Training on HART Products and Applications

(HART Converter / Gateway /

IO )

2015/11/25

ICP DAS Co., LTD. Joyce Yeh Tel: (03) 5973366 ext: 3007 Email: joyce_yeh@icpdas.com

Outline

•  HART Selling Points and applications

•  HART Product Series

•  Q & A

HART簡介HART (Highway Addressable Remote Transducer) was developed by Rosemount Inc. in 1985, is an early implementation of Fieldbus, a digital industrial automation protocol. Its most notable advantage is that it can communicate over legacy 4-20mA analog instrumentation wiring, sharing the pair of wires used by the older system. Features：u Support 4~20 mA Analog signal (primary measured value) and HART Digital signal (Device information) simultaneously u  Half-Duplex transmission at 1200 bpsu Wiring: Support 2-wire mode and 4-wire mode u Allow two HART mastersu Support point-to-point or multi-drop (max. 15 devices) HART network mode

WhatisHARTProtocol?

HARTNetworkMode(1)Point-to-Point (Analog and Digital)

Multi-drop (Digital)

HARTNetworkMode(2)

HowtoSell?(1)

•  WhatindustriesareHARTproductsusedin?Petrochemicalplant,ChemicalIndustry,OilandGasIndustry,Steel

Industry

•  Whatapplica6onsareHARTproductsusedin?Pipelinepressure,liquidlevelofastoragetank,temperature,flow

metermonitoringetc.

•   Whatcer6fica6onsdoICPDASHARTproductshave?CE/FCC/RoHS

HowtoSell?(2)•  WhatarethesalefactsofICPDASHARTproducts?

ü  Over12,000pcsweresoldayearworldwideü  HRT-710isthebestsaleitem(90%ofallHARTproducts)ü  RussiaandChinaarethemajormarkets

•  HARTdevicesbenchmark?Rosemount

•  HARTdevices(meters/gauges/valvse)reference?Rosemount_3051SMV/Signet9900Transmi\er/E+HPROMAGflow

meter/KhroneOPTISWIRL4070Cmassflowmeter/Emerson8800D/SeimensRD500/E+Hflexfmp51/Seimens_FUS060/...

SellingPointsofHRT-710/7111.  Moredatacanbeacquiredsuchaspressure,level,

temperature,flowetc.Thedigitalsignalcanbeusedforaddifonaldeviceinformafonincludingdevicestatus,diagnosfcs,addifonalmeasuredorcalculatedvalues,etc.

2.  SupportModbusRTU/ASCII/TCPformat

3.  EasytointegrateHARTdeviceswithSCADA(Indusog)

4.  Pricecompeffve

Oil Flow Application• Request : How to Integrate about 280 HART devices (24 lines) to PC via fiber? •  Solution: HRT-710 + I-2542-A/B

IntegrateHARTcomm. devicewithRS-232hardwareinterface

•  Request: How to integrate HART communication device (Flowmeter,Mobrey MCU900) with RS-232 hardware interface?

• Solution: Use HRT-710 and I-7570 to convert interface and protocol

Protocol Modbus HART HART Interface RS-232 HART RS-232

HART Product Series

泓格HART產品介紹 HART Gateway

Module Name HRT-710

(MBRTU / HART Gateway)

HRT-711 (MBTCP / HART

Gateway)

GW-7557 (PROFIBUS / HART

Gateway)

Picture

Master Comm. Interface

RS-232 RS-422 RS-485

Ethernet RS-232

HART Channel 1 1 4

Signal Isolation 2500 Vrms 2500 Vrms 2500 Vrms

DC/DC Isolation 3000 VDC 3000 VDC 3000 VDC

Master Comm. Protocol

MB/RTU MB/ASCII MB/TCP DP-V0

Driver None None None

Power Supply 10 ~ 30 VDC 10 ~ 30 VDC 10 ~ 30 VDC

250Ω Resistor By Jumper By Jumper By Jumper

Free Tool HG_Tool HG_Tool PH_Tool

HRT-710

1. How to read the data of HART device from SCADA or HMI?: A: FAQ ”Q01”, “Q02” and “Q03” (http://www.icpdas.com/products/Remote_IO/can_bus/faqs.htm#HART) 2. How to upgrade firmware of HRT-710? A: FAQ ”Q04” 3. 使⽤用AI模組讀取HART/AO錶頭電流值是穩定的, 但當接上HART- 710後(HART開始通訊時), 則AI模組讀取數值會有較⼤大振盪 ? A: AI模組需具備濾波功能 (I-7017RC / I-87017RCW)

HRT-710 FAQ

ICP DAS SiboTech ProSoft Technology

Moore Industries

ModelName

HRT-710 HTM-611HTM-631

HME-615HME-635

5208-MNET-HART5228-MNET-HART

HCS

interface 232/485/422 232/485/422

Ethernet Ethernet 232/485

protocol MB/RTUMB/ASC

MB/RTUMB/ASC

MB/TCP

MB/TCP MB/RTU

Built-inResistor

250Ω(1/4W)(7)

270Ω(2W)(13)

270歐Ω(2W)(13)

247.6Ω(15)

None

Channels 1 1/3 1/3 4/8 1

HARTDataformat

Digital Digital Digital Digital+Analog Digital

HRT-710 Product Comparison

HRT-711

Application Architecture

ICP DAS SiboTech ProSoft Technology

ModelName HRT-711 HME-615HME-635

5208-MNET-HART5228-MNET-HART

interface Ethernet Ethernet Ethernet

protocol MB/TCP MB/TCP

MB/TCP

Built-inResistor

250Ω(1/4W) 270Ω(2W) 247.6Ω

Channels 1 1/3 4/8

HARTDataformat

Digital Digital Digital+Analog

HRT-711 Product Comparison

GW-7557 Application Architecture

ICP DAS SiboTech ProSoft Technology

ModelName GW-7557 HPM-610 5507-PDPS-HART

PROFIBUS

Protocol DPV0 DPV0 DPV0

In/OutLength 240/240 244/244 200/200

Address 0~126 0~99 1~125

HART

Built-inResistor 250Ω (1/4W) (7)

270Ω (2W) (13)

247.6Ω (15)

Channels 4 1 4 / 8

HARTDataformat

Digital Digital Digital

GW-7557 Product Comparison

泓格HART產品介紹 HART Converter

Module Name I-7567 (USB to HART)

I-7570 (Serial to HART)

I-7547 (Ethernet to HART)

Picture

Master Comm. Interface USB

RS-232 RS-422 RS-485

Ethernet

HART Channel 1 1 4 Signal Isolation 2500 Vrms 2500 Vrms 500 Vrms DC/DC Isolation 3000 VDC 3000 VDC 3000 VDC Master Comm. Protocol HART HART HART

Driver Win2K/XP Win7/8 (32/64bit) None None

(Support VxComm)

Power Supply USB 10 ~ 30 VDC 10 ~ 30 VDC

250Ω Resistor By Jumper By Jumper By Jumper Free Tool HC_Tool HC_Tool HC_Tool

HDS:HARTDeviceSimulator

was

is

HDS:HARTDeviceSimulator

泓格HART產品介紹 HART I/O

Module Name I-87H17W(HART AI)

I-87H24W(HART AO)

Picture

Master Comm. Interface RS-485 RS-485

HART Channel 8 4

DC/DC Isolation 2500 VDC 2500 VDC

Master Comm. Protocol DCON DCON

Driver None None

Power Supply 10 ~ 30 VDC 10 ~ 30 VDC

250Ω Resistor Built-in Built-in

Free Tool API / Demo API / Demo

HART I/O Features

•  Support Current Reading (Analog) and HART communication (Digital)

•  Support WinPAC / ViewPAC / XPAC / iPAC series PAC controller

•  Support I-87Kn / RU-87Pn expansion slot •  Support DCON Utility •  Provide Demo (VC / VB / C# / VB.net)

=> Most applications are used in DCS system

HART I/O Application

( Gas Pressure Detection System )

I-87H17WApplication Architecture

I-87H24W(2/2)I-87H24W

Application Architecture

1. Does ICP DAS HART products support all HARTdevices ? Yes. The below is the tested HART device’s list. (Rosemount / Emerson / Endress & Hauser / Siemens / p+F / Yokogawa / KHRONE …

2. HART network wiring : Refer to the HART user manual.

3. 250Ohm(1/4W) built-in resistor : (1) Converter / Gateway : By jumper (Default: Enabled) I/O Module : Enabled (Fixed) (2) Built-In resistor : Support max. 7 HART devices Ext. resistor : Support 15 HART devices. (250Ohm/1W)

4. For more detailed HART fieldbus information : http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/hart/hart_selection_guide.html

HART Product Note

1.  ICPDAS HART Product Information : http://www.icpdas.com/products/Remote_IO/can_bus/hart_series.htm

2.  HART Communication Organization : http://www.hartcomm.org/index.html

Reference

～Thank you very much～

Q & A