Handset Internet Manual Settings

8/12/2019 Handset Internet Manual Settings

1/82

HandheldTigo Internet

SettingsWAP, GPRS & 3G


2/82

Tigo Internet (WAP) settings

Nokia 03Sony Ericsson 27Motorola 33Samsung 36LG 47Siemens 50

Other phones 53 Apple Iphone Alcatel Htc X-perial Window Mobile Nec

Sharp Palmtreo

3G Network Selection/settings

Internet 3G manual settings

Nokia 60Sony Ericsson 72

Samsung 74LG 76

Blackberry 79

Iphone 81


3/82

Tigo Internet(WAP) settings

NOKIAWAP

SETTINGS


4/82

Nokia 7250i 04

1 > Go to main menu, select connectivity, Scroll and select GPRS

2 > On GPRS connection, select always on lineor when needed

3 > Then scroll down and select, GPRS modem setting

4 > Then selectactive accesspoint and chose access point 1 or any other and activate it.5 > Then scroll down to edit active access pointand select it.

6 > Then select alias for access point and edit it, tigowap.

7 > Then scroll down to GPRS access pointselect and edit, tigowap.

8 > Go back tomain menuand select services

9 > Scroll and select settingsthen select connection setting.

10 > Select active service settingsselect any set and activate it.

11 > Scroll down to edit active service settingsselect it.

12 > Then select settings nameand edit tigowap.13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok.

14 > Scroll down to session mode selectit and select tempory

15 > Then scroll down to connection securityand selectoff.

16 > Then scroll down to data bearerselect it and choice GPRS.

17 > Scroll down to bearer settingand select it, Select GPRS access pointedit it tigowap.

18 > Then scroll down to IP addressand edit it (10.168.20.80)

19 > Then scroll down to authentication typeselect it and select normal

20 > Scroll down to login type selectit and select automatic21 > Then scroll down to user nameand leave blank.

22 > Then scroll down to password and leave blank.


5/82

05Nokia X6

1 > Go to menu Settingsscroll down to connectivity2

2 > Network destinations> click Wap services tigo web> Option> edit > connection

name - tigo wap Data bearer - Packet Data

3 > Access Point Name - tigowap user name - blank password - blank Authentication

- Secure Home page - None Use access point - tigowap

4 > Go to option> Advanced settings set Network type - IPV4 phone IP address -

Automatic DNS address - Automatic Proxy Server Address - 10.168.20.80 Proxy

port number - 8080


6/82

Nokia N71

1 > At the main screen, press the button for the menu, scroll to Weband press the joystick

2 > At the Bookmarks Menu, press Optionsand scroll down to select Settings

3 > Select Default access point, press the joystickand press Yes to a pop-up message

4 > Select Optionsand select New access pointwith use default settings

5 > SelectOptions and select advanced settings

6 > Network type :automatic

7 > Go to Proxy server Address and enter 10.168.20.80

8 > Enter Proxy port number: 8080, press Back to return to previous menu

9 > Select Connection name, edit name:tigowap, press OK

10 > Select Data bearer: GPRS

11 > Enter Access point name: tigowap

12 > Enter User name: leave blank

13 > Enter Password: leave blank

14 > Select Authentication: Normal

15 > Enter Homepage: http://wap.tigo.co.tz

16 > Press Back till exit to Bookmark screen

17 > Press Options and Downloadto start surfing WAP

06


7/82

Nokia 3510 / 3650 / 5100

1 > On the main menu, select service

2 > Scroll to settings

3 > Select edit active service settings

4 > Key in tigowapas the setting name

5 > Key in http://wap.google.com as home page

6 > Scroll down to data bearer select and choice GPRS

7 > Then select active access pointand choice access point 1 or any other and activate it.

8 > Then scroll down to edit active access point and select it.

9 > For IP address, key in 10.168.20.80

10 > Then scroll down to user name and leave blank.


12 > Press the back key to return to settings

13 > Select active service setting and activate

14 > Return back to services and select home Download the home page

07


8/82

Nokia 6310i / 6510 / 6610

1 > On the main menu, select services


3 > Select free set (set I, 2, 3 ect)

4 > Select and rename it tigowap

5 > Scroll back and select connection settings

6 > Edit tigowapand Key in http://wap.google.com as home page


8 > Scroll down to access pointand key in tigowap



11 > Then scroll down to password and leave blank



14 > Return back to services and select home, Download the home page

08


9/82

Nokia N6800

1 > In main menu, go to connectivity

2 > Select GPRS

3 > On GPRS connection select when needed

4 > Press back and select GPRS modem settings

5 > Then select active access point and choice access point 1or any other and activate it.


7 > Then select alias for access pointand edit it, tigowap

8 > Go back to main menu and select services



11 > Scroll down to edit active service settings and select it.

12 > Then select settings nameand edit tigowap.

13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok


15 > Then scroll down to IP address and edit it (10.168.20.80)


17 > Then scroll down to password and leave blank

18 > Go back to active settingand press select

19 > Scroll to tigowapand press activate

20 > Scroll back to home page and select

09


10/82

Nokia 7210




4 > Then selectactive accesspoint and chose access point 1 or any other and activate it.

5 > Then scroll down to edit active access pointand select it.






11 > Scroll down to edit active service settingsselect it.

12 > Then select settings nameand edit tigowap.

13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok.

14 > Scroll down to session mode selectit and select temporary





19 > Scroll down to login type selectit and select automatic

20 > Then scroll down to user nameand leave blank.


10


11/82

Nokia 7650

1 > Wap setting using GPRS

2 > In the main menu, go totools

3 > Select setting and connection

4 > Open access point, edit the existing access as follows:

Connection name:tigowap

Data bearer: GPRS

Access point name: tigowap

User name: blank

Prompt for password: no

Password: blank

Gateway IP address: 10.168.20.80

Home page: http://wap.google.com

5 > Scroll back to connection settings and select GPRS:

6 > At the access pointtype: tigowap

7 > Scroll back to main menu

8 > Scroll toservices and open, select option

9 > Scroll to settings, open and change default access point to tigowap

10 > Return to the main menuand selectservices.

11 > On the bookmarks google will be highlighted

12 > Press optionsand download.

11


12/82

Nokia 6600

1 > In the main menu, go totools

2 > Select setting and connection

3 > Open access point, select new access point

Choose use default settings

Connection name:tigowap

Data bearer: GPRS

Access point name: tigowap

User name: blank

Prompt for password: no

Password: blank

Gateway IP address: 10.168.20.80

Home page: http://wap.google.com

4 > Scroll back to connection settings and select GPRS:

5 > At the access pointtype: tigowap

6 > Scroll back to main menu

7 > Scroll toservices and open, select option

8 > Scroll to settings, open and change default access point to tigowap

9 > Return to the main menuand selectservices.

10 > On the bookmarks google will be highlighted

11 > Press optionsand download.

12


13/82

Nokia 6100




4 > Then selectactive accesspoint and chose access point 1 or any other and activate it.

5 > Then scroll down to edit active access pointand select it.






11 > Scroll down to edit active service settingsselect it.12 > Then select settings nameand edit tigowap.

13 > Scroll down to homepage and select it, edit it http://wap.google.com press ok.

14 > Scroll down to session mode selectit and select temporary





19 > Then scroll down to authentication typeselect it and select normal

20 > Scroll down to login type selectit and select automatic21 > Then scroll down to user nameand leave blank.


13


14/82

Nokia 8310

1 > On the main menu, select service


3 > Select edit active service settings

4 > Key in tigowapas the setting name

5 > Key in http://wap.google.com as home page


7 > Then select active access pointand choice access point 1 or any other and activate it.







14 > Return back to services and select home.

14


15/82

Nokia 6680

1 > Go to the main menuand search fortools.

2 > From toolsgo to settings

3 > Select connection and choose access points

4 > Add a new access point ORedit any network name found.

5 > Connection name: tigo

6 > Data bearer: Packet Access point name: tigowap

7 > Username:

8 > Password:

9 > Prompt password:

10 > Authentication: normal

11 > Please under settings, Packet data connection: choose when needed.

12 > Also choose the Access pointas: tigowap

13 > Also choose IPV4as the network type. The IPto enter incase of any: 10.168.20.80

15


16/82

Nokia 9300 / 9500

1 > Go to themain menuand looks for tools.

2 > From tools option, go to the control panel.

3 > Create a new GPRS account name such as tigo

without using the existing accounts.

4 > From there, go to the next optionand fill in the

access point name as tigowap

5 > Tab on the finish option and browse.

6 > These phones normally support WEB services

16


17/82

Nokia 2650 / 3200

1 > Menuthen go to setting, selects connectivity

2 > GPRS connection (always on line)

3 > Back to connection settings Active service setting (tigowap)

4 > Select edit active service setting (tigowap)

5 > Home page (http://wap.yahoo.com)

Session mode (permanent)

Connection security (off)

Data bearer (GPRS)

Bearing setting (select > gprs access point >tigowap)

IP address 10.168.20.80

Authentication type (normal)

Login type (automatic)

User name leave blank

Password leave blank

17


18/82

NOKIA 6230 / 6820 / 6610i / 6260

1 > Go to menu> setting> select connectivitythen select GPRS

2 > Then choice when needed or always online

3 > Back to settingthen select chat and my present setting

4 > Then select active chatand present setting (tigowap)

4 > Edit active chatand present setting write tigowap

5 > Set home page: http://mms.tigowap.co.tz

User id: leave blank

Password: leave blank

6 > Back to settingthen select connection settingthe set name: tigowap

proxies: enable

primary proxy: 10.168.20.8080

secondary proxy: 10.168.20.8080

data bearer: gprs

Bearer setting: tigowap

GPRS access point: tigowap

Authentication types : normal

Login type: automatic

User name: leave blank

Password: leave blank

18


19/82

Nokia 6020

1 > Set a APN, go to the following directory:

Settings / connectivity / packet data / packet data settings / Go to Active access point:

choose oneof the Access point(e.g.: Access point 1), and active it

2 > Go to editactive access pointto set the APN

Alias for access point: set a name (e.g. tigowap)

Packet data access point: set the APN: tigowap

3 > Now you can see the directory Active access point have been changed.

4 > Set proxy, go to the following directory:

Settings / configuration settings / personal configuration settings

Then click option / add new / web

Account name:wap

Use preferred access point: no

Access point settings: proxy : enabled

Proxy address: 10.168.20.80

Proxy port: 8080

Data bearer: packet data

Bearer settings / packet data access point: tigowap

The other setting keep default, you can set a homepage also if you like.

5 > Go to main menu / Web / settings / configuration settings:

Configuration: Personal config.

Account: tigowap

19


20/82

Nokia 6030

1 > Set proxy, go to following directory

Setting / configuration setting / personal configuration setting / Then click add new web

Edit account name: tigowap

Homepage: http://wap.yahoo.com

Use preferred access point: NO

Acess point setting: proxy :Enable

Proxy address: 10.168.20.80

Proxy port: 8080

Data bearer: packet data

Bearrer setting / packet data access point: tigowap

2 > Go to main menu / web / setting / configuration setting:

Configuration: personal configuration

Account: tigowap

20


21/82

Nokia 7260

1 > Go to menu> setting> then select connectivity

2 > Then select GPRS (make a choice always online or when needed)

3 > GPRS MODEM (Active access point) tigowap

4 > Edit active access point (tigowap)

5 > New alias (tigowap)press ok

6 > Setting > Select > home page

change home page to http://wap.google.com

Bearer setting change GPRS access point to tigowap

change ip address to 10.168.20.80

In authentication type select: normal

In login type select: automatic

Ignoreuser name

Ignorepassword

21


22/82

Nokia 7200

1 > Go to menu / service connection setting /

active service setting (activate any set) / edit active service settings

enter details for the following parameters:

Settings name: tigowap

Homepage: http://wap.yahoo.com

Proxies: enable

Primary proxy 10.168.20.80

Data bearer: GPRS

Bearer setting: GPRS access point: tigowap

Authentication type: normal

User name: blank

Password: blank

22


23/82

Nokia 6210 / 6230i / 6270

1 > Main menu/ Settings2 > Scroll down to configuration

3 > Scroll down to personal configuration settingsand select4 > Go to optionand add new5 > Selectaccess point

account name: tigowap data bearer: packet data bearer settings: replace internet with gprs : rest remain normal6 > Back to personal configuration settingsselect: tigowap options: activate7 > Go to optionsand add new : select web: Account name: tigoweb

Homepage: http://wap.tigo.co.tzUsername: skip

Password: skip Use preferred access point: no Select access point settings: proxy enable Proxy address: 10.168.20.80 Proxy port: 8080 Data bearer: packet data Select bearer settings Packet data access point:gprs

Authentication type:normal User name: skip Password: skip8 > Click backto use prefered access point and click yes then go back to tigoweb

created and go t

23


24/82

Nokia E65/ 6630/ 3250/ N90/ N70

1 > Main menu / Scroll totools / settings / optionsand select open2 > Select settings / optionsand select open

3 > Scroll down to connection / optionsand select open4 > Select access points / optionsand select open5 > Options scroll down to new access point6 > Scroll to the right and select use default settings

Connection name: tigowap Data bearer: packet data Access point name: tigowap User name: skip Prompt password: no Password: skip

Authentication: normal Homepage: http://wap.tigo.co.tz7 > Options and scroll down to advanced settings and select Network type: ipv4 Phone ip address: automatic Dns address: automatic Proxy serv. Address: 10.168.20.80 Proxy port number: 80808 > Select back to take you back9 > Select back again to save.

24


25/82

25Nokia X2

1 > Go to menu > Connectivity > Packet Data

2 > Set Packet data connection: when needed3 > Packet Data setting set Active access point: tigowap

4 > Edit active access point

Access point Allias: tigowap

Packet data access pt: tigowap

5 > Go back to menu > configuration

6 > Scroll down to Personal settings

7 > Click optionthen add new personal account

Account name: tigowap

8 > Then go to access point settings

Bearer settings > Packet data access point: GPRS

Network type: IPv4

Authentication type: secure

user name: skip

password : skip


26/82

26Nokia 3120

1 > Go to Menu / Service / Setting

2 > Connection setting/ select Active service settingsChoose any setting and active it.

3 > Go to Edit active service setting select it

Settings name: tigowap

Home page: http://wap.yahoo.com

Session mode: temporary

Connection security: off

Then select data bearer: choose GPRS

4 > Go to Bearer settings

Choose GPRS connection, then Always online

Go to GPRS access pointand select tigowap

IP address: 10.168.20.80

Authentication type: Normal

Logon type: Automatic

Username: blank

Password: blank

5 > Tigo wap setting completed


27/82


SON

YERICSSON

WAPSETTINGS


28/82

Sony Ericsson W800 / W800i / K800i / K750 / K751 28

1 > Main menu / Settings2 > Scroll right to connectivity

3 > Scroll down to data account4 > Connectivity5 > Data accounts or data communication/gprs New account/ Name: tigowap User name: skip Password: skip Preferred service: ps and cs or gsm and gprs Sms access: circuit switched or gsm6 > Internet settings / internet profile / new profile Name: tigowap7 > Connect using:scroll down and select tigo wap / tigo web and save.8 > Enter internet settingsand select: tigowap9 > Click on moreand select settings10 > Connect using / Use proxy: yes11 > Proxy address: 10.168.20.80 Port address: 8080 Username: skip Password: skip12 > After go to moreagain and selectadvanced / change homepage / name / tigowap Address: wap.tigo.co.tzfor wap and saved13 > Select secondary account14 > Select ask before use and check:dont ask me15 > Settings for java Under that connect using: tigowap Use proxy address: yes Proxy address: 10.168.20.80 Port number: 808016 > Save and now launch the browser


29/82

Sony Ericsson W950i / P990i

1 > Menu/ Select settings/ Select connectivity/ Select internet settings

Select connect using/ Select options/ Select create new/ Select ps data

Login name: tigowap

Login access point name: tigowap

Select save

2 > Go to tigowap access point

3 > Select options/ Select edit/ leave blank all fields except proxy settings

4 > Select proxy settings, press edit

Select proxy/ press edit/ press selecton enable

5 > Select back

6 > Just select all servers: keep off

7 > Select proxies/ Press edit/ select http

Leave blank fields usernameand password

Enter proxy address: 10.168.20.80

Enter port: 8080

Select back / Press end key

8 > Menu/ Select internet/ Select options/ Select advanced/ Select connectivity

Select connect using/ select tigowap

Select your default start page: http://wap.tigo.co.tz

9 > Push button end

29


30/82

30Sony Ericsson XPERIA, Windows Mobile

1 > Press Start / Home / Settings

2 > Select the Connections tab

3 > Select Connections

4 > Select under My Work Connection Add new modem connection

5 > Place in the fields : Connection name: tigowap

Select Modem: Cellular Line (GPRS)and click Next

6 > In access point name drop: tigowapand click Next

7 > Leave username, password and domain blank and Press End / Finish

8 > Go to the Edit My Proxy Server

9 > Select the box This network connects to the Internet

10 > Select the box This network uses a proxy server

11 > In place server: 10.168.20.80

12 > Select Advancedand check the boxes HTTP andWAP Proxy 10.168.20.80

In HTTP Port:8080

13 > Press OK


31/82

31Sony Ericsson K750i

1 > Go to main menu/ Connectivityand select Internet settings

2 > Go to Internet profiles, select New profile and press Add3 > Enter Name: tigomms

4 > Go to Connect using, and Add new account

5 > Select Account type: GPRS data

Enter Name of New account :tigomms

Enter APN: tigowap

Enter User id: leave blank

Enter Password: leave blank

6 > Press Saveto save your account.

Screen will return to Data Accounts

7 > Select your new profile then press save again

to go back to Internet Profiles.

8 > Highlight your new profile tigowap

Press Morethen Settings.

9 > Select Internet mode: WAP

Enter IP address: 10.168.20.80

10 > Leave the rest as default and press Save.


32/82

32Sony Ericsson C905

1 > Menu/ Select settings/ Select connectivity/ Select internet settings

Select connect using/ Select options/ Select create new/ Select PS data Login name: tigowap

Login access point name: http://wap.tigo.co.tz

Select save

2 > Go to tigowap access point

3 > Select options/ Select edit/ leave blank all fields except proxy settings

4 > Select proxy settings, press edit

Select proxy/ press edit/ press selecton enable

5 > Select back

6 > Just select all servers: keep off

7 > Select proxies/ Press edit/ select http

Leave blank fields usernameand password

Enter proxy address: 10.168.20.80

Enter port: 8080

Select back / Press end key

8 > Push button end


33/82


MOTORO

LA

WAPSETTINGS


34/82

34Motorola V3/l6/l7/v220/V400/V980

1 > Main menu / Webaccess / tools / settings2 > Scroll down to web sessions3 > Select web access / New entry Name: tigowap

Homepage: wap.tigo.co.tzfor wap Service type1: wapfor wap Proxy 1: 10.168.20.80 Port 1: 8080for web and wap Domain: ignore Service type 2: ignore Proxy 2: ignore Port 2: ignore Domain 2: ignore Dns 1: ignore Dns 2: ignore

Timeout: ignore Csd no1: ignore User name1: ignore Password: ignore 21speed (bps): 1440 Line type 1: modemcsd no.2: ignore User name 2: ignore Password: ignore Speed (bps) 2: ignore Line type 2: ignore Gprs apn: tigowap User name: skip Password: skip4 > Select the middle menuand set as a default and launch the browser to connect.


35/82

35Motorola Z9, V9, V3xx

1 > Press MENU

2 > SearchWAP and select (center button)3 > Search and select Configure WAP(center button)

4 > Select New Entryand put the following values in the boxes:

Name (connection): tigowap

Homepage: http://wap.tigo.co.tz

Proxy 1: 10.168.20.80

Proxy Port: 8080

GPRS APN: tigowap

5 > Select Done

6 > Go to tigowapand then select WAP options

7 > Select Default

8 > Press Back to menu


36/82


SAMSUNG

WAPSETTINGS


37/82

37Samsung D500/D700

1 > Menu / Browser /Scroll to profile settingsand select

Profile name: tigowap Homepage: wap.tigo.co.tz

Bearer: gprs only

Proxy: enable

2 > Select gprs settings

Ip address: 10.168.20.80

Port:8080

Apn: tigowap

Login id: skip

Password: skip

3 > Select Menu / Browser

4 > Select current profileand launch to connect


38/82

38Samsung S5230 Star

1 > Menu / Select Settings / Select network / Select Connections

2 > Select create/ SelectSet nameLogin: tigowap

3 > Select Login Name

Login: tigowap

4 > Select Type of authorization: Normal

Leave Username fields & password blank

Select protocol: WAP

Select URL from Home

Login: http://wap.tigo.co.tz

5 > Select Gateway Address

Login: 10.168.20.80

Port: 8080

6 > Select Timeout

Enter time in seconds 120

7 > Select Save

8 > Press ENDkey


39/82

39Samsung X430

1 > Press Menu, go to Fun boxand select WAP Browser

2 > Go to Settingsand select Profile1 Info Enter Profile Name: tigowap

Enter Homepage URL: http://wap.tigo.co.tz

Select Security: Non-Secure

Select Bearer: GPRS

Enter IP Address: 10.168.20.80

Enter Login Name: leave blank


Enter APN: tigowap

3 > Press Backkey to saveand exit Settings

4 > Select Hometo start your WAP surfing


40/82

40Samsung D500

1 > Press Menu, go to Browser

2 > Go to WAP Profileand select Profile1 Info (or any other unused profile) Enter Profile Name: tigowap

Enter Homepage URL: http://wap.tigo.co.tz

Select Bearer: GPRS


Enter User Name:leave blank


Enter Dial-up Number: leave blank

Select Data Call Type: ISDN

3 > Press Back keytwice to saveand exit Settings

4 > Select Hometo start your WAP surfing


41/82

41Samsung SGH - X830

1 > In idle mode, press browser/ browser settingsor settings/ connection

2 > select browser profile3 > press Newto add a new connection and add a new profile.

If a profile has already been saved, press optionsand select Edit

4 > Specify profile name: tigowap

5 > Specify profile parameters: http://wap.tigo.co.tz

6 > Set IP Address: 10.168.20.80

7 > Enter proxy port: 8080

8 > Linger Time: not necessary

9 > DNS 1: Blank

10 > DNS 2: Blank, set bearer data: GPRS

11 > When the bearer is set to GPRS

set APN: tigowap

Login ID: Blank

Password: Blank

12 > Press saveto save the profile.


42/82

42Samsung SGH -G600

1 > In idle mode, press browser/ browser settingsor settings/ connection

2 > select browser profile3 > press Newto add a new connection and add a new profile.

If a profile has already been saved, press optionsand select Edit


5 > Enter the URL address of the page to be used as your home page: http://wap.tigo.co.tz

6 > Select network Bearer type: GPRS onlyor GSM only

7 > Activate proxy server: set enable

8 > Enter APN (access point name): tigowap

login ID and password leave blank.

9 > Set Data call type.



43/82

43Samsung SGH F210

1 > In idle mode, press browser/ browser settings

2 > select browser profilefor profile change3 > press optionsand select Edit


5 > Activate Proxy Server / Specify URL:http://wap.tigo.co.tz

6 > Enter IP address of the Proxy Server: 10.168.20.80

7 > Enter the Port number of the proxy Server: 8080

8 > DNS 1 And DNS 2 Leave Blank

9 > Select the Network bearer type: GPRS

10 > Advanced Settings / Enter APN: tigowap

Login ID and Password Leave Blank.



44/82

44Samsung SGH - G800


2 > Press createto add a new connection and add a new profile. If a profile has already been saved, press optionsand select Edit


4 > Enter Access name: tigowap

5 > Auth type setNone

6 > User ID: Blank

Password: Blank

7 > Select protocol: WAP

8 > Home page URL enter:http://wap.google.com

9 > Proxy or Gateway address: 10.168.20.80

10 > proxy port: 8080

11 > enter the access point: tigowap



45/82

45Samsung SGH - J700


2 > Select a profile3 > Specify profile name: tigowap

4 > Enter the URL address of the page to be used as your homepage http://wap.tigo.co.tz

5 > Select the Network Bearer type: GPRS onlyor GSM only

6 > When the bearer is set to GPRS:

ENTER proxy address IP 10.168.20.80

Proxy port: 8080.

7 > User ID: Blank

Password: Blank

8 > Set Data call type: ISDN



46/82

46Samsung SGH - D840


2 > Press New/ Editto add a new connection and add a new profile. If a profile has already been saved, press Optionsand select Edit


4 > Enter the URL address of the page to be used as your homepage http://wap.tigo.co.tz

5 > Enable proxy

6 > Enter Tigo IP address 10.168.20.80

7 > Enter prot number/ proxy port: 8080

8 > DNS 1 and DNS 2 Leave Blank

9 > Set Data bearer : GPRS



47/82


LGWAP

SETTINGS


48/82

48LG G5600 / T5100

1 > From the Menu, go to Service / Internet / Select Profiles

2 > Select Optionsand select Add new3 > Enter Profile name: tigowap

4 > Select Optionsand select Activateto activate the profile

5 > Go to Settings

Enter Homepage: http://wap.yahoo.com

Select Bearer: GPRS

6 > Go to GPRS settings


Enter APN: tigowap

Enter User ID: leave blank


7 > Press Back keyto return to the previous menu

8 > Select Connection type: Continuous

9 > Select Security settings: Off

10 > Press Back keyto return to Internet main menu

11 > Select Hometo start WAP surfing


49/82

49LG KP 215 / LG MP 280

1 > Menu / Select Settings / Select Connectivity / Select Network / Select Access Point

2 > Select Options / Select New Access PointLogin Name: tigowap

Select Carrier: GPRS

Enter APN: tigowap

Select Save

3 > Press Finish button

4 > Menu / Select Browser / Select Settings / Select Network Profiles / Select Options

5 > Select New Profile

Login Name: tigowap

Log Home page: http://wap.tigo.co.tz

Select Proxy Mode: On

Enter Proxy: 10.168.20.80

Enter Port Number: 8080

6 > Select Access Point: tigowap

7 > Select Options

8 > Keep

9 > Select Profile tigowap/ Select Options

10 > Select Enable (check symbol should appear red on the tigowap profile)


50/82


SIEMMENS

WAP

SETTINGS


51/82

51Siemens Phones

1 > Main menu / Settings / Select option and select2 > Scroll to connectivity

3 > Gprs change (switch on gprs)4 > Scroll to rename Profile name: tigowap5 > Selectoption and edit(changes may effect application cont? Yes) Csd settings: ignore6 > Gprs setting/ Select edit Select apn: tigowap Login id: skip Password: skip Dns1: ignore

Dns2: ignore and save to exit7 > Go back to the main menu8 > Select vodafon live/surf and fun9 > Select optionand scroll to select set up10 > Scroll to profileand select option/ Select to edit Profile name: tigowap Homepage: http://wap.tigo.co.tz

Protocol: wap/wsp http Gateway/proxy server id: 10.168.20.80 Address: 10.168.20.80

Port: 8080 User name: skip Password: skip Gprs linger time: ignore Csd linger time: ignore


52/82

52Siemens S56 / Sl56

1 > Main Menu

2 > Search Browseand pressSelect3 > Search the Internetand press Select

4 > Search Profiles and press Select

5 > Search 1and press Select

6 > About 1PressEdit

7 > Find Nameand press Edit

Write tigowapand press Done

8 > Search IP Addressand press Edit

Write 10.168.20.80and Ready

9 > Search Portand leave it in 8080

10 > Search Homeand press Edit

Write Press http://wap.tigo.co.tz and Ready

11 > Search Expiry GPRSand press Edit

Write 15and press Done

12 > Search Expiry CSDand press Edit

Type 30and press Done

13 > Search connection profileand press Edit

Search tigowap and press Select

14 > Lower press EXIT


53/82


VARIOUSW

AP

SETTINGS


54/82

54Sharp Gs15

1 > Select middle keyto menu

2 > Settings3 > Scroll to network

4 > Select wap settings

Profile name: tigowap

IP address: 10.168.20.80

Homepage: http://wap.tigo.co.tz

Port: 8080

Circuit prompt: enable

Connection type: gprs

5 > Select gprs settings

Apn: tigowap

User name: skip

Password: skip

Csd settings: ignore

6 > Go back to optionto activate the profile created tigowapand launch the browser.


55/82

55Nec 616V

1 > Main menu/ Settings

2 > Scroll down to network setup3 > Select

4 > Select apn:

5 > Edit

6 > Password in the box: 0000 (four zeros)and select ok

7 > Scroll down and select network setup

Apn name: tigowap

Apn address: tigowap and click okay to exit

8 > Select the browser launchkey from the key pad

9 > Select the middle key

10 > Scroll down to url: http://wap.tigo.co.tz

11 > You can now launch through the key pad to connect


56/82

56Htc

1 > Desktop

2 > Login to: Configurations3 > Login to: Wireless Configuration

Login: Go

Login to: Mobile Networks

Login and Select Network Mode: 3G & 2G

(if not working properly all wap settings, mms, internet, broadband, etc with the active 2G & 3G

option, then enable the option "Use only 2G"network)

Login to: Networks > Select Enable

4 > Login to: Access Point Names

5 > Select MENU

Select: NEW APN

Select: NAME

Login: tigowap

Select APN

Login: tigowap

Select: IP / Proxy

Login: 10.168.20.80

Select: Port Enter: 8080

6 > The other values remain unaffected.

7 > Select: MENU > Select:SAVE.


57/82

57Alcatel 501

1 > Press the OK button.

2 > Scroll to and select Internet, to select an option press the ok button3 > Press the # keyfor about 5 sec to access the Browser menu while the browser is launching.

4 > Scroll to and select 8 parameters.

5 > Scroll to and select Profile 1.

6 > At the Configuration Menu, enter the following information into the respective fields.

Profile Name: tigowap

Profile Address: 10.168.20.80

Profile Port: 8080

7 > Scroll to and select Access Mode.

8 > Scroll to and select Access 1 at the Choose Access menu

9 > Scroll to and select RAS number: Leave blank

10 > Scroll to and select tigowap for Access type

11 > Scroll to and select 9600 Bit/s for Data Rate.

12 > Press to exit the ConnectParam Menu

13 > Scroll to and select Username: leave blank

14 > Scroll to and select Password. Leave blank

15 > Press to exit the Configuration Menu.

16 > Scroll to and select HomepageEnterhttp://wap.yahoo.com

17 > You may start your surfing experience now


58/82

58Apple Iphone

1 > Go to the start menuand select settings option

2 > Go to GPRSand choose PAP Authentication3 > Go to connectionsand perform the following under the ISP.

4 > Add new connection: tigowap

5 > Access Point Name: tigowap

6 > Use proxy settings by entering the IP: 10.168.20.80

7 > Port: 8080

8 > Domain: empty

9 > Save settings and go to the browser section to enter an address to access"


59/82

59Palm

1 > Press start / home

2 > Press settings3 > Select the connections tab

4 > Select connections

5 > Select under my work connection add new modem connection /

add new modem connection

6 > Place in the fields :

Connection name: tigowap

In select modem: cellular line (gprs)

7 > Click next

8 > In access point namedrop: tigowap

9 > Click next

10 > Leave username, passwordand domain blank

11 > Press finish

12 > Go to the edit my proxy server

13 > Select the box: this network connects to internet

14 > Select the box: this network uses a proxy server

15 > In field server: 10.168.20.80

16 > Select advanced: check the boxes are http and wap proxy 10.168.20.80

In http port enter 8080

17 > Press ok


60/82

Tigo Internet3G Network Selection

NOKIA3G

NETWORKSETTINGS


61/82

61Nokia 2690

1 > Menu

2 > Settings Connectivity / packet data / Packet data connection set when needed / always on line3 > Go back then, Edit Active accesss Point

Allias for access point: tigowap

Packet data access point: tigowap

4 > Go back to settings / configuration / select personal configuration,

Select tigowap

Account name: tigowap

user name: skip

Password: skip

Use prefered access point: No

Access point settings Proxy: Enable

Proxy Address: 10.168.20.80

Proxy port: 8080

Data bearer: Packet Data

5 > Bearer Settings

Packet data access point: tigowap

Network type: IPv4

Authentication type: Normal

User name: skip

Password: skip


62/82

62Nokia 5230

1 > Go to menu

2 > Scroll to settings, then select connectivity / Network3 > Then set Network mode:Dual mode, to pick both UMTS for 3G and GSM for 2G


63/82

63Nokia 6555

1 > Go to menu, select settings

2 > Go to Network mode3 > Set Dual mode (UMTS and GSM)


64/82

64Nokia 6300

1 > Go to Menu/ then settings

2 > Select Packet Datathen set HSCSD/GSM(NOTE: HSCSD high speed circuit switched data).


65/82

65Nokia 6700 Classic

1 > Go to menu / select settings / phone

2 > Network mode/ select UMTS/GSM Network.


66/82

66Nokia 6234

1 > Go to menu / setting / select phone settings

2 > Go to networkand set WCDMA and GSM


67/82

67Nokia N81

1 > Go to menu / Settings / select Phone / go to Network

2 > Then set Dual modein order your phone to pick both GSM and UMTS automatically.


68/82

68Nokia N900

1 > In the status the current network is indicated with the following icons:

2G- GSM, 2.5G EDGE, 3G - 3G and 3.5G - HSPA2 > Go to menu/ select setting / select Network/ then select Dual,

3 > Then your device can select GSM/3G network Automatically.


69/82

69Nokia X6-00

1 > Go to menu / select settings / go to connectivity / select Network

1 > Switch your phone Automaticallybetween GSM&UMTS network.


70/82

70Nokia N 95

1 > Go to menu / select settings / click phone setting

2 > Then press Network select Dual Mode set Automatic to use both GSM and UMTS


71/82

71Nokia X6

1 > Go to menu / Settings / scroll down to connectivity

2 > Then open Network3 > On Network modeset dual mode

4 > Operator selection: Automatic

5 > Cell info display set On


72/82


SONYERICSSO

N3G

NETWORKSET

TINGS


73/82

73Sony Ericsson W850 / W880 / W880i / K530i

1 > Go to Menu/ then setting/ select connectivity tab/ Mobile Network

2 > Select GSM/3G Networks / (Gsm/3G Automatic)


74/82


SAMSUNG3G

NETWOR

KSETTINGS


75/82

75Samsung SGH E250i

1 > Menu / Browser / Profile settings / option

2 > Edit profile : tigowap Profile name: tigowap

Home URL: http://wap.tigo.co.tz

Bearer:GPRS only

Proxy: Enable

3 > GPRS Settings:

Proxy IP: 10.168.20.80

Proxy port: 8080

APN: tigowap

Log in ID: empty

Password: empty

4 > Save


76/82


LG3G

NETWORKSETTINGS


77/82

LG KU 990

1 > Go to menu

2 > Click setting / Network services3 > Set network modeautomatic modethen set GSM and WCDMA.

77


78/82

Tigo Internet 3GSettings

WAP

SETTINGS


79/82

Blackberry Services (all types of blackberry phones)

Set Up Blackberry Messenger 1. Request using PIN

How to resend service book1 > Remove battery from the device2 > Leave the battery out for at least 30 seconds3 > Replace battery and let the device reboot. Do this normally when, Web browser Icon is missing when Resending service book if E-mail stopped arriving.

1. From the menugo to option.

1. Locating a Device's PIN

Select Options fromthe main menu.

Select Status and scrolldown to the PIN on yourBlackBerry device.

Copy the PIN by pressing

the BlackBerry button(or Berry button) on yourdevice, and select Copy

2. Add the PIN of your contactto the Address Book.

Select Address Bookfrom the main menu.

Press the BlackBerry buttonon your device, and select

New Address. Input the contacts name,

contact details, and PIN.

3. Request a Friend Using His/Her PIN

Select BlackBerry Messengerfrom the main menu.

Press the BlackBerry butto(or Berry button) on yourdevice, and select Add a Contact.

You will be brought to the Address Book.Select the contact whose PIN you previously added.

Enter a personal message and/or select OK.The contact will be added to the pending groupin BlackBerry Messenger. When the contact acceptsyou they will be added to your list of contacts.

2. Select theAdvanced options

3. Select HostRooting Table

4. Scroll down to Optionthen select > Register now

79


80/82

Blackberry Services (all types of blackberry phones) 80

2. Requesting Blackberry Messenger Using Email.

1. Add your contact's e-mail address

to the Address Book.

Select Address Book

from the BlackBerry main menu.

Press the BlackBerry button

(or Berry button) on your device,and select Add a Contact.

Input the contacts name,

contact details, and e-mail address.

2. Request a Friend Using

His/Her PIN

Select BlackBerry Messenger

from the main menu.

Press the BlackBerry button

(or Berry button) on your device, and select Add a Contact.

You will be brought to the

Address Book. Select the contact

whose e-mail address you added.

Enter a personal message and/or

select OK. The contact will be

added to the pending group

in BlackBerry Messenger.

When the contact accepts you,

he/she will be added to

your list of contacts.

Step 2: Start Chatting.

Select the contact name.

Start typing your message.

To send, press Enter or simply

press your trackball or wheel. Press Esc to exit the conversation.

This will not end the conversation;

it will stay in your Current

Conversations folder.

When you are finished chatting,

click the trackball and select

End Conversation.


81/82

Iphone 3G manual settings

Go to menu, select settings Scrol down to General Select Network,set Location Service On

Select cellular Data NetworkActivate Data Roaming set On,

Go back to Network,Select Advanced,then Set APN as tigowap,and follow instructionto do other settings.

Go to General, then NetworkCellular Data Network,set Data roaming On.

81


82/82

Handset Internet Manual Settings

Documents

Transcript of Handset Internet Manual Settings