Saxion HBS Expeditie. Saxion HBS Expeditie solutions for a hospitable society.
HBS SERIES SPDT 1 Amp - lvelectronics.comHBS SERIES SPDT FEATURES CONTACT RATINGS COIL DATA at 20°C...
Transcript of HBS SERIES SPDT 1 Amp - lvelectronics.comHBS SERIES SPDT FEATURES CONTACT RATINGS COIL DATA at 20°C...
HBS SERIES SPDT
FEATURES
CONTACT RATINGS
COIL DATA at 20°C
Contact Arrangement
Contact Resistance
Contact Material
Contact Rating(Resistive)
Max. Switching Voltage
Max. Switching Current
Max. Switching Power
Mechanical Life
Electrical Life
CHARACTERISTICS
DielectricStrength
Unit weight
Insulation Resistance
Between coil & contacts
Between open contacts
Humidity
Ambient temperature
Shock Resistance
Vibration resistance
1C
SiIver AIIoy(Gold Flash)
100mΩ (0.1A 6VDC)
62.5VA/30W
1A
1000MΩ (at 500VDC)
-30°C ~ +70°C
1×107 operations
1×105 operations
Approx. 2.2g
400VAC 1min
Notes:1) The data shown above are initial values.2) Please find coil temperature curve in the characteristic curved below.
98m/s2
ORDERING INFORMATION
·Small size
·Sealed Type
0.5A/125VAC, 1A/30VDC
125VAC/60VDC
35% ~ 85% RH
1000VAC 1min
Operate time (at nomi. volt.)
Release time (at nomi. volt.)
≤5ms
≤5ms
10Hz ~ 55Hz 3.3mm DA
Construction Sealed Type
Model
Coil Voltage
HBS 12 S - XXXX
S:Sensitive Type P:Standard Type
1.5
3
5
69
24
11.3
45
125
180405
2880
1.20
2.404.00
4.80
7.20
19.20
0.15
0.30
0.50
0.600.90
2.40
1.95
3.9
6.5
7.811.7
31.2
NominalVoltage
VDC
Pick-upVoltage(Max.)VDC
Drop-outVoltage(Min.)VDC
Max.AllowableVoltage
VDC
CoilResistance
Ω±10%
12 9.60 1.20 15.6 720
Standard Type
Sensitive Type
1.5
3
5
69
24
15
60
167
240540
3840
1.20
2.404.00
4.80
7.20
19.20
0.15
0.30
0.50
0.600.90
2.40
1.95
3.9
6.5
7.811.7
31.2
NominalVoltage
VDC
Pick-upVoltage(Max.)VDC
Drop-outVoltage(Min.)VDC
Max.AllowableVoltage
VDC
CoilResistance
Ω±10%
12 9.60 1.20 15.6 960
Customer code
1 Amp
File No.:E75887
RELAYS & ELECTRONICS INT'L. CORP.
This datasheet is for customers' reference. All the specifications are subject to change without notice.
Unit: inch(mm)
Outline Dimensions Wiring Diagram(Bottom view)
PCB Layout(Bottom view)
HBS SERIES SPDT
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT.
CHARACTERISTIC CURVES
Remark:1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm,tolerance should be ±0.2mm; outline dimension>1mm and ≤5mm,tolerance should be ±0.3mm;outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
COIL
Coil Power Standard Type:200mW
Sensitive Type:150mW
.49(12.5)
.39(
10)
.138
(3.5
) .02(
0.5)
.02(0.5)
.295(7.5)6-Φ.039(1)
.1(2.54) .3(7.62)
.2(5
.08)
1 Amp
MAXIMUM SWITCHING POWER
Con
tact
Cur
rent
(A)
Contact Voltage(V)
ENDURANCE CURVE
Contact Current(A)
Ope
ratio
ns (×
1000
0 O
PS
)
SAFETY APPROVAL RATINGS
UL/CUL 1A/30VDC0.3A/60VDC0.5A/125VAC
Notice:(1) To avoid using relay under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out
voltage.(2) The relay may be damaged because of falling or when shocking conditions exceed the requirement.(3) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40°C after welding, then clean it and deal with
coating, remarkably the temperature of solvents should also be controlled below 40°C. Please avoid cleaning the relay by ultrasonic,avoid using the solvents like gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.
(4) About preferable condition of operation, storage and transportation, please refer to “Relays Terminology”.
RELAYS & ELECTRONICS INT'L. CORP.
This datasheet is for customers' reference. All the specifications are subject to change without notice.