Hc stp02 2013-11-20

1. Script Task : STP02 HC---------------------------------------------------------------------------Summary---------Success Num : 32 Fail Num : 0 ----------END---------Mml Command-----ACT CNSCHK:CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:21 O&M #7636455 %%/*46037248*/ACT CNSCHK:CONFIRM=Y;%% RETCODE = 0 Operation succeeded Result of data consistency check --------------------------------Data of HSYS and BAM Data of backup HSYS and HSYS Data of MTP= = =All consistent All consistent All consistentResult of data table consistency check -------------------------------------All data in tables=consistent=All consistent---ENDMml Command-----ACT SERCNSCHK: TBLID=ALL,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:22 O&M #7636456 %%/*46037251*/ACT SERCNSCHK: TBLID=ALL,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Result of data consistency check -------------------------------Data of host and BAM ---ENDMml Command-----DSP EXTM:CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:22 O&M #7636457 %%/*46037254*/DSP EXTM:CONFIRM=Y;%% RETCODE = 0 Operation succeeded Date Time ---= =2013-11-20 16:13:22 ENDMml Command-----DSP CKIILOCK: SHN=0, FN=0, SN=13,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:22 O&M #7636458 %%/*46037256*/DSP CKIILOCK: SHN=0, FN=0, SN=13,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query the phase locking status -----------------------------Shelf No Frame No Slot No Location= = = =0 0 13 Back

2. Board type Phase locking mode Local oscillation status normally, the prewarming is finished ---= = =CKII Trace mode Local oscillation worksENDMml Command-----DSP CKIILOCK: SHN=0, FN=0, SN=15,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:23 O&M #7636459 %%/*46037257*/DSP CKIILOCK: SHN=0, FN=0, SN=15,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query the phase locking status ------------------------------Shelf No Frame No Slot No Location Board type Phase locking mode Local oscillation status normally, the prewarming is finished ---= = = = = = =0 0 15 Back CKII Holding mode Local oscillation worksENDMml Command-----DSP CKII: SHN=0, FN=0, SN=13,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:24 O&M #7636460 %%/*46037258*/DSP CKII: SHN=0, FN=0, SN=13,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query the board work mode ------------------------Shelf No Frame No Slot No Location Board type Operation mode Current reference source ---= = = = = = =0 0 13 Back CKII Auto First BITS clock sourceENDMml Command-----DSP CKII: SHN=0, FN=0, SN=15,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:24 O&M #7636461 %%/*46037264*/DSP CKII: SHN=0, FN=0, SN=15,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query the board work mode ------------------------Shelf No Frame No Slot No Location Board type Operation mode= = = = = =0 0 15 Back CKII Auto

3. Current reference source ---=No reference sourceENDMml Command-----DSP CKIIMS: SHN=0, FN=0, SN=13,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:24 O&M #7636462 %%/*46037267*/DSP CKIIMS: SHN=0, FN=0, SN=13,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query the CKII active/standby status -----------------------------------Shelf No Frame No Slot No Location Board type Master Info ---= = = = = =0 0 13 Back CKII StandbyENDMml Command-----DSP CKIIMS: SHN=0, FN=0, SN=15,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:25 O&M #7636463 %%/*46037276*/DSP CKIIMS: SHN=0, FN=0, SN=15,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query the CKII active/standby status ---------------------------------------Shelf No Frame No Slot No Location Board type Master Info= = = = = =0 0 15 Back CKII Active= = = = = = = = = = = =0 0 10 Front SBPI Normal 4195 Active Normal 1024 4c1fcc50e160 172.18.8.147ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=10,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:25 O&M #7636464 %%/*46037277*/DSP BRD:SHN=0,FN=0,SN=10,LOC=fpb;%% RETCODE = 0 Operation succeeded SBPI Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time Master Info Network interface state DRAM Size Mac address IP Address

4. =Network port self-= = = = = = = = = = =100M Full-duplex 569 906 Normal Normal 00e0fc06010a 00e0fc08010a Not configured Not configured 750CShelf No Frame No Slot No Location Board type Board Status Run time Master Info Network interface state DRAM Size Mac address IP Address Network port self-adaptive attribute= = = = = = = = = = = = =0 0 5 Front SBPI Normal 477 Active Normal 1024 4c1fcca2ad9f 172.18.8.86 Network port self-Network port rate Network port full-duplex attribute Number of packets sent in 1sec Number of packets received in 1sec Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type---Network port self-adaptive attribute Network port rate Network port full-duplex attribute Number of packets sent in 1sec Number of packets received in 1sec Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware typeadaptive= = = = = = = = = = =100M Full-duplex 864 924 Normal Normal 00e0fc060105 00e0fc080105 Not configured Not configured 750CENDMml Command-----DSP BRD:SHN=0,FN=0,SN=5,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:25 O&M #7636465 %%/*46037278*/DSP BRD:SHN=0,FN=0,SN=5,LOC=fpb;%% RETCODE = 0 Operation succeeded SBPI Board ----------adaptive---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=0,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:25 O&M #7636466 %%/*46037279*/DSP BRD:SHN=0,FN=0,SN=0,LOC=fpb;%% RETCODE = 0 Operation succeeded SBPU Board ----------

5. Shelf No Frame No Slot No Location Board type Board Status Run time DRAM Size Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type ---= = = = = = = = = = = = = = =0 0 0 Front SBPU Normal 4195 1024 Normal Normal 00e0fc060100 00e0fc080100 192.168.1.1 192.168.128.1 750C= = = = = = = =0 0 0 Up-fasten SHPU 2M Normal 4227 100= = = = = = = =0 0 0 Down-fasten SHPU 64K Normal 4227 100ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=0,LOC=udb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:25 O&M #7636467 %%/*46037281*/DSP BRD:SHN=0,FN=0,SN=0,LOC=udb;%% RETCODE = 0 Operation succeeded HPU 2M Board -----------Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-code ---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=0,LOC=ddb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:26 O&M #7636468 %%/*46037283*/DSP BRD:SHN=0,FN=0,SN=0,LOC=ddb;%% RETCODE = 0 Operation succeeded HPU 64K Board ----------------Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-codeENDMml Command-----DSP BRD:SHN=0,FN=0,SN=0,LOC=bpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:26

6. O&M #7636469 %%/*46037286*/DSP BRD:SHN=0,FN=0,SN=0,LOC=bpb;%% RETCODE = 0 Operation succeeded SEPU ---Shelf No Frame No Slot No Location Board type Chip clock source the board---= = = = = =0 0 0 Back SEPU Crystal oscillation ofCT bus clock selection SEPU board type Configuration of E1 port 0 Configuration of E1 port 1 Configuration of E1 port 2 Configuration of E1 port 3 Configuration of E1 port 4 Configuration of E1 port 5 Configuration of E1 port 6 Configuration of E1 port 7 Configuration of E1 port 8 Configuration of E1 port 9 Configuration of E1 port 10 Configuration of E1 port 11 Configuration of E1 port 12 Configuration of E1 port 13 Configuration of E1 port 14 Configuration of E1 port 15= = = = = = = = = = = = = = = = = =CLOCK_CTA SL DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME= = = = = = = = = = = = = = =0 0 1 Front SBPU Normal 4195 1024 Normal Normal 00e0fc060101 00e0fc080101 192.168.1.2 192.168.128.2 750Cformat format format format format format format format format format format format format format format formatENDMml Command-----DSP BRD:SHN=0,FN=0,SN=1,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:26 O&M #7636470 %%/*46037290*/DSP BRD:SHN=0,FN=0,SN=1,LOC=fpb;%% RETCODE = 0 Operation succeeded SBPU Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time DRAM Size Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type ---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=1,LOC=udb;

7. Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:26 O&M #7636471 %%/*46037291*/DSP BRD:SHN=0,FN=0,SN=1,LOC=udb;%% RETCODE = 0 Operation succeeded HPU 2M Board -----------Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-code0 0 1 Up-fasten SHPU 2M Normal 4227 100= = = = = = = =0 0 1 Down-fasten SHPU 64K Normal 4227 100Shelf No Frame No Slot No Location Board type Chip clock source---= = = = = = = == = = = = =0 0 1 Back SEPU Crystal oscillation ofCT bus clock selection SEPU board type Configuration of E1 port 0 Configuration of E1 port 1 Configuration of E1 port 2 Configuration of E1 port 3 Configuration of E1 port 4= = = = = = =CLOCK_CTA SL DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAMEENDMml Command-----DSP BRD:SHN=0,FN=0,SN=1,LOC=ddb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:26 O&M #7636472 %%/*46037293*/DSP BRD:SHN=0,FN=0,SN=1,LOC=ddb;%% RETCODE = 0 Operation succeeded HPU 64K Board ----------------Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-codeENDMml Command-----DSP BRD:SHN=0,FN=0,SN=1,LOC=bpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:26 O&M #7636473 %%/*46037296*/DSP BRD:SHN=0,FN=0,SN=1,LOC=bpb;%% RETCODE = 0 Operation succeeded SEPU ----the boardformat format format format format

8. Configuration of E1 port 5 Configuration of E1 port 6 Configuration of E1 port 7 Configuration of E1 port 8 Configuration of E1 port 9 Configuration of E1 port 10 Configuration of E1 port 11 Configuration of E1 port 12 Configuration of E1 port 13 Configuration of E1 port 14 Configuration of E1 port 15 ---= = = = = = = = = = =DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAMEformat format format format format format format format format format format= = = = = = = = = = = = = = =0 0 2 Front SBPE Normal 4195 1024 Normal Normal 00e0fc060102 00e0fc080102 192.168.1.3 192.168.128.3 750C= = = = = = = =0 0 2 Up-fasten SHPE Normal 4227 100ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=2,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:27 O&M #7636474 %%/*46037299*/DSP BRD:SHN=0,FN=0,SN=2,LOC=fpb;%% RETCODE = 0 Operation succeeded SBPE Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time DRAM Size Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type ---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=2,LOC=udb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:27 O&M #7636475 %%/*46037302*/DSP BRD:SHN=0,FN=0,SN=2,LOC=udb;%% RETCODE = 0 Operation succeeded SHPE Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-code ---END

9. Mml Command-----DSP BRD:SHN=0,FN=0,SN=2,LOC=ddb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:27 O&M #7636476 %%/*46037304*/DSP BRD:SHN=0,FN=0,SN=2,LOC=ddb;%% RETCODE = 0 Operation succeeded SHPE Board ----------= = = = = = = =0 0 2 Down-fasten SHPE Normal 4227 100Shelf No Frame No Slot No Location Board type Chip clock source---Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-code= = = = = =0 0 2 Back SEPU Crystal oscillation ofCT bus clock selection SEPU board type Configuration of E1 port 0 Configuration of E1 port 1 Configuration of E1 port 2 Configuration of E1 port 3 Configuration of E1 port 4 Configuration of E1 port 5 Configuration of E1 port 6 Configuration of E1 port 7 Configuration of E1 port 8 Configuration of E1 port 9 Configuration of E1 port 10 Configuration of E1 port 11 Configuration of E1 port 12 Configuration of E1 port 13 Configuration of E1 port 14 Configuration of E1 port 15= = = = = = = = = = = = = = = = = =CLOCK_CTA SL DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAMEENDMml Command-----DSP BRD:SHN=0,FN=0,SN=2,LOC=bpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:27 O&M #7636477 %%/*46037305*/DSP BRD:SHN=0,FN=0,SN=2,LOC=bpb;%% RETCODE = 0 Operation succeeded SEPU ----the board---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=3,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:28 O&M #7636478 %%/*46037309*/DSP BRD:SHN=0,FN=0,SN=3,LOC=fpb;%%format format format format format format format format format format format format format format format format

10. RETCODE = 0Operation succeededSBPE Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time DRAM Size Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type ---= = = = = = = = = = = = = = =0 0 3 Front SBPE Normal 4195 1024 Normal Normal 00e0fc060103 00e0fc080103 192.168.1.4 192.168.128.4 750C= = = = = = = =0 0 3 Up-fasten SHPE Normal 4227 100= = = = = = = =0 0 3 Down-fasten SHPE Normal 4227 100ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=3,LOC=udb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:28 O&M #7636479 %%/*46037312*/DSP BRD:SHN=0,FN=0,SN=3,LOC=udb;%% RETCODE = 0 Operation succeeded SHPE Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-code ---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=3,LOC=ddb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:28 O&M #7636480 %%/*46037316*/DSP BRD:SHN=0,FN=0,SN=3,LOC=ddb;%% RETCODE = 0 Operation succeeded SHPE Board -------------ENDShelf No Frame No Slot No Location Board type Board Status Run time Version number of micro-code

11. Mml Command-----DSP BRD:SHN=0,FN=0,SN=3,LOC=bpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:29 O&M #7636481 %%/*46037318*/DSP BRD:SHN=0,FN=0,SN=3,LOC=bpb;%% RETCODE = 0 Operation succeeded SEPU ---Shelf No Frame No Slot No Location Board type Chip clock source the board---= = = = = =0 0 3 Back SEPU Crystal oscillation ofCT bus clock selection SEPU board type Configuration of E1 port 0 Configuration of E1 port 1 Configuration of E1 port 2 Configuration of E1 port 3 Configuration of E1 port 4 Configuration of E1 port 5 Configuration of E1 port 6 Configuration of E1 port 7 Configuration of E1 port 8 Configuration of E1 port 9 Configuration of E1 port 10 Configuration of E1 port 11 Configuration of E1 port 12 Configuration of E1 port 13 Configuration of E1 port 14 Configuration of E1 port 15= = = = = = = = = = = = = = = = = =CLOCK_CTA SL DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME DOUBLEFRAME= = = = = = = = = = = = = = = =0 0 6 Front HSYS Normal 4195 512 Active Normal Normal 00e0fc060106 00e0fc080106 172.6.1.6 Not configured CN02SMUAformat format format format format format format format format format format format format format format formatENDMml Command-----DSP BRD:SHN=0,FN=0,SN=6,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:29 O&M #7636482 %%/*46037327*/DSP BRD:SHN=0,FN=0,SN=6,LOC=fpb;%% RETCODE = 0 Operation succeeded HSYS Board ---------Shelf No Frame No Slot No Location Board type Board Status Run time DRAM Size Master Info Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type

12. ---ENDMml Command-----DSP BRD:SHN=0,FN=0,SN=8,LOC=fpb; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:29 O&M #7636483 %%/*46037328*/DSP BRD:SHN=0,FN=0,SN=8,LOC=fpb;%% RETCODE = 0 Operation succeeded HSYS Board -------------Shelf No Frame No Slot No Location Board type Board Status Run time DRAM Size Master Info Network port0 status Network port1 status Network port0 MAC address Network port1 MAC address Network port0 IP address Network port1 IP address Board hardware type= = = = = = = = = = = = = = = =0 0 8 Front HSYS Normal 4195 512 Standby Normal Normal 00e0fc060108 00e0fc080108 Not configured 172.8.1.8 CN02SMUA= = = = = =0 0 16 Front ALUI 24= = =0 0 16ENDMml Command-----DSP ALUITMP:SHN=0,FN=0; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:29 O&M #7636484 %%/*46037330*/DSP ALUITMP:SHN=0,FN=0;%% RETCODE = 0 Operation succeeded ALUI Temprature --------------Shelf No Frame No Slot No Location Board type Temprature ---ENDMml Command-----DSP ALUIPOW:SHN=0,FN=0; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:30 O&M #7636485 %%/*46037333*/DSP ALUIPOW:SHN=0,FN=0;%% RETCODE = 0 Operation succeeded Power module of ALUI status ---------------------------Shelf No Frame No Slot No

13. Location Board type Power0 Power1 Power2 Power3---= = = = = = = = = =Front ALUI In-position Normal In-position Normal In-position Normal In-position Normal=NormalENDMml Command-----DSP POWER: SHN=0,CONFIRM=Y; Ne : STP02 Report : +++ HW-SG7000 2013-11-20 16:13:30 O&M #7636486 %%/*46037337*/DSP POWER: SHN=0,CONFIRM=Y;%% RETCODE = 0 Operation succeeded Query running status of power distribution box ---------------------------------------------Running status of power distribution box ---END

Hc stp02 2013-11-20

Technology

Transcript of Hc stp02 2013-11-20