when the power adapter is connected.
Setup Instructions
HD Wi-Fi Indoor Security Camera HD Wi-Fi Indoor Security Camera
Quick Start Guide
For FAQs, setup guides, and support videos visitflirsecure.com/support
Initial Setup
What’s Included
Step Two
2. Remove the protective film on the lens.
© 2016, FLIR Systems, Inc.FXC21_QSG_EN_SP_R2
flirsecure.com
1. Status LED Steady Red: Camera is starting up or resetting. Slow-Flashing Red: The router or network that the camera is connected to is down. Check your router settings. Steady Blue: Camera is connected to FLIR Cloud services. Fast-Flashing Blue: Firmware upgrade in progress. DO NOT UNPLUG YOUR CAMERA. Slow-Flashing Blue: Camera setup in progress. Slow-Flashing Blue and Red: Camera is ready for setup. LED Off: Camera is in privacy / covert mode, or is turned off.
6. Micro USB Power Port
7. Reset Button
8. microSD Card Memory Slot
9. Micro USB Power Cable Holder: Secure the USB power cable with this clip.
10. Camera Base
10. Camera Base
11. QR Code
12. Device ID
13. Mounting Plate
2. Scan the QR code as shown below.
Log In
Welcome to FLIR Secure
SIGN UP
FORGOT PASSWORD?
LOG IN
Password
3. Download the FLIR Secure™ app to your mobile device, then launch the app.
Wi-Fi Setup - For Android Users Only
Setting Up Your Camera
IF Bluetooth (BLE) is not available on your mobile device, follow these setup instructions:
Camera Overview
Note: If you cannot scan the camera’s QR code, tap to enter the camera’s Device ID manually. See the “Camera Overview” section for Device ID location.
Note: If your mobile device has bluetooth turned on but your camera’s device ID does not show up on the screen, tap “CAN’T FIND YOUR DEVICE?”. Scan the QR code and follow the on-screen instructions to complete setup.
1. Tap ADD DEVICE, then tap Camera.
If this is not the first device on your account, tap and then tap Camera.
1 HD Wi-Fi SecurityCamera
1 micro USB Cable
1 microSD Card (Pre-installed)
1 Power Adapter
1 Mounting Plate (Pre-attached)
Quick Start Guide and Safety Information
2 Mounting Screws
2 Drywall Anchors
3 Cable Clips
Note: Camera configuration, memory card size, and the number of accessories may vary by model. Please refer to your package for specific details. Your accessories might appear different from the ones depicted in this guide.
2. Camera Lens 4. Microphone
3. Speaker 5. Night Vision LED
4. Tap SIGN UP and enter your email address and password to create a new FLIR Cloud™ account.
Note: If you already have an existing FLIR Cloud™ account, enter your email address and password and tap LOG IN.
Home
Add your first Device
ADD DEVICEAdd Device
2. Tap ADD DEVICE, then tap Camera.
If this is not the first device on your account, tap and then tap Camera.
3. Follow the on-screen instructions to complete setup.
New DeviceCancel
Which device would you like to add?
Security System
CameraCamera
Note: If Bluetooth (BLE) is not supported on your mobile device, follow the setup instructions in the “Wi-Fi Setup - For Android Users Only” section.
Note: Refer to your mobile device’s user guide for instructions on turning on Bluetooth.
1. Make sure your mobile device’s Bluetooth is turned on.
3. Follow the on-screen instructions to complete setup.
FLIR Secure™
English / Español
FXC21_QSG_EN_SP_R2.indd 1-2 8/18/2016 5:09:01 PM
2
5
3
4
1
fxc003484156
10
11
12
6
7
8
10
9
fxc003484156
12
11
13
Paso Uno
1. Conecte su cámara. La cámara se enciende automáticamente cuando se conecta el adaptador de corriente.
Instrucciones de Configuración
fxc003484156
English / Español
Para mayor información sobre las preguntas frecuentes, las guías de configuración y los videos de soporte visite,
flirsecure.com/support
Cámara de Seguridad HD Con Wi-Fi
Configuración Inicial
El Producto Incluye
2. Retire la película protectora del lente.
© 2016, FLIR Systems, Inc.
flirsecure.com
6. Puerto de Alimentación Micro USB
7. Botón de Reinicio
8. Ranura para Tarjeta de Memoria microSD
9. Sujetador para el Cable de
10. Base de la Cámara
10. Base de la Cámara
11. Código QR
12. ID de Dispositivo
13. Placa de Montaje
Guía de Inicio Rápido
Cámara de Seguridad HD Con Wi-Fi
1 Cámara de SeguridadWi-Fi HD
1 Cable Micro USB
1 Tarjeta microSD (Preinstalada)
1 Adaptador de Corriente
1 Placa de Montaje (Previamente ensamblada)
Guía de Inicio Rápido e Información de Seguridad
2 Tornillos para el Montaje
2 Taquetes para Yeso
3 Sujetadores de Cable
2. Lente de la Cámara 4. Micrófono
3. Altavoz 5. LED de Visión Nocturna
FXC21_QSG_EN_SP_R2
Nota: La configuración de la cámara, el tamaño de la tarjeta de memoria yel númerode accesoriospueden variar según el modelo. Consulte su paquete para conocer los detalles específicos. Es posible que sus accesorios parezcan diferentes a los descritos en esta guía.
Log In
Welcome to FLIR Secure
SIGN UP
FORGOT PASSWORD?
LOG IN
Password
3. Descargue la aplicación FLIR Secure™ en su dispositivo móvil, luego inicie la aplicación.
FLIR Secure™
4. Pulse SIGN UP e ingrese su dirección de correo electrónico y la contraseña para crear una nueva cuenta de FLIR Cloud™.
Nota: Si ya tiene una cuenta existente de FLIR Cloud™, ingrese su dirección de correo electrónico y contraseña, y pulse LOG IN.
Paso Dos
Home
Add your first Device
ADD DEVICEAdd Device
Configuración de la Cámara
2. Pulse la opción ADD DEVICE, luego pulse Camera.
Si este no es el primer dispositivo en su cuenta, pulse y luego pulse Camera.
3. Siga las instrucciones en la pantalla para finalizar la configuración.
New DeviceCancel
Which device would you like to add?
Security System
CameraCamera
Nota: Si su dispositivo móvil no es compatible con Bluetooth (BLE), siga las instrucciones de configuración en la sección “Configuración de Wi-Fi: Solo para los Usuarios de Android”.
Nota: Consulte la guía de usuario de su dispositivo móvil para obtener instrucciones sobre cómo activar el Bluetooth.
1. Asegúrese de que el Bluetooth del dispositivo móvil esté activado.
Descripción General de la Cámara1. Led de Estado Rojo Fijo: La cámara se está encendiendo o reiniciando. Rojo Intermitente Lento: El router o La red a
la que está conectada la cámara dejó de funcionar. Compruebe la configuración del router.Azul Fijo: La cámara está conectada a los servicios FLIR Cloud.Azul Intermitente Rápido: La actualización de firmware está en curso. NO DESCONECTE SU CÁMARA.Azul Intermitente Lento: La configuración de la cámara está en curso.Azul Y Rojo Intermitente Lento: La cámara está lista para la configuración.Led Apagado: La cámara está en el modo privacidad/encubierto o se encuentra apagada.
Alimentación Micro USB: Fije el cable de alimentación USB con este sujetador.
Add Camera
Scan the QR code using your mobile device
Center the QR code inside the frame
Make sure that your camera is turned onand has a working internet connection
Se rial: 12345 6789 012
2. Escanee el código QR como se muestra a continuación.
Configuración de Wi-Fi: Solo para los Usuarios de Android
Nota: Si no puede escanear el código QR de la cámara, pulse para ingresar el ID del dispositivo de la cámara manualmente. Vea la sección “Descripción General de la Cámara” para conseguir la ubicación del ID del dispositivo.
3. Siga las instrucciones en la pantalla para finalizar la configuración.
1. Pulse la opción ADD DEVICE, luego pulse Camera.
Si este no es el primer dispositivo en su cuenta, pulse y luego pulse Camera.
Nota: Si su dispositivo móvil tiene el Bluetooth activado, pero no aparece su ID de dispositivo de la cámara en la pantalla, pulse "CAN’T FIND YOUR DEVICE?". Escanee el código QR y siga las instrucciones que aparecen en la pantalla para completar la configuración.
Si su dispositivo móvil no es compatible con el Bluetooth (BLE), siga estas instrucciones de configuración:
FXC21_QSG_EN_SP_R2.indd 3-4 8/18/2016 5:09:02 PM
