HASP SL Network License Tool

© 2013 by Anite Finland Ltd. All rights reserved.

This manual, as well as the software described in it, is furnished under license and may only be used or copied in accordance with the terms of such license. The information in this manual is intended for informational use only and is subject to change without notice. Anite Finland Ltd assumes no responsibility or liability for any errors or inaccuracies that may appear in this user manual.

Except as permitted by such license, no part of this publication may be reproduced or transmitted in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission of Anite Finland Ltd.

Windows®, Windows® XP, Windows® Vista, Windows® 7, Outlook®, and Internet Explorer are registered trademarks of the Microsoft® Corporation in the United States and other countries. All rights reserved. Sentinel is a registered* trademark of SafeNet, Inc.

All other trademarks are the property of their respective holders.

Revision 2.00.02, Last edited April 2013

HASP SL Network L icense Tool 3

INTRODUCTION .................................................................................................................................. 4

INSTALLING THE LICENSE SERVER ............................................................................................ 6

HW Requirements for License Server .......................................................................................... 6

License Server Network Settings ................................................................................................... 6

Installing and Configuring the License Server ............................................................................. 6

FLOATING LICENSE SERVER ....................................................................................................... 11

On-demand Licenses (Nemo Analyze-only) .............................................................................. 11

Detached Licenses......................................................................................................................... 12

Detaching a License Online ...................................................................................................... 12

Attaching a License Online ....................................................................................................... 15

Detaching a License Offline ...................................................................................................... 16

Attaching a License Offline ....................................................................................................... 21

Support ................................................................................................................................................ 23

Internet Support .............................................................................................................................. 23

User Club ......................................................................................................................................... 23

Phone, Email, and Fax Support ................................................................................................... 23


INTRODUCTION

This document describes the process of installing and using HASP SL network license tool and network licenses (i.e. floating license) with Nemo Outdoor and Nemo Analyze.

In order to use network licenses with Nemo Outdoor or Nemo Analyze, you will need a license server that will store and distribute the licenses.

Software licenses are permanently associated with the computer they are installed to and cannot be moved to another computer. However, software licenses can also be installed to a central floating license server, allowing Nemo Analyze/Nemo Outdoor to use the licenses over the network as needed.

With Nemo Analyze, you can reserve licenses on-demand basis, in which case a license is reserved from the server when Nemo Analyze is started, and immediately released to the server license pool when Nemo Analyze is closed. On-demand use requires continuous connection between the license server and the Nemo Analyze client.

With both Nemo Analyze and Nemo Outdoor, you can detach a license from the license server for predefined period or until the license is manually returned to the server. When using a detached license, the license is detached from the license server on your local computer. A detached license can be used without a connection to the license server, but it is not available to other users until it is attached back to the license server.


With Nemo Analyze, Floating license can be used both with Standalone and Client/Server:

♦ Note that the use of network license with the Nemo Analyze Enterprise Edition requires your system to have separate hardware for the Nemo Analyze database server, the license server, and the Nemo Analyze Clients. For database server and license server system requirements, see Nemo Analyze Server Administration Guide.

The license server, however, does not have to be dedicated for the license server, i.e. the server can run other services as well.


INSTALLING THE LICENSE SERVER

HW REQUIREMENTS FOR LICENSE SERVER The following operating systems are supported with the license server:

• Win32: 2000, XP, 2003 Server, 2008 Server and Vista and Windows 7

• Win64: WinXP, 2003 Server, 2008 Server, Vista and Windows 7 for x86-64

• OS X: Mac OS X 10.4.x-10.5.x

• Linux: SuSE ES 10 and 11, RedHat EL5 SP4, Ubuntu Desktop 8.04 and 10.04, Debian 5.04

LICENSE SERVER NETWORK SETTINGS The HASP license manager uses port 1947 for communicating with the client via TCP and UDP.

When using the autodetect method (server name and address not configured manually) for discovering the HASP license manager, the license manager sends a UDP broadcast to local subnets through port 1947.

Alternatively, the license manager host name or address can be configured manually in the Sentinel HASP Admin Control Center: go to http://localhost:1947, Configuration | Access to Remote License Manager | Specify Search Parameters. In this case, a UDP ping is sent through port 1947 for the license manager. Once the license manager is detected, it is connected via TCP port 1947.

INSTALLING AND CONFIGURING THE LICENSE SERVER

1. On the license server computer, run the install.bat file from the Nemo Outdoor or Nemo Analyze installation CD (…\HASP SL Network License Tool 900000-00). This will run the haspdinst_outdoor_provisional.exe file which may take a few minutes. When the installation is complete, the “Operation successfully completed” message is displayed.

2. Run the hasprus.exe file on the license server computer. In the Sentinel HASP RUS dialog, click the Collect Information button.

http://localhost:1947/


3. If you have HASP hardware dongles connected to the computer or you have other licenses on the same computer, you will see the Select HASP key dialog with multiple HASP HL and SL items. Select the correct software key (HASP SL) and click OK.

4. If you are not sure which HASP SL key to choose, go to the Sentinel HASP Admin Control Center web page http://localhost:1947. Go to the HASP Keys page. The vendor ID of Nemo tools is 95148. Locate the HASP SL key with the correct vendor ID and click the Features button.



5. If this is the correct key, there should be only two rows with Feature IDs 0 and 65000. Memorize the HASP key ID and select the corresponding HASP SL key in the Select HASP key dialog.

6. A .c2v file is created. Send the .c2v file to [email protected]. You will receive a .v2c file in return.

7. Run hasprus.exe again and go to the Apply License Update page. Click the browse button next to the Update File field and select the .v2c file. Click Apply Update. Now your license server has the license files that can be detached to client PCs.


8. Go to the Sentinel HASP Admin Control Center web page http://localhost:1947.

9. Select Configuration from the left-hand panel and go to the Detachable Licenses page. Select the Enable Detaching of Licenses option.

10. The Max. Detach Duration parameter defines how long the detachable licenses will work. After the defined period, the license will be returned to the server automatically.

11. After making changes on the page, click Submit.

12. On the Access from Remote Clients page you can restrict which machines and users can access the HASP License Manager.



13. Enter data in the following format: allow=[item] and/or deny=[item], where item is an IP address or machine name. The value of item can also be all or none. Each entry must be on a separate line. The entries are evaluated in the order in which they are specified. Finally, click Submit.


FLOATING LICENSE SERVER

ON-DEMAND LICENSES (NEMO ANALYZE-ONLY) After installing Nemo Analyze, open a browser on the same computer you are installing Nemo Analyze and go to the Sentinel HASP Admin Control Center web page http://localhost:1947.

You should see the floating license dongle available over the network in the Hasp Keys and Products sections.

If you do not see the dongle in HASP control center, select Configuration from the left-hand panel and go to the Access to Remote License Managers page. In Specify Search Parameters field, enter the IP address of the license server. Click Submit and wait for a few second. The dongle should appear in HASP Keys section. Check also firewall settings of the license server.

1. Start Nemo Analyze. A dialog box informing that the key is not found appears. Enter the IP address of the license server into Nemo Analyze. Nemo Analyze will now start with the floating license.


DETACHED LICENSES

Detaching a License Online The processes of retrieving and returning licenses from and to the license server are called detach and attach, respectively. Licenses can be detached and attached in online and offline modes.

In online mode the license server and the client PC (the one using the license) are connected to the same network. First you will need to define some settings for the client PC. Go to the Sentinel HASP Admin Control Center web page http://localhost:1947


2. Go to the Access to Remote License Managers page. In Specify Search Parameters field, enter the IP address or name of the license manager. Click Submit.



3. Go to the HASP Keys page. On the list you should see a HASP SL Detachable key.

4. Go to the Products page. Click Detach.

5. On the Detach License page, select Online as the detach method and specify a date when the license will be returned to the server (attached). Finally click Detach&Attach.


6. The License Detached Successfully message is displayed. You can now start using Nemo Outdoor or Nemo Analyze.

7. The License Information dialog in Nemo Outdoor and the Copy Protection tab on the About Nemo Analyze dialog in Nemo Analyze will display the expiration date for the license.


Attaching a License Online A license will expire after the date specified in the license server and it will be attached automatically. You can also attach the license manually if you wish to return it before the expiration date. Go to the Sentinel HASP Admin Control Center web page http://localhost:1947

1. Go to the Products page. Click Cancel License.

2. Click Cancel License.

3. The License Cancelled Successfully message is displayed.



Detaching a License Offline The processes of retrieving and returning licenses from and to the license server are called detach and attach, respectively. Licenses can be detached and attached in online and offline modes.

In offline mode the license server and the client PC (the one using the license) are not connected to the same network. First you will need to define some settings for the client PC. Go to the Sentinel HASP Admin Control Center web page http://localhost:1947


2. Go to the Access to Remote License Managers page. In Specify Search Parameters field, enter the IP address or name of the license manager. Click Submit.



3. If this is the first time you are performing a license detach, you will need to identify your client PC. Go to the Diagnostics page and click Create ID File. An .id file is generated.

4. Send the .id file to the license server administrator.

5. The administrator needs to go to the Sentinel HASP Admin Control Center web page http://localhost:1947, Update/Attach page. Click the Choose File button and select the .id file.



6. Click Apply File. “Your update was applied successfully” message is displayed.

7. Go to the Products page and click Detach.


8. Select the client PC as the recipient machine and set an expiration date for the license. Click Detach.

9. On the License Detached Successfully page, save the detached license as an .h2r file and send it to the client PC.

10. Once you receive the .h2r file, save the file on your client PC and go to the Sentinel HASP Admin Control Center web page http://localhost:1947

11. Go to the Update/Attach page. Click the Choose File button and select the .h2r file.



12. Click Apply File. The Your update was applied successfully message is displayed. You can now start using Nemo Outdoor.

13. The License Information dialog in Nemo Outdoor and the Copy Protection tab on the About Nemo Analyze dialog in Nemo Analyze will display the expiration date for the license.


Attaching a License Offline A license will expire after the date specified in the license server and it will be attached automatically. You can also attach the license manually if you wish to return it before the expiration date. Go to the Sentinel HASP Admin Control Center web page http://localhost:1947

1. Go to the Products page. Click Cancel License.

2. Click Cancel License.

3. The License Cancelled Successfully message is displayed. A .r2h file is created. Save the file and send it to the license server administrator.

4. The administrator needs to go to the Sentinel HASP Admin Control Center web page http://localhost:1947, Update/Attach page. Click the Choose File button and select the .r2h file.




5. Click Apply File. “Your update was applied successfully” message is displayed.

6. The license is now returned to the license server.


SUPPORT If you have questions on or beyond this documentation, please contact our technical support service at [email protected]. Note that for full support you need to have the Maintenance Agreement.

INTERNET SUPPORT At our web site http://www.anite.com/nemo, you can find all the frequently asked questions about Nemo Outdoor or Nemo Analyze, among other information.

USER CLUB The Nemo User Club offers several new ways to benefit from Nemo products. You can find it at our WWW site http://www.anite.com/nemo.

Access to the Nemo User Club is restricted to customers with SW maintenance and Technical Support agreements or partner agreements. If you are an existing Anite Finland customer with SW maintenance and Technical Support agreements, but you are without access to the user club, please complete an on-line registration form.

After submitting the requested information, you will receive a personal access key and password by email in a few days time.

Once you are registered with our User Club, you will automatically receive e-mails informing you each time a new version of software for your Nemo Product is released. It is fast, easy, and it is available to you seven days a week, 24 hours a day. If you have questions relating to the Nemo User Club, please e-mail us at [email protected].

PHONE, EMAIL, AND FAX SUPPORT During the warranty period, the phone and fax support related to potential software errors is free of additional charge. Registered users with a valid Maintenance Agreement are entitled to full support. When faxing or emailing, please let us know the number of your Software Maintenance and Support Agreement.

Please contact us at the following locations:

Global Email [email protected] Tel. +358 50 395 7800

Americas Email [email protected] Tel. +1 469 951 9105

+1 469 774 4608 (En español e português)

APAC Email [email protected] Tel. +65 6254 9003

mailto:[email protected]






P.R. China Email [email protected] Tel. +86 10 6567 8528

India Email [email protected] Tel. +91 982 0016372

Middle East Email [email protected] Tel. Tel. +97 155 620 4132




HASP SL Network License Tool

Documents

Transcript of HASP SL Network License Tool