HBC Radiomatic Presentasjon Teknologidag 2014
-
Upload
roxelstavanger -
Category
Business
-
view
123 -
download
0
Transcript of HBC Radiomatic Presentasjon Teknologidag 2014
© HBC-radiomatic GmbH
HBC-radiomatic Norge A/S, Sandnes
radio control systems for industrial use
© HBC-radiomatic GmbH
Company Overview, HBC-radiomatic Germany
HBC-radiomatic Norge 23.05.2014
© HBC-radiomatic GmbH
Made in Germany
© HBC-radiomatic GmbH
HBC-radiomatic Norge A/S
© HBC-radiomatic GmbH
HBC transmitter family
© HBC-radiomatic GmbH
EX approved systems
ATEX
ATEX APPROVED
© HBC-radiomatic GmbH
NEC 500
© HBC-radiomatic GmbH
Safe working with camera assistance
•Digital or analog camera choice.
•Up to 8 analog cameras simultaneously.
•Nearly instantaneous feedback with analog camera.
•Day or night use.
•Battery or cable powered
radiomatic ® photon
© HBC-radiomatic GmbH
More information, more safety, more comfort
This option enables the indication of valuable crane or machine information, error messages and warning on the control panel.
Feedback by LED:•Status or error notifications, warnings.
•Available for patrol S / D, quadrix, keynote, vector pro, micron 5, eco, technos, technos 2 and the spectrum series.
Feedback by vibration of the transmitter:•Status or error messages, warnings.•Available for für radiomatic® pilot, micron 5 / 7, eco, technos 2
and the spectrum series.
Feedback via LCD / TFT:•Full graphical display.•Easy customization.•Most diverse feedback information available, such as weight and measuring data, height of hook, load weight.•Warnings, error messages.•Available for micron 6 / 7, technos, technos 2,
spectrum A / B / D / 3 / E.
Feedback
Feedback by LED.
Feedback by LCD.
Feedback by 3,5″-TFT.
© HBC-radiomatic GmbH
radiomatic® shock-off / roll-detect / zero-g
In specific emergency situations, these safety features can prevent unintended movement commands from being given to the crane / machine, protecting the operator as well as other personnel in close proximity to the crane / machine in use.
• radiomatic® shock-off can activate if the transmitter receives a hard impact.
• radiomatic® roll-detect can activate if the transmitter is unintentionally rolled.
• radiomatic® zero-g can activate in the event that the transmitter is dropped or thrown.
Depending on the ordered versions, the features can operate in three different ways:
• The complete radio system is shut down.• Safety-relevant functions are de-activated. • A previously defined function (e.g. crane horn) is activated.
Suitable transmitters:radiomatic® pilot, quadrix, keynote, vector pro, micron 5 / 6 / 7,
eco, linus 4 / 6, technos, technos 2 and the spectrum series(except spectrum EEX).
Safety features
radiomatic® shock-off radiomatic® roll-detect
radiomatic® zero-gradiomatic® zero-g
© HBC-radiomatic GmbH
radiomatic ® report: user identification
The intelligent card for more safety and information
•User identification is based on a handy login-card (HBC Smart Card). With its key function it protects the control from unauthorized use.
•At the same time it enables the identification of the user and the personalization of the radio control.
•Thus safety-relevant functions can be limited to authorized personnel only.
•In combination with an HBC data logger, the function offers numerous advantages for the operators of the system:
The radio system can store various operational data for each user, such as the operating hours of the radio system or the number of drive commands given.
•These pieces of information can be very useful when service questions arise.
•User identification is available for radiomatic® pilot, quadrix, keynote, micron 5 / 7, linus 4, eco, technos 2 and the
spectrum series (except spectrum EEX).
© HBC-radiomatic GmbH
radiomatic ® report
Efficient access management, collection of valuable data
•radiomatic® report stands for an innovative concept that supports the easy and efficient management of access rights to diverse machinery, as well as for the collection of valuable operational data of HBC radio control systems.
•radiomatic® report encompasses three key elements:
the user identification by HBC Smart Card.
the HBC data logger.
a complementary self-contained unit that extends these functions beyond radio controls.
© HBC-radiomatic GmbH
radiomatic ® report: HBC data logger
The HBC data logger.
Useful information at your disposal
•The HBC data logger stores different operational data of machine utilization, for example the usage time of drive functions.
•It can be used separately or in combination with the HBC user identification. In this combination, data are collected individually for each user. Then it is easy to determine how long the crane was used by which user and with which functions the user has worked.
•In addition, it is also possible to calculate the loads carried by individual cranes.
•The collected data can be helpful in various situations, for example in service cases.
•The data are read out via a Bluetooth® interface and are visualized with a newly developed software.
•The HBC data logger is available for all HBC radio systems with CAN interface.
© HBC-radiomatic GmbH
radiomatic ® report: self-contained unit
Valuable features now available without radio system
•The complimentary self-contained unit of radiomatic® report allows to benefit from valuable radiomatic® report functions even if there is no radio control installed on the machine.
•The innovation is directly connected to the machine electronics.
•In order to start the machine, the operator has to hold a suitable HBC Smart Card in front of the activated device. The operator can then control the machine as usual. This clever feature protects the machine from unauthorized use.
•In addition, the individual configuration of the HBC Smart Cards allows for the organization of company-internal access rights to machines without much effort.
•Optionally, this version of radiomatic® report can be connected to a HBC data logger. It is integrated directly into the device and offers the exact, user-specific collection of all login times.
The self-contained unit of radiomatic® report.
© HBC-radiomatic GmbH
Front panel lighting
• With the innovative front panel lighting, the operator can clearly read and locate all functions, at any time, under working conditions with limited light.
• When necessary, the operator simply switches on multiple LEDs, which are integrated into the rollover bar, with a switch or button on the transmitter.
• The operating elements are immediately visible again and potential dangers resulting from incorrect operation of the radio control, based on poor visibility, can now be prevented.
• This function is available for the spectrum transmitters.
Safety features
© HBC-radiomatic GmbH
New operating concept (I): Control of 2 analog or single-/two-step
drives by horizontal / vertical inclination of the transmitter.
Release button for activating the release function.
HBC micro joystick for the control of 2 additional analog or single-/two-step drives; optionally version without joystick for applications with 2 drives.
intuitive single-hand control of up to 4 drives.
Release button. HBC micro joystick.
Crane / machine control by hand movements.
radiomatic® pilot: concept
© HBC-radiomatic GmbH
• LCD for indication of feedback and / or system data.
• 2 joysticks with 2 to 6 steps or analog or 6 linear levers.
• Various push buttons, toggle or rotary switches (maintained / spring-return).
• STOP impact switch.
• LEDs for indication of feedback / system information.
• radiomatic® iCON for display navigation and customer-specific settings.
• radiomatic® iLOG for the quick activation of a spare transmitter.
spectrum A: technical details (1)
Version for industrial cranes.
Integrated display for feedback / system data.
© HBC-radiomatic GmbH
Superb quality with 3.5″
color TFT
spectrum D
© HBC-radiomatic GmbH
Unlimited possibilities
spectrum E
© HBC-radiomatic GmbH
spectrum 3 for Ex zone 1 or 2.
spectrum 2 with acid-resistant Gravoply® front
panel.
spectrum 1 with dead-man-switch and numerous additional
operating elements.
More than 30 basic models + countless operating elements / features = unlimited possibilities.
spectrum 3 with diverse customer-specific operating elements.
OEM version for harbor cranes.
patrol S with rotary potentiometer.
vector pro with enable switch.
Customer-specific products
© HBC-radiomatic GmbH
Tailor-made radio technology for mobile
hydraulic applications
FSE 727 radiobus®
© HBC-radiomatic GmbH
Thank You