Handrailing for Maintenance Stairway Hong Kong Ic2103j
1
NOTES: SCALE DRAWING NO. DATE 1 : 25 JAN 1991 C2103J HANDRAILING TO MAINTENANCE STAIRWAY ON SLOPE Original Signed E NAME OF DEPARTMENT AMENDED. 01.2005 F Original Signed MINOR AMENDMENT. 07.2006 CIVIL ENGINEERING AND DEVELOPMENT DEPARTMENT REF. REVISION SIGNATURE DATE G Original Signed 02.2007 NOTE FOR DOUBLE HANDRAIL ADDED. H 02.2008 STEEL ANGLE BASE ADMENDED. Original Signed SIZE OF MILD STEEL TUBE REVISED 09.2013 J 1. ALL DIMENSIONS ARE IN MILLIMETRES. 2. HANDRAIL SHALL BE PROVIDED TO THE SIDE(S) WHERE A PERSON IS LIABLE TO FALL OVER 2m. 3. ALL WELDS SHALL BE CHIPPED AND GROUND SMOOTH AND BRUSHED TO REMOVE SLAG AND PROTECTED BY TWO COATS OF ZINC RICH PAINT TO BS4652. 4. ALL STEELWORK SHALL BE HOT DIP GALVANIZED. 5. ALL STEEL POSTS AND TUBES SHALL COMPLY WITH BS EN 10255 (MEDIUM AND HEAVY SERIES TUBES) 6. ALL STEEL ANGLES SHALL COMPLY WITH BS EN 10025 AND BS EN 10056. 7. CONCRETE TO BE PAINTED AS SPECIFIED. 8. ALL EXPOSED STEELWORK SURFACES SHALL BE TREATED AND PAINTED IN ACCORDANCE WITH THE GENERAL SPECIFICATION AND PARTICULAR SPECIFICATION OR AS SPECIFIED BY THE ENGINEER. Original Signed A A 200 200 500 500 1000 1000 FINAL SLOPE PROFILE AT MID-HEIGHT OF EACH BATTER 2000 MAX. GRADE 20 / 20 CONCRETE OR 20 MPa SPRAYED CONCRETE CONCRETE MAINTENANCE STAIRWAY ( SEE DRG. NO. C2101 FOR DIMENSIONS ) DN25 HEAVY SERIES MILD STEEL TUBE DN40 MEDIUM SERIES MILD STEEL POST SEE DETAIL ’A’ SECTION A - A OVERALL WIDTH TO BE SPECIFIED (600 MIN.) SEE DETAILS OF STEEL ANGLE BASE DN40 MEDIUM SERIES MILD STEEL POST (SEE NOTE 2) 100 EQ. EQ. EQ. EQ. 100 SCALE 1 : 5 6 100 25 25 25 25 100 PLAN ELEVATION END ELEVATION 4 NOS. 8 DIA. STAINLESS STEEL ANCHOR BOLT WITH WASHER ANCHOR BOLT WITH MINIMUM 69 EMBEDMENT DEPTH LEVEL OF CONCRETE STEP DETAILS OF STEEL ANGLE BASE 100 x 100 x 10 Tk MILD STEEL ANGLE DN40 MEDIUM SERIES MILD STEEL POST DN40 MEDIUM SERIES MILD STEEL POST SCALE 1 : 10 DOME-SHAPE METAL CAP WELDED ON TOP OF HOLLOW SECTION 6 10 MIN. DN25 HEAVY SERIES MILD STEEL TUBE DN40 MEDIUM SERIES MILD STEEL POST DETAIL ’A’ ¤V¶u/{ We Engineer Hong Kong’s Development
description
MS Handrailing
Transcript of Handrailing for Maintenance Stairway Hong Kong Ic2103j
NOTES:
SCALE DRAWING NO.
DATE
1 : 25
JAN 1991 C2103J
HANDRAILING TO MAINTENANCE
STAIRWAY ON SLOPE
Original SignedE NAME OF DEPARTMENT AMENDED. 01.2005
F Original SignedMINOR AMENDMENT. 07.2006
CIVIL ENGINEERING AND
DEVELOPMENT DEPARTMENT
REF. REVISION SIGNATURE DATE
G Original Signed 02.2007NOTE FOR DOUBLE HANDRAIL ADDED.
H 02.2008STEEL ANGLE BASE ADMENDED. ����Original Signed
SIZE OF MILD STEEL TUBE REVISED 09.2013J
1. ALL DIMENSIONS ARE IN MILLIMETRES. 2. HANDRAIL SHALL BE PROVIDED TO THE SIDE(S) WHERE A PERSON IS LIABLE TO FALL OVER 2m. 3. ALL WELDS SHALL BE CHIPPED AND GROUND SMOOTH AND BRUSHED TO REMOVE SLAG AND PROTECTED BY TWO COATS OF ZINC RICH PAINT TO BS4652. 4. ALL STEELWORK SHALL BE HOT DIP GALVANIZED. 5. ALL STEEL POSTS AND TUBES SHALL COMPLY WITH BS EN 10255 (MEDIUM AND HEAVY SERIES TUBES) 6. ALL STEEL ANGLES SHALL COMPLY WITH BS EN 10025 AND BS EN 10056. 7. CONCRETE TO BE PAINTED AS SPECIFIED. 8. ALL EXPOSED STEELWORK SURFACES SHALL BE TREATED AND PAINTED IN ACCORDANCE WITH THE GENERAL SPECIFICATION AND PARTICULAR SPECIFICATION OR AS SPECIFIED BY THE ENGINEER.
Original Signed
A
A
200
200
500
500
1000
1000
FINAL SLOPE PROFILE
AT MID-HEIGHT
OF EACH BATTER
2000 MAX.
GRADE 20 / 20
CONCRETE OR 20 MPa
SPRAYED CONCRETE
CONCRETE MAINTENANCE
STAIRWAY
( SEE DRG. NO. C2101
FOR DIMENSIONS )
DN25 HEAVY SERIES
MILD STEEL TUBE
DN40 MEDIUM SERIES MILD STEEL POST
SEE DETAIL ’A’
SECTION A - A
OVERALL WIDTH TO BE SPECIFIED
(600 MIN.)
SEE DETAILS OF
STEEL ANGLE BASE
DN40 MEDIUM SERIES
MILD STEEL POST
(SEE NOTE 2)
100
EQ. EQ.
EQ
.E
Q.
100
SCALE 1 : 5
6
10025 25
2525
100
PLAN
ELEVATION END ELEVATION
4 NOS. 8 DIA.
STAINLESS STEEL
ANCHOR BOLT
WITH WASHER
ANCHOR BOLT WITH
MINIMUM 69
EMBEDMENT DEPTH
LEVEL OF
CONCRETE STEP
DETAILS OF STEEL ANGLE BASE
100 x 100 x 10 Tk
MILD STEEL ANGLE
DN40 MEDIUM SERIES
MILD STEEL POST
DN40 MEDIUM SERIES
MILD STEEL POST
SCALE 1 : 10
DOME-SHAPE METAL
CAP WELDED ON TOP
OF HOLLOW SECTION
6
10 M
IN.
DN25 HEAVY SERIES
MILD STEEL TUBE
DN40 MEDIUM SERIES
MILD STEEL POST
DETAIL ’A’
ô¤V¶u⁄{µ We Engineer Hong Kong’s Development
