HAND TOOLS - Metco Supply

HAND TOOLS

44 ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED

Vaughn Hammers

Claw Hammer with Fiberglass Handle

#S16F, 16 oz. $23.10 / Ea

Rip Hammers with Fiberglass Handle

#S16FR, 16 oz. $23.40 / Ea

Tubular-Handled Rip Hammers

#S16TR, 16 oz. $18.45 / Ea

Brick Hammers

#BL16, 16 oz. $23.70 / Ea#BL24, 24 oz. $25.10 / Ea

Carbide-Blade Brick Hammers#BL24TC, 24 oz. $29.85 / Ea

Carpenter's Half Hatchet

#SH2, 22 oz. $27.90 / Ea

Original Super-Bar 15" 4-use Prybar

#B215 $13.95 / Ea

Ames/True Temper

Sledge Hammers• Designed to be used in heavy hammer

applications for striking wood, concrete,metal, and stone

• Common uses are drifting heavy timbersand striking spikes, cold chisels, rockdrills and hardened nails

#1196900, 4# $18.75 / Ea#1197400, 6# $28.50 / Ea#1197900, 8# $31.70 / Ea#1199100, 10# $36.50 / Ea#1199400, 12# $42.15 / Ea#1199700, 16# $60.60 / Ea

Tampers• Invaluable tools for site preparation

work, tampers are used to pack andlevel soil

• Heavy cast metal bases with reinforcedcorners and a painted aluminum finish

• Ash handles are tapered for comfortduring use

#1133400, 8" x 8" $38.65 / Ea#1133700, 10" x 10" $45.70 / Ea

#2014100 Tamper Handle $12.60 / Ea

Wrecking Bars• Slight offset chisel end opposite a

gooseneck bend with a nail pulling slot• Produced from hexagon stock, each

product features properly shaped andground chisels and sharp, clean nailslots

#1170500, 3/4" x 24" $10.65 / Ea#1171000, 3/4" x 30" $13.00 / Ea

Make-Your-Own Tool BoxKits

JHK-1: Jr, 1 hinge, 13"long• Measures 4" high, 5"

wide, and 13-12" long• Included for each

toolbox: 1 steelhinge (13-1/4") plain,1 nickel-plated steel handle, zincplated catch strike, 4 corners

$6.15 / Ea

MHK-1: Large, 2hinges, 18" long

• Measures 7" high,6" wide, and 18" long

• Included for eachtoolbox: 2 steel hinges (17-3/4") plain,1 heavy duty plastic handle, 1 padlockhasp & staple, 2 plated drawbolts, 4corners $7.50 / Ea

WHK-1: Large, onehinge, 18" long

• Measures 7" high6" wide, and 18" long

• Included for eachtoolbox: 1 steel hinge (17-3/4") plain,1 heavy duty plastic handle, 1chrome plated drawbolt, 4 corners

$6.25 / Ea

For Sheet Metal To Build Tool BoxesFrom Kits, See Page 7.

Tool Box Hardware

Steel Continuous Hinge (.025" thick)13-1/4" $.90 / Ea17-3/4" $1.15 / Ea

HandlesBlack Plastic $1.40 / EaSteel Plated $1.55 / Ea

Chrome Plated Steel Corner $.35 / Ea

Chrome Plated Steel Drawbolt & Catch$1.70 / Ea

Zinc Plated Steel Catch & Strike$2.20 / Ea

Padlock Hasp & Staple $.75 / Ea

HAND TOOLS

45ORDER @ www.metcosupply.com - CALL 800-521-8811 FOR ITEMS NOT LISTED

Long Nose Pliers• Slender, perfectly mated jaws with no

side wobble provide a firm grip onfine work in tight places

• Sharp, hand honed side cutters• Fine polished drop forged steel• Blue plastic comfort grips

With Side Cutter#326, 6" $19.60/Ea#317, 7-1/2" $20.15/Ea#318, 8" $25.40/Ea

Curved Nose Without Side Cutter#386, 6" $19.95 / Ea

Linemen's/Electrician Pliers• Heavy duty, precision made of

special grade drop forged steel• Perfectly mated cutters are honed,

hardened to holdtheir edge• Blue plastic comfort grips

Rounded Nose#347, 7" $24.55 / Ea#348,8-1/2"$24.85/Ea

Wiremaster High Leverage Plier

#369, 9" $26.25 / Ea

Ironworkers Plier

#350S, 9" $27.45 / Ea

Cutting Pliers• Hand honed, perfectly mated cutters

scientifically heat treated to holdedge• Fine polished drop forged steel• Blue plastic comfort grips

Lap Joint Diagonal Plier#337, 7" $18.10 / Ea#338, 8" $19.80 / Ea

Box Joint Plier#435, 5" $21.10 / Ea#436, 6" $17.70 / Ea#437, 7" $19.55 / Ea

#447,7-3/4"$23.15/Ea

End Cutter#356, 6" $21.20 / Ea#357, 7" $20.95 / Ea#358, 8" $23.95 / Ea

Cable Cutter#911,9-1/2"$26.20/Ea

Cutting Nippers• Specially designed for easy cutting of

large nails, small spikes, for tie wires• Fine polished drop forged steel• Cutting edges hand filed• Blue plastic comfort grips

#148-10, 10" $28.45 / Ea#148-14, 14" $39.00 / Ea

Wiring Stripper Cutter• Multi-purpose wiring tools• Strips wire with no damage• Cuts wire with clean, scissors action• Blades are precision ground and

heat treated for long life• Crimps both insulated and non-

insulated wire connectors• Lean pliernose pulls, loops wire ends• Blue plastic comfort grips

#958, 6" (for small wire) $12.95 / Ea#908, 8-1/4" (for larger wire)$17.45 / Ea

Crimping and Cutting Tool• Crimps both insulated and non-

insulated connectors• Precision crimping dies and cutters

from 10 to 22 AWG• Slim nose shaped for tight spaces• Blue plastic comfort grips

#909, 9-3/4" $21.60 / Ea

Nut Driver Set• Full hollow shaft; 3" blade length; 7"

overall length• Set includes 3/16", 1/4", 5/16", 11/32",

3/8", 7/16" and 1/2" sizes• 7/16" and 1/2" have 3.25" blade length

and 7.25" overall length

#ND-7CB $36.20 / Ea

Nut Drivers• All have 3.25" blade length and 7.25"

overall length

3/16 ND $5.20 / Ea1/4 ND $5.20 / Ea5/16 ND $5.20 / Ea3/8 ND $5.20 / Ea7/16 ND $5.20 / Ea1/2 ND $5.20 / Ea

Adjustable Wrenches• Chromium plated drop forged steel• Heat treated for maximumtoughness

and hardness of working surfaces• Thin, strong, streamlined for maximum

usefulness and durability

#804, 4" cap 1/2" $15.25 / Ea#806, 6" cap 3/4" $16.25 / Ea#808, 8" cap 15/16" $17.90 / Ea#810, 10" cap 1-1/8" $21.75 / Ea#812, 12" cap 1-5/16" $31.25 / Ea#815, 15" cap 1-11/16" $57.15 / Ea

Tongue and Groove Pliers• Right angle teeth grip in all directions• Undercut tongue & groove, won't slip• Permalock fastener, eliminates nut

and bolt failure;blue plastic comfortgrips

Size Adjustment Capacity Price#424 4-1/2" 3 1/2" $13.90 / Ea#426 6-1/2" 5 7/8" $12.00 / Ea#420 9-1/2" 5 1-1/2" $14.50 / Ea#430 10" 7 2" $15.05 / Ea#440 12" 7 2-1/4" $17.10 / Ea#460 16" 8 4-1/4" $28.35 / Ea

Curved JawSize Adjustment Capacity Price

#422 9-1/2" 5 1-1/8" $14.70 / Ea#442 12" 7 2-1/4" $16.50 / Ea

NutbusterSize Adjustment Capacity Price

#410 9-1/2" 4 1-1/8" $16.55 / Ea#414 14" 6 2" $26.95 / Ea

GriplockSize Adjustment Capacity Price

GL-10 9-1/2" 5 1-1/4"$11.35 / EaGL-12 12" 6 2-1/4"$15.20 / Ea

Slip Joint Pliers• Fine polished drop forged steel• Permalock fasteners• Blue plastic comfort grips

Wire Cutting Shear

#526, 6" $9.75 / Ea#528, 8" $10.05 / Ea

HAND TOOLS


Straight Pattern Snips• Straight pattern snips are primarily

for straight cuts, although they will cutwide curves when trimming light stock

• The inside edge of the blade face isflat and tends to guide the tool alonga straight line

• Widely used in the plumbing,heating,air conditioning and roofing trades

• Cushion grip handles for comfort andbetter grip

#58039, 12-1/2" $24.90 / Ea

First Choice USA Tools

Aviation Snips• Compound leverage cuts with half of

the effort• Easily cuts sheet metal, wire screens,

floor tile, synthetic shingles, etc• Positive lock, contouredhandles• Compound leverage vinyl grip• Drop forged alloy steel blades

Left Cut Aviation $13.15 / Ea

Straight Cut Aviation $13.15 / Ea

Right Cut Aviation $13.15 / Ea

Combination Tinner Snips

7" Cushion Grip, 1-3/4" cut $13.65 / Ea10" Cushion Grip, 2-1/2" cut $16.10 / Ea12" Cushion Grip, 3" cut $20.50 / Ea

Crescent Black Finish AdjustableWrench• Polished head; regular handle; Non-

slip grip• Wide capacity jaw allows each tool to

work with more fastener sizes• Corrosion resistant black finish

#AT16V, 6" long $16.45 / Ea#AT18V, 8" long $17.10 / Ea#AT110V, 10" long $21.50 / Ea#AT112V, 12" long $33.20 / Ea

Crescent End Cutting Nippers• Width of blades, clearance in throat,

leverage ratio of handles to blades,size of rivet and angle of cutting edgeshave been carefullydesigned toproduce a top quality tool

#727CV, 7-1/4" long $23.05 / Ea

Crescent Tongue And Groove Pliers• Designed to grip all shapes like rods,

pipes and cable connections• Straight jaws and self-locking jaw

adjustment• Forged, hardened and tempered

#R210CV, 10" long $13.05 / Ea#R212CV, 12" long $15.20 / Ea

Wiss Snips

Wiss Compound Action Metal Snips• Non-slip serrated jaws made of extra

tough and wear-resistant specialmolybdenum steel to provide theextra service demanded by thecompound lever action and towithstand the severe strain of cuttingheavy stock or tight curves

• Handles are formed of specialhigh strength steel and have amargin of strength far above the limitof the hand power that can be exerted

#58012 $19.15 / EaM-1R Red grips, Cuts left

#58018 $19.15 / EaM-2R Green grips, Cuts right

#58021 $19.15 / EaM-3R Yellow grips, Cuts straight

Channellock Screwdrivers• Hardened chrome vanadium steel

Slotted HeadHex Blade Overall

Part # Dia. Length Length54 5/32" 4" 7.25" $3.15 / Ea56 5/32" 6" 9.625" $3.15 / Ea58 5/32" 8" 11.625" $3.15 / Ea74 7/32" 4" 8" $3.15 / Ea77 7/32" 7" 11" $3.15 / Ea106 5/16" 6" 10" $4.75 / Ea

Phillips HeadHex Blade Overall

Part # Dia. Length LengthP14 5/32" 4" 7.25" $3.15 / EaP24 7/32" 4" 8" $3.15 / Ea

Torx Screwdriver Set• Includes #10, 15, 20, 25, 27, and 30

#TX-6K $17.30 / Ea

Torx ScrewdriversTX-6 $3.15 / EaTX-7 $3.15 / EaTX-8 $3.15 / EaTX-9 $3.15 / EaTX-10 $3.15 / EaTX-15 $3.15 / EaTX-20 $3.15 / EaTX-25 $3.15 / EaTX-27 $3.15 / EaTX-30 $3.15 / Ea

Cooper Group

Crescent Tools

Crescent Midget Diagonal Plier• Square joint design• Designed for general purpose cutting• Made of forged alloy steel

#9426CV, 6" long $18.70 / Ea

Crescent Needle Nose Plier• Long needle nose with excellent

gripping ability• Designed for work in tight, narrow areas• Made of forged alloy tool steel

#7776CV, 6" long $17.70 / Ea

HAND TOOLS


Rulers and Tape Measures

Universal Folding Wood Rule• Ends are finished and

sealed• Spring joints and end

caps are brass plated• 460 graduates consecutive inches to

1/16ths on both edges and sides• 460 has regular markings; numbering

is on outside of rule

#460, 6 ft. long x 5/8" wide $12.80 / Ea

Yellow Case Steel Power Tapes• Steel blade has clear protective

coating• Triple riveted end hook with bottom

blade protector• Bright 3-color blade printing, with bold

large numbers, 16" and 19.2" studmarkings

• Slide-lock holds blade firmly• Built-in shock absorber to protect blade

tip

#4912, 5/8" x 12' $4.35 / Ea#4916, 3/4" x 16' $5.85 / Ea#4925, 1" x 25' $6.80 / Ea#4930, 1" x 30' $8.25 / Ea

10' x 5/8" Power Tape Measure• Durable chrome plated case• The first 12" of tape is

divided into 32ndgraduations

• Bold, clear letters on abright yellow tape

#610 $4.20 / Ea

25' x 1" Slide Lock Tape Measure• Easy operating thumb

lock blade control• Durable chrome plated

case• Bold, clear letters on a

bright yellow tape• Ultra rigid blade with a durable

acrylic coating• Accurate inside and outside

measurements• Includes stainless steel belt clip

#626 $7.05 / Ea

Open Reel Fiberglass Tape• Heavy duty construction• High impact resistant ABS body• Printed two sides, inch and 1/10th foot

scale• Fiberglass tape will not rot, corrode or

distort• Numbers and graduations are printed

in black on a white blade

#6611, 100' $13.95 / Ea#6622, 200' $24.10 / Ea#6633, 300' $33.85 / Ea

Self-Locking Tape Measure• Self-locking mechanism allows blade

to be extended easily• Push button allows blade to be retracted

smoothly• Can be used in either hand• Built-in rubber bumper• Ergonomically designed case• Avoids potential injury to fingers from

tape blade

#SL-2812, 5/8" x 12' $6.15 / Ea#SL-28116, 1" x 16' $8.45 / Ea#SL-2825, 1" x 25' $9.95 / Ea

Closed Case Steel Tape• Steel blade with acrylic protective

coating• High impact resistant ABS case• Folding rewind crank for fast reliable

retrieval• Fits comfortably in hand

#905, 50' $9.50 / Ea#901, 100' $12.95 / Ea

Ardell Utility Knives

Retractable knife w/5 blades $2.95 / Ea

Replacement blades (5/pk) $.90 / PkReplacement blades(100/pk)$11.80/Pk

Hook-Type Replacement blades (5/pk)$2.70 / Pk

Single Edge Razor Blades $4.50 / Pk(100/pk)

Warner Scrapers

Putty Knives• Handles are made of solvent resistant

polypropylene• Blades made of stainless steel

1-1/2" Flexible Putty Knife#182 $1.70/Ea1-1/2" Stiff Putty Knife#180 $1.90/Ea

3" Flexible Putty Scraper#183 $1.90/Ea3" Stiff Putty Scraper#181 $1.95/Ea

Safety Razor Scraper• Durable all steel construction• Strong welded body• Accepts most all single edge razor

blades• Use for removing gum, adhesive, caulk,

window labels and stickers

#105 $1.85 / Ea#103, with 5 blades $2.40 / Ea

HAND TOOLS


Jorgensen Clamps

Adjustable Jaw Length Handscrews• For gluing and assembly of woodwork,

furniture, cabinet work, etc.• Hard maple jaws do not mar the work

and are less likely to slip than steel jaws• They have deep throat and afford either

a broad area of evenly distributed pres-sure, or concentration at one point

• Angle between jaws adjustable to fitthe work-also jaws may be adjustedone to overlap the other

#3/0, 6" jaw length$16.70/Ea

Pony Steel Bar Clamp Fixtures• No holes, notches or rivets required to

assemble; just screw the head onregular pipe threads

• The foot has a multiple disc clutch whichgrips the bar automatically at any point

• Most rapid action, secure holding powerand easy release

#52, for 1/2" black pipe $12.45 / Ea#50, for 3/4" black pipe $16.25 / Ea

Pony Spring Clamps• Light, inexpensive tools of countless

uses on metal, wood, plastics, fabric-ready, willing "extra hands" for usewherever "spring pressure" isadequate, and especially where speedis essential

• At full nominal opening capacity thejaws do not go "beyond" parallel;handles do not tend to slip out of thehands

• All have protected handles and tips

#3201-HT, 1" max. opening $2.15 / Ea#3202-HT, 2" max. opening $3.35 / Ea

Jorgensen Steel Bar Clamps• A very light-weight, low-priced, instant-

acting bar clamp made to high-qualitystandards

• Multiple disc clutch permits instantadjustment-secure hold-easy to release

#3706, 6" max. opening $10.65 / Ea

Jorgensen Carriage Clamps• Most universally used class of "C"

clamp• Cold-drawn steel screws, of more than

adequate diameters, carefully fitted• Vise-type handles regularly furnished• Swivels are steel, patented "Jorgensen"

design-will stay on• "V"-notch in foot of frame will hold

rounded sections

Opening ThroatWidth Depth

#1410 1" 1" $1.75 / Ea#1415 1-1/2" 1-1/2" $3.00 / Ea#1420 2" 1" $2.40 / Ea#1422 2-1/2" 1-3/8" $4.20 / Ea#1430 3" 2" $5.05 / Ea#1440 4" 3" $7.40 / Ea#1450 5" 3-1/4" $9.45 / Ea#1460 6" 3-1/2" $10.50 / Ea#1480 8" 4" $15.95 / Ea

Great Neck Clamps

Ratcheting Bar Clamps

#59000, 6" $10.00 / Ea#59001, 12" $11.00 / Ea#59002, 18" $12.00 / Ea#59003, 24" $13.45 / Ea

Nylon Spring Clamps

#930, 1" $.95 / Ea#931, 2" $1.45 / Ea#932, 3" $1.80 / Ea

HAND TOOLS


Great Neck Tools

Professional Screwdrivers• Large tough super shock

and wear resistant hi-impactclear amber handles withdeeply black flutedembossed inlay handles

• Polished bladesmanufactured of chromevanadium steel withprecision ground tips

Flat Tip Screwdriver, Round Shank#G10C, 3" x 1/8" $1.85 / Ea#G22C, 1-1/2" x 1/4" $2.10 / Ea#G43C, 4" x 3/16" $2.35 / Ea#G44C, 4" x 1/4" $2.70 / Ea#G66C, 6" x 5/16" $2.60 / Ea#G88C, 8" x 3/8" $5.45 / Ea

Phillips Screwdriver, Round Shank#GR22C, 1-1/2" x 1/4" $2.10 / Ea#GR33C, 3" x 3/16" No.1 Pt $2.55 / Ea#GR44C, 4" x 1/4" No.2 Pt $2.60 / Ea#GR66C, 6" x 5/16" No.3 Pt $4.85 / Ea

Offset Screwdriver

#OS2C, Phillips and Standard $1.35/Ea

Combination Wrench Set• Constructed of drop forged steel alloy• 5 Pc. Set 3/8" thru 5/8"

#COW5C $7.30 / Set

Hacksaw Frames• Frames are adjustable to accomodate

blades from 10"-12" long, and can beadjusted to cut four different angles

• Handles are made of tough, colorfulplastic, exclusively designed forproper grip and better balance

• All frames are furnished with blades

#125, 3-3/4" Depth, 11/16" x 3/16" Stock,Solid steel handle with plastic grips

$11.25 / Ea

Mitre Back Saws• Spring steel back saw, natural

hardwood handle• 12 teeth per inch• Depth 3" under reinforced back

#MM14, 14" Mitre Back Saws$10.70 /Ea

Center Punches• From alloy tool steel-full hand-

polished face and head, scientificallyhardened and tempered

#236C, 5" x 3/8" x 3/16" $2.00 / Ea

Wire Wheels

#WC6, 6" x 1/2" bore coarse $5.60/Ea#CBC2, 2"x 1/4" shank coarse$2.75/Ea#CBC3, 3"x 1/4" shank coarse$3.20/Ea

Flaring Tool• Makes a single flare on tubing without

danger of crushing• Perfectly smooth flare fits all standard

high-pressure fittings• Takes sizes 3/16", 1/4", 5/16", 3/8", 1/2",

and 5/8"

#FT3C $7.60 / Ea

Rubber Mallet

#RM16, 16 oz. $3.00 / Ea

Nail Sets• Made of heat treated alloy steel

#NS1C, 1/32" $1.50 / Ea#NS2C, 2/32" $1.50 / Ea#NS3C, 3/32" $1.50 / Ea#NSK, 3-piece set $3.50 / Ea

Hex Key Wrench Sets#HK7A, 7 Pc Set $2.25 / Ea

7pc short arm key setincludes sizes:5/64", 3/32", 1/8", 5/32",3/16", 7/32", 1/4"

#HEK7C, 7 Pc Folding Set $3.20 / Ea

7pc folding set includessizes: .050", 1/16", 5/64",3/32", 1/8", 4/32", 3/16"

Bolt Cutters• Ruggedly built all-purpose forged steel• Ideal for cutting concrete reinforcing

rods, medium tensile and soft bolts;rods, rivets, bars, chains, cables, etc

• Versatile short cutting edge toaccommodate chain links

• Hold firm vinyl grips• Built to last

#BC12, 12" $11.85 / Ea#BC14, 14" $15.20 / Ea#BC18, 18" $19.05 / Ea#BC24, 24" $24.25 / Ea

Wood Chisels• High impact plastic handle• Drop forged blade• Precision ground blade

#9103C, 1/2" $9.65 / Ea#9105C, 3/4" $9.80 / Ea#9106C, 1" $10.25 / Ea#9107C, 1-1/4" $7.50 / Ea#9108C, 1-1/2" $8.25 / Ea

Cold Chisels• Drop forged steel• Polished blade

#504C, 3/8" $2.70 / Ea#505C, 1/2" $3.10 / Ea#511C, 5/8" $4.10 / Ea#518C, 3/4" $5.80 / Ea#527C, 7/8" $6.10 / Ea

HAND TOOLS


Empire Tools

Combination Squares• Sturdy body and brass hardware• Self-locking, spring-loaded blade

assures firm, accurate settings• Steel blades are treated to resist rust

and are permanently impressed in8ths and 16ths on one side, and16ths and 32nds on the other

• Steel scriber is securely fixed withholding collet

12" Poly-Steel Combination Square• Self-aligning drawbolt• Durable Polycast head• Full view acrylic vial• Use for making accurate 90° and 45°

markings, measuring and checking

#220 $5.10 / Ea

Professional Combination Square• Machined head• Full view vial• Self-aligning steel drawbolt• Use for making accurate 90° and 45°

markings, measuring and checkingdepth

#255, 6" steel head $9.65 / Ea#240, 12" steel head $7.35 / Ea#280, 16" steel head $13.90 / Ea

Polycast Rafter Square• Lightweight Polycast rafter square• Reference tables molded into square• Thick and durable construction• Use as a saw guide

#296 $2.75 / Ea

12" Polysquare Rafter Square• Extra large size make marking and

cutting wider boards easy• Tough, durable Polycast material

stands up to rugged everyday use• Easy to see graduations repeated on

both sides• Molded-in conversion tables

#396 $9.20 / Ea

Magnum Aluminum Rafter Square• Solid, one-piece extrusion outperforms

brittle die casts• Won't bend or break• Aluminum construction will not rust• Finer marked graduations and numbers

for more precise measuring• Thicker edge makes for a safer saw

guide• Use for marking and cutting 90° and

45° angles

#2990 $6.55 / Ea

Drywall T-Square• Strong, solid, with a securely riveted

head• Allows accurate cuts and markings• Durable yellow finish es easy to see on

job site and the large bold numbers andgraduations make for easy reading

• 48" length

#410-48 $11.35 / Ea

8 x 12 Utility Square• Face graduated in 8ths and 12ths• Back graduated in 8ths and 16ths

#100 $3.65 / Ea

16 x 24 Frame Square• Features rafter tables, brace table,

essex table, octagon & 100th scales• Face graduations 8ths and 16ths• Back graduations 10ths, 12ths, 16ths

#1110 $7.35 / Ea

9" Sliding T Bevel• Durable Polycast handle• Low profile locking nut allows for left or

right hand use• Adjustable 8" steel blade

#130 $7.10 / Ea

Aluminum Yard Stick• Sturdy, lightweight aluminum with

thermo-bond embossed graduations

#403, 1" x 36" $2.50 / Ea

Aluminum Straight Edge• Sturdy .125" extruded aluminum• Features non-glare satin finish with

thermo-bond embossed graduations• 2" wide

#4004, 48" $7.35 /Ea#4006, 72" $12.35 /Ea

Polycast Levels• Replaces any wood or aluminum

level• Will not mar or scratch fine surfaces• Durable Polycast frame• Non-conductive

#330-24, 24" $6.90 / Ea#330-48, 48" $10.50 / Ea

Unitek Aluminum Levels• Solid I-Beam frame• Replaceable acrylic vials• Top reading windows• Accurate advanced frame design

#580-24, 24" $13.55 / Ea#580-48, 48" $26.20 / Ea#580-72, 72" $47.65 / Ea

Magnetic Unitek Aluminum Levels• Magnetic edge for ferrous surfaces• Top reading window• Acrylic vials are replaceable• Accurate advanced frame design

#581-48, 48" $29.70 / Ea

HAND TOOLS


Magnetic Tradesman Aluminum Level• Strong holding magnetic edge frees

hands• Durable blue anodized aluminum I-

beam frame w/top read window• Shock absorbing end plates

#581-24, 24" $16.60 / Ea

3" Line Level• Features shake-proof line clips• Easily readable from all sides

#83-3 $1.50 / Ea

Line Level Set• Contains standard line level and

Vari-Pitch line level• Use for landscaping, plumbing,

suspending ceilings and gutters

#83038 $2.40 / Ea

Pocket Level• This level is made of hi-impact

styrene and is perfect for levelingappliances, shelving, pictures, etc.

#84-5 $2.55 / Ea

9" Polycast Torpedo Level• Strong, accurate 9" Polycast frame• Non-conductive frame insulates from

heat and cold• Vials read plumb, level and 45°

#33-9 $3.35 / Ea

9" Magnetic Polycast Torpedo Level• Durable, lightweight, non-conductive• Magnetic base for ferrous surfaces• Vials read plumb, level and 45°

#331-9 $3.95 / Ea

9" Magnetic Aluminum Torpedo• V-groove working edge fits on pipe• Magnetic base frees hands• Top read window

#581-9 $6.35 / Ea

Polycast Post Level• Sturdy, high-impact construction• Durable vials read plumb and level• Stretchable strap allows level to fit on

round or square surfaces• Establish plumb or level on decks,

fences, support poles

#720 $4.40 / Ea

Flagging Tape#77-001, 200' Glo-Lime $1.90 / Roll#77-002, 200' Glo-Orange $1.90 / Roll#77-003, 200' Glo-Pink $1.90 / Roll

#77-062, 600' Glo-Orange $4.05 / Roll#77-063, 600' Glo-Pink $4.05 / Roll#77-064, 600' Glo-Yellow $4.05 / Roll

Caution Tape

#77-1001, 1000' $10.35 / Roll

HAND TOOLS


Irwin

Metal Case Chalk ReelHeavy-duty case is constructed of durablealuminum alloy. Steel plated hook andlarge grip ancor ring provide betterholding power. Retractable self-lockingmetal handle allows reel to be used as aplumb bob. Twisted cotton line holdsmore chalk for multiple line strikes. Holdsapproximately 2 oz. of chalk.

#64110, 100 ft. $5.80 / Ea

Fast Retrieve Chalk ReelRetrieves chalk lin 3-1/2 times faster thana standard chalk reel. Crank handleclutch release allows release of the linewithout spinning the crank handle.Lightweight ABS impact-resistant caseincreases durability. Patented hookstorage and door locking mechanismvirtually eliminate spills and line tangles.Twisted cotton line holds more chalk formultiple line strikes. Holds approximately2 oz. of chalk.

#64310, 100 ft. $8.90 / Ea

Carpenter's PencilIndustrial grade carpenter pencil withmedium lead. Ideal forconstruction andlayout work. 7" length.

#66300 $.50 / Ea

Lumber CrayonsFor use on oily, slick, wet, cold, or drysurfaces. Ideal for lumber, concrete,ceramics, and metal. Non-toxic,waterproof.

Please specify color when ordering.#66401, Red $.80 / Ea#66402, Blue $.80 / Ea#66406, Yellow $.80 / Ea

T50 Ceil Tile Staples#T50CT, 5000/pack $14.15 / Pkg

Heavy-Duty Plier-Type Stapler• Ideal for hundreds of uses• Reaches in hard-to-get-at places• All steel with chrome finish• Jam-proof mechanism

#P22 $20.20 / Ea

P22 Staples1/4", 5050/pk $2.20 / Pk5/16", 5050/pk $2.45 / Pk

Handsaws

26" Professional Handsaw• Quality, high carbon steel blade for

durability• Precision set teeth for straight cuts• Bevel-sharpened teeth for fast, smooth

cuts

#65955, 8 pt crosscut $19.75 / Ea#65956, 10 pt fine crosscut $19.75 / Ea

15" General Purpose Saw• Cuts with both front and back cutting

edges• For rough, fine and standard finish cuts

#NSP5 $20.35 / Ea

Marking ChalkHigh visibility chalk for self chalking linereels. For use on a variety of surfacesincluding wood, drywall, concrete, stone,and metal.

#64901, Blue $1.10 / 8 oz.#64902, Red $1.10 / 8 oz.#64905, Fluorescent Orange$1.75 / 8 oz.#64907, Fluorescent Green$1.75 / 8 oz.

#65101, Blue $6.30 / 5##65102, Red $6.30 / 5##65104, White $6.30 / 5##65103, Yellow $6.30 / 5##65105, Fluorescent Orange$11.95 / 5#

Arrow Fasteners

Heavy-Duty Hammer Tacker• All steel construction with chrome

finish• Lightweight with balanced design• Impact resistant handle; non-slip grip

#HT50P $52.20 / Ea

Heavy-Duty Staple Gun Tacker• All steel construction with chrome

finish• Jam-proof mechanism• Used by contractors and do-it-

yourselfers for almost any job

#T50 $33.50 / Ea

T50 Staples1/4", 5000/pk $10.05/Pk5/16", 5000/pk$10.35/Pk3/8", 5000/pk $12.15/Pk1/2", 5000/pk $12.60/Pk9/16", 5000/pk$13.60/Pk

HAND TOOLS


Circular Saw Blades

7-1/4" Blade-Left Riptide Blades#12801 $10.95 / Ea18-tooth, 5/8" arbor

#12811 $11.50 / Ea24-tooth, 5/8" arbor

#12821 $22.95 / Ea40-tooth, 5/8" arbor

#12831 $48.65 / Eametal cutting, 5/8" arbor

7-1/4" Blade-Right Riptide Blades#12800 $10.95 / Ea18-tooth, 5/8" arbor

#12810 $11.45 / Ea24-tooth, 5/8" arbor

#12820 $22.95 / Ea40-tooth, 5/8" arbor


6" Blade-Left Riptide Blade#12850 $11.25 / Ea18-tooth, 1/2" arbor

#12855 $23.90 / Ea40-tooth, 1/2" arbor


4-1/2" Blade-Right Riptide Blade#12870 $21.15 / Ea20-tooth, 3/8" arbor

14" Cut-Off Wheels#14002 $7.55 / EaGeneral purpose, alumoxide, 3/32" thick, 1" arbor hole

Saw Blades

Benchtop Saw Blades

10" Riptide Slide Compound Blades#12900 $39.50 / Ea40T, ATB, 5° Hook Angle, 5/8"arbor

#12901 $46.85 / Ea60T, TG, 5° Hook Angle, 5/8"arbor

#12902 $55.10 / Ea80T, ATB, 5° Hook Angle, 5/8"arbor

10" Riptide Table Saw Blades#12910 $34.90 / Ea24T, ATB, 22° Hook Angle,5/8" arbor

#12911 $39.50 / Ea40T, ATB, 13° Hook Angle,5/8" arbor

#12912 $46.85 / Ea60T, ATB, 10° Hook Angle,5/8" arbor

10" Riptide Miter Saw Blades#12920 $63.35 / Ea40T, ATB, 5° Hook Angle, 1"arbor

#12921 $69.80 / Ea60T, TG, 0° Hook Angle, 1"arbor

#12922 $76.20 / Ea80T, ATB, 0° Hook Angle, 1"arbor

Irwin Drill Bits

High Speed Steel Drill Bits3/64" High Speed Drill Bit $.75 / Ea1/16" High Speed Drill Bit $.75 / Ea5/64" High Speed Drill Bit $.75 / Ea3/32" High Speed Drill Bit $.90 / Ea7/64" High Speed Drill Bit $.90 / Ea1/8" High Speed Drill Bit $.90 / Ea9/64" High Speed Drill Bit $1.00 / Ea5/32" High Speed Drill Bit $1.00 / Ea11/64" High Speed Drill Bit $1.15 / Ea3/16" High Speed Drill Bit $1.30 / Ea13/64" High Speed Drill Bit $1.50 / Ea7/32" High Speed Drill Bit $1.60 / Ea15/64" High Speed Drill Bit $1.70 / Ea1/4" High Speed Drill Bit $1.90 / Ea17/64" High Speed Drill Bit $2.25 / Ea9/32" High Speed Drill Bit $2.65 / Ea19/64" High Speed Drill Bit $2.85 / Ea5/16" High Speed Drill Bit $2.90 / Ea21/64" High Speed Drill Bit $3.20 / Ea11/32" High Speed Drill Bit $3.60 / Ea23/64" High Speed Drill Bit $4.05 / Ea3/8" High Speed Drill Bit $4.10 / Ea

Cobalt Jobbers Length Drill Bits• Designed for drilling stainless steel and

other hard abrasive materials• Easily withstands high drilling heat• 135° split point starts cutting

immediately upon contact-no centerpunch required

• Ideal for machine shops

1/16" Cobalt Drill $.95 / Ea3/32" Cobalt Drill $.95 / Ea7/64" Cobalt Drill $1.00 / Ea1/8" Cobalt Drill $1.15 / Ea5/32" Cobalt Drill $1.35 / Ea3/16" Cobalt Drill $1.50 / Ea7/32" Cobalt Drill $2.05 / Ea1/4" Cobalt Drill $2.55 / Ea5/16" Cobalt Drill $3.60 / Ea3/8" Cobalt Drill $5.40 / Ea1/2" Cobalt Drill $8.45 / Ea

HAND TOOLS


Steel Circular Saw Blades• Precision ground teeth for smooth,

accurate cuts• Fully hardened plate runs truer longer• Heavy gauge high carbon steel for

extended life

Diam.Part # Dia. Teeth Arbor Kerf11140 7-1/4 40 5/8" .078" $6.05 / Ea11240 7-1/4 60 5/8" .078" $7.25 / Ea21840 7-1/4 140 5/8" .078" $6.10 / Ea11440 7-1/4 150 5/8" .059" $9.70 / Ea

Classic Series Circular Saw Blades• Best value for an economy blade• Corrosion resistant coating helps

prevent rusting• Precision ground teeth for smooth,

accurate cuts• All blades have 5/8" arbor and 2.2 mm

kerf

HookPart # Dia. Teeth Angle15150 7-1/4 24 16 $11.10 / Ea25130 7-1/4 24 19 $6.15 / Ea15230 7-1/4 40 20 $10.25 / Ea15270 10 40 16 $20.45 / Ea

Marathon Miter/Table Saw Blades• 400 grit diamond ground teeth for a

smooth finish• Precision tensioned and balanced

blade for an accurate cut• Construction grade carbide teeth for

longer life• Thin kerf for fast cuts

Part # Dia. Teeth Arbor Kerf14070 10 40 5/8" .095"$30.60 / Ea14084 12 100 1" .095"$77.90 / Ea

Marathon Portable Corded Circular SawBlades• Every other tooth is thinner for faster

cuts• New heat vent/expansion slot design

reduces vibration for longer life andstraighter cuts

• Construction grade carbide teeth forlonger life

• Reinforced shoulder for addeddurability

• Fully hardened plate runs truer, longer• All have 5/8" diamond arbot and 20

degree hook angle

Part # Dia. Teeth Kerf24030 7-1/4 24 .071" $12.60 / Ea

Saw Blades

Lenox Reciprocating Saw Blades• For smooth cutting wood, nails, metal,

cast iron and ceramics• Makes contour cutting easy• Bi-metal and high carbon steel blade

for long and rugged use• Fits all reciprocating saws

6" x 6 tpi $4.00 / Ea6" x 10 tpi $3.45 / Ea6" x 14 tpi $3.45 / Ea6" x 18 tpi $3.45 / Ea6" x 24 tpi $3.45 / Ea

8" x 10 tpi $4.35 / Ea8" x 18 tpi $4.35 / Ea

12" x 6 tpi $6.25 / Ea

Lenox Jig Saw Blades• Available in bi-metal and high-speed

steel• Broad selection of sizes and shapes for

cutting any material that can be saw cut• Use more tpi for thin work, use less tpi

for thicker work• At least two teeth should be in contact

with the work material• 2 per package

3" x 14 tpi $3.55 / Pkg3" x 18 tpi $3.55 / Pkg3" x 24 tpi $3.55 / Pkg

4" x 6 tpi $4.15 / Pkg4" x 10 tpi $4.15 / Pkg

4-1/2" x 6 tpi $3.90 / Pkg4-1/2" x 10 tpi $4.75 / Pkg

HAND TOOLS


Brushes

Vortec Small Angle Grinder BrushesSmall angle grinder brushing applica-tions include roughening,deburring, rustand paint removal, weld scale and spatterremoval, and surface preparation beforepainting and welding. All have 5/8-11arbor size.

#36030, 3" crimped cup brush-coarse$10.30 / Ea

#36038, 2-3/4" knot cup brush-extracoarse $15.80 / Ea

#36012, 4" wheel brush/twist-coarse$17.15 / Ea

#36053, M10 x 1.50 Adapter $4.10 / Ea

Vortec Large Angle Grinder BrushesHeavy-duty roughening, deburring,weld scale and corrosion removal, surfacepreparation before painting or welding.All have 5/8-11 arbor size.

#36036, 4" crimped cup brush-coarse$20.20 / Ea

#36018, 4" knot cup brush-extra coarse$14.20 / Ea

Vortec Bench Grinder BrushesPopular applications include heavy-duty burr and flash removal, cleaning,edge blending and surface conditioning.All have 5/8" to 1/2" arbor size.

#36000, 6" narrow $15.45 / Ea

Nicholson Files

#14224, 6" Slim Taper File $4.50 / Ea

#21825, 6" Mill Bastard File $5.25 / Ea#21832, 8" Mill Bastard File $6.25 / Ea#21839, 10" Mill Bastard File $7.95 / Ea#21842, 12" Mill Bastard File$13.05 / Ea

#21846, 6" Round Bastard File$6.10 / Ea#21853, 8" Round Bastard File$6.95 / Ea

#21867, 6" Flat Bastard File $7.30 / Ea#21862, 8" Flat Bastard File $9.30 / Ea#21868, 10" Flat Bastard File$11.15 / Ea

#19427, 10" Half Round Wood Rasp$17.60 / Ea

Nicholson Chain Saw File

#01590, 1/8" $3.90 / Ea#01630, 5/32" $3.90 / Ea#01765, 3/16" $3.90 / Ea#01888, 7/32" $3.90 / Ea

Nicholson 4-in-Hand File• This versatile tool is really four files in

one-with a file section and a raspsectionon the flat side and a file sectionand a rasp section on the half roundside

#21113, 8" long $10.50 / Ea#18962, 10" long $14.10 / Ea

Vortec Shank Mounted BrushesPower drill brushing applicationsinclude die, mold and tool cleaning, rustand paint removal, pipe cleaning, spotfacing. 1/4" shank size.

#36029, 2" cup brush-coarse$9.05 / Ea

#36011, 3" crimped wire cup brush-coarse$8.25 / Ea

#36031, 3" coarse wheel brush-coarse$14.80 / Ea

Nicholson Hacksaw Blades

Nicholson Bi-Metaloy Hacksaw Blades• Lasts twice as long as high speed steel

& up to ten times longer than carbon• With exceptional combination of tooth

hardness and shock resistance theseblades can operate 20% to 50% fasterresulting in lower costs per cut

#62723, 12" long x 18T/inch $1.90 / Ea#62749, 12" long x 24T/inch $1.90 / Ea

Nicholson Hacksaw Blade• Specially hardened

to induce toughness• Because of this extreme

toughness, one toothcoarseness greater than thatnormally recommended can be used

• Thus the cutting speed on thin stockscan be increased

NOTE: Not recommended for higher car-bon or alloyed steels

#63103, 10" long x 18T/inch $.70 / Ea#63112, 10" long x 24T/inch $.70 / Ea

#63145, 12" long x 18T/inch $.80 / Ea#63158, 12" long x 24T/inch $.80 / Ea#63171, 12" long x 32T/inch $.80 / Ea

Allway Brand Carbide Grit Blades10" Rodsaw blade $3.50 / Ea

HAND TOOLS


Marshalltown Tools

These tools are the Nu-Pride Tools. Thisline consists of less expensive tools, idealfor homeowner use.

Bricklaying Tools

Philadelphia Pattern Brick Trowels• Better suited for laying block because

they allow more mortar to be placed onthe blade

#16196, 10 x 5" $7.05 / Ea

London Pattern Brick Trowels• Designed for laying brick• Rounded heel shapes the blade so that

the mortar is carried a little furtherforward on the blade

#16126, 10 x 4-3/4" $7.05 / Ea

Plastic Brick Trowel• Hard temper steel blade

#16237, 9-1/2 x 4-1/2" $2.25 / Ea

Tuck Pointers• Made from hardened and tempered

steel• Integral finger guard protects against

calluses, heat, and cold

#16198, 6 x 3/8" $3.00 / Ea#16129, 6 x 1/4" $3.95 / Ea#16130, 6 x 1/2" $3.95 / Ea

Pointing Trowels

#16195, 5-1/2 x 2-3/4" $3.80 / Ea#16125, 7 x 3" $4.30 / Ea

Margin Trowels

#16197, 5 x 2" $3.80 / Ea

Wood Line Blocks• Shaped from poplar hardwood• Shrink-wrapped in pairs

#16506, 3-3/4" $2.35 / Ea

Concrete Finishing Tools

Concrete Edger• Has a steel blade, steel mounting, and

mortised wood handle• Both ends are slightly curved for

working ease• Used to produce a radius at the edge of

a concrete slab to help prevent the endfrom chipping off

#16492, 6 x 2-3/4" $3.80 / Ea

Steel Groover• Steel blade, steel mounting, and a

mortised wood handle• Both front and back edges of bit are

slightly curved for a clean cut• Cuts a 1/2" groove

#16491, 6 x 2-3/4" $3.95 / Ea

Magnesium Float• Extruded from very hard, durable,

lightweight magnesium• Provide smoother finish than wood• DuraSoft handle

#14610, 16 x 3-1/8" $29.10 / Ea

Lightweight Hand Float

#13822, 15 x 3-1/8" $20.10 / Ea

Wood Float• Used for leveling and smoothing

concrete prior to final finish

#14514, 14 x 3-1/2" $3.45 / Ea

Drywall Tools

Taping Knives• Tempered steel or stainless steel blade

with aluminum backing plate

Stainless Steel

#14321, 8 x 3 $13.50 / Ea#14323, 10 x 3 $14.40 / Ea#14325, 12 x 3 $15.25 / Ea

Blue Steel

#16136, 6 x 3 $5.75 / Ea#16137, 8 x 3 $6.35 / Ea#16143, 10 x 3 $6.70 / Ea#16144, 12 x 3 $7.20 / Ea

HAND TOOLS


Inside Drywall Corner Trowel• Formed from one piece of flexible

stainless steel• Used to embed tape and smooth out

the final layer of mud to taped corners

#16111, 3-1/2 x 4-1/2 $10.10 / Ea

Stainless Steel Mud Pans• Tapered ends and sides• All sides are sheared to clean knives

easily

#16390, 12" $15.60 / Ea

Plastic Mud Pan• Tapered ends and sides; metal

scraping bar• Resists chemicals and temperature

changes• Used for carrying joint compound

#16114, 12" $4.75 / Ea

Hand Sander• Molded plastic; lightweight tool• For use with die-cut or a half sheet of

standard sandpaper

#16158, 9 x 3-1/4" $6.40 / Ea

Swivel Pole Sander• Used for sanding drywall joints• Made of reinforced die-cast aluminum

bonded to a foam rubber pad

#14426, 9-3/8 x 3-1/4" $17.00 / Ea

Pole Sander Handle• Hardwood; hammerhead tip

#14827, 4' $8.40 / Ea

Quik-Mix Mixer• Ideal for stirring and blending paint,

drywall mud, and acoustic quickly andlump free

• Blade measures 8-1/2 x 4-1/2"

#16389, 28" $18.10 / Ea

Rubber Floats• 5/8" thick red rubber pad specially

bonded to the aluminum backing platefor long wear

• For use for rough and/or texturedfinishes

#14404, 9 x 4, Fine $9.70 / Ea#14406, 9 x 4, Coarse $6.70 / Ea

Drywall Saw• Hardened and tempered blade; 5 tpi

#16128, 15" $7.40 / Ea

Utility Saw• Intended for drywall; will cut almost any

non-metallic material• Blade cuts in both directions

#16426, 6" blade $10.15 / Ea

Drywall Rasp• No-load slot prevents clogging• Efficient design to smooth rough-cut

drywall edges

#14381, 7-1/2" $7.00 / Ea

Drywall Circle Cutter• Hardened cutter wheel and center pin

will remain sharp indefinately• Cuts sharp clean circles of up to 16" in

diameter with only one hand• Measure accurately on the calibrated

steel shaft

#14556, 8-1/2" $8.10 / Ea

Professional Drywall T-Square• Anodized aluminum finish• Large, bold numbers and graduations• Patented rivet design; permanently

fixed joint of blade and head• Specifically designed for the drywall

professional

#413-48 $14.60 / Ea

Hawk• Structural foam• Holds drywall mud and cement• For trowel or tape knife use

#HWK $7.75 / Ea

Wallboard Saws• 6" saw blade; hardwood handle

#WL6C $3.25 / Ea

HAND TOOLS


180 Series Putty Knives• Rugged, hard-working line for light-

duty construction or home projects• Economical tools feature blades of

spring stainless steel for easyspreading and easy cleanup

• Handles are polypropylene to resistpaint thinners and adhesive solventsduring cleanup

#184, 4-1/2" Broad Knife,Stainless Steel, Flex

$2.45 / Ea

#186, 6" Broad Knife,Stainless Steel, Flex

$2.95 / Ea

McGuire-Nicholas Workwear

Economy Foam Rubber Knee Pad• Contoured foam rubber• One 3/4" wide adjustable web strap• Overall size: 6.75 x 10 x 2.5

#317 $10.40 / Pr

Polyshield Knee Pads• Fully stitched cap keeps out debris• High density foam for maximum comfort• Two 1-1/2" velcro straps• Overall size: 7.75 x 12 x 4

#343 $12.00 / Pr

Non-Marring Knee Pads• Won't mar, scratch or scuff floors• Slip resistant ridges on cap• Two 1-1/2" adjustable velcro straps• Overall size: 7.75 x 12 x 4

#353 $15.20 / Pr

Suspenders• Redistributes weight of tools• Heavy-duty 2" wide suspenders• Fully adjustable front straps• One size fits all

#110C, Red $8.25 / Ea

2" Web Belts• Adjustable to fit waists up to 46"

#506 $5.50 / EaPolyweb, 2.5 x 11.5 x 1

1-3/4" Wide Leather Belt• Heavy-duty, rust resistant plated buckle• Cuts off to fit waists from 29"-46"• Overall size: 2.5 x 12 x 2

#416X $11.60 / Ea

45 Degree Large Cordless Drill Holster• Fits medium to large size cordless drills• Large opening for quick left handed

access• Center balance design; 2-1/2" belt slots• Overall size: 7.5 x 13.5 x 3

#1720R $10.55 / Ea

Hammer Holder• Rust resistant, plated steel loop• 2-3/4" belt slots• Overall size: 4.25 x 6.5 x 2

#439 $3.20 / Ea

2-Pocket Canvas Waist Apron• 2 large flared pockets; waist ties• Reinforced at stress points• Overall size: 17.75 x 8.75

#C17 $2.15 / Ea

5-Pocket Canvas Waist Apron• 2 large flared pockets; 3 small pockets• 2 webbed hammer loops; waist ties• Overall size: 20.5 x 9

#C14 $5.50 / Ea

5-Pocket Nail & Tool Bag• Large main compartment• Front nail pocket• 3 small tool pockets• Left leather hammer holder• Overall size: 10.5 x 13 x 2

#423RSP $16.70 / Ea

HAND TOOLS


Quality Import Tools

Diagonal Cutting Pliers• Heavier design for all-

purpose use• Tapered nose and

standard bevelcutting edges

• Drop forged chromealloy steel

• Precision ground andhardened with insulated cushion grips

4-1/2" Diagonal Cutting $4.85 / Ea6-1/2" Diagonal Cutting $5.45 / Ea7" Heavy Duty Diagonal $6.80 / Ea

Long Nose Pliers• High-leverage

design with groundcutting edges atjoint

• Permits wrapping,looping and cuttingwith a single plier

• Drop forged chrome alloy steel• Precision ground and hardened with

insulated cushion grips

5" Long Nose $4.05 / Ea6 1/2" Long Nose $5.15 / Ea8" Long Nose $6.55 / Ea

Linesman Pliers• High-leverage

design for easiercutting

• Provides greatermechanical cuttingand grippingadvantage than otherpliers of this type

• Coarsely knurled jaws• Drop forged chrome alloy steel• Precision ground and hardened with

insulated cushion grips

7" Linesman $6.95 / Ea8" Linesman $9.45 / Ea

Slip Joint Pliers• Slip joint action for

a wide range ofuses with two jawpositions

• Knurled jaws andinsulated cushion grips

• Drop forged chrome alloy steel

6" Slip Joint $4.45 / Ea8" Slip Joint $7.05 / Ea10” Slip Joint $7.25 / Ea

End Cutting Nippers• High leverage end

nippers for cuttingwire or nails close tothe work

• Wide throatclearance and jawsat just the right anglefor cutting

6" End Cutting Nipper $10.35 / Ea

Bent Nose Pliers• High leverage

design• Bent nose allows

grip in difficult toreach spots

• Drop forged chromealloy steel

• Precision ground and hardened withinsulated cushion grips

6" Bent Nose $4.55 / Ea

Drill Sets• High speed steel ground from solid

stock• Jobber length drill sets• Stored in metal index

#13 $12.25 / Set13 Drills-1/16" to 1/4" by64th

#29 $29.50 / Set29 Drills-1/16" to 1/2" by64th

#26 $61.50 / Set26 Drills- A-Z Letter Size

#60 $52.00 / Set60 Drills-#1 to #60 wiregauge

#115: 3 pc. Combination Set$93.65 / Set

(contains #29RH, #60RH, #26AZ)

Student Micrometers• Graduated in .001", accuracy to .005"• Hardened and ground measure face• Forged frames have durable baked

enamel finish• Bronze lead nut is adjustable for wear• Spindle lock and ratchet stop for

repetive measurements• Easy one step zero adjustment

0-1" $21.50 / Ea1-2" $33.25 / Ea2-3" $42.75 / Ea

Adjustable Wrenches• Chrome plated; drop forged from

alloy steel, hardened and temperedfor great strength and long wear

• Wrench openings are precisionmachined smooth and accurate

• Handle is correct length for maximumsafe leverage and proper balance

4" Adjustable Wrench $4.45 / Ea6" Adjustable Wrench $4.50 / Ea8" Adjustable Wrench $5.40 / Ea10" Adjustable Wrench $7.10 / Ea12" Adjustable Wrench $10.05 / Ea15" Adjustable Wrench $22.40 / Ea18" Adjustable Wrench $23.25 / Ea24" Adjustable Wrench $28.90 / Ea

Pipe Wrenches• I-beam handle for comfortable grip

with durable enamel finish• Full-floating hook drop-forged jaws• Tough, heat-treated, high alloy• Rugged knurl, easy-spin

adjustment nut

8" Pipe Wrench $6.25 / Ea10" Pipe Wrench $8.05 / Ea14" Pipe Wrench $11.45 / Ea18" Pipe Wrench $16.65 / Ea24" Pipe Wrench $28.75 / Ea

Combination Wrenches• Madeof quality drop forged alloy steel• Openings are smooth and accurately

broached• Correct fit to prevent slipping and right

thickness for tight quarters

1/4" Combination Wrench $2.85 / Ea5/16" Combination Wrench $2.80 / Ea3/8" Combination Wrench $2.85 / Ea7/16" Combination Wrench $3.15 / Ea1/2" Combination Wrench $3.45 / Ea9/16" Combination Wrench $3.65 / Ea5/8" Combination Wrench $4.45 / Ea11/16" Combination Wrench $4.75 / Ea3/4" Combination Wrench $5.15 / Ea

HAND TOOLS


C Clamp• Made of heavy malleable iron• Reinforced Corners for extra strength• Clamp has heavy duty

steel screw, sliding T-handle and smoothanvil for no-mar work

3" opening x 2" deep $4.70 / Ea4" opening x 2" deep $5.15 / Ea5" opening x 3" deep $8.40 / Ea6" opening x 3-1/2" deep $9.45 / Ea

For smaller or larger C-clamps, pleasesee page 48.

Calipers and Dividers• Hardened and tempered• Spring loaded

4" Outside Caliper $3.95 / Ea6" Outside Caliper $5.05 / Ea8" Outside Caliper $6.60 / Ea

4" Inside Caliper $3.95 / Ea6" Inside Caliper $5.05 / Ea8" Inside Caliper $6.60 / Ea

4" Divider $3.90 / Ea6" Divider $5.05 / Ea8" Divider $6.60 / Ea

Soldering Irons• U.L. listed 110 volt for auto, hobby

and electronic work

30 Watt, Pen-Type $8.10 / Ea35 Watt, Pistol Grip $12.95 / Ea85 Watt, Electric-pistol grip $23.25 / Ea

Tool Sets6 pc. Jeweler’s Screw Driver Set

$4.15 / Set

10 pc. Deluxe Screw Driver Set$24.00 / Set

5 pc. Woodburning Pen Set$20.75 / Set

Files

12 pc. Needle File Set-5-1/2" long$10.50 / Set

8" Flat Bastard $2.70 / Ea10" Flat Bastard $3.50 / Ea

6" Mill Bastard $1.85 / Ea8" Mill Bastard $2.15 / Ea10" Mill Bastard $2.85 / Ea12" Mill Bastard $4.35 / Ea

6" Round Bastard $1.95 / Ea8" Round Bastard $2.35 / Ea10" Round Bastard $2.95 / Ea

4" Slim Tapered File $1.40 / Ea6" Slim Tapered File $1.65 / Ea8" Slim Tapered File $2.50 / Ea

File Card $4.20 / Ea

File card with cleaning brush $7.85 / Ea

Chisels3/8" Wood Chisel $9.65 / Ea1/2" Wood Chisel $9.65 / Ea5/8" Wood Chisel $9.80 / Ea3/4" Wood Chisel $9.80 / Ea1" Wood Chisel $10.25 / Ea

3/8" x 5" Cold Chisel $2.70/Ea1/2" x 6" Cold Chisel $3.10/Ea5/8" x 6" Cold Chisel $4.10/Ea3/4" x 7" Cold Chisel $5.80/Ea7/8" x 8" Cold Chisel $6.10/Ea

1/8" to 1 1/8" Tubing Cutter $6.30 / Ea

6’ Wooden Folding Ruler-Brass Extent$6.10 / Ea

Hammers

8 oz. Economy Curved Claw $6.45/Ea16 oz. Economy Curved Claw $7.20/Ea16 oz. Deluxe Curved Claw $9.75/Ea16 oz. Ripping Claw Hammer $7.70/Ea16 oz. Fiberglass Claw $11.65/Ea24 oz. Framing Hammer $14.95/Ea

Ball Pein Hammers

8 oz. Ball Pein $6.70 / Ea12 oz. Ball Pein $7.65 / Ea16 oz. Ball Pein $9.45 / Ea24 oz. Ball Pein $10.40 / Ea32 oz. Ball Pein $12.35 / Ea

16 oz. Fiberglass Ball Pein $17.15 / Ea

Double Faced Hammers

2# Double Faced Engineer’s $10.35/Ea3# Double Faced Engineer’s $18.50/Ea4# Double Faced Engineer’s $14.15/Ea

6# Double Faced Sledge $25.70 / Ea8# Double Faced Sledge $29.10 / Ea10# Double Faced Sledge $32.80 / Ea12# Double Faced Sledge $37.95 / Ea16# Double Faced Sledge $57.35 / Ea20# Double Faced Sledge $57.20 / Ea#8 Fiberglass Sledge $34.45 / Ea#10 Fiberglass Sledge $38.45 / Ea

Blacksmiths Cross Pein32 oz. Blacksmith Cross Pein$10.65/Ea

Drilling Hammer2# Drilling Hammer $10.50 / Ea3# Drilling Hammer $12.10 / Ea4# Drilling Hammer $14.20 / Ea

6# Wood Choppers Maul $22.60 / Ea

Axes and Hatchets

1-1/2# Half Hatchet-14" long $23.95/Ea2-1/4# House-19" long $14.85/Ea2-1/4# Standard-28" long $29.95/Ea3-1/2# Single Bit-36" long $29.95/Ea3-1/2# Double Bit-36" long $32.85/Ea

Gooseneck Crow Bar

1/2" x 12" Gooseneck $3.90 / Ea5/8" x 18" Gooseneck $6.60 / Ea3/4" x 24" Gooseneck $10.65 / Ea3/4" x 30" Gooseneck $13.00 / Ea3/4" x 36" Gooseneck $15.25 / Ea

HAND TOOLS


Work Gloves

Leather Palm Glove• Sewn from durable

heavy shoulderleather

• Full jersey-lined palmand thumb

• Generously sized for agood working fit

#2104, Knit-Wrist $2.85 / Pair#2114, Safety Cuff $2.65 / Pair#2214, Gauntlet Cuff $3.45 / Pair

Yellow Flannel Glove• Canvas back chore gloves

lets your hands breathe

#4032, Knit-Wrist $1.95 / Pair

White Cotton Glove• 100% cotton• Clute cut design with knit wrist

#23011 $.75 / Pair

Brown Jersey Glove• 100% cotton heavyweight

clute cut jersey• Matching knit wrist.

#1845 $.85 / Pair

Red Flannel Lined Jersey Glove• Gunn cut, 100% cotton

brown jersey• Red cotton fleece lining

#4027 $1.95 / Pair

Dotted-Palm Knit Wrist Glove• Clute cut 100% cotton

flannel• Plastic dots on palm,

thumb and index finger forgreat grip and long wear

#4011 $1.45 / Pair

Embossed Double-Dip PVC Glove• Black PVC coated with

non-slip rough finish• Sanitized fleeced jersey

liner• Recommended for rough handling and

wet applications.

#111, Fully coated gauntlet $5.95 / Pair

PVC Knit Wrist Glove• Black PVC coated with

smooth finish• Knit wrist; Men's large

#108 $3.70 / Pair

Top Grain Pigskin Glove• Shirred elastic at wrist

#4052 $8.00 / Pair

Latex Gloves

#6000 Yellow Flocklined Latex Gloves• 18 mil thick, 12" long• Embossed grip• Shields hands from

detergents, acids, and alcoholAvailable in small, medium, or large.Please specify size when ordering.

$1.60 / Pair

Disposable Latex Gloves• Industrial grade latex• 100 pair per box

Small $7.15 / BoxMedium $7.15 / BoxLarge $7.15 / Box

Nitrile Gloves

Blue Nitrile Gloves• Disposable 9-1/2" blue

nitrile, lightlypowdered, 5 mil

• 100 gloves per box

Large $16.05 / Box

Magla Products

Chemical Resistant Gloves• Superior protection when working with

household, industrial, & other chemicals

Pro Chem Gloves• Heavy duty, neoprene coated, jersey

lined• One size fits most

#2101, knitwrist $7.95 / Pair

#2201, 12" gauntlet cuff $10.95 / Pair

Farm Chem Gloves• Heavy duty, vinyl/nitrite blend coated

#22101, jersey knitwrist cuff $6.30 / Pair

Stripping Chemical Gloves• Heavy duty, latex coated, flock lined,

13" gauntlet cuff

#3021-01, small $3.05 / Ea#3022-01, medium $3.05 / Ea#3023-01, large $3.05 / Ea#3024-01, extra-large $3.05 / Ea

Lined Leather Gloves

Pile-Lined Split Leather Gloves• Tough split leather with

pile lining, gunn-cutdesign with keystonethumb, shirred elastic back,size large

#4176L $6.55 / Ea

Thinsulate Lined Leather Gloves• Tough split leather with

Thinsulate insulation,gunn-cut design withkeystone thumb andshirred elastic back, size large

#4179L $7.70 / Ea

HAND TOOLS - Metco Supply

Documents

Transcript of HAND TOOLS - Metco Supply