II.Enumeration: Enumerate the folowing:

I. Identification: Identify the correct answer and write it on your paper:Is used for hardware to stand on to prevent static electricity from building up.Is used to loosen or tighten cross-head screws.3. Sometimes called a nut driver. It is use tighten nuts in the same way that a screwdriver tightens screws.4. Used to strip and cut wires.5. Is used to retrieve parts from location that are too small for your hand to fit.

6. Used to clean different computer components without scratching or leaving debris.7. Used to bundle cables neatly inside and outside of a computer.8. It is used to loosen or tighten slotted screws.9. A tool used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop.10. Is used to blow away dust and debris from different computer parts without touching the components.

II. Write True if the statement is correct and if it is False, change the incorrect word or group of words to makes it correct.Lay the computer on the mat.

Always wear an antistatic wrist strap if you are repairing a monitor or CRT.

3. If excessive force is needed to remove or add a component, something may be normal.

4. Before cleaning any device, turn on and plug the device from the power source.

5. Use compressed air to clean heat sinks.

6. Magnetized tools should be used around electronic devices.7. The connection will keep your body at the same voltage (potential) as the computer.8. Over tighten screws because the threads may become stripped.9. Use the proper type and size of screwdriver by matching it to the screw.10. Wrap the strap around your neck.

III.Enumeration: Enumerate the folowing:Four categories of hardware tools: 1-4B. Example of Handtools: 5-13C. Examples of Diagnostic Tools: 14-15D. Things that are easily generate frictions: 16-20