HANDPIECE CATALOG - Medidenta

HYGIENE

ELECTRIC

HIGHSPEEDLOWSPEED

SURGICAL

HANDPIECE CATALOG

75 YEARS

CONTENTS

CHECK OUT OUR NEW PRODUCTS!

HIGHSPEED

HYGIENE

ELECTRIC & LABORATORY

MAINTENANCE

LOWSPEED

REPLACEMENT PARTS

SERVICE

03121521252832

Air Free™ Titan 90°

Air Free™ Titan 45° surgical

Prophy Pro Elite™

GINGICaine®

Pg.4

Pg.6

Pg.22

Pg.24

HIGHSPEED

Air Free™ Surgical

Turbo Torque Series

Atom™Micro-Head

Air Free™ Ortho75

YEARS

Pg.4

Pg.6

Pg.22

Pg.24

HIGHSPEED HANDPIECES | AIR FREE™ 90° ORTHO

The First 90° Highspeed Designed Specifically For Orthodontics.

The Air-Free does not allow any air to vent out of the head of the handpiece. This will eliminate air sensitivity and patient discomfort during removal of bonding adhesive (i.e. Invisalign attachments); providing your patients with a pain and stress free appointment.

OrthodonticsEliminate air sensitivity and patient discomfort during removal of bonding adhesive (i.e. Invisalign attachments)

AirA

ir

Traditional Handpiece

• Does not allow any air to vent out of the head of the handpiece

• Rear exhaust elimintates cold air sensitivity during

debonding

• Less pain means less stress for patients

• Allows debonding debris to slowly rise from the tooth

directly into suction.

Air-Free™ 90°4-Hole Backend

Air-Free™ 90° TitanCoupler stlye Backend

5

HIGHSPEED HANDPIECES | AIR-FREE™90° ORTHO

$499.99 | 1 YEAR WARRANTY | #AF90S

$599.99 | 1 YEAR WARRANTY | #AFT90

$159.99 | 1 YEAR WARRANTY | #AFTC

• Power - 18 Watts• Ceramic Bearings• Weight - 69.8g• Pure water jetstream cooling

• Power - 18 Watts• Ceramic Bearings• Weight - 2oz• 360° swivel

• Allows for 360° swivel when attached to Air Free Titan• Pilot Holes for Venting Air through back-end• Must Be Used with Any Air-Free Titan™ handpieces

• Head Height - 13.6mm• Head Diameter - 10.6mm • Coupling - 4 Hole• Titanum Coated Stainless steel shell

• Head Height - 13.6mm• Head Diameter - 10.6mm • Coupling - Quick Disconnect• Completely Titanium Shell

AIR FREE™ 90°(4H)

AIR FREE™ 90° TITAN

AIR FREE™ TITAN COUPLER

All air is exhausted via

rear ports.

90° TITAN

HIGHSPEED HANDPIECES | AIR-FREE™ TITAN 45° SURGICAL

The Air Free 45° handpiece features superior torque for smooth cutting without bog down, a long lasting titanium shell and also offers practitioners the capability of working with a completely air-free oral cavity. Ideal for mesioangular impactations and third molar extractions.

All Air Is Rear Vented All air is vented through pilot holes

located on the back-end.

TitaniumTitanium in the shells provide scratch, stain, and corrosion resistance for a

long lasting and durable body.

Air Free Head Puts Safety FirstDoes not allow any air to vent from

the head, for a safe, risk-free surgical procedure.

Ideal For Mesioangular Impactations And Third Molar Extractions

Other Surgical highspeeds exhaust air into the surgical site through the headcap.

The Air Free 45° Gives you an Air Free surgical site ensuring your patient’s safety.

7

HIGHSPEED HANDPIECES | AIR-FREE™ 45° SURGICAL

45°

TITAN 45°

$699.99 | 1 YEAR WARRANTY | #AFT45


• 100% Titanium shell• Power - 22 Watts• Ceramic Bearings• Weight - 2oz

• Allows for 360° swivel when attached to Air Free Titan• Pilot Holes for Venting Air through back-end• Must Be Used with Any Air-Free Titan™ handpieces

• 360° swivel• Head Height - 13.6mm• Head Diameter - 10.6mm • Coupling - Quick Disconnect

AIR FREE™ 45° TITAN

AIR FREE™ TITAN COUPLER

All air is exhausted via

rear ports.

AIR FREE 45 (4H)

$599.99 | 1 YEAR WARRANTY | #AF45

• Titanium coated stainless steel shell• Power - 20 Watts• Ceramic Bearings• Weight - 69.8g

• Pure water jetstream cooling.• Head Height - 13.6mm• Head Diameter - 10.6mm • Coupling - 4 Hole

HIGHSPEED HANDPIECES | TURBO TORQUE™ 1000 SERIES

Turbo Torque

High Retention ChuckCapable of holding up to 10lbs (over

40N) eliminating the risk of bur slippage ensuring patient and doctor safety.

Patented Impeller DesignDesign of airflow circulation allows

the air to be guided by a special asymmetrical impeller.

Multi- Port Water SprayEnsures that the bur and working site are properly cooled during the

procedure.

TURBO TORQUE 1200 (MINI HEAD)

$499.99 | 1 YEAR WARRANTY | #TT1200

• Power - 20 Watts• Ceramic Bearings• Weight - 40.5g• RPM - 350,000

• Head Height - 12.5mm• Head Diameter - 10.6mm • Coupling - 4 Hole

Office Workhorse

9

HIGHSPEED HANDPIECES |

22Wattsof Power

TURBO TORQUE™ 2000 SERIES

Titanium Easy Grip CoatingScratch and corrosion resistant for a

long lasting shell.

25K Lux - Bright Fiber OpticsDelivers 25,000 LUX to your procedure

site even after repeated sterilization.

Up To 22 Watts Of PowerAllowing you to cut smoothly and confidently without any bog down.

TURBO TORQUE 2200 (MINI HEAD)

$799.99 | 2 YEAR WARRANTY | #TT2200

• Power - 22 Watts• Ceramic Bearings• Weight - 54g• RPM - 350,000

• Head Height - 12.5mm• Head Diameter - 10.6mm • Coupling - Multiplex (Multiflex)

Ultimate Performance

Up To:

HIGHSPEED HANDPIECES |

HIGHSPEED HANDPIECES | ATOM™ MICRO- HEAD

AIR KING ESSENTIAL SERIES

Micro-Head Lightweight & Slim Body Low Weight, Low Noise, High Power

ATOM

ATOM FO (POWER OPTIC) - 5 HOLE OPTIC

$399.00 | 1 YEAR WARRANTY | #ATOM

$459.99 | 1 YEAR WARRANTY | #ATOM-FO

• Power - 16.5 Watts• Ceramic Bearings• Weight - 1 oz• RPM - 405,000-420,000

• Head Height - 11.0mm• Head Diameter - 10.2mm • Coupling - 4 Hole

16.5

Wattsof Power

AIR KING | MANUAL CHUCK• Ceramic Bearings• Single Port Water Spray• Weight - 58g• RPM - 400,000

• Ceramic Bearings• Single Port Water Spray• Weight - 55g• RPM - 420,000

• Coupling - 4 Hole• Head Height - 14.9mm• Head Diameter - 11.2mm• 1 Year Warranty

• Coupling - 4 Hole• Head Height - 11.89mm• Head Diameter - 10.2mm• 1 Year Warranty

AIR KING | PUSH BUTTON

MINI- $219.99 | #AK-CMPB4HSTANDARD- $219.99 | #AK-CPB4H

MINI- $169.99 | #AK-CMSD4HSTANDARD- $169.99 | #AK-CSD4H

10.2mm

1oz

11mm

11

HIGHSPEED HANDPIECES | COUPLERS

MINI- $219.99 | #AK-CMPB4HSTANDARD- $219.99 | #AK-CPB4H

5-HOLE FIBER OPTIC COUPLER (KAVO™ STYLE)

6-PIN LED COUPLER (KAVO™ STYLE)

4-HOLE COUPLER (KAVO™ STYLE)

$249.00 | 1 YEAR WARRANTY | #CP5M

$269.00 | 1 YEAR WARRANTY | #MK-QC6016K

$149.00 | 1 YEAR WARRANTY | #MK-QC4014K

• 5-Hole connection• Glass rod conductor• Attach any Kavo style back-end

handpiece to this coupler

• 6-Pin connection• LED bulb• Compatible with all Kavo™

Style Handpieces

• 4-Hole connection• Attach any Kavo style back-end

handpiece to this coupler

• Allows for 360° swivel of the attached handpiece




• Allows for 360° swivel when attached to Air Free Titan• Pilot Holes for Venting Air through back-end

• Must Be Used with Any Air-Free Titan™ handpieces

AIR FREE™ TITAN COUPLER - 4-HOLE


B.A. Electric Highspeed

Denti-Lab

13

ELECTRIC & LABORATORY |


B.A. 1-5 INCREASING CONTRA ANGLE

PVD CoatingThis unique Physical Vapor Deposition

coating provides greater protection against abrasive wear.

3-Port Water SprayEnsuring that the bur and working site are properly cooled during the

procedure.

24 Month WarrantyThis German made handpiece is

backed with a 2 year warranty so you can purchase with confidence.

ELECTRIC 1:5 INCREASING ANGLE W/ OPTICS

$899.00 | 2 YEAR WARRANTY | #BA-C/APBO1-5

• 1:5 Increasing transmission• Glass rod optics• Max speed 200,000 RPM• Head height 15.2mm

• Head Diameter 9.72mm• Weight 69.9g• Coupling INTRAmatic Lux

ELECTRIC 1:5 INCREASING ANGLE NON-OPTIC

$799.00 | 2 YEAR WARRANTY | #BA-C/APB1-5

• 1:5 Increasing transmission• Max speed 200,000 RPM• Head height 15.2mm

• Head Diameter 9.72mm• Weight 69.9g• Coupling INTRAmatic

24MonthWarranty

ELECTRIC & LABORATORY | DENTI-LAB - HEAVY DUTY LABORATORY UNIT

DENTI-LAB “E” TYPE MOTOR ONLY

DENTI-LAB KIT INCLUDES:

DENTI-LAB DORIOT MOTOR ONLY

$299.99 | 1 YEAR WARRANTY | #DLEM

$499.99 | 1 YEAR WARRANTY

$299.99 | 1 YEAR WARRANTY | #DLDM

• Accepts any E-type attachment• 0-35,000 RPM

• High torque at all speeds• Variable speed range: 0-35K RPM• Variable foot control• Solid state transistorized feed-back circuitry maintains speeds

under heavy loads• Double rear cooling vents allow for continuos operation without

overheating• A heavy duty motor to withstand the laboratory environment• No lube required

• Accepts lab burs

• 0-35,000 RPM

• Control box• Motor• Variable foot control• Motor stand

Kit With Doriot Motor | #DLDKIT Kit With E-Type Motor | #DLEKIT

LOWSPEED

Elite Straight

Elite Motor

Attachments$499.99 | 1 YEAR WARRANTY

LOWSPEED HANDPIECES | MEDITORQUE™ ELITE 3PC. KIT

Meditorque Elite25K E-Type Motor

40K Rpm Nose Cone

40K Rpm Contra Angle

25% More PowerCapable of delivering a smooth and

powerful 25,000 RPM, more power than most ‘E’ type motors on the market.

Titanium Finished Stainless Steel Capable of withstanding the high demand of your office, preventing corrosion and

scratches for long lasting operation.

1 Year WarrantyThanks to its strong and reliable build

quality, we are proud to back this handpiece with a full 1 year warranty.

12MonthWarranty

MEDITORQUE ELITE 3PC KIT (25K)

$699.99 | MADE IN JAPAN WARRANTY - MOTOR: 1 YEAR ATTACHMENTS: 6 MONTHS | #ME-KIT

• 1 - Elite Motor (25K)• 1 - Elite Nose Cone (40K)

• 1 - Elite Latch Contra Angle (30K)

17

LOWSPEED HANDPIECES |

LATCH TYPE | $259.99 | 6 MONTH WARRANTY | #ME-E40LP FRICTION GRIP | $299.99 | 6 MONTH WARRANTY | #ME-E40FGP

$699.99 | MADE IN JAPAN WARRANTY - MOTOR: 1 YEAR ATTACHMENTS: 6 MONTHS | #ME-KIT

MEDITORQUE™ ELITE ATTACHMENTS

ELITE PB CONTRA ANGLE (40K)

• Push button head• Accepts friction grip burs / Latch type burs• Max speed: 40,000 RPM• Made in Japan

MEDITORQUE ELITE MOTOR (25K)

ELITE NOSECONE (40K)

$399.99 | 1 YEAR WARRANTY | #ME-EM

$199.99 | 6 MONTH WARRANTY | #ME-EN

• 0-25,000 RPM• Forward and reverse settings• Accepts all E-type attachments• Made in Japan

• Accepts straight burs• Twist Locking chuck• Max speed: 40,000 RPM• Made in Japan

1:1 CLASSIC LATCH TYPE ANGLE (30K)

$169.99 | 6 MONTH WARRANTY | #ME-E30L

• Swing latch head• Accepts latch type burs• Max rpm: 30,000 RPM

1:1 CLASSIC MINI LATCH TYPE ANGLE (20K)

$169.99 | 6 MONTH WARRANTY | #ME-E20ML

• Mini swing latch head• Accepts latch type burs• Max rpm: 20,000 RPM

LOWSPEED HANDPIECES | MEDITORQUE ELITE ATTACHMENTS

4:1 REDUCTION CONTRA ANGLE (PUSH BUTTON)

$309.99 | 6 MONTH WARRANTY | #MD-PBAL4-1

• Push button head• Accepts latch type files• Attach this handpiece to any 20K rpm motor to run at 5K rpm• 4:1 gear reduction• E-type fitting

K-ENDO ELITE | HAND FILE RECIPROCATING ANGLE

$549.99 | 6 MONTH WARRANTY | #K-ENDO

• Reciprocates hand files • Attach this handpiece to any 20K rpm motor to run at 5K rpm• Relieves the stresses of hand filing• 4:1 gear reduction

• E-type fitting

This reciprocating handpiece accepts hand files to relieve stresses of hand filing manually. The push button head makes it easy to insert and remove the files.

INTERPROX ELITE | INTERPROXIMAL CONTRA ANGLE

$499.99 | 6 MONTH WARRANTY | #ME-INT

• Small head for increased visibility for all procedures

• E-type fitting

An “E” style contra angle that is ideal for any procedure which requires an back and forth reciprocating motion. The Interprox “E” is ideal for interproximal procedures such as reduction, polishing, enamel stripping or restorative orthodontic procedures.

1.6 mm

4:1 PROPHY NOSE CONE

$299.99 | 6 MONTH WARRANTY | #MD-NC4-1

• Attach this handpiece to any 20K rpm motor to run at 5K rpm• Friction Grip chuck / push-pull• 4:1 gear reduction• E-type fitting

• Accepts disposable prophy angles only

19

LOWSPEED HANDPIECES | MEDITORQUE ELITE STRAIGHT (25K)

INTERPROX ELITE | INTERPROXIMAL CONTRA ANGLE

25% More PowerCapable of delivering a smooth and

powerful 25,000 RPM, more power than most ‘E’ type motors on the market.

Titanium Finished Stainless Steel Capable of withstanding the high demand of your office, preventing corrosion and

scratches for long lasting operation.

1 Year WarrantyThanks to its strong and reliable build

quality, we are proud to back this handpiece with a full 1 year warranty.

12MonthWarranty

360° Swivel

MEDITORQUE ELITE STRAIGHT

$499.99 | 1 YEAR WARRANTY | #ME-DM25

• 25K RPM• Forward & Backward settings• Backend built-in swivel• Compatible with doriot angles and straight burs.• Made in Japan

Prophy Pro Elite

Ultra Scalers

HYGIENE

LUBE

GINGIcaine®

HYGIENE | PROPHY PRO™ ELITE

PROPHY PRO ELITE™

$499.99 | 1 YEAR WARRANTY | #ME-DM5H

• No lube required• 5,000 RPM• Accepts disposable prophy angles only• 360 degree swivel• Lightweight• Quiet handpiece helps to reduce patient anxiety

• Made in japan

LUBE

PowerfulDelivering constant torque for

all prophy applications at a max speed of 5000 RPM.

Lightweight DesignIncreased comfort with lightweight design and improved manuverability with a 360°

swivel to eliminate hand fatigue.

Friction Grip ChuckEasy friction grip chucking system.

Just push into place and pull to remove.

23

HYGIENE | ULTRA SCALERS

World’s first built-in vibrating generator produces frequency of 17,000 Hz at the tip while the traditional air-driven scalers provide 3,000 Hz to 9,500 Hz. This helps efficiently remove tough calculus, plaque, and stains. Made in Japan.

The Most Powerful And Gentle Air Scaler

Built In GeneratorWith frequency up to 17,000 Hz. 3x the

power of traditional air scalers

QuietOnly slight noise and air exhaust sound

are audible for maximum comfort

SafeCan be used on patients with

implanted instruments

ULTRA SCALER (4-HOLE TYPE)

ULTRA SCALER (KAVO™ TYPE)

$509.99 | 1 YEAR WARRANTY | #USCALKIT

$569.99 | 1 YEAR WARRANTY | #USCALKITQD

• Kavo compatible connection• 3 tips included: 1x Perio, 1x Universal, 1x Sickle

• 4-Hole connection• 3 tips included: 1x Perio, 1x Universal, 1x Sickle

PERIO TIP

UNIVERSAL TIP

SICKLE TIP

$59.99 | #USCALT1

$59.99 | #USCALT2

$59.99 | #USCALT3

• Designed for root / interproximal areas and sub / supra gingival areas.

• Designed for curved surfaces and sub / supra gingival areas.

• For removing obstinate tar and stain adhesion

HYGIENE | GINGICAINE® TOPICAL ANESTHETIC

Perfect Control At Your Fingertips

Product Features:• 20% Benzocaine Formula

• Syringe Dispensed For Easy Application Anywhere In The Mouth.

• Proprietary Microneedle Tip Featuring

A Rounded End To Eliminate Poking Or Tearing Of The Sulcus During Delivery.

• Quick 15-20 Minute Onset.

• Flows Smoothly With No Gritty Feel.

• Great Strawberry Flavor, With No Bitter Aftertaste.

GINGICAINE

$31.99 | 3+1FREE

• (20) filled 24mL syringes included• (40) 7mm guage marked and rounded end syringe

tips, to eliminate poking or tearing.

GINGIcaine® is a local anesthetic for topical application, The active ingredient is 20% Benzocaine in a flavored polyethylene glycol base sweetened with saccharin.

HANDPIECE MAINTENANCE

TT Care 100+

iSpray Lubricant

MAINTENANCE | TT CARE 100+ HANDPIECE LUBRICATION UNIT

TTcare 100+ is an easy to use automatic lubrication unit that will save your office time and extend the life of your handpieces. Its user-friendly interface simplifies the process of cleaning handpieces. It takes only 15 seconds to clean each handpiece, and less than one minute for three at a time.

• Complete Internal Cleaning, Lubricat-ing & Purging

For simple, proper care of up to 3 handpieces

• Unique Built-In E-Type Moto Turns Gears on Attachments

For superior maintenance of all moving parts

• Autochuck Maintenance StationExtends bur retention performance

• Most Affordable Maintenance System on the market

Uses economical, easily replaceable spray cans

• Active Internal Oil Suction

Pulls excess oil and debris directly onto absorption pad to minimize cleanup

• Unit Designed for Easy Clean-up

With easily removable internal tray, door & absorption pads

• Rapid Purge FeatureThoroughly eliminates debris & excess lubricant

$1899.00 | 2 Year Warranty

$1,899.99 TTCARE 100+

• 1 TTcare 100+ Unit• 1 can of I Spray Lube - 500ml• 1 E-Type Adapter• 2 4-Hole Adapter• 1 Chuck Care Adapter• 1 Oil Tray• 6 Oil Tray Liners

Accessories I Spray Lubrication 500ml:

Absorption Pad(10pk):

Kit Includes:

$14.99 Oil Tray: $20.99

Blister: $7.99

Handpiece Adapters$69.99 each

• 4-Hole/Midwest• E-Type• Kavo• W&H• NSK• Bien-Air• Sirona• Star• Midwest C/A• 2-Hole/Borden

Dimensions: 15.25” H ×11.5” W×10” DWeight: 19.85 lbsSound Level: <60 (65) dB (A)Compressed Air: 4-6 bar (58-87 ps)

1 $39.996 $29.99

27

MAINTENANCE | I SPRAY HANDPIECE LUBRICANT

I SPRAY

I SPRAY NOZZLES

$39.99 | #ISPRAY

$9.99

For Manual lubrication or automatic lubrication (TTCare 100+) • Lubricates all moving parts of handpiece while driving out debris utilizing pressured spray.

4/5 Hole #ISN-4/5

E-Type#ISN-LSE

Spindle#ISN-CS

Kavo#ISN-KAVO

REPLACEMENT PARTS

ReplacementTurbines

ReplacementHead Caps

29

REPLACEMENT PARTS |

REPLACEMENT PARTS

MIDWEST™ | NSK™ | STAR™ | PALISADES™ TURBINES

T-MW860 | $159.99

MIDWEST QUIET-AIR MANUAL CHUCK TURBINE CARTRIDGE / RADIAL BEARINGS / CERAMIC

T-MWQA | $179.99

MIDWEST QUIET-AIR LEVER TURBINE CAR-TRIDGE / ANGULAR CONTACT / CERAMIC BEARINGS

T-MWTPB | $199.99

MIDWEST TRADITION / XGT PUSH BUTTON TURBINE CARTRIDGE / ANGULAR CONTACT BEARINGS / CERAMIC

T-MWTL | $189.99

MIDWEST TRADITIONAL LEVER / CEAMIC / TURBINE CARTRIDGE

T-NSKMM | $199.99

TURB. ASSY-NSK TIMAX MINI X500L PB CERAMIC

T-NSKTMS | $199.99

NSK X600L / X600KL / NL9000S PUSHBUTTON TURBINE CARTRIDGE / ANGULAR CONTACT BEARINGS / CERAMIC

T-NSKTMT | $199.99

NSK X700L / X700KL / NL9000T PUSH BUTTON TURBINE CARTRIDGE / AGULAR CONTACT BEARINGS / CERAMIC

T-MWTS | $159.99

MIDWEST TRADITION/300 SE MANUAL CHUCK TURBINE CARTRIDGE / RADIAL BEARINGS / CERAMIC

T-MWS360 | $219.99

MIDWEST STYLUS/ STYLUS LITE STANDARD PUSH BUTTON TURBINE CARTRIDGE / ANGULAR CONTACT / CERMAIC BEARINGS

T-NSKSM | $199.99

TURB. ASSY- NSK S-MAX M MODEL M600/ M600L ANGULAR CERAMIC

T-ST823 | $209.99

STAR 430 / SOLARA LUBEFREE PUSH BUTTON TURBINE CARTRIDGE / ANGULAR CONTACT BEARINGS / CERAMIC

T-PD826 | $199.99

PALISADES DENTAL IMPACT AIR 45 PUSH BUTTON TURBINE CARTRIDGE / RADIAL BEARINGS / CERAMIC

Midwest™ | 1Year Warranty

NSK™ | 1Year Warranty

Star™ | 1Year Warranty

Palisades™ | 1Year Warranty

REPLACEMENT PARTS | KAVO™ TURBINES | HEAD CAPS

T-KV8000 | $209.99

KAVO GENTLESILENCE 6500BR / 8000B PUSH BUTTON CERAMIC TURBINE CARTRIDGE

T-KV6500 | $209.99

TURB. ASSY- KAVO GENTLESILENCE 6500B PUSH BUTTON CERAMIC

T-KV635 | $219.99

TURB.ASSY-KAVO / MIRA LUX 635B PUSH BUTTON CERAMIC / TURBINE CARTRIDGE

T-KV5000 | $219.99

TRB .ASSY-KAVO 4500B / 4500BR / M4500L / 500B PUSH BUTTON

T-KV615 | $199.99

TRB .ASSY-KAVO SMARTTORQUE MINI S605 C / S615 L PUSH BUTTON

T-KV619 | $199.99

TRB .ASSY-KAVO SMARTTORQUE S609 C / S619 L PUSH BUTTON

T-KV637 | $229.99

TRB .ASSY-KAVO BELLATORQUE MINI 637B / 637C / 635BR PUSH BUTTON

T-KV660 | $219.99

TRB .ASSY-KAVO SUPERTORQUE 655B / 655C / 659BR / 660B PUSH BUTTON

T-KV659 | $229.99

TRB .ASSY-KAVO SUPERTORQUE 659B PUSH BUTTON SUPERTORQUE CERAMIC

T-KV675 | $219.99

TRB .ASSY-KAVO EXPERTTORQUE E675 L / E677L PUSH BUTTON

T-KV9000 | $229.99

DYNAMIC PERFECTION PLUS TURBINE - KAVO M8900L / M9000L KAVO MASTER TORQUE

T-KV679 | $219.99

TURB. ASSY-KAVO EXPERTTORQUE E679 L / E680L / E680LM / E680 C PB ANGULAR / CERAMIC

P-MWTLHC | $79.00

HEAD CAP- MIDWEST TRADITION LEVER

P-ST430 | $49.00

STAR 430 / VISTA / SOLARA / STAR-FLEX PUSH BUTTON HEADCAP

P-KV | $59.00

HEAD CAP - KAVO 4500B/BR, M4500L, 5000B PUSH BUTTON

P-KV637 | $79.00

KAVO 635B / 637B PUSH BUTTON HEAD CAP

P-MWXGT | $59.00

MIDWEST TRADITION / XGT PUSH BUTTON HEAD CAP

P-PDIA45 | $59.00

HEAD CAP - IMPACT AIR 45 PUSH BUTTON

P-KV | $79.00

PUSH BUTTON HEAD CAP - KAVO 6500B / 6500BR / 8000B

Kavo™ | 1Year Warranty

Head Caps | 1Year Warranty

31

REPLACEMENT PARTS | MEDIDENTA™ TURBINES

A.K. PUSH BUTTON HEADCAP - $24.99 | #P-AKHCPBA.K. PUSH BUTTON MINI HEADCAP - $24.99 | #P-AKHCMPBA.K. MANUAL CHUCK HEADCAP - $14.99 | #P-AKHCSDA.K. MANUAL CHUCK MINI HEADCAP - $14.99 | #P-AKHCMSD

AIR KING PUSH BUTTON CANISTER TURBINE

AIR KING MANUAL CHUCK CANSITER TURBINE

Adult:$99.99 | 6 Month Warranty | #T-AKSPBCMini:$99.99 | 6 Month Warranty | #T-AKMPBC

Adult:$64.99 | 6 Month Warranty | #T-AKSSDCMini:$64.99 | 6 Month Warranty | #T-AKMSDC

AIR KING™ PARTS AND ACCESSORIES

FORESIGHT TORQUE HEAD TURBINE

TURBO TORQUE 2400 (POWER) TURBINE

FORESIGHT POWER HEAD HEADCAP - $25.99 | #P-FSSHCFORESIGHT MINI / SURGICAL HEADCAP - $25.99 | #P-FS45HCFORESIGHT & AIR FREE CAP WRENCH - $9.49

TURBO TORQUE 2400 HEADCAP - $49.99 | #P-TT24HCTURBO TORQUE 2200 HEADCAP - $49.99 | #P-TT22HCTURBO TORQUE 1400 HEADCAP - $37.50 | #P-TT14HCTURBO TORQUE 1200 HEADCAP - $37.50 | #P-TT12HCTURBO TORQUE CAP WRENCH - $34.99 | #P-TTSCW

TURBO TORQUE 1400 (POWER) TURBINE

FORESIGHT MINI HEAD TURBINE

FORESIGHT 45 SURGICAL TURBINE

TURBO TORQUE 2200 (MINI)TURBINE

TURBO TORQUE 1200 (MINI)TURBINE

$199.99 | 1 Year Warranty | #T-FSS

$279.99 | 1 Year Warranty | #T-TT2400 $259.99 | 1 Year Warranty | #T-TT1400

$199.99 | 1 Year Warranty | #T-FSM

$229.99 | 1 Year Warranty | #T-FS45

$279.99 | 1 Year Warranty | #T-TT2200 $259.99 | 1 Year Warranty | #T-TT1200

FORESIGHT™ & AIR FREE™ 90 SERIES PARTS AND ACCESSORIES

TURBO TORQUE™ PARTS AND ACCESSORIES

It is highly recommended that a Medidenta certified technician install all surgical turbines.

HANDPIECE REPAIR

33

Turbine Replacement

• No Charge for turbine installation• OEM parts used• 6-2 Month Warranty

Turbine Overhaul

• Replacement Of Ceramic Bearings• Replacement of O-Rings anf Seals• clearing Of Air and Water Tubes• Torque and Concentricity Tested under Load of 32-40 PSI

Brands• Midwest™ Tradition / Quiet Air / XGT• Midwest™ Styles• Star™ 430• Kavo™ (all models)• Lares™• Bien Air™• W+H™ / Adec™• All Major Brands

HANDPIECE REPAIR |

SERVICE |

SERVICE |

SERVICES

HIGHSPEED REPAIRS

LOWSPEED REPAIRS

Medidenta’s Repair Department offers quality in-house repairs for all major brands of highspeed and lowspeed handpieces and much more. Along with quality repairs, we offer free estimates, 24-48 hour turn around, and 6-12 month warranties on most repairs.

Trade in your used and worn down handpieces for discounts towards brand new handpieces.

We offer free UPS pick up directly from your office. Call or click to schedule a free pick up.

Have any questions about repairing or maintaining your handpieces? Give us a call!

Trade-In Program Free UPS Pick Up Ask an Expert

Repair:

• Replacement of bearings, o-rings, seals, rotor vanes,

and all other parts required to achieve optimum

performance using OEM parts.

• Thorough cleaning and lubrication of all internal

components.

• Torque tested under load of 35 – 45 PSI

• 6-12 month warranty

Brands• Midwest Shorty™ Tru-Torc 1 speed• Midwest Shorty™ Tru-Torc 2 speed• Midwest Rhino™• Star Titan™ I, II, III• Micronote™• NSK™• Kavo™• W+H™ / Adec™• Bien Air™• All Major Brands

** Contact Us For A Free Estimate 800.221.0750

HANDPIECE REPAIR |

• Repair:

• Replacement of suspension tube, air rotar, o-rings, seals, and all

other parts applicable using OEM parts.

• Purging and cleaning of water lines.

• Test to manufacturer specifications

• 6-month warranty

Brands• Kavo™• Star™• Midwest™• NSK™• All Major Brands

SERVICES CONT.

Standard Overhaul Service Includes:

• Replacement of bearings, gears, springs, and seals using OEM

• parts

• Thorough cleaning and lubrication of all internal components



Brands• Kavo™• Star™• Midwest™• NSK™• W+H™• All Major Brands

• Repair:

• Replacement of bearings, gears, drive shaft, springs, washers, and

all other parts when applicable using OEM parts

• Thorough cleaning of all internal components

• Test to manufacturer specification

• 6 – 12 Month warranty

Brands• Kavo™• Star™• Sirona™• NSK™• Bien Air™• Adec™ / W+H™• Brasseler™• All Major Brands

• Repair:

• Replacement of bearings, seals, springs, cartridges using OEM

parts



• 90 Day- 6 month Warranty.

Brands• Kavo™• Star™• Midwest™• NSK™• Adec™ / W+H™• All Major Brands

• Repair:

• Replacement of Glass rod

• Rebonding of loose heads (Most models)

• Thorough cleaning of internal components

• 6- Month warranty.


SERVICE |

SERVICE |

SERVICE |

SERVICE |

SERVICE |

ATTACHMENT REPAIR

AIR- SCALER REPAIR

ELECTRIC 1:5 REPAIR

LOWSPEED HEAD ATTACHMENT REPAIR

FIBER OPTIC REPLACEMENT

35

SERVICE |

• Repair:

• Replacement of suspension tube, air rotar, o-rings, seals, and all

other parts applicable using OEM parts.

• Purging and cleaning of water lines.




RETURN AND EXCHANGE POLICY

Standard Overhaul Service Includes:

• Replacement of bearings, gears, springs, and seals using OEM

• parts




Brands• Kavo™• Star™• Midwest™• NSK™• W+H™• All Major Brands

• Repair:

• Replacement of bearings, gears, drive shaft, springs, washers, and

all other parts when applicable using OEM parts

• Thorough cleaning of all internal components

• Test to manufacturer specification

• 6 – 12 Month warranty

Brands• Kavo™• Star™• Sirona™• NSK™• Bien Air™• Adec™ / W+H™• Brasseler™• All Major Brands

• Repair:

• Replacement of bearings, seals, springs, cartridges using OEM

parts



• 90 Day- 6 month Warranty.

Brands• Kavo™• Star™• Midwest™• NSK™• Adec™ / W+H™• All Major Brands

• Repair:

• Replacement of Glass rod

• Rebonding of loose heads (Most models)

• Thorough cleaning of internal components

• 6- Month warranty.

Brands• Kavo™• Star™• Midwest™• NSK™• All Major Brands Kavo™, Star™ Midwest™, NSK™, Adec™, W+H™, Brasseler™, Sirona™, Bien air™, Are are trademarks of their respecitve

holders. Use Of their name does not imply any affiliation or endorsement from them.

Return & Exchange Policy

Supplies purchased from Medidenta are guaranteed with a 30 day return policy. When your order is received, please examine it carefully. If for any reason, you are not satisfied, please call 800-221-0750 for a valid Return Merchandise Authorization (RMA) number and have your invoice available for reference. Upon receipt of the returned product, Medidenta will exchange, refund or credit the item, less adjustments for shipping and handling. All products must be returned unused, unmarked and in original packaging with seal unbroken. Claims must be reported within 30 days of invoice date. All returned merchandise is subject to inspection. Any merchandise returned to Medidenta in an unsellable condition will NOT be eligible for credit.

Equipment, such as handpieces, motors and the TT Care Lubrication Station can only be returned for credit if unopened and unused. Once the product has been opened, the product is yours. It is only eligible for repair or replacement in event of a defect.

Customer must request a return for refund within 30 days after invoice date. No refunds are issued after 30 days. All returns should be shipped in a traceable manner, such as Fed Ex or UPS. The shipment fee is non-refundable. Medidenta will not be responsible for any shipping loss.You, as the customer, agree to pay for all shipping charges and accept risk of loss or damage for the product being returned.Items returned must be returned in new, unused, resalable condition without any markings and in the original packaging with the seal unbroken. Damaged merchandise will not be eligible for return.All returns require a Return Merchandise Authorization (RMA) Number. Medidenta will not accept any return without a valid RMA number. The package will be returned at sender’s expense. Please call in to request an RMA number.Returns must include a copy of the original invoice. Credit cannot be issued without a copy of the original invoice. Please allow 5-7 business days to process your return.Medidenta reserves the right to refuse service that would void the return policy.Please note not all items are covered by our return policy. OSHA regulations prohibit the return of syringes, needles, solutions etc. No credit on special orders or drop shipments from the supplier.

Return Merchandise Authorization (RMA) Number

Return Merchandise Authorization Numbers will be valid for a period of 30 days from the date of issuance. Returned merchandise received after the expiration date will not be accepted for credit. The customer is responsible for the care of the returned items and the insurance through the shipping carrier. Any product received without a valid RMA number will be returned to sender. All items may be subject to restocking fee.Order Discrepancies or Damaged Shipments

Customers must inform Medidenta of any missing, damaged or incorrect items from your order within 7 days of the delivery date. In case of damaged merchandise, please keep the original packaging and contact your delivery company (UPS) for a damage inspection report. Please contact our Customer Service Department at 800-221-0750 to review the order and will respond within 48 hours.

Price Adjustment

Prices are subject to change at any time. We offer a one-time price adjustment if an item is marked down within fourteen (14) days of the date on your invoice. To obtain a price adjustment, please call 800-221-0750 with your invoice ready. If you are within the deadline, we’ll refund you the difference in your original form of payment. Items purchased with a promotional discount are NOT eligible for price adjustments.

For any other questions regarding returns and exchanges, please call us at 800-221-0750 Monday through Friday from 6am to 5pm PST.

We thank you for your loyalty and look forward to your business.

DisclaimerProducts in this catalog are intended for use by licensed dentists only. Medidenta is not responsible is not liable for typographical errors.For any other questions regarding returns and exchanges, please call us at 800-221-0750 Monday through Friday 7am to 5pm PST.We thank you for your loyalty and look forward to your business.

Return for Refund or Exchange: 30 DaysRestocking fees apply: 15% of Final Price

Return Address: Medidenta Returns731 Pilot Rd, Suite LLas Vegas, NV 89119

Check Out Our Other Products:

Request our Bur Catalog, and our Endo Catalog or Download them from www.medidenta.com

800.221.0750 • www.Medidenta.com

HANDPIECE CATALOG - Medidenta

Documents

Transcript of HANDPIECE CATALOG - Medidenta