HB Arc & Energy 2013

Michael Trippen, International Purchase:

BLOUSON: INDURA® CANVAS

Part number: 01131 10107 022 3030

ARC & ENERGYWhen strong electric forces are present, there is little time to react. HB Schutzbekleidung relies on working with the maximum quality possible and the most intensive test methods to protect persons against Electric Arc Incidents – and to prevent garments from catching fire even after contact with an Electric Arc.

HB SCHUTZBEKLEIDUNG 17

ARC

& EN

ERGY

// ARC & ENERGY

18 HB SCHUTZBEKLEIDUNG

HABETEX® MULTISAFE II FC

Wristband and let-in piece adjustable with buttons

Characteristics

Must be re-impregnated after each washing.

Fields of application

Welder protection, heat-exposed work, electro-static properties, heat and flame protection, fault arc.

MATERIAL HABETEX® MULTISAFE II, FC EQUIPMENT // 75% COTTON, 24% POLYESTER, 1% CARBON

Standards

DIN EN 1149-5DIN EN ISO 11611 Class 1 A1+A2

DIN EN 61482-1-2 Class 1

All-round improvement: HB Schutzbekleidung offers the proven multifunctional mixed fabric in a re-engineered and shrinkage-optimised version. The cut has also been improved, thereby also enhancing the wearer comfort of the collection; the trousers now have an additional leg pocket. These versatile products are particularly suitable for protection against liquid iron.

Turn-down collarClosure band with

covered buttons

DIN EN ISO 11612 A1+A2/B1/C1/E2/F1

STANDARDS

DIN EN 13034 Type 6


ARC

& EN

ERGY

WORK JACKET////////////////////////////////////////

Three-coloured; front and back yoke with piping; turn-down col-lar; closure band with covered buttons; 2 front pockets and 2 side pockets, each with flaps and covered buttons; wristbands and let-in piece adjustable with buttons; HB logo as direct em-broidery on the back.

Material HABETEX® MULTISAFE II, FC EQUIPMENT

Fabric weight approx. 350 g/m2

Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/E2/F1, DIN EN ISO 11611 Class 1 A1+A2, DIN EN 1149-5, DIN EN 13034 Type 6

Part number 01128 10105 017 3026

Size 44 – 64 & 94 – 110

Colour navy/medium grey/red

Wearing comfort

Industrial washing

TROUSERS////////////////////////////////////////

Single-coloured; added waistband with 7 belt loops; button fly; 2 slant pockets; hip pocket on the right with flap and covered button; 1 ruler pocket on the right with flap and covered button, flap opening towards front trousers closed by bellows; 1 pouch pocket with bellows on the back and flap with covered button; HB logo as direct embroidery on ruler pocket.



Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/E2/F1,

DIN EN ISO 11611 Class 1 A1+A2, DIN EN 1149-5, DIN EN 13034 Type 6

Part number 01128 20060 009 48

Size 44 – 64 & 94 – 110

Colour navy

Wearing comfort

Industrial washing

Hip pocket with flap and covered button

Back yoke with piping

Added waistband with 7 belt loops

Additional leg pocket Cargo width

// ARC & ENERGY


HABETEX® MULTISAFE II FC

Characteristics

Should be re-impregnated after each washing.


Welder protection, heat-exposed work, electro-static properties, heat and flame protection, Electric Arc Incidents.

MATERIAL HABETEX® MULTISAFE II, FC EQUIPMENT // 75% COTTON, 24% POLYESTER, 1% CARBON

Standards

2 front pockets

Snap fastener covered on both sides

Leg pocket Knee padding pocket with Velcro fastener

DIN EN 1149-5DIN EN ISO 11611 Class 1 A1+A2


DIN EN ISO 11612 A1+A2/B1/C1/E2/F1

DIN EN 13034 Type 6


ARC

& EN

ERGY

DUNGAREES////////////////////////////////////////

Three-coloured; stretch braces with clamp-on clips; button fly; bib with rounded border with piping and outer pocket with flap and covered button; 2 slant pockets; 1 hip pocket on the right with flap and covered button; 1 ruler pocket on the right with flap and covered button; flap opening towards front trousers closed by bellows; 1 leg pocket with bellows on the back and flap with covered button; side access on the left with buttoning; HB logo as direct embroidery on ruler pocket.



Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/E2/F1, DIN EN ISO 11611 Class 1 A1+A2, DIN EN 1149-5, DIN EN 13034 Type 6

Part number 01128 50041 037 3026

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

OVERALL////////////////////////////////////////

Three-coloured; turn-down collar; closure band with covered snap fasteners on both sides; 2 front pockets, 2 piping side pockets with integrated pass-through, 1 hip pocket on the right, 1 ruler pocket on the right and 1 leg pocket on the left with bellows on back, each with flap and covered snap fasteners; front and back yoke with piping; wristband with covered snap fasteners; knee padding pockets with opening at bottom and height-adjus-table via Velcro fastener.



Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1 A1+A2, DIN EN 1149-5, DIN EN 13034 Type 6

Part number 01128 30014 004 3026

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

Ruler pocket

// ARC & ENERGY


INDURA® ULTRASOFT®

Characteristics

Permanently flame-retardant over whole service life, low shrinking during washing, extraordinary protection against Electric Arc Incidents.


Welder protection, heat-exposed work, liquid metals, Electric Arc Flash.

MATERIAL INDURA® ULTRASOFT® // 88 % COTTON, 12% POLYAMIDE

Standards

DIN EN ISO 11612 A1+A2/B1/C1/E3

DIN EN ISO 11611 Class 1 A1+A2


The flame-retardant cotton fabric offers an extraordinarily soft grip. INDURA® UltraSoft® collection articles offer efficient protection against Electric Arc Incidents as well as against liquid metals and flames.

STANDARDS


ARC

& EN

ERGY

SHIRT////////////////////////////////////////

Single-coloured; Shirt design based on denim look: 2-needle stitching with contrast colour; 2-part collar with collar band; HB turtle as direct embroidery in back part below collar base; Closure band with covered snap fasteners on both sides; 1 front pocket on the left with flap and snap fasteners; wristband with let-in piece and covered snap fasteners; standard pictograms as direct embroidery on left cuff; back part with movement pleats; side seam with hem vent.

Material INDURA® ULTRASOFT®


Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/E1/F1, DIN EN ISO 11611 Class 1 A1+A2

ATPV value 8,7 cal/cm2

Part number 01055 60014 002 + colour no.

Size 35/36 – 59/60

Colour orange 22 royal 41 navy 45 medium grey 52Wearing comfort

Industrial washing

// ARC & ENERGY


INDURA® ULTRASOFT®

Characteristics

Permanently flame-retardant over whole service life, extraordinary protection against Electric Arc Incidents.


Welder protection, heat-exposed work, liquid metals, Electric Arc Flash.

MATERIAL INDURA® ULTRASOFT® // 88 % COTTON, 12% POLYAMIDE

Standards

DIN EN ISO 11612 A1+A2/B1/C1/E3



STANDARDS

WORK JACKET////////////////////////////////////////

Three-coloured; front and back yoke with piping; turn-down col-lar; Closure band with covered snap fasteners on both sides; 2 front pockets and 2 side pockets, each with flaps and covered snap fasteners; wristband with let-in piece and adjustable co-vered snap fastener.



Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/E3, DIN EN ISO 11611 Class 1 A1+A2


Part number 01063 10049 000 2027

Size 44 – 64 & 94 – 110

Colour royal/navy/red

Wearing comfort

Industrial washing

Waistbands with covered snap fasteners

Foto fehlt


ARC

& EN

ERGY

Ruler pocket with covered snap fastener

Side seam pocket

DUNGAREES////////////////////////////////////////

Three-coloured; stretch braces with clamp-on clips; button fly; bib with rounded border with piping and outer pocket with flap and covered snap fasteners; 2 side seam pockets with covered snap fasteners, 1 hip pocket on the right and 1 ruler pocket on the right each with flap and covered snap fastener; side access on the left with buttoning; additional knee reinforcement.





Part number 01063 50002 016 2027

Size 44 – 64 & 94 – 110

Colour royal/navy/red

Wearing comfort

Industrial washing

TROUSERS////////////////////////////////////////

Single-coloured; added waistband with 7 belt loops; button fly; 2 side seam pockets; 1 hip pocket on the right and 1 ruler pocket on the right with flap and covered snap fastener; additional knee reinforcement.




ATPV Value 13,5 cal/cm2

Part number 01063 20029 000 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing

// ARC & ENERGY


INDURA® ULTRASOFT® ANTISTATICPerfect for EX areas: the INDURA® UltraSoft® antistatic cotton fabric combined flame-retardant and antistatic properties and protects against fault arcs. The soft grip ensures high wearing comfort despite higher weight of material.

MATERIAL INDURA® ULTRASOFT® ANTISTATIC // 87 % COTTON, 12% POLYAMIDE, 1% CARBON

Characteristics

Permanently flame-retardant over whole service life, very good protection against Electric Arc Incidents, antistatic.


Electrostatic properties, heat-exposed work, liquid metals, Electric Arc Flash.

Standards

DIN EN 1149-5DIN EN ISO 11611 Class 1-A1+A2


DIN EN ISO 11612 A1+A2/B1/C1/F1

Mobile phone pocket inside of left front pocket

High band collar

3M reflective film Art. 8940, suitable forleasing

STANDARDS


ARC

& EN

ERGY

BLOUSON////////////////////////////////////////

Two-coloured; front part and sleeve as 1-ply or 2-ply version; front and back yoke with flame-retardant reflective film suitable for leasing; high band collar; closure band with covered 2-way PVC zip fastener and covered snap fasteners; 2 front pockets and 2 side pockets, each with flap and covered snap fasteners; 1 mobile phone pocket inside of left front pocket, height-adjus-table; 1 inner pocket on the right with Velcro fastener; added waistband with elastic band in back part; wristband with covered snap fasteners.

Material INDURA® ULTRASOFT® ANTISTATIC 1-PLY


Standards DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1-A1+A2, DIN EN 1149-5, DIN EN 61482-1-2 Class 1





Standards DIN EN 61482-1-2 Class 2 (in the area of front part and sleeve), DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1-A1+A2, DIN EN 1149-5



Size 44 – 64 & 94 – 110

Colour medium grey/red 2071 navy/royal 2041Wearing comfort

Industrial washing

Front part and sleeve available as 1-ply or 2-ply version (Electric Arc Flash 4 kA or 7 kA)

Back part with elastic waistband

// ARC & ENERGY


INDURA® ULTRASOFT® ANTISTATIC STANDARDS

TROUSERS////////////////////////////////////////

Single-coloured; front trousers 1-ply or 2-ply; added waistband with 7 belt loops; metal zip fly; 2 slant pockets; 1 hip pocket with flap; 1 double ruler pocket on the right; 1 leg pocket with bellows on the back and flap with covered snap fasteners; flame-retar-dant reflective film at leg, suitable for leasing.



Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1-A1+A2, DIN EN 1149-5




Fabric weight ca. 340 g/m2

Standards DIN EN 61482-1-2 Class 2 (in area of front trousers), DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1-A1+A2, DIN EN 1149-5



Size 44 – 64 & 94 – 110


Industrial washing

Double ruler pocket

Leg pocket with flap and covered

snap fasteners

Front trousers available as 1-ply or 2-ply version (Electric Arc Flash 4 kA or 7 kA)


ARC

& EN

ERGY

DUNGAREES////////////////////////////////////////

Two-coloured; front trousers 1-ply or 2-ply; stretch braces with fix-lock clips; high-cut kidney protection; metal zip fly; bib with outer pocket and flap with covered snap fasteners; 2 slant po-ckets; hip pocket with flap; 1 double ruler pocket on the right; 1 leg pocket with bellows on the back and flap with covered snap fasteners; 2 side accesses with adjustment via buttons; flame-retardant reflective film at legs and bib, suitable for leasing.



Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1-A1+A2, DIN EN 1149-5





Standards DIN EN 61482-1-2 Class 2 (in area of front trousers), DIN EN ISO 11612 A1+A2/B1/C1/F1, DIN EN ISO 11611 Class 1-A1+A2, DIN EN 1149-5



Size 44 – 64 & 94 – 110


Industrial washing

High-cut kidney protection

3M flame-retardant reflective film Art. 8940

Front trousers available as 1-ply or 2-ply version (Electric Arc Flash 4 kA or 7 kA)

// ARC & ENERGY


INDURA® CANVASThis modern and very stable fabric offers maximum protection with many hazardous situations – from Electric Arc Incidents and effects of flames, heat and sparks to use in connection with welding systems, liquid metal and chemicals. Furthermore, it offers contemporary design and high wearing comfort.

BLOUSON////////////////////////////////////////

Three-coloured; design with round shapes; 2-needle stitching with contrast colour off-white; standard pictograms as direct embroidery on left front part hem; band collar with covered snap fasteners; closure band with PVC zip fastener and covered snap fasteners; 2 side pockets, lockable via PVC zip fastener; 2 front pockets (as mobile phone pocket on the right) with flap and covered snap fasteners; added waistband; shaped elbow with dart; movement pleats on back part; flame-retardant reflective piping in yoke separation, suitable for leasing or renting. HB logo as direct embroidery on back part.





Part number 01131 10107 022 3030

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

Characteristics

Permanently flame-retardant over whole service life, multitude of application fields thanks to Multi Standards function, very high wearing comfort, comfortable fit.

MATERIAL INDURA® CANVAS // 87% COTTON, 12% POLYAMIDE, 1% CARBON

Standards

DIN EN 13034Type 6

DIN EN 1149-5 DIN EN ISO 11612 A1+A2/B1/C1/F1



STANDARDS

Movement pleat


ARC

& EN

ERGY

DUNGAREES////////////////////////////////////////

Three-coloured; design with round shapes; 2-needle stitching with contrast colour off-white; standard pictograms as direct embroidery on flap on the left; stretch braces with fix-lock clip; bib with outer pocket and flap with covered snap fasteners; zip fly; access via knitted elements on both sides; waist with 6 belt loops; 2 slant pockets; 1 ruler pocket on the right; 1 double pocket on left leg with flap and covered snap fasteners; shaped knee with dart; inner knee padding pockets with opening at bottom; flame-retardant reflective piping, suitable for leasing or renting; HB logo as direct embroidery on right back trousers.





Part number 01131 50052 000 3030

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

TROUSERS////////////////////////////////////////

Three-coloured; design with round shapes; 2-needle stitching with contrast colour off-white; standard pictograms as direct embroidery on flap on the left; added waistband with 7 belt loops and covered button; zip fly; 2 slant pockets; 1 ruler pocket on the right; 1 double pocket on left leg with flap and covered snap fasteners; shaped knee with dart; knee padding pockets with opening at bottom; flame-retardant reflective piping in yoke separation of back trousers, suitable for leasing or renting; HB logo as direct embroidery on right back trousers.





Part number 01131 20069 000 3030

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

Reflective piping in yoke seam

Leg pocket with bellows and attached mobile phone pocket

// ARC & ENERGY


NOMEX® VISCOSELow weight and high protection: NOMEX® Viscose combines high wearing comfort, reliable protection and antistatic properties.

BLOUSON////////////////////////////////////////

Two-coloured; front part partially with 2-ply design; front/back part and sleeve separation with flame-retardant reflective pi-pings, suitable for leasing or renting; high band collar with strap and Velcro fastener; closure band with covered PVC zip fastener and covered Velcro fasteners; 2 front pockets and 2 side pockets, each with flap and covered Velcro fasteners; 1 inner mobile pho-ne pocket on the right and 1 inner pocket on the left, each with Velcro fastener; attached waistband with elastic band in side parts; wristband with let-in piece and covered snap fasteners.

Material NOMEX® VISCOSE

Fabric weight approx. 260g g/m2

Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1/B1/C1, DIN EN ISO 11611 Class 1-A1, DIN EN 1149-5


Part number 01031 10036 005 2030

Size 44 – 64 & 94 – 110

Colour royal/navy

Wearing comfort

Industrial washing

Characteristics

High resistance, very stable, antistatic, welder protection.


Welder protection; heat-exposed work, Electric Arc Incidents; electrostatic properties.

MATERIAL NOMEX® VISCOSE // 50% VISCOSE, 49% ARAMIDE, 1% CARBON

Standards

DIN EN 1149-5DIN EN ISO 11612 A1/B1/C1

DIN EN ISO 11611 Class 1 A1


Closure band with covered PVC zip fastener

Inner mobile phone pocket with Velcro fastener

STANDARDS


ARC

& EN

ERGY

Ruler pocket with flap

Bellow pocket with flap

TROUSERS////////////////////////////////////////

Two-coloured; added waistband with covered button, lateral elastic bands and 8 belt loops; metal zip fly; 2 slant pockets; 1 hip pocket on the right with flap; 1 ruler pocket on the right with flap; 1 bellow pocket on left leg with flap and Velcro fastener; inner knee padding pockets, 2-fold adjustable with opening at bottom; flame-retardant reflective film at leg, suitable for lea-sing or renting, as well as reflective pipings at flaps.





Part number 01031 20022 010 2030

Size 44 – 64 & 94 – 110

Colour royal/navy

Wearing comfort

Industrial washing

DUNGAREES////////////////////////////////////////

Two-coloured; stretch braces with fix-lock clips; high-cut kidney protection; metal zip fly; bib with outer pocket, ball-pen com-partment and flap; 2 slant pockets; 2 hip pockets on the right with flap; 1 ruler pocket on the right with flap; 1 bellow pocket on left leg with flap; all flaps additionally with covered Velcro fastener; 1 side access on the left with adjustment via buttons; inner knee padding pockets with opening at bottom and 2-fold adjustment; 2 flame-retardant reflective films at legs, suitable for leasing or renting, and reflective pipings at bib and flaps.





Part number 01031 50026 007 2030

Size 44 – 64 & 94 – 110

Colour royal/navy

Wearing comfort

Industrial washing

// ARC & ENERGY


NOMEX® COMFORTNOMEX® Comfort is characterised by extraordinarily high flame proofing properties. Thanks to the low material weight, the fabric also offers high mobility even in very dangerous workplaces. The high carbon content ensures that charges are discharged by means of induction so that the clothing is also well suited for electricians.


Electrostatic properties; heat-exposed work; Electric Arc Flash.

MATERIAL NOMEX® COMFORT // 98 % ARAMIDE, 2 % CARBON

Standards

DIN EN 61482 Class 1

DIN EN ISO 11612 A1/B1/C1/F1

DIN EN 1149-5

BLOUSON////////////////////////////////////////

Single-coloured; turn-down collar; closure band with covered snap fasteners on both sides; 1 front pocket on the left with flap and covered snap fastener; 1 inner front pocket on the left with flap and snap fasteners; sleeve hem width adjustable via snap fasteners, covered inwards; added waistband; HB logo as direct embroidery on back part on the right bottom.

Material NOMEX® COMFORT


Standards DIN EN 61482 Class 1, DIN EN ISO 11612 A1/B1/C1/F1,

DIN EN 1149-5


Part number 01042 10011 001 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing

Characteristics

Fibre-inherent flame-retardant, antistatic, high protective effect with low fabric weight, increased humidity transport thanks to hydrophilic equipment (applies to 01046 models).

Front pocket with flap and covered snap fastener

Inner front pocket with flap and snap fasteners


ARC

& EN

ERGY

WORK JACKET////////////////////////////////////////

Single-coloured; turn-down collar; closure band with covered snap fasteners on both sides; 1 front pocket on the left with flaps and 2 piped pockets with covered pocket mouths, all with co-vered snap fasteners; 1 inner front pocket on the left; sleeve hem width adjustable via snap fasteners, covered inwards; HB logo as direct embroidery on back part on the right bottom.



Standards DIN EN 61482 Class 1, DIN EN ISO 11612 A1/B1/C1/F1, DIN EN 1149-5


Part number 01042 10003 001 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing

MAN'S COAT////////////////////////////////////////

Single-coloured; lapel collar, highly closed and open wearing; closure band with covered snap fasteners on both sides; 1 front pocket on the left and 2 side pockets, each with flap and covered snap fastener; 1 inner front pocket on the right; sleeve with hem width adjustment via covered snap fasteners.





Part number 01042 40002 002 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing

// ARC & ENERGY


NOMEX® COMFORT

TROUSERS////////////////////////////////////////

Single-coloured; added waistband with 7 belt loops; 2 side seam pockets; 1 hip pocket on the right with flap and snap fasteners; 1 ruler pocket on the right; button fly; HB logo as direct embro-idery on ruler pocket.





Part number 01042 20003 006 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing

DUNGAREES////////////////////////////////////////

Single-coloured; stretch braces with clamp-on clips; straight-cut kidney protection; 1 outer bib pocket with snap fastener; 2 side seam pockets with covered snap fastener; 1 hip pocket on the right with flap and covered snap fastener; 1 ruler pocket on the right; 1 side access on the left with buttoning; button fly.





Part number 01042 50002 012 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing


ARC

& EN

ERGY

SHIRT////////////////////////////////////////

Single-coloured; turn-down collar with added collar band; clo-sure band with buttons; 1 front pocket on the left; wristband with buttoning; HB logo as direct embroidery centrally on back below collar.



Standards DIN EN ISO 11612 A1/B1/C1/F1, DIN EN 1149-5


Part number 01046 60000 008 41

Size 37/38 – 51/52

Colour royal

Wearing comfort

Industrial washing

Foto fehlt

OVERALL////////////////////////////////////////

Single-coloured; turn-down collar, closure band with covered snap fasteners on both sides; 1 front pocket on the left, 1 side pocket on the left and 1 pocket pass-through on the left, all with covered snap fastener; 1 ruler pocket on the right; elastic waistband all round; sleeve with hem width adjustment via snap fastener, covered inwards; HB logo as direct embroidery on ruler pocket.





Part number 01042 30017 001 41

Size 44 – 64 & 94 – 110

Colour royal

Wearing comfort

Industrial washing

// ARC & ENERGY


INOTEC® ARC & ENERGYINOTEC® Arc & Energy offers very good flame proofing properties and high mobility due amongst other things to the low material weight. The high carbon amount in the fabric ensures that charges are discharged by means of induction so that the clothing is also perfectly suitable for electricians. A clever and stylish cut completes the collection.



MATERIAL NOMEX® COMFORT // 98% ARAMIDE, 2% CARBON

StandardsCharacteristics

Fibre-inherent flame-retardant, antistatic, high protection with low fabric weight.

DIN EN 1149-5



DIN EN ISO 11612 A1 /B1 /C1 /F1


ARC

& EN

ERGY

JACKET////////////////////////////////////////

Two-coloured; turn-down collar; closure band with covered buttons; 2 front pockets and 2 side pockets, each with flaps and Velcro fasteners; 1 inner front pocket on the left with Velcro fastener; middle back with movement pleat; yoke and sleeve separation with flame-retardant reflective piping, suitable for leasing or renting; back with flame-retardant reflective film, suitable for leasing or renting; wristband with let-in piece and strap with adjustable Velcro fastener; HB logo as direct embroidery on back, on the right above the hem.

Material NOMEX® COMFORT 1-PLY


Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1/B1/C1/F1, DIN EN 1149-5


Part number 01042 10105 014 2034

Material NOMEX® COMFORT 2-LAGIG


Standards DIN EN 61482-1-2 Class 2 (in the area of front part and sleeve), DIN EN ISO 11612 A1/B1/C1/F1, DIN EN 1149-5

Part number 01042 10105 015 2034

Size 44 – 64 & 94 – 110

Colour royal/navy-blue

Wearing comfort

Industrial washing

Vertical movement pleat with integrated flame-retardant 3M reflective film, suitable for leasing Art. 8940

Front part and sleeve available as 1-ply or 2-ply version

(Electric Arc Flash protection to 4 kA or 7 kA)

// ARC & ENERGY


INOTEC® ARC & ENERGY

Hip pockets with flaps and Velcro fasteners

Double ruler pocket



MATERIAL NOMEX® COMFORT // 98 % ARAMIDE, 2 % CARBON

StandardsCharacteristics

Fibre-inherent flame-retardant, antistatic, high protective effect with low fabric weight.

DIN EN 1149-5



DIN EN ISO 11612 A1 /B1 /C1 /F1


ARC

& EN

ERGY

DUNGAREES////////////////////////////////////////

Two-coloured; stretch braces with fix-lock clips; high-cut, straight kidney protection; 1 outer bib pocket with flap and Velcro faste-ner; 2 slant pockets; 2 hip pockets and 1 leg pocket on the left, each with flap and Velcro fastener; 1 mobile phone pocket in left leg pocket with bellows and variable height adjustment via Velcro fastener; 1 double ruler pocket on the right; 1 side access on the left adjustable via buttons; covered button fly; legs with 2 flame-retardant reflective films, suitable for leasing or renting, as well as reflective piping at bib flap; HB logo as direct embroidery on ruler pocket.





Part number 01042 50041 034 2034



Standards DIN EN 61482-1-2 Class 2 (in area of front trousers), DIN EN ISO 11612 A1/B1/C1/F1, DIN EN 1149-5

Part number 01042 50041 035 2034

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

TROUSERS////////////////////////////////////////

Two-coloured; added waistband with 7 belt loops; 2 slant po-ckets; 2 hip pockets with flap and Velcro fastener; 1 doub-le ruler pocket on the right; 1 leg pocket on the left with flap and Velcro fastener; bellow on the back; 1 mobile phone pocket in left leg pocket with bellows and variable height ad-justment via Velcro fastener; covered button fly; back trousers with yoke seam; legs with 2 flame-retardant reflective films, suitable for leasing or renting, as well as reflective piping at yoke seam; HB logo as direct embroidery on ruler pocket.





Part number 01042 20060 006 2034



Standards DIN EN 61482-1-2 Class 2 (in area of front trousers), DIN EN ISO 11612 A1/B1/C1/F1, DIN EN 1149-5

Part number 01042 20060 007 2034

Size 44 – 64 & 94 – 110


Wearing comfort

Industrial washing

Front trousers available as 1-ply or 2-ply version (Electric Arc Flash protection to 4 kA or 7 kA)

Front trousers available as 1-ply or 2-ply version

(Electric Arc Flash protec-tion to 4 kA or 7 kA)

// ARC & ENERGY


INDURA® ULTRASOFT® KNITINDURA® UltraSoft® knit combines flame proofing and high wearing comfort and correspondingly represents the perfect underwear for FR suits. Being a part of an efficient FR system, the articles of this collection are suitable for flame-endangered work areas as well as for EX (explosion protection) areas.

POLO SHIRT FR LONG-SLEEVED////////////////////////////////////////

Two-coloured, shirt design and cut based on denim look; 2-needle stitching with contrast colour; polo placket as colour version with covered snap fasteners; standard pictograms as direct embroidery in contrast colour.

Material INDURA® ULTRASOFT® KNIT


Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1/B1/C1



Size Unisex XS – XXXL

Colour navy/red 2040 navy/medium grey 2043Wearing comfort

Industrial washing

Characteristics

Permanently flame-retardant over whole ser-vice life, very good protection against Electric Arc Incidents, high wearing comfort.


Comfortable underwear with high protec-tive effect, heat-exposed work, Electric Arc Flash.

MATERIAL INDURA® ULTRASOFT® KNIT // 88% COTTON, 12% POLYAMIDE

Standards

DIN EN ISO 11612 A1/B1/C1


polo fastener with covered snap fasteners


ARC

& EN

ERGY

T-SHIRT FR LONG-SLEEVED////////////////////////////////////////

Two-coloured, shirt design and cut based on denim look; 2-needle stitching with contrast colour; standard pictograms as direct embroidery in contrast colour.

Material INDURA® ULTRASOFT® KNIT


Standards DIN EN 61482-1-2 Class 1, DIN EN ISO 11612 A1/B1/C1



Size Unisex XS – XXXL

Colour orange 22 navy 45

silver 50

Wearing comfort

Industrial washing

HB Arc & Energy 2013

Documents

Transcript of HB Arc & Energy 2013