Christmas is here and starts a 2019 full of adventures, projects, purposes and challenges.

We love challenges! And we hope that you too... For this reason we propose you to mount the gift that we have designed especially for this moment. You get it? Show us sharing it with the hashtag #conseguidoSM2.

Lean on us always you need it, we are your technological partner and our solutions are at your fingertips.

¡Happy 2019!A year full of opportunities to share together.

HAPPY NEW YEAR

Lean

on

us

You are not alone with this challenge, you can see the steps to make the origami in the video that we have made for you on:

talaia-openppm.com/origami

Or you can follow the printed version.

Also, you can download the origami to gift to your friends, coworkers or just to enjoy making it again.

Once you have cut the square, fold to the middle with the red arrow pointing up, unfold and now fold for the middle with the grey arrow pointing up, you should have a cross mark. Look the drawing. It is important that you mark good the paper, the folds are a guide for the next steps.

To continue, fold sides to the center, fold the bottom edge to the middle and the same with the top edge, you have a rectangle creating two tabs with opening on the center. Look at the figure 2.

With the two tabs closed on the middle of the paper square, fold the inferior corner and put to the center of superior axis, creating a triangle, marked the piece and unfold. Repeat the same process with the other corner. Now repeat the same steps with the white side. You should have an “X” on every side. Look at the figure 3.

Fold the corners of the middle and left a corner up and three down, making a triangle, open the triangle and put like a rhomb and fold the white corner to the middle of the rhomb, mark the little fold and unfold. This step is only to mark the figure in the white side. Look at figure 4.

Now we work with the other side, turn over the paper and join the superior corner with the inferior of two sides and push to the center, you will saw how their converts in a pincer, creating an arrow point. Look at figure 3.

Origami smartphone stand

1

2

3

4

5

figure 4figure 3

figure 2

figure 3

Let create the pyramid. Forget the open tab and join top corners, you look that are picking up over itself and it create the pyramid. Close the open tab and you have the first part. Look at figure 4.

We let create the inverted pyramid, take care about this step, you create a tridimensional element. Open the left tab and make pression on the axis, you should do that the little white square being a pyramid pointing at you, enter the left corner under the opened tab and fold better the parts that no adopts the form in a natural way and modelling the pyramid. When you got it you only need close the tab and adjust and turn down the figure.

YOU GOT IT!Congratulations, here you have your smartphone support.

You almost done! Unfold the last tab and back to the rectangular form and turn over, you should have the white square and the grey. Put the paper on vertical with the grey square up and down the white side. Look at figure 4.

6 8

7

sm2software-services.estalaia-openppm.com

figure 4

figure 4