HCE Feeding System

D r y C a l c i u m H y p o c h l o r i t e C h l o r i n a t o r Fo r A g r i c u l t u r a l A p p l i c a t i o n s

DELIVER UNPARALLELED

CONSISTENT RESULTS

PATENTED PILLOW-SHAPED

BRIQUETTES

• Scalable feeders available to fit a wide range of

water treatment needs

• Patented circulation system concentrates and

stabilizes AvCl solution

• Effective alternative to gas and liquid hypochlorite

• Cost effective

• Low flow uses less water than traditional erosion

systems

• Rugged construction is applicable for even harsh

environments

• Requires no storage tanks or secondary

containment

BENEFITS

Specifically created to supply scalable water treatment services for agricultural applications, the Constant Chlor® HCE (High

Capacity Erosion) Feeding System provides growers with an economical water treatment solution with unequaled service and

support. From small scale to high volume, the HCE Feeding System is the delivery system of choice by providing a consistent

chlorine solution when and where it’s needed.

Automatic. Accurate. Consis tent.www.archwaterworks.com/municipal

CALL 1-800-478-5727

CONSTANT CHLOR® PLUSt o f i n d o u t m o r e a b o u t

o r v i s i t o u r w e b s i t e a t

Arch Chemicals, Inc.5660 New Northside Dr NW, Suite 1100

Atlanta, GA 30328

1-800-478-5727

©2011 Arch Chemicals, Inc. All rights reserved. Constant Chlor® is a registered trademark of Arch Chemicals, Inc.

FEATURES

• Available with 75 lb, 150 lb or 300 lb dry chemical capacities

• Unit constructed of 1/2” high impact PVC; all wetted areas, internal

fittings and level controls constructed of suitable plastics or other

non-metallic material

• Intuitive configuration allows for ease of installation and application

• Higher solution concentrations possible

• Shock treatment utilization available

• Low flow requirements

HCE Dry Calcium Hypochlorite Feeding System

CONSTANT CHLOR® BRIQUETTES

When used with Constant Chlor® Plus Briquettes, the HCE Feeding System provides

the perfect chlorine solution for agricultural applications.

These patented, pillow-shaped briquettes contain a scale inhibitor designed to reduce maintenance and

improve reliability of the feeder system.

TYPICAL PROPERTIES• Available Chlorine (wt%). . . . . . . . . . . . . . . . . . 66%• Scale Inhibitor (wt%) . . . . . . . . . . . . . . . . . . 0.5%• Weight . . . . . . . . . . . . . . . . . . 0.25 oz. (7.0 grams)• Dimensions . . . . . . . . . . . . 1-1/4 in. X 3/4 in. X 1/2 in. (approx 35mm X 19mm X 13mm)

• Dry Solid Product

• More stable than liquid bleach

• Occupies much less space than liquid

bleach

• Cost effective

• Less hazardous and easier to handle

than liquid bleach

• Does not leak

• Scale inhibited

• Low capital cost compared to onsite

generation

• Small pillow-shaped briquettes provide

an optimum spray bed pack resulting in

outstanding solution consistency

• Reduces maintenance of equipment

• Patented formulation

The HCE Feeding System passes water

into a holding reservoir until the water

level rises to a bed of briquettes,

saturating the entire bottom of the bed

evenly. The chlorinated solution mixes

into the reservoir where it is stored until

needed in the disinfection application.

Design simplicity drives

value up and long term

maintenance down.

SPECIFICATIONS

By Unit CapacityDry Chemical Capacity

HCE-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 lbs.

HCE-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 lbs.

HCE-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 lbs.

Dimensions

HCE-075 . . . . . . . . . . . . . . . . . . . . . . . . . . . Diameter: 24” Height: 26”

HCE-150 . . . . . . . . . . . . . . . . . . . . . . . . . . . Diameter: 24” Height: 30”

HCE-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . Diameter: 24” Height: 30”

Chlorine Delivery Rate . . . . . . . . . . . . 13.0-1420.0 lb. AvCl/day

with 70º F inlet water temp.

Pressure Range . . . . . . . . . . . . . . . . . . . . . 10 - 150 psig

Water Inlet Size . . . . . . . . . . . . . . . . . . 1/2 inch, FNPT

Solution Outlet Size . . . . . . . . . . . . . . . 2 inch, FNPT

Site Requirements:

Inlet Water . . . . . . . . . . . . . . . . . . . . . 1.2-9.0 gpm @ 5-80 psig

Operating Temperature . . . . . . . . . . . . 40º - 105º F

All Capacities