M-3

M

Hardness Testing MachinesStart quality control from the material — Mitutoyo's hardness testing machines can handle it

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice.

HM-200SERIES 810 — Micro Vickers Hardness

Testing Machines

•The latest electromagnetic force motor used in the loading mechanism enables the test force to be freely selected.

• In addition to Vickers hardness testing, Knoop (HK)* and Fracture toughness (Kc) tests can also be performed.

Refer to the Hardness Testing Machines Brochure (No. E17001) for more details.

•This entry-level series of microhardness testers is suited for mechanical characteristic evaluation and quality control of electric /electronic components where test forces no smaller than 98.07 mN/10 gf are sufficient.

System A (HM-210A/220A)SPECIFICATIONS

Order No. 810-401, 810-404 810-406, 810-409Model HM-210 HM-220Applicable standards JIS B 7725, ISO 6507-2Test force mN (gf) 98.07 to 9807 (10 to 1000) 0.4903 to 19610 (0.05 to 2000)Arbitrary test force One setting can be saved, default is HV0.025.External dimensions (excluding protrusions and stage); Main unit mass

System A: 315(W)×671(D)×595(H) mm / 38.5 kgSystem B /C / D : 315(W)×586(D)×741(H) mm / 37.4 kg

Power supply (main unit)

AC100 V 50 / 60 HzSystem A: 31 W System B /C / D: 30 W

AC100 V 50 / 60 HzSystem A: 44 W System B /C / D: 43 W

Note: 810-401, 810-406: System A, 810-404, 810-409: System B /C / D * For Knoop hardness testing, Knoop indenter (optional) is required.

System A (HM-210A /220A) All-in-one model with simple color touch-panel operationSystem B (HM-210B/220B) A system equipped with automatic reading function with AVPAK software System C (HM-210C /220C) In addition to the functions of System B, System C is equipped with an electric stage System D (HM-210D/220D) In addition to the functions of System B and System C, System D is equipped with the auto focus function

CAUTION: The AVPAK-20 software package is not for use within, or export to, the United States of America The AVPAK-10 software package is for the United States of America

HM-100SERIES 810 — Micro Vickers Hardness

Testing Machines

SPECIFICATIONSOrder No. 810-124-20* 810-125-20 810-959-20Model HM-101 HM-102 HM-103Applicable standards JIS B 7725, ISO 6507-2Test force mN (gf) 98.07 - 9807 (10 - 1000)

External dimensions (excluding protrusions and stage); Main unit mass

380×600×590 mm /42 kgー Control panel: 165×235×125 mm /1.5 kg－ ー TV monitor: 232×227×415 mm /4.4 kg

Power supply (main unit)

AC100 V 50 / 60 HzLess than 20 W Less than 60 W Less than 90 W

*Models which can be connected to the MeasurLink measurement data network system are only HM-102 and HM-103.

810-959-20HM-103

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

An inspection certificate is supplied as standard. Refer to page U-11 for details.

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

An inspection certificate is supplied as standard. Refer to page U-11 for details.

M-4

M

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice.

Refer to the Hardness Testing Machines Brochure (No. E17001) for more details.

An inspection certificate is supplied as standard. Refer to page U-11 for details.

System A (HM-110A /120A) All-in-one model with simple color touch-panel operationSystem B (HM-110B/120B) A system equipped with automatic reading function with AVPAK software System C (HM-110C /120C) In addition to the functions of System B, System C is equipped with an electric stage System D (HM-110D/120D) In addition to the functions of System B and System C, System D is equipped with the auto focus function

CAUTION: The AVPAK-20 software package is not for use within, or export to, the United States of America The AVPAK-10 software package is for the United States of America

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

HV-100SERIES 810 — Vickers Hardness Testing

Machines

SPECIFICATIONSOrder No. 810-440, 810-443 810-445, 810-448Model HV-110 HV-120Applicable standards JIS B 7725, ISO 6507-2Test force N (kgf) 9.807 to 490.3 (1 to 50) 2.942 to 294.2 (0.3 to 30)External dimensions (excluding protrusions and stage)

System A: 307×696×786 mmSystem B /C / D : 307×627×875 mm

Main unit mass HV-110: Approx. 60 kg HV-120: Approx. 58 kgPower supply (main unit)

AC100 V 50 / 60 HzSystem A: 24 W System B /C / D: 22 W

Note: 810-440, 810-445: System A, 810-443, 810-448: System B /C / D *1 For Knoop hardness testing, Knoop indenter (optional) is required.*2 For Brinell hardness testing a Brinell indenter (optional) and additional weight are required.

•Vickers hardness testers have a wide application in testing metals, especially small heat-treated parts, and are also suitable for making special-purpose tests such as carburized case hardness, maximum hardness of spot welds, high-temperature hardness, and fracture toughness of ceramic materials.

• In addition to Vickers hardness testing, Knoop (HK)*1/Brinell (HB)*2/ Fracture toughness (Kc) tests can also be performed.

System A (HV-110A/120A)

M-5

M

Hardness Testing MachinesStart quality control from the material — Mitutoyo's hardness testing machines can handle it

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice.

SPECIFICATIONSOrder No. 810-510-11 810-510-13 810-511-11 810-511-13 810-520-11 810-520-13 810-521-11 810-521-13 810-525-11 810-526-11Model HR-610A HR-620A HR-620BUnit (display unit) metric inch /mm metric inch /mm metric inch /mm metric inch /mm metric inch /mm

Indenter type*1 1/16" Steel ball 1/16" Tungsten carbide ball 1/16" Steel ball 1/16" Tungsten carbide ball 1/16" Steel ball1/16" Tungsten

carbide ball

Hardness testing methods

Rockwell JIS B 7726, ISO 6508-2, ASTM E18 *2

Brinell*3 JIS B 7724, ISO 6506-2, ASTM E10

PlasticISO 2039-1

JIS K 7202-2, ISO 2039-2, ASTM D785Indentation Brinell hardness VDI / VDE 2616Indentation Vickers hardness VDI / VDE 2616

Initial test force N (kgf)

Rockwell 29.42 (3) 98.07 (10)

Plastic9.807 (1)

98.07 (10)Indentation Brinell hardness 98.07 (10) 490.3 (50)Indentation Vickers hardness 9.807 (1)

Test force N (kgf)

Rockwell 147.1 (15) 294.2 (30) 441.3 (45) 588.4 (60) 980.7 (100) 1471 (150)Brinell 49.03 (5) - 1839 (187.5) 9.807 (1) - 2452 (250)

Plastic49.03 (5) 132.4 (13.5) 358.0 (36.5) 962.1 (98.1)

588.4 (60) 980.7 (100) 1471 (150)Indentation Brinell hardness 612.9 (62.5) 1839 (187.5) 2452 (250)Indentation Vickers hardness 294.2 (30) 490.4 (50)

Power supply AC100 - 200 V 50 /60 HzMass 176 kg 181 kg 205 kg

Note: Plastic testing may not be enabled depending on the material. For Brinell hardness, indentation Brinell hardness, and plastic hardness testing, and plastic hardness, other special accessories are required.*1 Supplied as standard.*2 Please contact us for information on ASTM standards.*3 For Brinell hardness testing, an indenter (option) and a measurement microscope are required.

• A workpiece that cannot be placed on a tester due to its large size can be placed on the table of this product and tested as is. (Maximum loading mass 100 kg.)

• The motorized stage makes automatic multi-point testing at multiple places and of multiple workpieces possible.

• Plastic hardness testing is also available in addition to Rockwell /Brinell tests on metal. Brinell and Vickers indentation hardness tests which do not require vision measurement can also be performed.

• The HR-610A /620A main unit is operable with the touch panel display and the HR-620B is operable with the touch panel display and AVPAK software.

• Automatic testing with movement in the X-, Y- and Z-axis directions for a workpiece having uneven surfaces or steps becomes possible by adding an X axis stage and AVPAK software to HR-620B. Also, using FORMEio software makes possible easy communication with PLCs for automation purposes, such as control of handling devices and work cells.

810-510-11HR-610A(Motorized X-axis table is available)

810-525-11HR-620B(Equipped with motorized Y-axis table. Motorized X-axis table is also available.)

An inspection certificate is supplied as standard. Refer to page U-11 for details.

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

HR-600 SERIES 810 — Rockwell Hardness Testing

Machine

M-6

M

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice.

Test

Equ

ipm

ent a

nd S

eism

omet

ers

Catalog No. E17009(2)

Rockwell Hardness Testing MachineHR-530 Series

HR-530SERIES 810 — Rockwell Hardness Testing

Machines

• Unique electronic control makes the HR-530 series of hardness testers extremely versatile by enabling Brinell hardness testing* as well as load-sequence hardness testing of plastics, plus Rockwell and Rockwell Superficial hardness testing.

* For Brinell hardness testing, an indenter (option) and a measurement microscope are required.

• This series can test the hardness of the inside wall of a ring, a test that is only possible using ordinary hardness testers by cutting the ring into pieces. (All models.)

• The touch-panel display unit can be mounted on top of the tester, providing significant convenience if the machine installation space is restricted. (All models.) Use the optional display mounting bracket to mount the unit.

• This series allows numeric display of statistical analysis results such as maximum and minimum values, mean value and graphic display of X̄-R control charts and histograms required for hardness evaluation.

810-331/332/336/337HR-530L

An inspection certificate is supplied as standard. Refer to page U-11 for details.

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

Refer to the HR-530 Series Brochure (No. E17009) for more details.

SPECIFICATIONSMetric

Order No. 810-231*1 810-236*2 810-331*1 810-336*2

Model HR-530 HR-530LApplicable standards JIS B 7726, ISO 6508-2Hardness testing methods Rockwell /Rockwell Superficial /Brinell / Plastics hardnessInitial test force N (kgf) 29.42 (3) 98.07 (10)Test force

N (kgf)Rockwell Superficial 147.1 (15) 294.2 (30) 441.3 (45)Rockwell 588.4 (60) 980.7 (100) 1471 (150)

Brinell 61.29 (6.25) 98.07 (10) 153.2 (15.625) 245.2 (25) 294.2 (30) 306.5 (31.25) 612.9 (62.5) 980.7 (100) 1226 (125) 1839 (187.5)

Power supply AC100/120 /220 /240 V Auto-selectionExternal dimensions

Main unit 250(W)×667(D)×621(H) mm 300(W)×667(D)×766(H) mmTouch-panel display unit 191(W)×147(D)×71(H) mm

Mass Main unit: Approx. 60 kgDisplay: Approx. 1.1 kg

Main unit: Approx. 69 kgDisplay: Approx. 1.1 kg

Inch/Metric

Order No. 810-232*1 810-237*2 810-332*1 810-337*2

Model HR-530 HR-530LApplicable standards JIS B 7726, ISO 6508-2Hardness testing methods Rockwell /Rockwell Superficial /Brinell / Plastics hardnessInitial test force N (kgf) 29.42 (3) 98.07 (10)Test force

N (kgf)Rockwell Superficial 147.1 (15) 294.2 (30) 441.3 (45)Rockwell 588.4 (60) 980.7 (100) 1471 (150)

Brinell 61.29 (6.25) 98.07 (10) 153.2 (15.625) 245.2 (25) 294.2 (30) 306.5 (31.25) 612.9 (62.5) 980.7 (100) 1226 (125) 1839 (187.5)

Power supply AC100/120 /220 /240 V Auto-selectionExternal dimensions

Main unit 250(W)×667(D)×621(H) mm 300(W)×667(D)×766(H) mmTouch-panel display unit 191(W)×147(D)×71(H) mm

Mass Main unit: Approx. 60 kgDisplay: Approx. 1.1 kg

Main unit: Approx. 69 kgDisplay: Approx. 1.1 kg

Note: Plastic testing may not be enabled depending on the material. For Brinell hardness, indentation Brinell hardness, and plastic hardness testing, other special accessories are required.

*1 1/16 in steel ball indenter is equipped as a standard accessory.*2 1/16 in carbide ball indenter is equipped as a standard accessory.

M-7

M

Hardness Testing MachinesStart quality control from the material — Mitutoyo's hardness testing machines can handle it

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice.

• A series of economical Rockwell hardness testing machines. The lineup consists of 5 models including a digital display type and an analog display type.

HR-100/200/300/400SERIES 963 — Rockwell Hardness Testing

Machines

963-241HR-430MS

963-210HR-110MR

SPECIFICATIONSOrder No. 963-210* 963-220* 963-240 963-231 963-241Model HR-110MR HR-210MR HR-430MR HR-320MS HR-430MSApplicable standards JIS B 7726 , ISO 6508-2

Supported hardnessesRockwell hardness

ー Rockwell Superficial hardnessPreliminary test force N (kgf) 98.07 (10) 29.42 (3) 98.07 (10)

Test force N (kgf)

Rockwell 588.4 (60) 980.7 (100) 1471 (150)Superficial ー 147.1 (15) 294.2 (30) 441.3 (45)

External dimensions (excluding protrusions and stage)

296(W)×512(D)× 780(H) mm 214(W)×512(D)×780(H) mm

Main unit mass 49 kg 46 kg 49 kg 47 kg 50 kgPower supply No power required AC100-240 V 1.2 A (DC adapter DC12 V 3.5 A)

* Models which can be connected to the MeasurLink measurement data network system are only HR-320MS, HR-430MR and HR-430MS.

An inspection certificate is supplied as standard. Refer to page U-11 for details.

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

M-8

M

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice.

An inspection certificate is supplied as standard. Refer to page U-11 for details.

Refer to the Hardness Testing Machines Brochure (No. E17001) for more details.

HARDMATIC HH-411SERIES 810 — Rebound Type Portable

Hardness Tester

HARDMATIC HH-300 SERIES 811 — Durometers for Sponge,

Rubber, and Plastics

811-329-10 HH-329811-335-10 HH-335811-337-10 HH-337

811-330-10 HH-330811-336-10 HH-336811-338-10 HH-338

Compact type Long type• Hardness measurement by durometer is simply performed by holding the instrument against the surface of a specimen and reading the indicated value. This type of hardness tester is most widely used for hardness testing of sponge, rubber, plastics and other soft materials.

• Excellent operability that performs hardness tests with the touch of a key and a compact body allows users to measure hardness in the field. This instrument is best suited for on-site hardness tests such as large molds, railroad track, and welded spots in structures.

811-332-10 HH-332

811-334-10 HH-334

811-331-10 HH-331

811-333-10 HH-333

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

Products equipped with the measurement data output function can be connected to the measurement data network system MeasurLink (refer to page A-5 for details).

SPECIFICATIONSOrder No. 810-299-10, 810-299-11, 810-298-10, 810-298-11 Model HH-411Detector Impact hammer with integrated detector and carbide-ball tip (D type: conforming to ASTM A 956)Display unit 7-segment LCDHardness display range Leeb hardness: 1 to 999 HL

Display range(This display range varies depending on the conversion table used.)

Vickers hardness: 43 to 950 HVBrinell hardness: 20 to 894 HBRockwell hardness (C scale): 19.3 to 68.2 HRCRockwell hardness (B scale) : 13.5 to 101.7 HRBShore hardness: 13.2 to 99.3 HSTensile strength: 499 to 1996 MPa

Power supply Alkaline AA battery 2 pcs or optional AC adapter (battery life: 70 hours)

External dimensions /Mass Detector: ø28×175 mm in length, 120 gDisplay: 70(W)×110(D)×35(H) mm, Approx. 100 g

Note: Order No. 810-298-10/810-299-10 includes two AA alkaline batteries and Order No. 810-298-11/810-299-11 excludes these batteries.

SPECIFICATIONS Order No. 811-329-10 811-330-10 811-331-10 811-332-10 811-333-10 811-334-10 811-335-10 811-336-10 811-337-10 811-338-10Model No. HH-329* HH-330 HH-331* HH-332 HH-333* HH-334 HH-335* HH-336 HH-337* HH-338Type Compact Long CompactDisplay specification Analog Digital Analog Digital Analog Digital Analog Digital Analog Digital

Measurement target Soft rubber, sponge,felt, hard film, winder General rubber, soft plastic hard rubber, hard plastic,

ebonite General rubber, soft plastic hard rubber, hard plastic, ebonite

Classification by specification Type E Type A Type D Type A Type D

Needle shape

Shaft diameter — ø1.25 mmTip shape Semi-sphere Circular truncated cone Cone Circular truncated cone ConeTip angle — 35° 30° 35° 30°Tip diameter ø5 mm ø0.79 mm — ø0.79 mm —Tip curvature — — 0.1 mm — 0.1 mm

Power supply —Button silver oxide battery

SR44—

Button silver oxide battery

SR44—

Button silver oxide battery

SR44—

Button silver oxide battery

SR44—

Button silver oxide battery

SR44

External dimensions (W×D×H) 68×34×146 mm 59×40×147 mm Analog, long type : 68×35×188 mmDigital, compact type: 59×41×1907 mm

Analog, long type : 68×34×146 mmDigital, compact type: 59×40×147 mm

Mass 300 g 290 g 320 g 310 g 320 g 310 g 300 g 290 g 300 g 290 g

* Models which can be connected to the MeasurLink measurement data network system are only Digital types.

Optional Accessories for Dual-purpose Stand CTS SeriesOrder No. 811-019 811-012 811-013Model CTS-101 CTS-102 CTS-103Applicable models HH-331/32 HH-333/34 /37/38 HH-335/36