1

HAZARDOUS AREA WIRING TRAINING

-BOOK YOUR HAZARDOUS AREA WIRING TRAINING HERE-

BY PHONE OR FAX

Ph: (+613) 5133 7174 Fax: (+613) 5133 7831

BY E-MAIL

E-Mail Address: trainingco@optec.com.au

BY MAIL

PO BOX 115, MORWELL VIC 3840

2 CHURCH ST, MORWELL VIC 3840

Web Page: http://www.optec.com.au

2

HAZARDOUS AREA WIRING INITIAL TRAINING This course is a nationally recognised course intended for electrical workers, technicians and engineers involved with installing and maintaining electrical equipment in hazardous areas. It covers the principles of hazardous area classification, explosion protection techniques, equipment installation requirements, inspections, and procedures for breakdowns and maintenance, with theory and practical components.

The skills and knowledge described in this training course require a license to practice in the workplace for undertaking electrical work as required by the various state and territory electricity safety acts and associated regulations. Prerequisites: Certificate III in Electrotechnology Electrician, Certificate III in Instrumentation & Control, Certificate III in Engineering Production Control (with Unit MEM07001B) or Certificate III in Process Plant Operations (with Unit PMAOPS201B) or equivalent for award of Statement of Attainment. Apprentice electricians or candidates with tertiary electrical qualifications are eligible for award of Statement of Completion.

Hazardous Area Initial Training for the following competencies at Certificate IV:

UEENEEM080A - Report on the integrity of explosion-protected

equipment in hazardous areas.

UEENEEM019A/20A/21A/22A - Attend to breakdowns in hazardous areas.

UEENEEM023A/24A/25A/26A - Install explosion-protected equipment and

wiring systems.

UEENEEM027A/28A/29A/30A - Maintain equipment in hazardous areas.

UEENEEM038A/39A/40A/41A - Conduct testing of Hazardous Areas

installations

UEENEEM042A - Conduct visual inspection of

hazardous areas installations.

UEENEEM043A/44A/45A/46A - Conduct detailed inspection of hazardous

areas installations.

Course Duration: 5 Days

Competency Outcomes: Upon successful completion of this course a Statement of

Attainment will be issued.

3

HAZARDOUS AREA WIRING REFRESHER TRAINING

This refresher course is intended for electrical and non-electrical participants who are required to attend a refresher program for hazardous area competencies already gained. The refresher program is intended to bring current electrical and non-electrical participants who have been previously trained in hazardous areas up to date on any changes to hazardous area standards and legislation. It is recommended that electricians attend a refresher course for relevant hazardous area competencies no less than every two years.

Prerequisites: Prior completion of 5 day initial course

Hazardous Area Refresher Training for the following competencies at

Certificate IV:

UEENEEM080A - Report on the integrity of explosion-protected

equipment in hazardous areas.

UEENEEM019A/20A/21A/22A - Attend to breakdowns in hazardous areas.

UEENEEM023A/24A/25A/26A - Install explosion-protected equipment and

wiring systems.

UEENEEM027A/28A/29A/30A - Maintain equipment in hazardous areas.

UEENEEM038A/39A/40A/41A - Conduct testing of Hazardous Areas

installations

UEENEEM042A - Conduct visual inspection of

hazardous areas installations.

UEENEEM043A/44A/45A/46A - Conduct detailed inspection of hazardous

areas installations.

Course Duration: 1 Day

Competency Outcomes: Upon successful completion of this course a Certificate of

completion will be issued.

4

HAZARDOUS AREA WIRING AWARENESS TRAINING

This course is designed for electrical and non-electrical participants. It covers the legislative requirements of hazardous area installations and provides an overview of the relevant standards. It delivers an introduction to explosion-protected equipment and explains how to interpret hazardous area classification drawings and equipment markings. Occupational Health and Safety issues such as toxicity, fatigue management are also covered. Prerequisites: There are no prerequisites for this course. Course Duration: 1 Day Competency Outcomes: Upon successful completion of this course a Certificate of

completion will be issued.

5

BOOKING INFORMATION

All courses require a minimum number of 4 participants for the course to proceed. If there is insufficient number of participants Optec will cancel the course. You will be notified at least 7 days before the course is due to commence if it will be cancelled. Course Enrolment: To confirm your place on one of our Hazardous Area Wiring courses you must complete the ‘Hazardous Area Training course confirmation form’ (see page 7) and return to us ASAP to secure your place on the course. If you wish to pay by credit card you must also complete the ‘Credit Card Authorisation form’ (see page 8). If not paying by credit card you must provide us with a purchase order or cheque payable to Optec Pty Ltd.

PAYMENT WILL BE REQUIRED PRIOR TO ISSUE OF ANY STATEMENTS

A Cancellation Fee will be charged if Optec is not given at least two working days’ notice of Cancellation. The Fee will be the full course cost and any expenses incurred by Optec. PLEASE NOTE: PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE Initial Participant requirement: From the 1st of January, 2015 all course participants completing an Optec training course that will lead to the issue of a National Certificate or a Statement of Attainment will be required to provide Optec with a Unique Student Identifier number (USI). Please follow the link below which explains: What is a USI? How do participants obtain a USI? http://www.usi.gov.au/Training-Organisations/Pages/student-information-for-the-unique-student-identifier.aspx Initial participants must complete the ‘Learner enrolment form’ (see page 9-10).

6

PLEASE REFER TO OUR

ONLINE COURSE

CALENDAR FOR UPCOMING

COURSE DATES OR

CONTACT OUR OFFICE

BY PHONE OR EMAIL

Ph: (+613) 5133 7174

E-Mail Address: trainingco@optec.com.au

7

HAZARDOUS AREA TRAINING COURSE CONFIRMATION FORM

THIS FORM MUST BE COMPLETED AND RETURNED TO OPTEC 7 DAYS PRIOR TO TRAINING How to register your nomination - BY FACSIMILE: Transmit Completed Confirmation Form to (+613) 5133 7831 BY EMAIL: trainingco@optec.com.au

Company Name:

Contact Person:

Email Address:

Phone No: Fax No:

INVOICING DETAILS – DO NOT LEAVE THIS SECTION BLANK

Purchase Order No. (Compulsory) or Tick if paying via credit card

Address:

Accounts Email: Post Code:

Contact Person:

Phone No: Fax No:

COURSE DETAILS

Course Name: EEHA Hazardous Area Wiring (Please tick appropriate box)

COURSE A INITIAL COURSE A REFRESHER AWARENESS

State:

Course Date/s:

Course Time/s: 8am – 4pm

Course Address:

NAME OF ATTENDEE/S:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

Name:

Mobile:

Email:

DETAILS OF ADDRESS FOR COURSE RESULTS AND CERTIFICATES TO BE SENT:

Company Name:

Address: Post Code:

Contact Name: Phone No:

8

CREDIT CARD AUTHORISATION FORM

THIS FORM MUST BE COMPLETED PRIOR IF PAYING BY CREDIT CARD

Please fill out all details & return to our office for process of payment.

ABN: _____________________________

Company Name: _______________________________________________

Contact Name: ________________________________ Phone No.

Invoice Number: _____________

Credit Card Type: (Tick One Box Only)

American Express Diners Club Visa

MasterCard Bankcard

(Diners and American Express payments will incur a processing fee of 3% of the total

invoice amount)

Name as displayed on Card: __________________________________

Card Number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Expiry Date: _ _ / _ _

* Card verification number:________

* (Amex is 4 digits on the front of the card other card types is the last 3 digits on the back of the card)

I hereby authorise Optec Pty Ltd to debit from the credit card details above:

The total amount of: $________________

Authorisation Signature: _______________________ Date:___________

9

LEARNER ENROLMENT FORM (PAGE 1)

THIS FORM MUST BE COMPLETED FOR ALL INITIAL COURSE ENROLMENTS

All section must be completed. Please use block letters

Office Use Only

Course Code: ____________________________ Trainer: _________

Location: _______________________ Start Date: _______________ End Date: __________ Form to be used for all nationally recognised training courses that, on successful completion of the training course, will lead to the

issue of a National Certificate or a Statement of Attainment.

The following information shall not be disclosed to any third party other than the required reporting to AVETMISS national data base unless you complete a “Permission

for Release of Personal Training Records” Form

Section 1 – Personal Details

Unique Student Identifier (USI) “Statement of Attainment” cannot be issued without a USI. If you don’t have a USI go to www.usi.gov.au

Drivers Licence Number State Issued Trainer has sighted Licence

First Name (in full)

Surname

Residential address

City/Suburb State

Postcode Phone Number

Email address

Date of Birth (DD/MM/YYY) Gender (please circle) Male Female

Section 2 - Schooling

What is your highest COMPLETED school level? (Tick one box only) Year 12 Year 11 Year 10 Year 9 Did not go to school

In what year did you complete the above school level? ___________

Are you still attending secondary school? Yes No

10

LEARNER ENROLMENT FORM (PAGE 2)

Section 3 - Nationality

Are you or Aboriginal Yes No or Torres Strait Islander Origin? Yes No

In which country were you born? __________________________

In Which town were you born? ____________________________

What language do you use at home? (If more than one please indicate the one spoken more often) English Other Please specify _______________________

How well do you speak English? Very well Well Not well Not at all

Section 4 – Labor force status

Please select the category that best describes your current employment status. (One box only)

Full Time Employment Part-time Employment Casual Employment Self-Employed Employer Unpaid family worker Unemployed (seeking F/T work) Unemployed (seeking P/T or casual work) Unemployed (seeking contract work) Not employed or not seeking employment

Section 5 – Disability/Language, Literacy & Numeracy

Do you consider yourself to have a disability, impairment or long-term condition? Yes No

If yes, please specify ___________________________________________________________

Do you consider you have sufficient LLN skills & prerequisites for the unit you are undertaking?

Yes No If no, please specify ___________________________________

Section 6 – Prior education

Have you successfully completed any prior education achievement? Yes No (If yes, tick any applicable boxes)

Bachelor Degree or higher Advanced Diploma or Associate Degree Diploma Certificate IV Certificate III Certificate II Certificate I

What is your qualification: ______________________ _____________

Section 7 – Study reasons

Which of the following best describes your reasons for undertaking this course? (one box only)

To get a job Develop my business To start a business To try for a different career To get a better job or promotion It’s a requirement of my job I wanted extra skills To get into another course of study Personal interest/ self development