HAND TOOLS - strebau.rostrebau.ro/catalog/Sylvac/Catalogue_e8_EN_Hand_tools.pdf · HAND TOOLS In...
Transcript of HAND TOOLS - strebau.rostrebau.ro/catalog/Sylvac/Catalogue_e8_EN_Hand_tools.pdf · HAND TOOLS In...
HAND TOOLSIn 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise.
Today, Sylvac remains a leader in this market and offers a range of calipers with digital read-out of a measurement capacity from 150 to 3000 mm. Other handtools complete this range.
Sylvac inductive measuring system (patented)
Data output
Power supply: Lithium battery 3V, Type CR 2032
Operational temperature: +5 to +40°C
mm/inch selection
926.6721
926.5133
926.6723
S_Cal PROPROXIMITYDESCRIPTION
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandground
•Thumbwheelonrequest(seeaccessories)
•Greatcomfortofusethankstoitsergonomicframe
Digital display LCD,Height of digits 7 mm
S_Connect Proximity
Thickness of frame 3.5 mm
Simple and intuitive functions
Caliper
* description on page 5
Proximity output data !
A
8
USB / RS232 / Wireless 2)
S_Cal PRO
910.1522
200
30
290.5
50
14
19
16 x 3.5
4 x 1.4
910.1532
300
30
388
64
14
19
16 x 4
---
910.1502
150
201)
234.5
40
11
16
16 x 3.5
4 x 1.4
910.1507
150
201)
234.5
40
11
16
16 x 3.5
Ø 1.5
PROXIMITYDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
A mm
B mm
C mm
D mm
E mm
Depth rod mm
Protection rating according to IEC 60529
S_Connect : Proximity
Functions
Smart Inductive Sensor1) > 100 mm : 30 µm / DIN 8622) see cables chapter
Caliper
IP67 with or without connector
Zero setting, mm/inch, Data
A
9
926.6721
926.5133
926.6723
S_Cal PRO µmPROXIMITY MICRONDESCRIPTION
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Thumbwheelonrequest(seeaccessories)
•Mechanicalframeinstainlesssteel,hardenedandground
•ImprovedparallelismofinternaljawscomparedtoversionS_CalPRO
• Preset
•Resolution 0,001mm or 0,00005’’
• 4µm repeatability
Digital display LCD,Height of digits 7 mm1 µm resolution
S_Connect Proximity
Thickness of frame 3.5 mm
Simple and intuitive functions
Micron Caliper
4µm repeatability
* description on page 5
Proximity output data !
A
10
910.9502 910.9507
150 150
151) 151)
234.5 234.5
40 40
11 11
16 16
16 x 3.5 16 x 3.5
4 x 1.4 Ø1.5
USB / RS232 / Wireless 2)
S_Cal PRO µmPROXIMITY MICRONDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
A mm
B mm
C mm
D mm
E mm
Depth rod mm
Protection rating according to IEC 60529
S_Connect : Proximity
Functions
Smart Inductive Sensor1) < 100 mm: 15 µm / > 100 mm : 30 µm / DIN 8622) see cables chapter
Micron Caliper
IP67 with or without connector
mm/inch, preset, zero setting, Data
A
11
S_Cal EVOSTANDARDDESCRIPTION
• Standard professionnal caliper
•Newextra-largedisplay
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
•Thumbwheelonrequest(seeaccessories)
Digital display LCD,Height of digits 11.5 mm Thickness of frame 3.5 mm
Simple and intuitive functions
Caliper
* description on page 5
Coolant and lubricant resistant
Sliding mechanism
Spring gib
A
12
IP54
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
295_
910_
001{
.prt/
asm
} D
essi
n:29
5_91
0_07
1 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
D
B
C
A
4x1.
4
E
1.5
810.1402810.1502
810.1407810.1507
810.1422810.1522
810.1432810.1532
Range 150mm 150mm 200mm 300mmA 234.5 234.5 290.5 388B 40 40 50 64C 11 11 14 14D 16 16 19 19E 16 x 3.5 16 x 3.5 16 x 3.5 16 x 4
Depth 4 x 1.4 Ø 1.5 4 x 1.4 -
PM 295.910.071 810.1402 810.1502810.1407 810.1507810.1422 810.1522810.1432 810.1532.
Rev. Date Visa
- 01-Feb-16 FSt
S_Cal EVO no outputIP54 and IP67
E
810.1402
150
201)
234.5
40
11
16
16 x 3.5
4 x 1.4
810.1422
200
30
290.5
50
14
19
16 x 3.5
4 x 1.4
810.1432
300
30
388
64
14
19
16 x 4
---
810.1407
150
201)
234.5
40
11
16
16 x 3.5
Ø 1.5
S_Cal EVOSTANDARDDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
A mm
B mm
C mm
D mm
E mm
Depth rod mm
Protection rating according to IEC 60529
Functions
Smart Inductive Sensor1) > 100 mm : 30 µm / DIN 862
Caliper
Zero setting, Preset (max 999.99), mm/inch, Hold
Spring gib
A
13
S_Cal EVO BTBLUETOOTH®DESCRIPTION
• Integrated Bluetooth® Smart data transmission
•Newextra-largedisplay
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
•Thumbwheelonrequest(seeaccessories)
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Caliper
* description on page 5
Bluetooth® 4.0 built-in
Bluetooth® data transmission and IP67 protection rating!
A
14
D
B
C
A
E
4x1.4
810.1506
150
201)
234.5
40
11
16
16 x 3.5
4 x 1.4
810.1526
200
30
290.5
50
14
19
16 x 3.5
4 x 1.4
810.1536
300
30
388
64
14
19
16 x 4
---
810.1516
150
201)
234.5
40
11
16
16 x 3.5
Ø 1.5
S_Cal EVO BTBLUETOOTH®DIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
A mm
B mm
C mm
D mm
E mm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor1) > 100 mm : 30 µm / DIN 862
Caliper
IP67
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Built-in BLUETOOTH® 4.0*Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
15
S_Cal EVOCARBIDEDESCRIPTION
• Integrated Bluetooth® Smart data transmission (depends on model)
• Carbide tips
•Newextra-largedisplay
•Programmablebuttonaccordingtoyourneeds(dependsonmodel)
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
•Thumbwheelonrequest(seeaccessories)
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Caliper
* description on page 5
Bluetooth® 4.0 built-in
Carbidetips
Carbide tips
A
16
IP54 IP67
- Built-in BLUETOOTH® 4.0*
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
295_
017_
001{
.prt/
asm
} D
essi
n:29
5_01
7_07
1 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
D
B
C
A
E
4x1.
4
PM 295.017.071 810.1509....
Rev. Date Visa
- 24-Nov-15 FSt
S_Cal EVO BT150mm rect MD
810.1409
150
201)
234.5
40
11
16
16 x 3.5
Ø 1.5
810.1509
150
201)
234.5
40
11
16
16 x 3.5
4 x 1.4
S_Cal EVOCARBIDEDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
A mm
B mm
C mm
D mm
E mm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor1) > 100 mm : 30 µm / DIN 862
Caliper
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
17
S_Cal EVO BT µmMICRONDESCRIPTION
• Integrated Bluetooth® Smart data transmission
•Newextra-largemicrondisplay
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
•Thumbwheelonrequest(seeaccessories)
Digital display LCD,Height of digits 11.5 mm,1 µm resolution
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Micron Caliper
* description on page 5
Bluetooth® 4.0 built-in
4µm repeatability
A
18
IP67 IP67
Built-in BLUETOOTH® 4.0*
D
B
C
A
E
4x1.4
810.9506
150
151)
234.5
40
11
16
16 x 3.5
4 x 1.4
810.9516
150
151)
234.5
40
11
16
16 x 3.5
Ø 1.5
S_Cal EVO BT µmMICRONDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
A mm
B mm
C mm
D mm
E mm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor1) > 100 mm : 30 µm / DIN 862
Micron Caliper
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
19
S_Cal EVO BT EGEXTERNALGROOVEDESCRIPTION
• Integrated Bluetooth® Smart data transmission
•Specialjawsformeasuringgroovesandexternalseatings
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Special caliper
* description on page 5
Bluetooth® 4.0 built-in
For measuring grooves and external seatings
Special jaws for mesuring grooves and external seatings
A
20
810.1602
150
201)
4 x 1.4
IP67
Built-in BLUETOOTH® 4.0*
16
234.5
16x3
.5
4x1.
4
50
23
10
2.5
4
S_Cal EVO BT EGEXTERNALGROOVEDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error G µm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor
1) > 100 mm : 30 µm / DIN 862
Special caliper
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
21
S_Cal EVO BT IGINTERNALGROOVEDESCRIPTION
• Integrated Bluetooth® Smart data transmission
•Specialjawsformeasuringgroovesandinternalseatings
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Special caliper
* description on page 5
Bluetooth® 4.0 built-in
For measuring grooves and internal seatings
Special jaws for mesuring grooves and internal seatings
A
22
810.1600
150
201)
4 x 1.4
IP67
Built-in BLUETOOTH® 4.0*
16
234.5
16x3
.5
4x1.
4
50
23
10
2.5
4
S_Cal EVO BT IGINTERNALGROOVEDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Special caliper
Measuring range mm
Max. Error G µm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor
1) > 100 mm : 30 µm / DIN 862 * Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
23
S_Cal EVO BT DMDEEPMEASUREMENTDESCRIPTION
• Integrated Bluetooth® Smart data transmission
•Longinternaljawsfordeepmeasurements
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Special caliper
* description on page 5
Bluetooth® 4.0 built-in
Long jaws
Long internal jaws fordeep measurements
A
24
810.1603
150
201)
4 x 1.4
IP67
Built-in BLUETOOTH® 4.0*
40
11234.5
16x3
.5
4x1.
4
45
S_Cal EVO BT DMDEEPMEASUREMENTDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Special caliper
Measuring range mm
Max. Error G µm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor
1) > 100 mm : 30 µm / DIN 862 * Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
25
M2.5
S_Cal EVO BT PJPOINTSJAWSDESCRIPTION
• Integrated Bluetooth® Smart data transmission
•Interchangeableroundpolishedanvilsformeasuringinternalgrooves
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
•Greatcomfortofusethankstoitsergonomicframe
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs
Thickness of frame 3.5 mm
Simple and intuitive functions
Special caliper
* description on page 5
Bluetooth® 4.0 built-in
Interchangeable anvils
Round-tipped anvils for grooves and internal seatings
A
26
810.1601
150
201)
4 x 1.4
IP67
Built-in BLUETOOTH® 4.0*
16
234.5
16x3
.5
4x1.
4
50
23
5
12
Ø2.
5
4.7
S_Cal EVO BT PJPOINTSJAWSDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Special caliper
Measuring range mm
Max. Error G µm
Depth rod mm
Protection rating according to IEC 60529
Connection
Functions
Smart Inductive Sensor
1) > 100 mm : 30 µm / DIN 862 * Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
27
PRB812.2232
PRC812.2233
PRD812.2234
PRE812.2235
PRF812.2236
S_Depth EVO BT TJTWOFIXEDMEASURINGJAWSDESCRIPTION
Depth gauge
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs Thickness of frame 3.5 mm
Simple and intuitive functions
Bluetooth® 4.0 built-in
Bridge of 100mm
• Integrated Bluetooth® Smart data transmission
•Specialdepthgaugewithbridge100mmandclampingscrew
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
Interchangeable anvils
Optional accessories
PRA (included)810.2231
PRA-W (titanium)810.2237
A
28
812.1601 812.1603 812.1605
200 300 500
0.01
300 400 600
16x3.5
Built-in BLUETOOTH® 4.0*
PRA PRB PRC PRD PRE PRF
100
PRA PRB PRC PRD PRE PRF
100
810.2231/810.2237 810.2232 810.2233 810.2234 810.2235 810.2236
S_Depth EVO BT TJTWOFIXEDMEASURINGJAWSDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error µm
Resolution mm
A mm
B mm
Connexion
Functions
Smart Inductive Sensor1) ± 1 digit2) see cables chapter
Depth gauge
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
Interchangeable anvils
A
29
S_Depth EVO BT SFSHORTCUTMEASURINGFACEDESCRIPTION
Depth gauge
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs Thickness of frame 3.5 mm
Simple and intuitive functions
Bluetooth® 4.0 built-in
Bridge of 100mm
• Integrated Bluetooth® Smart data transmission
•Specialdepthgaugewithbridge100mmandclampingscrew
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
Bridge of 100mm with clamping screw
A
30
812.1611 812.1613 812.1615
200 300 500
0.01
300 400 600
16x3.5
Built-in BLUETOOTH® 4.0*
SEZ ASTAUTILE A CODICE RIS TOLL
DIGI ECO R/L BRIDGE IP67
ARTICOLO PESO
CODICE ARTICOLO PESO
CODICE ARTICOLO PESO
12 X 4 12 X 4 12 X 4 12 X 4 12 X 4 12 X 4
DIGI ECO R/L BRIDGE 200 DIGI ECO R/L BRIDGE 250 DIGI ECO R/L BRIDGE 300 DIGI ECO R/L BRIDGE 400 DIGI ECO R/L BRIDGE 500 DIGI ECO R/L BRIDGE 600 600
300 400 500
700 600
400 500
200 250
300 350
0.01
0.01 0.01 0.01
0.01 0.01
0.03
0.02 0.03
0.03 0.03 0.03
12 X 4 0.01 0.02 DIGI ECO R/L BRIDGE 150 150 250 0,2600,2950,3150,3300,3500,3900,430
78101781027810378104781057810678107
BRIDGE ECO 320 0.35078108
BRIDGE ECO 200 0.23078109
PONTI
5.5
100
Ø5
70
A
9
70 70 70
320
8
M4
65 70 65
200
8
M4
B
S_Depth EVO BT SFSHORTCUTMEASURINGFACEDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error µm
Resolution mm
A mm
B mm
Connexion
Functions
Smart Inductive Sensor1) ± 1 digit2) see cables chapter
Depth gauge
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
A
31
S_Depth EVO BT RPROTARYPINDESCRIPTION
Depth gauge
Digital display LCD,Height of digits 11.5 mm
Programmable button according to your needs Thickness of frame 3.5 mm
Simple and intuitive functions
Bluetooth® 4.0 built-in
Adjustable anvil
• Integrated Bluetooth® Smart data transmission
•Specialdepthgaugedoublewithadjustableanvilandclampingscrew
•Programmablebuttonaccordingtoyourneeds
•Waterprotected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529,
•Automaticwake-upbymovingtheelectroniconhisframe.(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse.(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Maximumspeedofdisplacement:2.5m/sec
•Mechanicalframeinstainlesssteel,hardenedandgrinded
Adjustable anvil !
A
32
812.1621 812.1623 812.1625
200 300 500
0.01
300 400 600
16x3.5
Built-in BLUETOOTH® 4.0*
SEZ ASTAUTILE A CODICE RIS TOLL
DIGI ECO R/L BRIDGE IP67
ARTICOLO PESO
CODICE ARTICOLO PESO
CODICE ARTICOLO PESO
12 X 4 12 X 4 12 X 4 12 X 4 12 X 4 12 X 4
DIGI ECO R/L BRIDGE 200 DIGI ECO R/L BRIDGE 250 DIGI ECO R/L BRIDGE 300 DIGI ECO R/L BRIDGE 400 DIGI ECO R/L BRIDGE 500 DIGI ECO R/L BRIDGE 600 600
300 400 500
700 600
400 500
200 250
300 350
0.01
0.01 0.01 0.01
0.01 0.01
0.03
0.02 0.03
0.03 0.03 0.03
12 X 4 0.01 0.02 DIGI ECO R/L BRIDGE 150 150 250 0,2600,2950,3150,3300,3500,3900,430
78101781027810378104781057810678107
BRIDGE ECO 320 0.35078108
BRIDGE ECO 200 0.23078109
PONTI
5.5
100
Ø5
70
A
9
70 70 70
320
8
M4
65 70 65
200
8
M4
B
S_Depth EVO BT RPROTARYPINDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error µm
Resolution mm
A mm
B mm
Connexion
Functions
Smart Inductive Sensor1) ± 1 digit2) see cables chapter
Depth gauge
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
Zero setting, Preset (max 999.99), mm/inch, Hold, Data
Adjustable anvil !
A
33
910.2207
910.2205
910.2201
810.2203
812.2240 320 8
812.2241 200 8
400
8500
600
SEZ ASTAUTILE A CODICE RIS TOLL
DIGI ECO R/L BRIDGE IP67
ARTICOLO PESO
CODICE ARTICOLO PESO
CODICE ARTICOLO PESO
12 X 4 12 X 4 12 X 4 12 X 4 12 X 4 12 X 4
DIGI ECO R/L BRIDGE 200 DIGI ECO R/L BRIDGE 250 DIGI ECO R/L BRIDGE 300 DIGI ECO R/L BRIDGE 400 DIGI ECO R/L BRIDGE 500 DIGI ECO R/L BRIDGE 600 600
300 400 500
700 600
400 500
200 250
300 350
0.01
0.01 0.01 0.01
0.01 0.01
0.03
0.02 0.03
0.03 0.03 0.03
12 X 4 0.01 0.02 DIGI ECO R/L BRIDGE 150 150 250 0,2600,2950,3150,3300,3500,3900,430
78101781027810378104781057810678107
BRIDGE ECO 320 0.35078108
BRIDGE ECO 200 0.23078109
PONTI
5.5
100
Ø5
70
A
9
70 70 70
320
8
M4
65 70 65
200
8
M4
B
SEZ ASTAUTILE A CODICE RIS TOLL
DIGI ECO R/L BRIDGE IP67
ARTICOLO PESO
CODICE ARTICOLO PESO
CODICE ARTICOLO PESO
12 X 4 12 X 4 12 X 4 12 X 4 12 X 4 12 X 4
DIGI ECO R/L BRIDGE 200 DIGI ECO R/L BRIDGE 250 DIGI ECO R/L BRIDGE 300 DIGI ECO R/L BRIDGE 400 DIGI ECO R/L BRIDGE 500 DIGI ECO R/L BRIDGE 600 600
300 400 500
700 600
400 500
200 250
300 350
0.01
0.01 0.01 0.01
0.01 0.01
0.03
0.02 0.03
0.03 0.03 0.03
12 X 4 0.01 0.02 DIGI ECO R/L BRIDGE 150 150 250 0,2600,2950,3150,3300,3500,3900,430
78101781027810378104781057810678107
BRIDGE ECO 320 0.35078108
BRIDGE ECO 200 0.23078109
PONTI
5.5
100
Ø5
70
A
9
70 70 70
320
8
M4
65 70 65
200
8
M4
B
812.2242
812.2243
812.2244
2.90
2.40
1.90
1.40
0.90
3.00
3
76
S_Ca
l PRO
µm
S_Ca
l PRO
S_Ca
l EVO
S_Ca
l EVO
BT
S_Ca
l EVO
µm
ACCESSORIESFORCALIPERS
Base for Depth Measurement
Thumb wheel
Thumb wheel
S_Cal / S_Depth
Accessory kit for S_Cal
See also chapter cables.
ACCESSORIESFORSPECIALDEPTHCALIPER(TJ/SF/RP)
Length Thickness
Additional base
Additional base
Double additionnal base
A
34
S_Cal / S_Depth
APPLICATIONS
Depth measurement with S_Cal PRO and base 910.2205.
BASICINSTRUMENT
Instrument according to technical specifications
Lithium battery CR2032 included
Instruction manual
Calibration certificate (S_Cal PRO et EVO µm)
S_Cal PRO µmComparison measurement
S_Cal with kit 910.2207Depth measurement of small internal Ø
Part measurement with S_Cal µm Depth measurement with S_Cal EVO µmPart measurement with sending data
A
35
Special S_Cal & S_DepthAPPLICATIONS
Internal groove measurement withS_Cal EVO BT IG
Internal groove measurement withS_Cal EVO BT IG
Internal measurement with S_Cal EVO BT PJ
Deep measurement withS_Cal EVO BT DM
Deep measurement withS_Cal EVO BT DM
External groove measurement withS_Cal EVO BT EG
External groove measurement withS_Cal EVO BT EG
External groove measurement withS_Cal EVO BT EG
S_Depth EVO BT TJ communicating with Sylvac BT Smart App on touchpad
A
36
926.6821
926.5132
905.4516
S_Depth PRODESCRIPTION
•PRESETfunction
•Automaticswitchingofmeasuringdirection
•Settingofthe«constant»formeasurementwith
cylindricalorsphericalanvils(withaccessory805.6103)
•Additionalbasesavailable(seeaccessories)
Digital rotating display LCD
Measuring anvil with pin ø 4 mm(measuring ball probe M2.5 in standard)
Base 100mm with clam-ping system for additional bases.
Depth gauge
Automatic reference switching (REFI/ REFII)by the measurement inversion
Clamping knob
A
37
805.6005 805.6006
300 600
30 40
10 10
422 625
483 773
Ø 44
112
100
70 12
27
B
520
822
34
A (co
urse
)
1.2
USB / RS232 / Wireless 2)
S_Depth PRODIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error µm
Repeatability 1) µm
A mm
B mm
S_Connect : Power
2 References
PRESET function1) ± 1 digit2) see cables chapter
Depth gaugeA
38
805.2180 180 mm 8 mm
805.2260 260 mm 8 mm
805.2320 320 mm 8 mm
805.6101
805.6102
805.6103
S_Depth PROBASICINSTRUMENT
Instrument according to technical specifications
Lithium battery CR2032 included
Instruction manual
COMPATIBLEACCESSORIES
Measure of an internal groove (height) thanks to the constant.
Depth gauge
APPLICATIONS
Additionnal base
Additionnal base
Additionnal base
Ball probe M2.5 (standard)
Anvils UP&DOWN
Anvil with pin Ø4 mm
Length Thickness
Depth measurement Depth measurement in a drilling with anadditionnal base
A
39
926.6721 926.6723
3m = 3.3 kg
DESCRIPTION
UL4Ultra light caliper
Stainless steel external jaws,thickness 8 mm, titanium coated
Hollowed section aluminium beam reinforced by four stainless steel rods. Measu-ring scale resistant to liquid
Digital display LCD,Height of digits 20 mm
Left moving cursorlocking lever
• Integrated Bluetooth® Smart data transmission
•Mobilejaws
•Internalandexternalmeasurement
•Thissystemensuresaperfectguidanceandprotectsthebeamagainstshocks
•Displaystheupperandlowertolerances
•Extremelylightinstrument
•IP67protection
Jaws of200mm
A
40
811.1404 811.1406 811.1410 811.1415 811.1420 811.1425 811.1430
400 600 1000 1500 2000 2500 3000
30 40 50 90 120 150 200
20 30
0-478 0-683 0-1093 0-1608 0-2123 0-2638 0-3153
27-505 27-710 27-1110 27-1635 27-2150 27-2665 27-3180
796 1001 1411 1926 2441 2956 3471
7.5 - 11.5 (+20%)
Bluetooth® Smart* / Proxi.-RS232 , -USB
+9999.99 mm / +399.9995 IN
1.5 1.6 1.9 2.3 2.6 2.9 3.3
DIMENSIONALDRAWING
UL4Ultra light caliper
TECHNICALSPECIFICATIONS
Measuring range mm
Max.Error µm
Repeatability µm
A mm
C mm
B mm
Measuring Force N
S_Connect
IP67 Protection
Preset max.
Weight kg
Setting by PC
2 references
Min/Max function
Tolerance limit indicators
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
41
UL 400 UL 600 UL 1000 UL 1500 UL 2000 UL 2500 UL 3000
40/20 50/20 70/20 130/30 180/40 220/40 320/40
70/40 80/40 120/40 200/50 300/60 400/70 500/80
mm 400 600 1000 1500 2000 2500 3000
A mm 0-478 0-683 0-1093 0-1608 0-2123 0-2638 0-3153
C mm 27-505 27-710 27-1110 27-1635 27-2150 27-2665 27-3180
B mm 796 1001 1411 1926 2441 2956 3471
811.2316.99 811.2317.99
L mm < 300 < 400
M mm L - 75
UL4Ultra light caliperSPECIALEXECUTIONS|SPECIALJAWSTYPEA
TECHNICALSPECIFICATIONS
UL specification
Special jaws (pair) Lenght L to specify with order (max 400 mm)
Max. error. [μm] / Repeatability [μm]
With Jaws 811.2316.99
With Jaws 811.2317.99
Measuring range
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
42
UL 400 UL 600 UL 1000 UL 1500 UL 2000 UL 2500 UL 3000
mm 40/20 50/20 70/30 120/30 170/30 210/30 300/40
mm 50/30 60/30 90/30 150/30 200/40 300/40 400/50
mm 400 600 1000 1500 2000 2500 3000
A mm 0-478 0-683 0-1093 0-1608 0-2123 0-2638 0-3153
C mm 44-522 44-727 44-1137 44-1652 44-2167 44-2682 44-3197
B mm 796 1001 1411 1926 2441 2956 3471
811.2319.99
L max mm 300
M mm L - 75
UL4Ultra light caliperSPECIALEXECUTIONS|SPECIALJAWSTYPEC
TECHNICALSPECIFICATIONS
UL specification Max. error. [μm] / Repeatability [μm]
Special jaws (pair)
With Jaws ≤ 200
With Jaws ≤ 300
Measuring range
Lenght L to specify with order (max 300 mm)
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
43
811.8040 811.8060 811.8100 811.8150 811.8200 811.8250 811.8300
400 600 1000 1500 2000 2500 3000
30 40 50 90 120 150 200
20 30
26-480 26-685 26-1095 26-1610 26-2125 26-2640 26-3155
10-464 10-669 10-1079 10-1594 10-2109 10-2624 10-3139
796 1001 1411 1926 2441 2956 3471
7.5 - 11.5 (+20%)
Bluetooth® Smart* / Proxi.-RS232 , -USB
+9999.99 mm / +399.9995 IN
1.1 1.2 1.5 1.9 2.2 2.5 2.9
UL H4DIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max.Error µm
Repeatability µm
A mm
C mm
B mm
Measuring Force N
S_Connect
IP67 Protection
Preset max.
Weight kg
Setting by PC
2 references
Min/Max function
Tolerance limit indicators
Ultra light caliper
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
44
811.6100 811.6150
1000 1500
100 130
20
0 - 1030 0 - 1545
400 600
1242 1757
Bluetooth® Smart* / Proxi.-RS232 , -USB
+9999.99 mm / +399.9995 IN
UL V4DIMENSIONALDRAWING
Ultra light depth gauge
TECHNICALSPECIFICATIONS
Measuring range mm
Max.Error µm
Repeatability µm
A mm
C mm
B mm
S_Connect
IP67 Protection
Preset max.
Weight kg
Setting by PC
2 references
Min/Max function
Tolerance limit indicators
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
45
814.1510 814.1515 814.1520 814.1525 814.1530
1000 1500 2000 2500 3000
60 90 120 150 200
20
0 - 1120 0 - 1620 0 - 2120 0 - 2620 0 - 3120
1306 1806 2306 2806 3306
3 4 5 6 7
Bluetooth® Smart* / Proxi.-RS232 , -USB
+9999.99 mm / +399.9995 IN
1.2 1.5 1.8 2.2 2.5
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
279_
020_
005{
.prt/
asm
} D
essi
n:27
9_02
0_07
2 .d
rw
CH-1023 Crissier (Suisse)
e-mail : vente @ sylvac.ch sav @ sylvac.chweb site : www.sylvac.ch
A (course)
B
153 153500
23 10
20 38
170
60
40
2525
Nb rangées de trous(voir tableau)
5.5
Rev. Date Visa
- 24-Apr-15 MTr
Type A B Nb rangéesde trous
1000mm / 40'' 0 - 1120 1306 3
1500mm / 60'' 0 - 1620 1806 4
2000mm / 80'' 0 - 2120 2306 5
2500mm / 100'' 0 - 2620 2806 6
3000mm / 120'' 0 - 3120 3306 7
3x M3 + 2x M4
3x M3 + 2x M4
2x M3
UL D4DIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max.Error µm
Repeatability µm
A mm
B mm
Number range of raws
S_Connect
IP67 Protection
Preset max.
Weight kg
Setting by PC
2 references
Min/Max function
Tolerance limit indicators
Ultra light digital scale
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
46
811.2301
811.2302
811.2303
811.2305
UL4
UL
H4
ULV
4
UL
D4
Ultra light caliperACCESSORIES
Universal base (2 pieces)
Ø8 Probe holder (2 pieces)
Accessories holder (2 different pieces)
Support with int. thread M 2.5 formeasuring anvils, (2 pieces)
See also cables chapter
A
47
811.2307
811.2309
811.2304
811.2310
811.2311
811.2312
811.6306
811.6310
811.6315
UL4
UL
H4
ULV
4
UL
D4
Ultra light caliperACCESSORIES
See also cables chapter
Inserts in hardened steel, cone 60° for boreclearance measurement > 10 mm, (2 pieces)
Holder for dial gauge contact points for internal groove measurement, (2 pieces)
Thread anvils holders for thread measurement., (2 pieces)
Probe Ø10mm (2 pieces)
Probe Ø20mm (2 pieces)
Probe Ø25x5mm (2 pieces)
Wooden box for UL4 400 and 600mm
Wooden box for UL4 1000mm
Wooden box for UL4 1500mm
A
48
BASICINSTRUMENT
APPLICATIONS
External measure with UL4 Internal measure with UL4
Instrument according to technical specifications
Lithium battery CR2477 included
Adapter for Lithium battery CR2032
Instruction manual
Calibration certificate for UL4 up to 1500
UL4, movable left jaw
Ultra light caliperA
49
S_Scale WORK
926.6821
926.5132
905.4516
DESCRIPTION
Digital display LCD,Height of digits 6 mm
Beam in stainless steel, hardened and grounded
Digital scales
Aluminium carriagePlastic rotating display on 270°
Clamping device supplied in standard
•Maxdisplacementspeed:2m/sec
•RS232orUSBDataoutput
•ExternalpowersupplybyPowercable
•Easytointegrateinyourprojects
A
50
USB / RS232 / Wireless 2)
•••
+1-1
+1-1
52.5
106
15
47.5
29.2
M4
M4
70
Ø44
Ø44
8
26
13.5
205
B
22
C
6.2
A (course)
816.1015
150
H / V
20
10
0.01
185
282
298
816.1020
200
H / V
20
10
0.01
235
332
348
816.1030
300
H / V
30
10
0.01
335
432
448
816.1060
600
H / V
30
10
0.01
665
762
778
S_Scale WORKDIMENSIONALDRAWINGS
TECHNICALSPECIFICATIONS
Measuring range mm
Type
Max. Error µm
Repeatability 1) µm
Resolution mm
A mm
B mm
C mm
S_Connect : Power
Selection of measuring direction
PRESET function
2 references1) ± 1 digit2) see cables chapter
Digital scalesA
51
926.6721
926.5133
926.6723
S_Mike PRODESCRIPTION
•Automaticwake-upbymovingthemeasuringspindle(AbsoluteSystemS.I.S)
•Sleepingmodeafter20min.ofnouse(AbsoluteSystemS.I.S)
•Positionmemorizedinsleepingmode,Absolute System S.I.S*
•Waterprotectedforheavy-dutyworkwithcoolantsandlubricants,protectionratingIP67accordingto
IEC 60529, even connected
•Measuringrange0-161mmcovered with 5 instruments only
•Setof3micrometers0-102mmavailable
•Quickdisplacementofthemeasuringspindle10mm/rotation
•Adjustablemeasuringforce5N/10N(versions903.030X)
•Repeatabilityandreproducibilityneverreachedbefore
•Thimbleinpolyacetal-copolymer
Fast handle movementwith ratchetNon-rotating spindle Ø 6.5 mm
Simple and friendly functions
S_connect proximity or Bluetooth®
Professional micrometer
Measuring surfacein hard metal
CYLINDRICALØ6.5
* description on page 5
A
52
803.0300 903.0600 903.1000 903.1360 903.1600
0-30 30-66 66-102 100-136 125-161
3 4 5 7 8
1 1 1 2 2
Ø6.5
37.3 73.3 109.3 143.3 168.3
27.5 43 60 95 110
68 74 74 74 74
12.5 13.5 14.5 19.5 19.5
63 86 106 151 169
181 230 269 306 339
7.2 9 9 9 9
USB / RS 232 / Wireless 3)
5N / 10N 10N
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
001_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
1 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
D
4.5
56.4
6.5B
28.5
A
E
C
FG
R11.6
13.8
11.6
48.5
28
2
5
15.2
50°
15.5
6.5
0.75
6.5
PM 276.011.071 803.0300 (0-30mm)803.0301 (0-25mm)803.0302 (0-25mm)..
Rev. Date Visa
- 16-Oct-15 FSt
Micrometer S_Mike V20-30mm (0-25mm)
803.0301A=34.6
803.0302A=34.3
S_Mike PRODIMENSIONALDRAWING
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Anvils types
A mm
B mm
C mm
D mm
E mm
F mm
G mm
S_Connect : Proximity
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) see cables chapter
Professional micrometer
IP67 even connected
CYLINDRICALØ6.5 A
53
803.0306 903.0606 903.1006
0-30 30-66 66-102
3 4 5
1 1 1
Ø6.53)
37.3 73.3 109.3
27.5 43 60
68 74 74
12.5 13.5 14.5
63 86 106
181 230 269
7.2 9 9
Built-in BLUETOOTH® Smart*
5N / 10N 10N
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
001_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
1 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
D
4.5
56.4
6.5B
28.5
A
E
C
FG
R11.6
13.8
11.6
48.5
28
2
5
15.2
50°
15.5
6.5
0.75
6.5
PM 276.011.071 803.0300 (0-30mm)803.0301 (0-25mm)803.0302 (0-25mm)..
Rev. Date Visa
- 16-Oct-15 FSt
Micrometer S_Mike V20-30mm (0-25mm)
803.0301A=34.6
803.0302A=34.3
S_Mike PRODIMENSIONALDRAWING
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Anvils types
A mm
B mm
C mm
D mm
E mm
F mm
G mm
S_Connect
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) Other anvils type on demand.
Professional micrometer
IP67 even connected
CYLINDRICALØ6.5BLUETOOTH®
* Up to 8 instruments connected per dongle #981.7100More informations on How to use Bluetooth® leaflet SYL_1401_EN_BT
A
54
803.0301 903.0601 903.1001
0-25 25-60 60-95
3 4 5
1 1 1
Ø2
34.6 70.6 106.6
27.5 43 60
68 74 74
15.2 16.2 17.2
63 86 106
181 230 269
7.2 9 9
USB / RS 232 / Wireless 3)
5N / 10N 10N
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
041_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
2 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
B
28.5
E
C
FG
R11.6
13.8
11.6
48.5
28D A
Ø2
2
550°
PM 276.011.072 803.0301 (0-25mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2cyl. Ø2 (0-25mm)
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
041_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
2 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
B
28.5
EC
FG
R11.6
13.8
11.6
48.5
28D A
Ø2
2
550°
PM 276.011.072 803.0301 (0-25mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2cyl. Ø2 (0-25mm)
X
X
S_Mike PROS_Mike PROProfessional micrometerCYLINDRICALØ2DIMENSIONALDRAWING
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Anvils types
A mm
B mm
C mm
D mm
E mm
F mm
G mm
S_Connect : Proximity
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) see cables chapter
IP67 even connected
A
55
803.0302 903.0602 903.1002 903.1302 903.1602
0-25 25-60 60-95 95-130 120-155
3 4 5 6 7
1 1 1 2 2
0.75x6.5
34.3 70.3 106.3 140.3 165.3
27.5 43 60 95 110
68 74 74 74 74
15.5 16.5 17.5 22.5 22.5
63 86 106 151 169
181 230 269 306 339
7.2 9 9 9 9
USB / RS 232 / Wireless 3)
5N / 10N 10N
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
051_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
3 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
B
28.5
E
C
FG
R11.6
13.8
11.6
48.5
28
7.5
6.5
AD
6.5
6.5
0.75
PM 276.011.073 803.0302 (0-25mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2Knife-shaped (0-25mm)
X
X
Available for:Ref. Nr:
Dim
ensi
ons
in m
mToutes modifications réservées - Anderungen vorbehalten - Changes without prior notice M
odèl
e:P
M27
6_01
1_05
1_FE
RM
E{.p
rt/as
m}
Des
sin:
276_
011_
073
.drw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
B
28.5
E
C
FG
R11.6
13.8
11.6
48.5
28
7.5
6.5
AD
6.5
6.5
0.75
PM 276.011.073 803.0302 (0-25mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2Knife-shaped (0-25mm)
S_Mike PRODIMENSIONALDRAWING
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Anvils types
A mm
B mm
C mm
D mm
E mm
F mm
G mm
S_Connect : Proximity
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) see cables chapter
S_Mike PROProfessional micrometer
IP67 even connected
KNIFE-SHAPEDA
56
803.0303
0-30
1
2
Ø25
5N
USB / RS 232 / Wireless 3)
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
921_
053_
FER
ME
{.prt/
asm
} D
essi
n:27
6_92
1_07
4 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
27.5
28.5
63
68
181 7.2
13.8
11.6
48.5
2812.5 37.3
4.5
Ø25
0.5
PM 276.921.074 803.0303 (0-30mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2Disc-Shaped (0-30mm)
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
921_
053_
FER
ME
{.prt/
asm
} D
essi
n:27
6_92
1_07
4 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
27.5
28.5
63
68
181 7.2
13.8
11.6
48.5
2812.5 37.3
4.5
Ø25
0.5
PM 276.921.074 803.0303 (0-30mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2Disc-Shaped (0-30mm)
X
X
S_Mike PROS_Mike PROProfessional micrometerDISC-SHAPEDDIMENSIONALDRAWING
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Flatness µm
Parallelism µm
Gear unit
Anvils types
S_Connect : Proximity
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) see cables chapter
IP67 even connected
4 (full-touch-contact) / 10 (partial contact)
5 (full-touch-contact) / 10 (partial contact)
Measurable module > 0.5
A
57
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
054_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
5 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
27.5
28.5
63
68
1817.2
R11.6
13.8
11.6
48.5
2815
7
7
34.8
Ø6.
5
PM 276.011.075 803.0304 (0-30mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2Flat-spherical Ø7
S_Mike PRODIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) see cables chapter
S_Mike PROProfessional micrometerFLATØ6.5/SPHERICALØ7
903.0304
0-30
3
1
1
Ø7 flat and Ø7 spherical
USB / RS 232 / Wireless 3)
5N / 10N
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Parallelism µm
Anvils types
S_Connect : Proximity
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
IP67 even connected
A
58
Available for:Ref. Nr:
Dim
ensi
ons
in m
m
Toutes modifications réservées - Anderungen vorbehalten - Changes without prior notice Mod
èle:
PM
276_
011_
055_
FER
ME
{.prt/
asm
} D
essi
n:27
6_01
1_07
6 .d
rw
CH-1023 Crissier (Suisse)
web site : www.sylvac.ch sav @ sylvac.che-mail : vente @ sylvac.ch
56.4
27.5
28.5
63
68
1817.2
R11.6
13.8
11.6
48.5
2815
7
7
34.8
R3.5
PM 276.011.076 803.0305 (0-30mm)....
Rev. Date Visa
- 02-Nov-15 FSt
Micrometer S_Mike V2Spherical Ø7
S_Mike PROS_Mike PROProfessional micrometerSPHERICALØ7DIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
1) according to DIN 8632) ± 1 digit3) see cables chapter
903.0305
0-30
4
1
Ø7 2 spherical
USB / RS 232 / Wireless 3)
5N / 10N
Measuring range mm
Max. Error G 1) µm
Repeatability 2) µm
Anvils types
S_Connect : Proximity
Prot. rating accor. to IEC 60529
Setting by PC
Adjustable measuring force
Non-rotating spindle
Fast movement
Preset function
Smart Inductive Sensor
IP67 even connected
A
59
903.0330
903.0620
903.1020
903.1620
903.1300
0-102
910.1301
150 / 0-30
903.1301
0-102
903.1301
BASICINSTRUMENT
S_Mike PROProfessional micrometer
Instrument according to technical specifications
Standard bar 50 mm (for 903.060X)
Standard bar 75 mm (for 903.100X)
Lithium battery CR2032 included
Instruction manual
Calibration certificate
903.0300 / 0600 / 1000
Standard bar 50 mm
Standard bar 75 mm
Lithium battery CR2032 included
Instruction manual
Calibration certificate
Measuring range mm
Plastic case
Aluminium case
Stand
Standard bar 50 mm
Standard bar 75 mm
Standard bar 125 mm
ACCESSORIES
910.1301 including:910.1502, 903.0300 and 903.0330
BASICINSTRUMENTMICROMETERSSETS
A
60
S_Mike PROProfessional micrometerMODELS
Cylindrical Ø6.5mm Proximity / Cylindrical Ø6.5mm Bluetooth®
Disk Ø25mm
Ball-Ball Ø7mm
Flat Ø6.5mm-Ball Ø7mm
Knife 0.75x6.5mmCylindrical Ø2mm
APPLICATIONS
Part measurementLength measurement of a lathed partPart measurement with a S_Mike PRO Disk
A
61
926.6821
926.5132
905.4516
Digital micrometer screwsDESCRIPTION
•DataoutputRS232,combinedwithexternalpowersupply
•Fineadjustmentavailable(accessories)
•HorizontalandVerticaluse(sametype)
•Reduceddimensions(compact)
•Otherhandwheelsonrequest
Digital display LCD,Height of digits 6 mm
Tungstencarbide anvil
Non-rotating spindle Ø 6.5 mm
Rotating display, Ø 44 mm over 270°
Clamping Ø 12h6
HandwheelØ 50 mm (standard)
A
62
USB / RS232 / Wireless 1)
•••
852.2001
0-25
5
2
0.001
74.5
33.1
852.2011
0-50
8
2
0.001
98.5
57.1
Digital micrometer screwsDIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range mm
Max. Error µm
Repeatability µm
Resolution mm
A mm
B mm
S_Connect : Power
Selection of measuring direction
PRESET function
Absolute or relative measurement1) see cables chapter
A
63
•••••
BASICINSTRUMENT
Digital micrometer screws
Fine adjustment device
Handwheel Ø 50 mm with crank handle for fast motion
Handwheel Ø 34 mm
852.2310
852.2311
852.2312
ACCESSORIES
Instrument according to technical specifications
Lithium battery CR2032 included
Instruction manual
Handwheel Ø 50 mm (852.2311)
Calibration certificate
APPLICATIONS
Fine adjustment device type 852.2310 Use on measuring microscope Handwheel use
A
64
926.6621
926.5131
926.6521
DESCRIPTION
•Measuringrange1x360°,2x180°,4x90°
•Mechanicalpartsinstainlesssteel
Digital Display LCD, rotatingdisplay Height of digits 8.5 mm
Fine adjustment knob
Locking device
Stainless steel, hardened and ground
S239ProtractorA
65
DIMENSIONALDRAWING
TECHNICALSPECIFICATIONS
Measuring range
Max. Error
Resolution
Max. rotation speed
Protection rating according to IEC 529
S_Connect : Opto
Selection of measuring direction
820.1700
0-360°
4 minutes of arc
1 minute of arc / 0.01°
1080° / sec
IP51
USB / RS232 / Wireless 1)
BASICINSTRUMENT
Instrument according to technical specifications
Wooden box 2) Scale 200 mm (820.2420)
Lithium battery CR2032 included
Instruction manual
1) see cables chapter
2) Fumigated, compatible ISPM 15 and NIMP 15
S239ProtractorA
66
ACCESSORIES
Scale L 200 mm
Scale L 300 mm
Scale L 500 mm
Stand for vertical application and small angular measurements
Square for small angular measurements
820.2420
820.2430
820.2450
820.2460
820.2461
APPLICATIONS
Measurement with accessory type 820.2460 Measurement with accessory type 820.2461Standard measurement
S239ProtractorA
67