Designed by farmers for farmers

Available in 10 or 15 bale systems

Hay Handling System

Accumulator The Jadan Accumulator tows behind your baler, collecting 10 or 15 bales into a tidy pack onto the main table. This table then tips up and gently slides the pack onto the ground. Benefits ● Fully sealed electrical system ● Built to the highest standard using only high quality components ● Supplied with baler kit Options ● Scales—weigh your bales with a digital read-out in the cab. ● Bale Density Controller— streamline your bale weight specifications. ● Remote Override—override mechanical functions, puts you in control. ● Folding Tray—reduce transport and storage width, no need for oversize. Fully automatic with the option of finger tip control of all hydraulic functions from the tractor seat. (Remote Override Option required) Ideal for dumping unwanted or broken bales. The mechanical handling of the Jadan system preserves bale integrity and reduces leaf loss, compared to manual handling. Your Jadan Accumulator and Grab are covered by warranty for a period of 24 months from date of purchase, if failure should occur due to workmanship.

SIMPLE

FAST

AUTOMATIC

Density Controller Scales

UNIQUE

STRONG

LOW MAINTENANCE

Grab The Jadan Grab is easily mounted to a front end loader or forklift, and used to pick up packs of bales and stack them for storage and transport. The Jadan Grab allows you to load a semi in approximately 45 minutes. Benefits ● Powder coated finish ● Teflon bushed pivots—no grease required ● Superb strong design—grabs bales tighter ● Supplied with hose kit and hydraulic cylinder Options ● Fork Tyne Slippers—For forklift attachment of your grab ● Side Shift—To pack your bales tighter. ● Various loader lugs ● 12 volt Remote Control Power Pack—eliminates the need for hydraulics on your forklift. Great for produce stores. The Jadan Bale Accumulator and Grab system is manufactured here in Australia, so if replacement parts are required they are both inexpensive and easily obtained. A reliable one man operation for collecting and stacking hay from the field to a shed or transport.

DYNAMIC

EFFICIENT

15 Bale System 10 Bale System

Pack Configuration 6 x 8 ft 8 x 8 ft

Choose Your Machine Jadan can provide 15 and 10 bale systems to meet your requirements. ● 15 bale system is designed for 32-34 inch bale length ● 10 bale system is designed for 36-38 inch bale length

YOUR LOCAL JADAN HAY HANDLING SYSTEM SUPPLIER IS

Take the sweat out of handling small square bales with the Jadan bale Accumulator and Grab system.

Grab Accumulator

P: 1300 523 263 | F: 02 6344 3509 | admin@jadan.net.au | www.jadan.net.au

PO Box 760 , COWRA NSW 2794 | 2310 Canowindra Road, CANOWINDRA NSW 2804

A new beginning of effortless hay handling.

Don’t be seen without a Jadan Machine . . .