HAND GRINDER - Factorymax · Evolutionary Five Identities of New Emax EVOlution "Tough Torque...
Transcript of HAND GRINDER - Factorymax · Evolutionary Five Identities of New Emax EVOlution "Tough Torque...
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
220
ULTRA-PRECISION BRUSHLESS MICRO-GRINDER
Maximized EvolutionEvolutionary Five Identities of New Emax EVOlution"Tough Torque Brushless Motor" "Flashing Live Load Indicator" "Auto-Cruise Control" "FIXPEED Function"and
"STYLE"
HA
ND
GR
IND
ER
221
Advanced Control Function
Upgraded Digital Display. EVOLUTION on Speed Control Volume with Flash Load Indicator.
Diversity for work efficiency
Advanced User Friendly Design
New Industrial Design.EVOLUTION from Tower-type solid E-Max to User-oriented Identity. Design meets Performance.
Motor speed digital display Memory Speed Function FiXpeed®
An exclusive new feature of the Emax EVOlution, the FiXpeed® system allows everyone easily to fix speed of motor A and B independently prior to operate. For example motor A can be set to maintain the speed set by the FiXpeed® system while motor B has variable control using a foot controller. This function brings for unprecedented workability.
Auto Cruise Function
The control unit is equipped with an Auto Cruise Function. While using foot control for work, anyone could fix the motor at any speed by the embedded motor switch. Once speed is set, foot pedal control is not required. This function eliminates foot fatigue during operation.
Control Unit
:Continuous load area:Intermittent load area:Overload
Load Meter
2 Motors of A and B can be connected, and select the suited motor for work situation.
Simultaneous motor operation is not allowable
Advanced High Performance
Accessories : Handpiece Holder : 1 pc., Handpiece Stand : 1 pc.Power Supply Cord : 1 pc.
Forward/Reverse rotationcan be selected.
ø12mm SpeedControl Volume
Motor B ON/OFF Function
Memory SpeedFunction FiXpeed ®
Motor AON/OFF Function8227
(230V)
ModelCAT. No. Specifications
8224(120V) NE249 120
NE249 230Power Source : AC120/230V, 50-60HzDimensions : W130 x D254 x H97 mm
Emax EVOlution Control Unit
Forward / ReverseSelect Switch
Easy to operate by one finger
HA
ND
GR
IND
ER
222
Provides choice of various applications.
2 Types of Motors
16 Type of Attachmentsfor All Type of Applications
One Touch Tool Changing
Ring Type (IR-310)Easy twist open/close chuck
Various Collet Chuck Size
Various sizes ranging from ultra-small diameter (0.3 mm) are available for each attachment. Furthermore, collet replacement can be easily performed without spanner.
Special Dust ProtectionMechanism (patented)
Capable of infinite applications with 13 different handpieces and 3 types of intermediate attachments.* Interchangeable with attachments form the E-max and ROTUS system.
NAKANISHI Smart Switch
The switch provides a click sensation. A confirmation tone is reacted by the control unit when the switch is operated. The motor type is distinguishable by the switch color.
Blue
Green
Standard Type Motor 1,000~40,000 min -1 (ENK-410S)Torque Type Motor 1,000~25,000 min -1 (ENK-250T)
Excellent Durability
High performance brushless motor eliminates the need of changing carbon brushes.RPM variation is minimal even when load changes. Allowing difficult and stable cutting in stress free motion. Suitable performance for finish grinding.Provides superior quietness and smoothness from low speed to high speed.
Handpiece System
Exclusive use for Emax EVOlution*Emax EVOlution and Electer E-max have different motor cord pin configurations.
Emax EVOlution Electer E-max
The chuck section of Emax EVOlution has a special built-in dust protection mechanism that prevents entry of foreign materials suchas chips, and provides superior durability as well.
Emax EVOlution vsE-max Torque Characteristic
1 2 3 4 5 6
10000
20000
30000
40000
50000
T (N·cm)
N (
/ min
-1)
EVO-S (Standard)EVO-T (Torque)E-max-S (Standard)E-max-T (Torque)
E-max-S
EVO-S
EVO-T
E-max-T
HA
ND
GR
IND
ER
223
Capable for wide range of applications. An excellenttotal balance in motor performance and dimensionagainst required rotational speed.
1,000~40,000 min-1
* New Ring Type IR-310 is the standard attachment forEmax EVOlution standard set EV410-120, EV410-230.
Micro Grinder (IR-310+ENK-410S) : 1 pc.Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachControl Unit (NE249) : 1 pc.Handpiece Holder : 1 pc.Handpiece Stand : 1 pc.Power Supply Cord : 1 pc.Spanner (7 x 5.1) : 1 pc. Pin Spanner (K-233) : 1 pc.L Shaped Spanner : 1 pc.
StandardEquipment
Attachment
IR-310Motor
ENK-410S
New
New
1,000~25,000 min-1
For heavy duty and larger tools, Torque type promisesto extend operation ranges.
* New Ring Type IR-310 is the standard attachment forEmax EVOlution torque set EV250-120, EV250-230.
Micro Grinder (IR-310+ENK-250T) : 1 pc.Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachControl Unit (NE249) : 1 pc.Handpiece Holder : 1 pc.Handpiece Stand : 1 pc.Power Supply Cord : 1 pc.Spanner (7 x 5.1) : 1 pc. Pin Spanner (K-233) : 1 pc.L Shaped Spanner : 1 pc.
StandardEquipment
Attachment
IR-310Motor
ENK-250T
RING TYPE STANDARD SET
RING TYPE TORQUE SET
CAT.No. Model82228225
(120V)(230V)
EV410-120EV410-230
(120V)(230V)
CAT.No. Model82238226
(120V)(230V)
EV250-120EV250-230
(120V)(230V)
HA
ND
GR
IND
ER
224
Motor
Attachment
CAT. No. Model System Chart
Control Unit
3 : Use 6mm torque Type HG-200 to connect ENK-250T
Can be used for Emax series attachments, reducers, and extension joint
Exclusive use forEmax EVOlution
Exclusive use forEmax EVOlution
When using Emax EVOlution, be careful for MaximumAllowable Speed.
6 mm Torque Type (* 3)
1016 HG-20025,000 min-1 Max. (* 1)
Lever Type1005 IH-300
Ring Type1147 IR-310
90° Mini Angle Type1012 MFC-300S
15,000 min-1 Max. (* 1)
Long Type1017 BMH-300
35,000 min-1 Max. (* 1)
90° Mini Angle Type (Very Small Head)
1013 MFC-300M15,000 min-1 Max. (* 1)
90° Angle Type1006 IC-300
35,000 min-1 Max. (* 1) 20,000 min-1 Max. (* 2)
45° Angle Type1014 KC-300
35,000 min-1 Max. (* 1) 20,000 min-1 Max. (* 2)
LUSTER(Reciprocating motion )
1302 LS-10030,000 min-1 Max. (* 1)
LUSTER(Reciprocating motion )
Built-in Motor1483 NLS-110
30,000 min-1 Max. (* 1)
Hammer Action Type8060 HA-500
20,000 min-1 Max. (* 1) 16,000 min-1 Max. (* 2)
SWING-LUSTER (Right to left motion)1380 SLS-16
35,000 min-1 Max. (* 1)
MINI-LUSTER (Reciprocating motion)1307 ML-8
35,000 min-1 Max. (* 1) 30,000 min-1 Max. (* 2)
FINE BELT SANDER1146 KBS-101
35,000 min-1 Max. (* 1)
Extension Joint
May be connected between the motorand the attachment when requiredincreased torque.
1015 CN-01
1/4 Speed Reducer1009 RG-01
1/15 Speed Reducer1010 RG-02
Speed Reducer·Extension Joint
8224 (120V)
8227 (230V)
NE249 120NE249 230
Emax EVOlution Control Unit
Standard Type Motor with Cord1,000~40,000 min-1
8086 ENK-410S
Torque Type Motor with Cord1,000~25,000 min-1
8087 ENK-250T
* 1 : Maximum Allowable Speed, intermittent use.* 2 : Maximum Allowable Speed, continuous use.
* Maximum Allowable Speed, continuous use may change dependingon the material being cut and other application variables.
35,000 min-1 Max. (* 1)
30,000 min-1 Max. (* 1)
30,000 min-1 Max. (* 1)
**
Never connect to Emax Series motor NK-351,NK-261 and NK-151.*
*
New
New
New
HA
ND
GR
IND
ER
225
DescriptionProduct ModelCAT. No. Specifications
Torque TypeMotor with Cord
8087 ENK-250T
n
Standard TypeMotor with Cord
n
Control Unit 8227 7
Emax EVOlution Attachments
8
ø28.
97
ø24.
5
Ring TypeAttachment
Lever TypeAttachment
6 mm Torque TypeAttachment
Long TypeAttachment for Deep HoleGrindingø13 mm
1147
1005
1016
1017
IR-310
IH-300
HG-200
BMH-300
1,000~40,000 min-1
gmm ,
ø2.35 mm .
..
1,000~40,000 min-1
gmm ,
ø2.35 mm .
.
gmm
...
gmm
1 pc. each.
35,000 min-1 (*
90º MINIANGLE TYPEAttachment
Deep Hole
90° ANGLEAttachment
1012
1006
1
..
15,000 min-1 (*
mm
.35,000 min-1 (* 20,000 min-1 (*
90º MINI ANGLE TYPEAttachment
Deep Hole
10131
mm.
.15,000 min-1 (*
New
New
New
64
ø13
ø25
102
ø13
120
62.3
13.8
96
ø8.5
70.3
57.3ø12.8
20.2
45° ANGLEAttachment 1014
mm
.35,000 min-1 (* 20,000 min-1 (*
9.5
95
ø6.8
69.4
ø14
60
61.9ø12.820
.1
n
e 6mm25,000 min-1 (**
HA
ND
GR
IND
ER
226
DescriptionProduct ModelCAT. No. Specifications
MINI-LUSTERAttachment(Pencil-Type Polisher)(Reciprocating motion)
1307 ML-8
mm, Screw clamp type.
8 mmStandard Accessories 1 set
mm) 1 pc.-1 (* 1) 30,000 min-1 (*
LUSTERAttachment(Pistol-Type Polisher)(Reciprocating motion)
LS-100
mm,Screw clamp type.
Standard Accessories 1 set Allen Wrench (2mm) 1 pc., LubricationOil, Lubrication Nozzle for LUSTER
30,000 min-1 Max. (* 1)
Emax EVOlution Attachments
ø15
85.4
119
120
ø20
LUSTERAttachment(Reciprocating motion)Built-in Motor
1483 NLS-110
mm,.
Allen Wrench (2 mm) 1 pc., Lubrication Oil,Lubrication Nozzle for LUSTER
30,000 min-1 Max. (* 1)
119
120
ø20
SWING-LUSTERAttachment
)(Right to Left motion)
HammerAttachment
dOrnament
FINE BELTSANDERAttachment
R
R
EXTENSION JOINT
1380
1015
1009
1010
HA-500
KBS-101
RG-01
RG-02
mm
Standard Accessories 1 setAllen Wrench (1.5mm) 1 pc.
35,000 min-1 Max. (* 1)
4.4,
Bar Wrench (K-212) 1 pc., Oil and nozzle,Hammer Bit (For replacement) 2 pcs.
20,000 min-1 Max. (* 1) -1 Max. (* 2)
8 mm4 mm Belts
Allen Wrench (3mm .35,000 min-1 Max. (* 1)
35,000 min-1 Max. (* 1)
30,000 min-1 Max. (* 1)
30,000 min-1 Max. (* 1)
5
185
50.1
ø18.
9
41.9
ø18.
9
ø18.
9
93
ø14
rn
**
* g
HA
ND
GR
IND
ER
227
COLLET CHUCK & PARTS
90016 MFC-300M
ø1.6
K-253
Product CAT.No.Model Inside Diameter : ød
904929043090493
IC-300, KC-300ø2.35ø3.0ø3.175
CHC-2.3590416 ø1.6CHC-1.6
CHC-3.0CHC-3.175
Fit to
906929063090693 IH-300, IR-310
ø2.35ø3.0ø3.175
CHH-2.35CHH-3.0CHH-3.175
— ø1.0, ø1.5, ø2.0, ø2.5CHH-[][] ø1.6
—ø1.0, ø1.5, ø2.0, ø2.5, ø4.76
CHG-[][] ø1.6, ø4.0, ø5.0
90992909209091690910
9093090993
BMH-300ø2.35ø3.0ø3.175
CHM-2.35ø2.0CHM-2.0ø1.6CHM-1.6ø1.0CHM-1.0
CHM-3.0CHM-3.175
90316 MFC-300S
ø1.6
K-252
9119291130911939116091196
HG-200
ø2.35ø3.0ø3.175ø6.0ø6.35
CHG-2.35CHG-3.0CHG-3.175CHG-6.0CHG-6.35
Parts
Collet Chuck
Fit to
8088
8089
1484
ENK-410S (Standard Type Motor )
ENK-250T (Torque Type Motor)
Straight Cord : 1.5 m<with Switch>
Power Supply Cord
CAT.No. ModelDescriptionProduct
Control Unit :Emax EVOlution NE249
6.7ø1.6
12.7ø1.6
34.4d
33.9d
39d
ENKCD-410S
ENKCD-250T
K-269
8106
8107
8104
Foot ControlON-OFF and speed changecan be accomplished.
Handpiece Holder
Handpiece Stand
Control Unit :Emax EVOlution NE249
Control Unit :Emax EVOlution NE249
FC-64
K-273
K-274
CHC Group
CHG Group
CHH Group
CHM Group
17.2d
HA
ND
GR
IND
ER
228
Brushless Micro Grinder SystemEspert 500ULTRA-PRECISIONMULTI-PURPOSE MICRO-GRINDER Espert 500
High-Power, High-SpeedErgonomically Designed
BBBBBBBBrushlhhlllhllhless Micro Grinder SystemEspert 500ULTRA-PRECISIONMULTI-PURPOSE MICRO-GRINDER
High-Power, High-SpeedErgonomically Designed
HA
ND
GR
IND
ER
229
The Espert 500 brushless motor takes motor technology to an even higher level. The new state of the art motor has dramatically increasedefficiency and torque output. The microprocessor based control unit provides optimal control of the motors and allows for incre ased flexibilityin this multi-function system.
Evolutionary New Design High-Performance Brushless Micro Grinder.
Speed : 1,000~50,000 min-1
Speed is steplessly variable from 1,000~50,000min-1. Smooth and powerful torque is deliveredat both high and low speeds. The extremely highmaximum speed of 50,000 min -1 allows highprecision micro-machining.
Excellent DurabilityHigh performance brushless motor eliminatesthe need to change carbon brushes.NAKANISHI's internal load test has provencontinuous use for more than 5,000 hours. *1
High Precision
Simple Screw on Attachments
NAKANISHI's ultra-precision technology ensuresbur concentricity of 0.02 mm or less, whichallows for very high precision finishing.
NAKANISHI Smart SwitchThe switch provides a click sensation and aconfirmation tone is produced by the control unitwhen the switch is operated. The motor type isdistinguishable by the switch color.
2 Types of MotorsVery high torque from compact motors.
NAKANISHI Smart Switch Color
Compact Type (ENK-500C) 140WTorque Type (ENK-500T) 200W
Low Noise, Low VibrationThe brushless motor and incorporated coolingfan have reduced the vibration and noise levels,resulting in a quieter, more comfortable workenvironment.Dramatically compared with conventional grinders.
Special Dust-Proof MechanismThe handpiece has a patented built-in-dustprotection system to prevent the infiltration ofdust and debris into the front bearings. ThisNAKANISHI patented design assures long-termdurability.
10 Types of Attachments AvailableAll of the Espert 500 system attachments areavailable for use with this system. 9 differenttypes of attachments and 1 speed reducer makingan almost infinite number of applications possible.
Micro Grinder & Handpiece StandThis specially designed micromotor stand allowseasy pick-up and set-down of the micro-grinder.Strong, but soft to the touch, the micro-grinderstand contains convenient, integrated storagecompartments for adjustment spanners and aspare chuck.
Wide Range of Collet Chucks AvailableCollet sizes range from a tiny 0.3 mm up, with awide variety of sizes available. Tools can bechanged without the use of any spanners.
Blue
Gray
NAKANISHI Smart Switch
Ultra-Precision Micro-Grinder
HA
ND
GR
IND
ER
230
New Advanced Design Control Unit
NAKANISHI has given considerable thought to 'behind thescenes' performance. The Espert 500 system complies with theworld's most rigorous EMC * standards. In electromagneticterms, it has been designed to be very safe so as to curb thegeneration of electromagnetic interference (noise), which maycause failure or malfunctions in other equipment. The Espert 500system will not be affected by external electromagneticinterference. The Espert 500 system also complies with the strictEuropean safety standard EN61010-1. Operator safety is alwaysNAKANISHI's highest priority.*EMC (Electromagnetic Compatibility)
The electronic circuits are designed using NAKANISHI's proprietarytechnology to meet eco-friendly expectations by minimizing powerconsumption. Since power demands are minimal, no significantheat is generated and no cooling fan is required.
The control unit is equipped with an auto cruise function thatoperates the micro-grinder at a preset speed without the need to usethe foot pedal. This function eliminates foot fatigue during prolongedoperation.
An exclusive new feature of the Espert 500 system, the FiXpeed®
system allows the user to independently preset the speed of motor Aand motor B. For example motor A can be set to maintain the speedset by the FiXpeed® system while motor B has variable control usinga foot pedal. This function allows for unprecedented flexibility.
Self Check Function (Maintenance Mode) Smooth Operatio Operation Check SoundHighly Visible and easy to operate front panel2-Digit Digital Displa Error Code Display Function
* 1 NAKANSHI's internal endurance tests
The operation of all Espert 500 functions is controlled by a highperformance microcomputer (CPU) that is programmed withNAKANISHI's proprietary technology. NAKANISHI's CPU has directcontrol of the brushless micro-grinder allowing smooth and highlyprecise cutting and polishing of a wide variety of materials. Bur"chatter" has been eliminated. The system automatically senses whichmicromotor is attached (ENK-500C or ENK-500T) and self adjusts toprovide optimum micro-grinder performance.
You no longer need to push a switch on the control unitto switch between hand and foot pedal control. If youwant to operate the motor handpiece by hand simplypush the NAKANISHI Smart Switch, if you want to usefoot pedal control simply depress the foot pedal.
Optimal Control via Microcomputer
Eco-Friendly Design
Auto Cruise Function
Memory Speed Function FiXpeed®
Simplified Hand and Foot Pedal Control
Compliance with EMC and other Safety Standards
A/B 2 Motors Can Be Connected
High Quality Metallic Silver Body
Other Features
9794(230V)
Model snoitacificepS.oN.TAC
9793(120V)
NE96
Power Source : AC120/230V, 50-60HzDimensions : W172 x D230 x H94 mmWeight : 2.6 kgAccessories : Handpiece Stand : 1 pc.
Handpiece Holder : 1 pc.
ESPERT 500 Control Unit
HA
ND
GR
IND
ER
231
59.4180.8
121.4
ø28.
3
ø13.
3
Espert 500 Torque Motor HandpieceNAKANISHI Smart Switch (Gray)
Speed Range 1,000~50,000 min-1
200W250 g excluding cord
Max. OutputWeight
Control Unit (NE96) : 1 pc.Compact Motor Handpiece (ENK50T-HR) : 1 pc.Collet Chuck ø3.0 mm (CHH-3.0),
ø2.35 mm (CHH-2.35) : 1 pc. eachHandpiece Holder : 1 pc.Handpiece Stand : 1 pc.Spanner (7 x 5.1) : 1 pc.Pin Spanner : 1 pc. L-Spanner (9) : 1 pc.
StandardAccessories
CAT.No. Model98839884 ES50T-HR
Attachment
EHR-500Motor
ENK-500TUnit
NE96
(120V)(230V)
Espert 500 Standard Set (Ring Type)
Espert 500 Torque Set (Ring Type)
Control Unit (NE96) : 1 pc.Compact Motor Handpiece (ENK50C-HR) : 1 pc.Collet Chuck ø3.0 mm (CHH-3.0),
ø2.35 mm (CHH-2.35) : 1 pc. eachHandpiece Holder : 1 pc.Handpiece Stand : 1 pc.Spanner (7 x 5.1) : 1 pc.Pin Spanner : 1 pc. L-Spanner (9) : 1 pc.
StandardAccessories
CAT.No. Model98819882 ES50C-HR
Attachment
EHR-500Motor
ENK-500CUnit
NE96
Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each
Spanner (7 x 5.1) : 1 pc.Pin Spanner : 1 pc. L-Spanner (9) : 1 pc.
StandardAccessories
CAT.No. Model9091 ENK50C-HR
Attachment
EHR-500Motor
ENK-500C
Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. each
Spanner (7 x 5.1) : 1 pc.Pin Spanner : 1 pc. L-Spanner (9) : 1 pc.
StandardAccessories
CAT.No. Model9092 ENK50T-HR
Attachment
EHR-500Motor
ENK-500T
(120V)(230V)
High Power System. Max. Output 140WSpeed Range : 1,000 ~50,000 min -1
icroprocessor controlled for optimal motor controlHand Switch [NAKANISHI Smart Switch]Memory Speed Function [FiXpeed®]
Espert 500 Compact Motor Handpiece
Speed Range 1,000~50,000 min-1
140W210 g excluding cord
Max. OutputWeight
59.4167.2
107.8
ø26.
8
ø13.
3
NAKANISHI Smart Switch (Blue)
Highest Power in its Class. Max. Output 200WSpeed Range : 1,000~50,000 min -1
icroprocessor controlled for optimalmotor controlHand Switch [NAKANISHI Smart Switch] Memory Speed Function [FiXpeed®]
HA
ND
GR
IND
ER
232
* 1 : Maximum Allowable Speed, intermittent use.* 2 : Maximum Allowable Speed, continuous use.
* Maximum Allowable Speed, continuous use may change dependingon the material being cut and other application variables.
Compact Motor and Cord1,000~50,000 min-1
Motor
May be connected between themotor and the spindle as requiredfor increased torque.
FINE BELT SANDER
90˚ Angle Type
45˚ Angle Type
LUSTER (Reciprocating motion)
90˚ Angle Torque Type
Ring Type
Lever Type
MINI-LUSTER (Reciprocating motion)
6 mm Torque Type
Attachment
9090 EHR-500
1515 EHL-401
1552 EHG-400
1525 EIC-300
1526 EKC-300
1551 ERA-270
1516 ELS-100
1145 EBS-101
1/4 Speed Reducer1553 ERG-01B
CAT. No. Model
Speed Reducer
System Chart
Control Unit
9088 ENK-500C
9089 ENK-500T
40,000 min-1 Max. (* 1)30,000 min-1 Max. (* 2)
40,000 min-1 Max. (* 2)
40,000 min-1 Max. (* 1)30,000 min-1 Max. (* 2)
40,000 min-1 Max. (* 1)20,000 min-1 Max. (* 2)
40,000 min-1 Max. (* 1)20,000 min-1 Max. (* 2)
40,000 min-1 Max. (* 1)20,000 min-1 Max. (* 2)
40,000 min-1 Max. (* 1)30,000 min-1 Max. (* 2)
30,000 min-1 Max. (* 2)
30,000 min-1 Max. (* 1)
40,000 min-1 Max. (* 2)
EML-81554
Torque Motor and Cord1,000~50,000 min-1
Extension Adaptor1518 ECN-011
Speed Reducer (1/4)1517 ERG-01
Use ECN-011 or ERG-01 for ELECTER E-max, ROTUS attachments
9793 (120V)NE96
Espert 500
9794 (230V)
HA
ND
GR
IND
ER
233
1515 EHL-401 Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachSpanner (7 x 5.1) : 1 pc.
seirosseccAdradnatSledoM.oN.TAC
9090 EHR-500 Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachSpanner (7 x 5.1) : 1 pc. Pin Spanner : 1 pc. L Spanner (9) : 1 pc.
seirosseccAdradnatSledoM.oN.TAC
Ring Type Attachment
Lever Type Attachment
Manufactured with micron level precision for high accuracy andhigh reliability.Slim, lightweight design allows for fine finishing of delicate parts.Ring Type one touch bur release.
ollet ChuckStandard Size : ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachOptional Collets : CHH- [][] are shown
eight : 94 g40,000 min-1 Max. (* 2)
Small, lightweight, high-speed brushless DC motor. Incorporates the NAKANISHI Smart Switch for easy on/offoperation.Very low vibration noise and maintenance.
High-power, high-torque, high-speed brushless DC motor. Incorporates the NAKANISHI Smart Switch for easy on/offoperation.Very low vibration noise and maintenance.
To attain more powerful grinding and fine polishing finish,attachment EHL-401 is designed to make it lightweight and fitto pen-grip type holding.Simple lever turning for bur exchange.Same chuck as used in EHR-500.Collet ChuckStandard Size : ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachOptional Collets : CHH- [][] are shown
eight : 70 g40,000 min-1 Max. (* 2)
RING TYPE ATTACHMENT EHR-5009090
LEVER TYPE ATTACHMENT EHL-4011515
CAT.No.
CAT.No.
COMPACT TYPE MOTOR ENK-500C9088CAT.No.
TORQUE TYPE MOTOR ENK-500T9089CAT.No.
9089 ENK-500T Output Power : 200W Maximum Torque : 8.7 cN·mCord Length : 1.5 m
snoitacificepSledoM.oN.TAC
9088 ENK-500C Output Power : 140W Maximum Torque : 6.0 cN·mCord Length : 1.5 m
snoitacificepSledoM.oN.TAC
Compact Type Motor
Torque Type Motor
1,000~50,000 min -1
1,000~50,000 min -1
107.8
ø24.
5
121.4
ø28.
4
58.9
ø22.
4
ø13.
3
59.4
ø22.
4
ø13.
3
HA
ND
GR
IND
ER
234
ø .t
ø .:
ø .t
eoetSleoM.o.C
eoedradnatSledoM.oN.TAC
1552 EHG-400
seirosseccAdradnatSledoM.oN.TAC
70.7ø17.4
28.5
ø22.
4
68.9ø12.8
20.1
ø22.
4
64.3ø12.8
20.2
ø22.
4
75
ø22.
4
6mm Torque Type Attachment
Torque type attachment used with ø6 mm chuck diameter asstandard and nicely fits in hand-grip.Collet ChuckStandard Size : ø6.0 mm (CHG-6.0) : 1 pc.Optional Collets : CHG- [][] are shown
eight : 110 g40,000 min-1 Max. (* 1) 30,000 min-1 Max. (* 2)
90º Angle Attachment
90˚Angle Attachment with ø3 mm Collet Chuck is convenientlysmall and equally suitable for polishing flat surfaces with rubberpad paper disk, corner work, and grinding the inside of a pipes.
peed Reduction Ratio : 3/4Collet ChuckStandard Size : ø3.0 mm (CHC-3.0) : 1 pc.Optional Collets : CHC- [][] are shown
tandard Accessories : Rubber Pad, Paper Disk Weight : 54 g40,000 min-1 Max. (* 1) 20,000 min-1 Max. (* 2)
45˚Angle Attachment is suitable for working in corners, cavities, etc.Reverse rotation against the motor
peed Reduction Ratio : 3/4 Collet Chuck
: ø3.0 mm (CHC-3.0) : 1 pc.Optional Collets : CHC- [][] are shown
Weight : 54 g 40,000 min-1 Max. (* 1) 20,000 min-1 Max. (* 2)
45º Angle Attachment
90º Angle Torque Attachment
90˚Angle type is suitable for the work of corner and the grindingof the inside of pipe.
peed Reduction Ratio : 1/1.5Collet Chuck
.Optional Collets : - [][] are shown
eight : 107 g40,000 min-1 Max. (* 1) 20,000 min-1 Max. (* 2)
6mm TORQUE TYPE ATTACHMENT EHG-4001552
90°ANGLE ATTACHMENT EIC-3001525
45°ANGLE ATTACHMENT EKC-3001526
90°ANGLE TORQUE ATTACHMENT ERA-2701551
CAT.No.
CAT.No.
CAT.No.
CAT.No.
Collet Chuck ø6.0 mm (CHG-6.0) : 1 pc.Bar Wrench (K-212) : 1 pc.
**
*on the material being cut and other application variables.
HA
ND
GR
IND
ER
235
1145 EBS-101 8 mm Belt (3 different kinds) : 2 pcs. each 6 mm Belt (3 different kinds) : 2 pcs. each4 mm Belt (3 different kinds) : 2 pcs. each Allen Wrench (3 mm) : 1 pc.
CAT. No. Model Standard Accessories
1554 EML-8 0.8 mm Standard Accessories : 1 setAllen Wrench (1.5 mm) : 1 pc.
113
45
119
ø20
CAT. No. Model Standard Accessories
CAT. No. Model seirosseccAdradnatSegnaRekortS
Standard Accessories Allen Wrench (2 mm) : 1 pc.Lubrication Oil Lubrication Nozzle for LUSTER
ELS-1001516
Reciprocating Motion Polishing Finisher LUSTER Attachment
Reciprocating Stroke (variable) : 0~7,600 times/min (Max.)Perfect for final finishing such as lapping and honing aftergrinding. Streamlines conventional hand-finishing of metal molds.Reciprocating type compact special polisher for ESPERT motor.Stroke is adjustable from 0~6 mm. Max. tool shank diameter ø6.4 mm, Screw clamp type.
eight : 680 g30,000 min-1 Max. (* 1)
Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment
Reciprocating Stroke (variable) : 0~10,000 times/min (Max.)Stroke Range : 0.8 mmMax. tool shank diameter ø3.2 mm, Screw clamp type.
eight : 130 g30,000 min-1 Max. (* 2)
FINE BELT SANDER Attachment
The angle of belt section is steplessly adjustable.idth of Belt : 8 mm, 6 mm, 4 mm.
Belt Speed : 0~940 m/min (Max.)Weight : 355 g
40,000 min-1 Max. (* 1) 30,000 min-1 Max. (* 2)
FINE BELT SANDER ATTACHMENT EBS-1011145CAT.No.
Reciprocating Motion Polishing Finisher LUSTER ATTACHMENT ELS-1001516CAT.No.
185
84.5
ø8ø3.3
ø15
Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER ATTACHMENT EML-81554CAT.No.
HA
ND
GR
IND
ER
236
1518 ECN-011 1
. M l S
41
29
e.
-1 (* 1)-1 (* 2)
Extension Adaptor
SPEED REDUCER (1/4) ERG-011517
EXTENSION ADAPTOR ECN-0111518
SPEED REDUCER (1/4) ERG-01B1553CAT..
CAT..
CAT..
-1 (* 1)-1 Max. (* 2)
The Adaptor can be used with theattachments for E-max andROTUS you already have.Weight : 31 g
40,000 min-1 Max. (* 1)30,000 min-1 Max. (* 2)
1553 ERG-01B Speed Reduction Ratio 1/4
CAT. No. Model Speed Reduction RatioSpeed Reducer (1/4)
Speed Reduction Ratio 1/41517 ERG-01
CAT. No. Model Speed Reduction RatioSpeed Reducer (1/4)
ESPERT 500 Spare Parts
1440
8104
Product CAT. No.Description Specifications
Variable Speed Control Foot Pedal
9093
9094
Compact Motor Cord 1.5 m Long
Torque Motor Cord 1.5 m Long
FC-40
Z095209
ENKCD-50C
ENKCD-50T
Model
Foot Pedal
Espert 500Handpiece Stand
Espert 500 CompactMotor Cord
Espert 500 TorqueMotor Cord
40
ø22.
4
* 1 : Maximum Allowable Speed, intermittent use.* 2 : Maximum Allowable Speed, continuous use.
* Maximum Allowable Speed, continuous use may change dependingon the material being cut and other application variables.
HA
ND
GR
IND
ER
237
Advanced Polishing Performance
Power and Comfort forPolishing Professionals
ULTRASONIC POLISHER
HA
ND
GR
IND
ER
238
ULTRASONIC POLISHERSHEENUSneocan be used for grinding, polishing and mirrorfinishing on a wide range of materials from aluminum dies tocemented carbide dies. It is also perfect for plastic molds, press,casting, forging, trimming and header dies.This tool quickly removes hard layer of EDM deposits andpolishes difficult areas such as complex corners and ribs.
Ultra Sonic Products
39.5 KHz
22.5 KHz
SHEENUS neo
SONIC-CUTTER
HIGH PERFORMANCE ULTRA-SONIC CUTTER
* Not available for sale in Europe.Max. Output Power : 30WIntricate and accurate cutting with a light touch.Machine attachment type is also available.
HA
ND
GR
IND
ER
239
2 Mode Display Selection Switch
Foot PedalCarrying Handle(Pullout type)
Output Power Control Knob
Power Switch Clamp or Unclamp Mode Switch
Vibration ON/OFF Switch (At OFF mode Foot Pedal can be operated)
SHEENUS neo Standard SetCAT. No. Model Standard Equipment
80948093
US-25PBS 120V
US-25PBS 230V
CAT. No. Model Standard Accessories
80968095
NE240 120V
NE240 230V
CAT. No. Model Specifications
8099 US-25PBAttachment fixing : M6 screwCable length : 2 mDimensions: ø16 (Max. ø28)x L134 mmWeight :140 g (excluding cable)
Fuse
Control Unit (NE240 120V / 230V) Ultrasonic Handpiece (US-25PB) Included Accessories(Tip Holder 2 pcs., Ceramic fiber grindstone 1 pc., Electroplated diamond file 1 pc.) : 1 setTool box (plastic) : 1 pc. Handpiece stand (Z095209) : 1 pc. Spanner (10 mm) Allen Wrench (2.5 mm) Foot Pedal (FC-24) : 1 pc.
“ SHEENUSneo” can be used for grinding, polishing and mirror finishing on a wide range of materials from
and header dies.This tool quickly removes hard layers of EDM deposits and polishes difficult areas such as complex corners and
aluminum dies to cemented carbide dies. It is also perfect for plastic molds, press, casting, forging, trimming
ribs.Capabilities include bur removal, grinding and polishing of precision molds, dies electronic and ceramic components.
Ergonomically comfortable and light for effortless workover long periods.Lightweight, resin body ergonomically designed to provideprecise control while operating.
Specifications
Unit Model : NE240 120V / 230VPower Source : AC120V/230V, 50-60Hz Power consumption : 100VADimensions : W225 x D195 x H97 mm Oscillation frequency : 22.5KHz (center frequency)Power conditioning : Continuous variable typeFrequency control : Homing typeOutput power : UNCLAMP mode Max. 45W
: CLAMP mode Max. 20WWeight : 1.7 kg
Handpiece Model : US-25PBOscillator : PZT piezoelectric typeAttachment fixing : M6 screwCable length : 2 mDimensions : ø16 (Max. ø28) x L134 mmWeight : 140 g (excluding cable)
134
ø28
ø16
SHEENUS neo STANDARD SET
CONTROL UNIT NE240 120V / NE240 230V
HANDPIECE US-25PB8099CAT.No.
Digital Displayed Function2 Mode Display Selection : “WATT” “POWER”Easy Touch Function SwitchesPowerful and ConstantMaximum output of 45W (Center Frequency 22.5KHz) andconstant output power.
Tip holder and Ceramic fiber grindstone in this picture are notprovided when only handpiece US-25PB is purchased.
*
HA
ND
GR
IND
ER
240
DescriptionProductProduct CAT. No. Description
SHEENUS neo Spare Parts
8104
FC-24Foot Pedal (ON/OFF switch only)
Z095209Handpiece Stand
8103 Spanner
Allen Wrench
10 mmAvailable in the market
2.5 mmAvailable in the market
4115 10
1
4
M645˚
4415 13
4
1M6
5015 19
4
0.4M6
407 18
ø1 M6
ø3
4017 8
M6
4017 8
3 M6
4117 7
2
3
M6
10520 70
1
5
M6
13740 6020
1
53
M6
10520 70
1
8
M6
407 18
ø2 M6
40
ød
40
2
10
40
ø3
3
6
40
M6
7 4.5
10 d ød
20
M6
7 4
20
10 t t
t
4
20
M612 t
ød
8 1720
10M6
d
Grit# 200# 320# 600
601016010260103
CAT. No.# 200# 320# 600
601556015660157
Grain diameterd=ø2 mmd=ø3 mm
6080160802
CAT. No.
60811
60805
6081560815
# 200# 320# 600
601816018260183
# 200# 320# 600
601856018660187
# 200# 320# 600
601916019260193
# 200# 320# 600
601156011660117
d=ø2.0 mmd=ø3.0 mmd=ø3.3 mm
609016090260903
d=ø2.0 mmd=ø3.0 mmd=ø3.3 mm
609116091260913
t = 0.8 mmt = 1.0 mmt = 2.0 mmt = 3.0 mmt = 3.3 mm
6092160922609236092460925
t = 1.0 mm 60927
# 200# 320# 600
602316023260233
# 200# 320# 600
602356023660237
# 200# 320# 600
601056010660107
# 200# 320# 600
601116011260113
# 200# 320# 600
601516015260153
# 180# 300# 400# 600# 800# 1,000# 1,200
60701607026070360704607056070660707
60711607126071360714607156071660717
W=4 mm W=6 mmW=4 mm W=6 mm# 180# 300# 400# 600# 800# 1,000# 1,200
60721607226072360724607256072660727
60731607326073360734607356073660737
ø3 mm# 180# 300# 400# 600# 800# 1,000# 1,200
63101631026310363104631056310663107
1.0
w
50
0.8
w
50
ø3
50
10 M4
M6
12
60941
0.8
1.5
1.5
Brass lapping tip
Grit CAT. No.
Wood lapping tip
CAT. No.
CAT. No.
CAT. No.
Grain diameter
Color roloCtirG roloCtirG GritIvoryBrownOrangeBlackBlueWhitePink
IvoryBrownOrangeBlackBlueWhitePink
IvoryBrownOrangeBlackBlueWhitePink
(5 pcs./pack)
(10 pcs./pack)
(2 pcs./pack)
(2 pcs./pack)
(2 pcs./pack)Special stone holders sold separately
(1 pc./pack)
HA
ND
GR
IND
ER
241
Nomenclature of Control Unit NE80
Features and Application SamplesDesigned compact and light weight with an easy hand grip to reducefatigue, the Sonic-Cutter allows for long continuous operation.This ideal handpiece offers excellent maneuverability and there is novibration to the hand ensuring an accurate and sharp cutting finish.The controller automatically adjusts the output power depending onload so there is no need to make minor adjustments on the controllerduring the working process.Constant frequency provides steady cutting results. From simplework to fine cutting and complicated shapes, the Sonic-Cutterperforms effortlessly and beautifully.
OPTIONALThe Sonic-Cutter US-l6CB (with clamp) for machine attachment isavailable with internal coolant air joint to withstand long continuousoperation.If Foot Pedal FC-40 is connected, ON-OFF switch operation is madeby foot.
For cutting rubber film, etc.
Beautiful cutting finish is made forcutting out designs and patterns onrubber, POP sheet, paper, etc.
Oscillating Frequency : 39.5KHz · Max. Output Power : 30WIntricate and accurate cutting with a light touch.Machine attachment type is also available.
Hand-Held Type Cutter US-15CB
For cutting of sheet, cloth, etc.
Delicate and beautiful cutting with alight touch can be made on sheet,cloth, etc.
For correction of PCB patterns
Most suitable for accurate correctionwork required on PCB.
Control Unit NE80
Specifications
Piezoelectric Transducer : Bolt-Clamped PZT TypeWeight : Approx. 210 g (w/cord) Cord Length : 3 m
Specifications
Power Source : AC120/230V, 50-60HzMax. Output Power : 30W Oscillating Frequency : 39.5KHzOscillating System : Automatic Oscillation,
Automatic TruckingDimensions : W150 x D250 x H120 mmWeight : 2.6 kg
For cutting and deburring of plastics
Efficient for cutting and deburring ofcomposite material of FRP and plasticmaterials.
156
ø20
ø25
OutputLamp
HandpieceStand
Connectorfor Cutter
Output ON / OFF Swtich
PowerSwitch
OutputAdjustmentKnob
PowerLamp
SONIC-CUTTER Standard SetCAT. No. Model Standard Equipment
9925(120V)
9926(230V)
US-15CBS
Control Unit (NE80) : 1 pc. Hand-Held Sonic-Cutter w/cord (US-15CB) : 1 pc. Allen Wrench (1.5 mm) : 3 pcs. Spare Set Screw : 4 pcs. Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚) Ground Wire : 1 pc. Tool Stand (Spiral Spring) : 1 pc. Washer : 1 pc. Tool Stand Holder : 1 pc. Hexagon Socket Head Bolt : 1 pc. Allen Wrench (5.0 mm) : 1 pc.
* Not available for sale in Europe.
SONIC-CUTTER STANDARD SET
SONIC-CUTTER
HA
ND
GR
IND
ER
242
Specifications ·· Power Source : AC120/230V, 50-60HzMax. Output Power : 30W Oscillating Frequency : 39.5KHzOscillating System : Automatic Oscillation,
Automatic TruckingDimensions : W150 x D250 x H120 mm Weight : 2.6 kg
Specifications ·· Piezoelectric Transducer : Bolt-Clamped PZT TypeWeight : Approx. 210 g (w/cord) Cord Length : 3 m
Specifications ·· Piezoelectric Transducer : Bolt-Clamped PZT TypeWeight : Approx. 290 g (w/cord)Cord Length : 3 m
CAT. No. Model Standard Accessories
1496 US-15CBAllen Wrench (1.5 mm) : 3 pcs.Spare Set Screw : 4 pcs.Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚)
CAT. No. Model Fit to
1440 FC-40 SONIC-CUTTER
FOOT PEDAL FC-401440CAT.No.
4mm
Spare BladeProductCAT. No. Description · Model
Spare Blade Made by NT Co. BDC-200T 30˚Spare blade is available at ashop near you.
-
CAT. No. Model Standard Accessories
9927(120V)
9928(230V)
NE80
Ground Wire : 1 pc.Tool Stand (Spiral Spring) : 1 pc.Washer : 1 pc. Tool Stand Holder : 1 pc.Hexagon Socket Head Bolt : 1 pc.Allen Wrench (5.0 mm) : 1 pc.
156
ø20
ø25
156
ø26
ø8.5
ø32
ø50.
5
CAT. No. Model Standard Accessories
1498 US-16CBAllen Wrench (1.5 mm) : 3 pcs.Air Hose (4 m)Spare Set Screw : 4 pcs.Spare Blade : 40 pcs. (made by NT Co. BDC-200T 30˚)
HAND-HELD TYPE CUTTER US-15CB1496CAT.No.
CUTTER FOR MACHINE ATTACHMENT US-16CB1498CAT.No.
SONIC-CUTTER CONTROL UNIT NE80
HA
ND
GR
IND
ER
243
ULTRA-PRECISION HIGH-TORQUE AIR GRINDER
Interchangeability with a variety of attachmentsideal for any applications.
The air motor is utilizes a special vanedesign which keeps constant speed evenunder load providing stable grinding andpolishing operation
A Special Rotary VaneAir Motor is Incorporated
Capable of infinite applications with 13 differenthandpieces and 3 types of intermediateattachments.
16 Types of Attachments forAll Types of Applications
To prevent twisting of the hose, 360 Twist- FreeJoint connects the motor and the hose
Twist Free Hose
HA
ND
GR
IND
ER
244
MINI-LUSTER (Reciprocating motion )
CAT. No. Model
1005 IH-300
Attachment
1147 IR-310
1016 HG-200
1017 BMH-300
1012 MFC-300S
1013
1006 IC-300
1014 KC-300
1302 LS-100
1307 ML-8
1380 SLS-16
8060 HA-500
1146 KBS-101
SWING-LUSTER(Right to Left motion )
Hammer Action Type
FINE BELT SANDER
Long Type
LUSTER(Reciprocating motion )
90° Angle Type
45° Angle Type
90° Mini Angle Type
90° Mini Angle Type (Very Small Head)
Lever Type
Ring Type
6mm Torque Type
Extension Joint
1/4 Speed Reducer
1015 CN-01
1009 RG-01
Speed Reducer · Extension Joint
27,000 min-1 Max. (* 1)
15,000 min-1 Max. (* 1)
15,000 min-1 Max. (* 1)
20,000 min-1 Max. (* 2)
20,000 min-1 Max. (* 2)
20,000 min-1 Max. (* 1) 16,000 min-1 Max. (* 2)
1003 IM-300
Air Motor with Chip Air Mechanism3,000~30,000 min-1
1004 IM-301
Air Motor with 360˚ Twist-Free Joint3,000~30,000 min-1
ir Line kit
AL-0306
oot Control
AFC-45
MFC-300M
1545
1064
1/15 Speed Reducer1010 RG-02
May be connectedbetween the motorand the attachmentas required forincreased torque.
ROTUS System Chart
*
* Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables.* 1 : Maximum Allowable Speed, intermittent use. * 2 : Maximum Allowable Speed, continuous use.
* This air line kit is designed for use withthe AFC-45 foot control, CAT. No.1064.
HA
ND
GR
IND
ER
245
160.8
ø13
30,000 min-1
High torque air motor assembled with special vane mechanism.Two types of air motors can be selected depending on the application. 1/4 and 1/15 Speed Reducers (RG-01, RG-02) can be connected.
A Special Rotary Vane Air Motor is Incorporated
The air motor is utilizes a special vanedesign which keeps constant speed evenunder load providing stable grinding andpolishing operation.
Ultra-Precision High-Torque Air Grinder
SpecificationsSpeed : Max. 30,000 min-1 (0.4MPa)Proper Air Pressure : 0.3-0.45MPaAir Consumption : 75NL/minOutput Power : 46W (motor)Max. Torque : 6.6 cN · m (0.4MPa)Motor : Air motor IM-301Dimensions : Air motor (IM-301) + Attachment (IR-310) See left figuresWeight : Air motor (IM-301) + Attachment (IR-310) : 222 g
One Touch Tool Changing
Wide-range of Collet Chuck Sizes
Various sizes ranging from ultra-small diameter (0.3 mm) are available for each attachment.Furthermore, collet replacement can be easilyperformed without spanner.
Special Dust ProtectionMechanism (patented)
The chuck section of ROTUS has a specialbuilt-in dust protection mechanism thatprevents entry of foreign matter such as chipsand provides superior durability.
16 Types of Attachments for All Types of Applications
Capable of infinite applications with 13 differenthandpieces and 3 types of intermediate attachments.
Interchangeable with attachments form theELECTER E-max series.
Twist Free Hose To prevent twisting of the hose, 360˚ Twist- FreeJoint connects the motor and the hose.
Ring Type (IR-310)Ring operated open/close chuck
Attachment IR-310 + Air motor IM-301
*
Ring SwitchAssembled with ON/OFF,speed control and FWD./REV.control ring switch.
HA
ND
GR
IND
ER
246
ROTUS STANDARD SET (Ring Type)1148CAT.No.
This model incorporates the top seller beingused in many applications throughout theworld. As well as providing an excellentbalance of speed, torque, size and weight, itis capable of dealing with rough or precisework. Furthermore the bur can be replacedwith one touch, just by turning the ring.
30,000 min-1
Air Grinder (IR-310+IM-301) : 1 pc.Collet Chuck ø3.0mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachAir Line Kit (AL-0306) : 1 pc.Foot Control (AFC-45) : 1 pc.Hose for Piping (K-260) 2m : 1 pc. Lubricating Oil (K-211) : 1 pc.Pin Spanner (K-233) : 2 pcs.
StandardEquipment
CAT.No. Model1148 R301-IR
Attachment
IR-310Motor
IM-301
* The new ring type IR-310 is the standardattachment for ROTUS standard set R301-IR.
Air motor designed for high-efficiency
Air Cooling System generates no heat for a continuous operation
Light-weight and compact design
Assembled with Speed Control and Forward / Reverse Control Ring
Speed control by Foot Control
To achieve high torque, ROTUS air motor is assembled with micron precision between the vanesand the internal surface of cylinder using NAKANISHI's proprietary techniques. This highperformance air motor with minimal power loss from load fluctuation has excellent performancein its grinding stability. Moreover, the motor with minimal air consumption runs quietly and theenergy-saving mechanism makes it possible to operate with a 0.75KW (1 hp) air compressor.
The motor prevents heat generation and expansion of metal by air cooling system andprovides stable rotation speed.
The motor with attachment IR-310 is only 222g. Its light-weight and well balanced designprovides excellent grinding performance.
Forward/Reverse Rotating Direction Control Ring located at the end of the motor can controlthe motor speed as well.
Fine adjustment of variable speed can be controlled by Foot Control.
Excellent quietness with SilencerBy attaching the silencer to the end of the exhaust air tubing, the motor is operated extremely quiet.
Motor for ROTUS (Pneumatically Driven)
5 10 15 20 25 30
9
8
7
6
5
4
3
2
1
12
11
10
60
50
40
30
20
10
Speed ( x 103 min-1)
Out
put P
ower
(W)
Torq
ue (c
N·m
)
ROTUS IM-300 Performance CurveAir Pressure 0.5MPa
Speed-Torque Characteristics (IM-300)Speed-Output Characteristics (IM-300)Speed-Torque Characteristics (IM-300+RG-01)Speed-Output Characteristics (IM-300+RG-01)
0
HA
ND
GR
IND
ER
247
CAT. No. Model Standard Accessories
1003 IM-300Hose (K-207) : 2 mSilencer (K-209)Pin Spanner (K-233) : 1 pc.
Air Motor with 360˚ Twist-Free Joint MechanismAdopted Twist-Free Joint mechanism between the motor andthe hose has solved the problem of hose twisting.
AIR MOTOR IM-301 (with Twist-Free Joint Mechanism )1004CAT.No.
AIR MOTOR IM-300 (with Chip Air Mechanism)1003CAT.No.
3,000~30,000 min -1
3,000~30,000 min -1
CAT. No. Model Standard Accessories
1004 IM-301Hose (K-206) : 2 mSilencer (K-209)Pin Spanner (K-233) : 1 pc.
96.8
ø22.
8
FWD/REV Rotating Direction Switch Ring
Air Motor with Chip Air MechanismAir motor IM-300 with Chip Air mechanismblows away the cutting dust with clean aircoming through the top end of theattachment. The hand-held cutting workremains cool by the chip air allowing comfortthrough out the working process.(This is only with the attachment IH-300)
97.5
ø22.
8
FWD/REV Rotating Direction Switch Ring
Weight : 130 g excluding hose
Weight : 130 g excluding hose
Lever Type AttachmentCAT. No. Model Standard Accessories
1005 IH-300 Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachSpanner (7 x 5.1) : 1 pc. Pin Spanner (K-233) : 1 pc.
Perfectly designed for powerful and delicatecutting and grinding, and made slim and lightweight for comfortable gripping.Weight : 62 gJust turn the lever to exchange the bur.Spanner is not required to exchange the chuck.Collet Chuck Standard Size : ø3.0 mm (CHH-3.0),
ø2.35 mm (CHH-2.35)Optional Collets : CHH- [][] are shown
LEVER TYPE ATTACHMENT IH-3001005CAT.No.
Ring Type AttachmentCAT. No. Model Standard Accessories
1147 IR-310 Collet Chuck ø3.0 mm (CHH-3.0), ø2.35 mm (CHH-2.35) : 1 pc. eachSpanner (7 x 5.1) : 1 pc. Pin Spanner (K-233) : 1 pc.
RING TYPE ATTACHMENT IR-3101147CAT.No.
Perfectly designed for powerful and delicatecutting and grinding, and made slim and lightweight for comfortable gripping.Weight : 92 gSimple, no wrench bur replacement.Spanner is not required to exchange the chuck.Collet Chuck Standard Size : ø3.0 mm (CHH-3.0),
ø2.35 mm (CHH-2.35)Optional Collets : CHH- [][] are shown
ø14
60
ø13
64
HA
ND
GR
IND
ER
248
The resistance produced by cutting andgrinding is absorbed by a special rubbergrip to eliminate slipping.Chuck is tightened by a Spanner.Weight : 210 gCollet Chuck Standard Size : ø6.0 mm (CHG-6.0)Optional Collets : CHG- [][] are shown
6 mm TORQUE TYPE ATTACHMENT HG-2001016CAT.No.
CAT. No. Model Standard Accessories
1016 HG-200 Collet Chuck ø6.0 mm (CHG-6.0) : 1 pc. Spanner (10 x 10) : 1 pc.Bar Wrench (K-212) : 1 pc. Pin Spanner (K-233) : 1 pc.
ø25
102
6 mm Torque Type Attachment
27,000 min-1 Max. (* 1)
*Please use it together with Speed Reducer.
For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-300S1012
90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø1.6 mm
CAT.No.
Ideal for chamfering and deburring theinside of slit pipe.Minimum Inner Diameter : ø20 mmWeight : 50 gStandard Collet Chuck : ø1.6 mm (K-252)Speed Reduction Ratio : 10/1113
.8
96
ø8.5
70.3
15,000 min-1 Max. (* 1)
*Please use it together with Speed Reducer.
CAT. No. Model Standard Accessories
1012 MFC-300S Collet Chuck ø1.6 mm (K-252) : 1 pc.Chuck Wrench (K-232) : 1 pc. Pin Spanner (K-233) : 1 pc.
For Deep Hole Grinding LONG ATTACHMENT BMH-3001017CAT.No.
This unique slim body makes it ideal forcutting and grinding the bottom surfaceof deep ribs or holes.Weight : 156 gSpanner is not required to exchange the chuck.Collet Chuck Standard Size : ø3.0 mm (CHM-3.0)Optional Collets : CHM- [][] are shown
ø13
120
62.3
Long Attachment for Deep Hole GrindingCAT. No. Model Standard Accessories
1017 BMH-300 Collet Chuck ø3.0 mm (CHM-3.0) : 1 pc.Spanner (7 x 5.1), (6 x 4.5) : 1 pc. each Pin Spanner (K-233) : 1 pc.
HA
ND
GR
IND
ER
249
* 1 : Maximum Allowable Speed, intermittent use.* 2 : Maximum Allowable Speed, continuous use.
* Maximum Allowable Speed, continuous use may change dependingon the material being cut and other application variables.
For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-300M1013
90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø1.6 mm (Very Small Head)
CAT.No.
The smallest 90˚Angle type head issuitable for chamfering and deburringthe inside of the slit pipe.Minimum Inner Diameter : ø13 mmWeight : 47 gStandard Collet Chuck : ø1.6 mm (K-253)Speed Reduction Ratio : 10/11
CAT. No. Model Standard Accessories
1013 MFC-300M Collet Chuck ø1.6 mm (K-253) : 1 pc.Chuck Wrench (K-232) : 1 pc. Pin Spanner (K-233) : 1 pc.
9.5
95
ø6.8
69.4
15,000 min-1 Max. (* 1)
*Please use it together with Speed Reducer.
HA
ND
GR
IND
ER
250
CAT. No. Model Standard Accessories
1006 IC-300Collet Chuck ø3.0 mm (CHC-3.0) : 1 pc.Standard Accessories : 1 set Chuck Wrench (K-231) : 1 pc. Pin Spanner (K-233) : 1 pc.
90º Angle Attachment
90°ANGLE ATTACHMENT IC-3001006CAT.No.
20,000 min-1 Max. (* 2)
*Please use it together with Speed Reducer.
45°ANGLE ATTACHMENT KC-3001014CAT.No.
20,000 min-1 Max. (* 2)
*Please use it together with Speed Reducer.
* 1 : Maximum Allowable Speed, intermittent use.* 2 : Maximum Allowable Speed, continuous use.
* Maximum Allowable Speed, continuous use may change dependingon the material being cut and other application variables.
90˚Angle attachment with ø3.0 mmCollet Chuck. Most suitable forpolishing flat surfaces, corners andinternal surfaces of pipes with paperdisk mounted on rubber pad. Reduction Ratio : 3/4 Weight : 45 g Collet Chuck Standard Size : ø3.0 mm (CHC-3.0)Optional Collets : CHC- [][] are shown
CAT. No. Model Standard Accessories
1014 KC-300Collet Chuck ø3.0 mm (CHC-3.0) : 1 pc.Standard Accessories : 1 set Chuck Wrench (K-231) : 1 pc. Pin Spanner (K-233) : 1 pc.
45º Angle Attachment
Ideal for the work at 45˚angle,especially corners and deep concaves.
se the motor in reverse rotation for clockwiserotation. Speed Reduction Ratio : 3/4 Weight : 45 g Collet Chuck Standard Size : ø3.0 mm (CHC-3.0)Optional Collets : CHC- [][] are shown
Drive Motor & Control Unit
*For the details of above air motor,
Air Motor(IM-301)
t
* For the details of above air motor,
Air Motor(IM-301)
t
9ø12.8
20.1
57.3ø12.8
20.2
Standard Accessories for IC-300 and KC-300
Description CAT. No. Model O.D.
ø10mmø20mmø30mmø11mmø11mmø21mmø21mmø31mmø31mm
Grits Q'ty—— _ 1—— _ 1—— _ 1
Sandpaper Disk
—— # 180 5—— 5—— # 180 5—— 5—— # 180 5—— 5
(Small)(Med)Rubber Pad
HA
ND
GR
IND
ER
251
Rubber PadProduct CAT. No. Model O.D. Grits
64101 —— ø10 mm _
64102 —— ø20 mm _
64103 —— ø30 mm _
Rubber Pad(Small)
Rubber Pad(Med)
Rubber Pad(Large)
Package
1 pc./pack
1 pc./pack
1 pc./pack
Description
Optional Accessories for IC-300 and KC-300
Sandpaper Disk (Paper Type for Metals, Adhesive Back)Product CAT. No. Model O.D. Grits
64131 ——
ø11 mm
# 8064132 —— # 120
6417664177641786417964180
——————————
# 400# 600# 800#1,000#1,500
PackageDescription
64133 —— # 18064134 —— # 24064135 —— # 32064136 —— # 40064137 —— # 60064138 —— # 80064139 —— #1,00064140 —— #1,50064151 ——
ø21 mm
# 8064152 —— # 12064153 —— # 18064154 —— # 24064155 —— # 32064156 —— # 40064157 —— # 60064158 —— # 80064159 —— #1,00064160 —— #1,50064171 ——
ø31 mm
# 8064172 —— # 12064173 —— # 18064174 —— # 24064175 —— # 320
100pcs./pack
Sandpaper Diskfor small pad
Sandpaper Diskfor med. pad
Sandpaper Diskfor large pad
HA
ND
GR
IND
ER
252
Drive Motor & Control Unit
* For the details of above air motor,
Air Motor(IM-301)
ROTUS Air Line Kit(AL-0306) & AFC-45
The Features of MINI-LUSTER ML-8
Reciprocating Stroke (variable) : Approx 0~7,600 times/min.Stroke Range (fixed) : 0.8 mm.Due to pencil type grip, it is most suitable for polishingnarrow grooves, details, etc.Light weight, compact design and minimal vibration keepthe hand free from fatigue for long continuous operation.By using the grindstone holder provided, various tools suchas oil stone, super stone, diamond files, etc. can be used.
CAT. No. Model Stroke Range Standard Accessories
1307 ML-8 0.8mm Standard Accessories : 1 setAllen Wrench (1.5 mm) : 1 pc.
Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment
ø15
85.4
45
120
ø2
0
119
The Features of LUSTER LS-100
The tilt angle of grindstone axis is adjustable.The grinding surface can be set at any angle between 0 and 360˚enabling grinding of bottom, right, left and top surfaces withoutmoving the machine itself.
Stroke Range : 0~6 mm adjustable by allen wrench
eight : 680 gMax. tool shank diameter ø6.4 mm, Screw clamp type.
arious types of attachment tools are provided as standard accessories.
eight : 130 gax. tool shank diameter ø3.2 mm, Screw clamp type.arious attachment tools and holders are provided as standard accessories.
CAT. No. Model Standard Accessories
1302 LS-100Standard Accessories : 1 set
.Lubrication Oil Lubrication Nozzle for LUSTER
Reciprocating Motion Miniature Polisher LUSTER
Drive Motor & Control Unit
* For the details of above air motor,
Air Motor
ROTUS Air Line KitHigh Powerl
reciprocating stroke polisher.
Designed with comfortable rubber-grip
nfrom reciprocating strokes reducing fatigueand allowing long, continuous operation.
Reciprocating Stroke :0~7,600 times/min. Fully adjustable.Ultra-Precision GrinderAll important parts are hardened by heattreatment to provide excellent durability.
HA
ND
GR
IND
ER
253
The Features of SWING-LUSTER SLS-16
CAT. No. Model Standard Accessories
1380 SLS-16 Standard Accessories : 1 setAllen Wrench (1.5 mm) : 1 pc.
Pencil-Type Reciprocating Polishing Finisher SWING-LUSTER Attachment
High speed grinding and polishing operations can beperformed while maintaining the fine and delicatefeeling of hand polishing.Lightweight pencil type design makes it easy to work in tight areas.Ergonomically designed to provide high sensitivity forprecision work.Easily adjustable stroke length allows efficient workon minute areas or large sections .
eight : 127 g Reciprocating Stroke (variable) : 0~7,600 times/mintroke range (variable) : 0~1.6 mmax. tool shank diameter ø5.0 mm, Screw clamp type.
Drive Motor & Control Unit
* For the details of above air motor,
Air Motor(IM-301)
ROTUS Air Line Kit(AL-0306) & AFC-45
87
ø17.
5
Product CAT. No. Package LUSTERLS-100Model
Grindstone Holder
Grindstone HolderVES
Grindstone HolderVEA
Tool Holderwith Spring FVA
Rectangular Pad LKE-2A
Rod for Rectangular PadFBA-2
Angle RodNGA
Diamond GrindstoneDLA4 x 1-100
Grindstone Holder
Ceramic FiberGrindstone(#1,200)
Each product is provided with tool as standard.
MINI-LUSTERML-8
SWING-LUSTERSLS-16
Max. clampable size :Thickness 4.5 x width 11 mm
62505
62751
62525
62526
62527
62814
62951
60737
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.) (1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
(1 pc.)
Tool and standard accessories for LUSTER, MINI-LUSTER, SWING-LUSTER
30 55
11ø3
ø3
45
57
66
16 501.2
4ø3
16
50
Max. clampable size : Thickness 2 x width 13 mm
25 30
ø3.2
30 15
11ø3
Max. clampable size :Thickness 3.5 x width 20 mm
7820
31
ø3Max. clampable size : Thickness 11 x width 13.5 mm
3 pcs./pack
1 pc./pack
1 pc./pack
1 pc./pack
1 pc./pack
1 pc./pack
1 pc./pack
1 pc./pack
3 pcs./pack
2 pcs./pack
62501
62502
8
2
18
[4]
[1]
[2]
[3]
HA
ND
GR
IND
ER
254
Belt runs Approx. 0~705 m/min8 mm, 6 mm and 4 mm width belts are available.The angle of the belt section is fully adjustable.Exchanging the belt is simply done by lever release.Weight : 350 gLight-weight, compact, minimal vibration and a small diameter gripdesign keep the hand free from fatigue for long, continuous operation.When polishing a curved surface, the tension between the front andcentral pulley can be utilized. When polishing a flat surface or agroove, use the flat part of belt.
The Features of FINE BELT SANDER KBS-101
Drive Motor & Control Unit93
ø14
Stroke speed : 25 ~5,000 strokes/min.A wide variety of patterns can be produced byvarying the spring pressure and hammer speed.Light weight, pencil type grip makes the handpiecevery comfortable to hold and easy to use.Adjustable spring pressure.Self lubricating hammer mechanism ensureexcellent durability.
The Features of HA-500
CAT. No. Model Standard Accessories
8060 HA-500Spanner (7 x 5.1) : 1 pc. Bar Wrench (K-212) : 1 pc. Oil and Oil offer machine Hammer Bit (For replacement) : 2 pcs.
Engraving and Ornament Processing Work Hammer Attachment
*For the details of above air motor,
20,000 min-1 Max. (* 1) 16,000 min-1 Max. (* 2) *Please use it together with Speed Reducer.
Hammer Bit to be machined to required shapes (SUS-420, heat treated, approx, HRC50 )Product CAT. No. Package
65301 3 pcs./pack
* 1 : Maximum Allowable Speed, intermittent use.* 2 : Maximum Allowable Speed, continuous use.
* Maximum Allowable Speed, continuous use may change dependingon the material being cut and other application variables.
Air Motor(IM-301)
ROTUS Air Line Kit(AL-0306) & AFC-45
Drive Motor & Control Unit
* For the details of above air motor,
Air Motor(IM-301)
ROTUS Air Line Kit(AL-0306) & AFC-45
Weight : 95 gtroke range : 0.4 mmtroke Spring Pressure : 4.4~7.1N (Ring Adjustment Type)
185
Polishing a curved surface
Polishing a flat surface
CAT. No. Model Standard Accessories
1146 KBS-1018 mm Belt (3 kinds 2 pcs. each) 6 mm Belt (3 kinds 2 pcs. each)4 mm Belt (3 kinds 2 pcs. each)Allen Wrench (3 mm) : 1 pc.
FINE BELT SANDER Attachment
HA
ND
GR
IND
ER
255
Belt for FINE BELT SANDER (Ring Type)
CAT. No.Product Package
649016490264903
64911649126491364914
Grit# 80
Width (mm)
4
Length (mm)
300
# 120# 180
# 80# 120# 180# 240
30 pcs./pack649156491664921
Sand Belt
Zirconia
Diamond(Hard Type)
Diamond(Soft Type)
Felt
64922649236492464925649266492764928649416494264943
# 320
6
8
# 400# 80# 120# 180# 240# 320# 400# 600# 800# 80# 120# 240
649046490564906
# 240# 320# 400
649716497264973
# 808 300# 100
# 12030 pcs./pack
6501165012650146501565017
# 808
8
300
300
# 120# 240# 320# 600
3 pcs./pack
3 pcs./pack
65021650226502365024650286502565026
# 1208
8
300
300
# 180# 240# 320# 400# 600# 800
65027 #1,000
3 pcs./pack
3 pcs./pack
65101 8 300 5 pcs./pack
Description
W
8
8
8
8
Sand Beltfor Wood
HA
ND
GR
IND
ER
256
TORQUE UP 4 TIMES(1/4 Speed Reducer)
Speed Reducer (1/4)CAT. No. Model Standard Accessories
1009 RG-01 Pin Spanner (K-233) : 1 pc.
The speed is reduced to 1/15 but the torque is multiplied by 15 times.Weight : 93 g
Speed Reducer (1/15)CAT. No. Model Standard Accessories
1010 RG-02 Pin Spanner (K-233) : 1 pc.
Extension Joint (Speed 1 : 1)
SPEED REDUCER RG-011009 SPEED REDUCER RG-021010
EXTENSION JOINT CN-011015
CAT.No.
CAT.No.
CAT.No.
TORQUE UP 15 TIMES(1/15 Speed Reducer)
(Speed 1 : 1)
The speed is reduced to 1/4 but the torque is multiplied by 4 times.Weight : 68 g
This is a joint to be connected between a motor and an attachment toextend the total length of the attachment.
eight : 83 g
CAT. No. Model Standard Accessories
1015 CN-01 Pin Spanner (K-233) : 1 pc.
56.1
ø18.
9
41.9
ø18.
9
50.1
ø18.
9
Foot ControlCAT. No. Model Fit to
1064 AFC-45 Air Line Kit (AL-0306)
FOOT CONTROL AFC-451064 SILENCER K-2091060CAT.No.
Ensures a smooth operation and long life by supplying stable,conditioned air to the air motor.Three functions : air filter, regulator, mist lubricator can also beused to adjust motor speed.Lubricator is specially designed to supply oil to the air motor and spindle.Smart design for setting on floor or wall.
Air Line Kit (For ø6 mm Hose · Filter Mesh 5 μm)CAT. No. Model Standard Equipment · Accessories
1545 AL-0306
Air Filter Air RegulatorAir Pressure Gauge LubricatorAir Control Valve (CV-05)Hose for Piping (K-260) : 2 mBracketLubricating Oil (K-211) : 1 pc.
AIR LINE KIT AL-03061545CAT.No.
Designed to depress from any direction.Fine adjustment of speed control is possible.
CAT.No.
By attaching the silencer at the end of exhaust air tubing, theoperation noise is extremely reduced.
26020 20300
170
220
30
120
8-ø7
3070
PF1/4
SilencerCAT. No. Model Description
1060 K-209 Large Silencer (w/Metal Fittings)
* Use air line kit AL-0306, CAT. No.1545 with this foot control.
* This air line kit is designed for use with the AFC-45 foot control,CAT. No.1064.
HA
ND
GR
IND
ER
257
Common Tools for LUSTER, MINI-LUSTER
7820
31
ø3
25 30
ø3.2
ø3
24
3.27.2
45
ø3
ø3
L21.3
L1
CAT. No.Product Description · Model
62505
62501
62502
625086250762506
62951
Grindstone Holder VEAfor (W 13.5 x T 11 mm)
Grindstone Holderfor (W 13 x T 2 mm)
Grindstone Holder VESfor (W 11 x T 4.5 mm)
Holder for Super StoneSH-10 (L1 = 10.2 mm) (L2 = 25.5 mm)SH-6 (L1 = 6 mm) (L2 = 23.4 mm)SH-4 (L1 = 4 mm) (L2 = 22.2 mm)
Grindstone Holderfor (W 20 x T 3.5 mm)
62509Oil Stone Lapping StickHolderfor (W 6 x T 3 mm)
62751 Tool Holder with SpringFVA
62527 Angle RodNGA
62525
62526 Rod for LappingFBA-2
ø11
CAT. No.Product Description · Model6413164132641336413464135641366413764138641396414062551625526255362554625556255662557625586255962560
62840
62814
—— # 80—— # 120—— # 180—— # 240—— # 320—— # 400—— # 600—— # 800—— # 1,000—— # 1,500K-008 # 80K-012 # 120K-018 # 180K-024 # 240K-032 # 320K-040 # 400K-060 # 600K-080 # 800K-100 # 1,000K-150 # 1,500
DLA-1-100
DLA4 x 1-100
18
8
Sandpaper Disk
Sandpaper
30 55
11ø3
30 15
11ø3
66
57
LKE-2A with HingeUse with FBA-28
2
18
15
16
ø14
[4]
[3]
[2]
[1]
Illustration Usage
HA
ND
GR
IND
ER
258
HIGH-TORQUE PENCIL TYPE AIR GRINDER
Straight Type ECOMO : ESP-603
58,000 min-1
With Maneuverable Design for Usability & Safety,Reach Excellent Precision, Upgrade Grinding & Finishing
Straight Type ECOMO : ESP-603R
58,000 min-1 <Reverse Rotation>
90 Angle Type ECOMO : EA90-20
22,000 min-1
45 Angle Type ECOMO : EA45-20
22,000 min-1
HA
ND
GR
IND
ER
259
Competitors' Grinder
30mm
Safety
NotSafe
Easy to bend or break the tool
ON/OFF Ring
"LUBE-RING"
With Small Diameter Carbide Cutter
With Rubberized Abrasive
2. Excellent Precision
Straight Type ECOMO
For grinding, polishing, engraving of finished parts and mold cavities.Excellent performance on a wide range of materials such as resins, ceramics, ferrous, non-ferrous, gem stones and wood.Ergonomically designed for continuous use with maximum confort.
ø3.0mm (Standard Equipment) : NKM6-3.0ø2.35mm : NKM6-2.35ø3.175mm : NKM6-3.175
" NK Micron Chuck System "
NEW
"NK Micron Chuck" is designed with thesame high precision technology as ourmachine spindle collet chuck, eliminatingexcessive runout.(Only for ESP-603 / ESP-603R.)
1. Safety DesignMax. Tool Mounting Depth is 30mmMinimize the overhang of the tool to prevent tobending, breaking and vibration.
6. Easy Operation with the elastomer grip
Deeper chucking area prevents accidentalbending or breaking of tools.
4. Light Weight : 100gReduced weight for prolonged usage.
3. Easy Lubrication
5. High-Power, High-TorqueThe special vane motor enables the low airvolume usage with high power and RPM.
Special Lubricate Oil Mechanism "LUBE-RING" installed.Easy to manually lubricate without airline disconnection.
* Lubricate the provided oil with the one-push volume. An hourly lubrication is advisable.
<Line up >
HA
ND
GR
IND
ER
260
Reverse Rotation Type Grinder is alsoavailable (ESP-603R) Shipment from 2009Motor direction is reverse only (not bi-directional).Exhaust direction is toward the tool.
125
40
ø33.5
Ring Color is Gold
Calculated air pressure and motor speed correlation <ESP-603 / ESP-603R>
Appropriate Air Pressure Air Consumption Motor Speed
0.4MPa
0.5MPa
0.6MPa
110NL / min
140NL / min
170NL / min
50,000 min-1
54,000 min-1
58,000 min-1
ECOMO
Pressure Gauge
Filter Joint
Air Line Kit Body(AL-807)
Oil Drip RateAdjusting ScrewOil Filler
Sight Dome
Regulator Knob
ON-OFF Valve
To Air Compressor
Air Hose
Connector for Air Hose PT1/4
Connectorfor Air Tool
Connector for Air Tool(Seal tape is wrapped)
PT1/4
Use Nakanishi Air line kit # AL-807. (Filter, Regulator, Atomized air / oil lubricator)
Coupler is not provided
Other Features
90˚ ECOMO / 45˚ ECOMO
34
118
ø33.5
ON/OFF RingTurn the ON/OFF Ring to set ON/OFF and to adjust motor speed.
With Cup Wheel With Rubber Pad With Rubberized Abrasive
Eco-Friendly package materialECOMO is packaged in an environ mentalfriendly box.
Piping Connection Diagram
Specifications
Air Consumption : 110~170 NL/minProper Air Pressure : 0.4~0.6 MPa
Air Exhaust : BackwardAir Hose Length : 1.5m
Specifications
Air Consumption : 110~170 NL/minProper Air Pressure : 0.4~0.6 MPa
Air Exhaust : BackwardAir Hose Length : 1.5m
Calculated air pressure and motor speed correlation <EA90-20 / EA45-20>
Appropriate Air Pressure Air Consumption Motor Speed
0.4MPa
0.5MPa
0.6MPa
110NL / min
140NL / min
170NL / min
19,000 min-1
20,500 min-1
22,000 min-1
45 E̊COMO90 E̊COMO
HA
ND
GR
IND
ER
261
ECOMO ESP-603 58,000 min -1
CAT. No. Model Standard Accessories
1127 ESP-603 Collet Chuck ø3.0mm (NKM6-3.0) : 1 pc. Spanner (9 x 9) : 1 pc. Bar Wrench (PCR-30) : 1 pc. Lubricating Oil : 1 pc.
ø17.
2
128
ø17.6
Collet Chuck Standard Size : ø3.0mm (NKM6-3.0)Optional Collets : NKM6-[][]
ø2.35~ø3.175mmeight : 100g (Except hose)
ECOMO ESP-603R 58,000 min -1
CAT. No. Model Standard Accessories
1128 ESP-603R Collet Chuck ø3.0mm (NKM6-3.0) : 1 pc. Spanner (9 x 9) : 1 pc. Bar Wrench (PCR-30) : 1 pc. Lubricating Oil : 1 pc.
ø17.
2
128
ø17.6
Collet Chuck Standard Size : ø3.0mm (NKM6-3.0)Optional Collets : NKM6-[][]
ø2.35~ø3.175mmWeight :100g (Except hose)
<Reverse Rotation>
Ring Color is Gold
Note : When using CARBIDE CUTTERS, with ESP-603Rplease use them for "Left Handed Type".
1127CAT.No.
1128CAT.No.
HA
ND
GR
IND
ER
262
ø33.5
118
34
ø17.6
40
ø33.5
125
ø17.6
ECOMO EA45-20
Angled model housings are aluminum alloy.
ECOMO EA90-20 22,000 min -1
22,000 min -1
Collet Chuck Standard Size : ø3.0mm (CHS-3.0)Optional Collets : CHS- [][] are shown
eight : 170g (Except hose) otor speed : 19,000 - 22,000 rpm
otor speed : 19,000 - 22,000 rpm
CAT. No. Standard Accessories
1129 EA90-20Collet Chuck ø3.0mm (CHS-3.0) : 1 pc. Special Grindstone Axis (NCH-01) : 1 pc.Spanner (8 x 5) : 1 pc. .Lubricating Oil : 1 pc. Rubber Pad (64822) : 1 pc. Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each
Angled model housings are aluminum alloy.Collet Chuck Standard Size : ø3.0mm (CHS-3.0)Optional Collets : CHS- [][] are shown
eight : 170g (Except hose)
CAT. No. Standard Accessories
1130 EA45-20Collet Chuck ø3.0mm (CHS-3.0) : 1 pc. Special Grindstone Axis (NCH-01) : 1 pc.Spanner (8 x 5) : 1 pc. .Lubricating Oil : 1 pc. Rubber Pad (64822) : 1 pc. Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each
d
dd
1129CAT.No.
1130CAT.No.
HA
ND
GR
IND
ER
263
24701
14
ø3.0
ø3
38
50,000 min-1
24705
ø6.3
13
52
40,000 min-1
ø6.3
13
50
40,000 min-1
24709
50,000 min-1
38
24716
14
ø340,000 min-1
50
24719
ø6.3
13
SHANK
ø3.0 40,000 min-1
24724
ø6.3
13
50
50,000 min-1
24721
ø3
13
38
40,000 min-1
ø6.3
13
50
24729
40,000 min-1
50
24714
ø6.3
13
50,000 min-1
38
24711
14
ø3
< Left Handed Carbide Cutters > for Straight Type ECOMO ( Reverse Rotation)
< Grindstone > for 90˚, 45˚ Angle Type ECOMO
14
ø3
38
50,000 min-1
24706
50,000 min-1
ø3
13
24726
38
ø20
12
ø30
13
3.73.4
23,000 min-1
M7 x 0.75 M7 x 0.75
M7 x 0.75
For rough finish processing, high efficiency operation is possible due tothe superiority of its grinding ability and abrasive strength.Abrasive Grain : A
12 pcs. /pack
1 pc. /pack
10 pcs. /pack 5 pcs. /pack
High elasticity rubber cup wheel having both grinding and polishing abilities.Flat and curved surfaces are processed with the soft touch by the highpower of ecomo.Comparing with grinding stone, biting onto the processing surface is lessthat makes the fine adjustment of the coarse on finishing surface possible.
Various kinds of polishing disk can be used attaching on therubber pad.Most suitable for finishing the flat and curved surfaces due tothe use of elastic rubber pad.
# 60# 80# 120# 180# 220# 320
Grit Color Code No.
64856
BrownRedBlueOliveGreenBrown 64822
Code No.
64821Code No.
ø30
23,000 min-1
6
ø20 ø30ø11
23,000 min-1
Standard
HardStandard
# 36# 46# 80
Grit Grade Hardness
648306483164832
Code No. (ø20) Code No. (ø30)
64835648366483764838Hard# 80
Cup Wheel Rubber Cup Wheel Special Rubber Pad for Disk Abrasives
M7 x 0.75 M7 x 0.75
Code No.ModelProduct Inside Diameter : ød
ø2.35
ø3.0
ø3.175
NK Micron Chuck for Straight Type ECOMO
Collet Chuck for 90˚, 45˚ Angle Type ECOMO
Chuck Nut for Straight Type ECOMO
NKM6 Group
Spare Parts
920309209292093
NKM6-2.35
NKM6-3.0
NKM6-3.175
CHN-6
Code No.Description · ModelProduct
Code No.ModelProduct Equipment
.
Air Line Kit (Filter Mesh 5μm)
1032
Code No.ModelProduct Fit to
2104
Code No.ModelProduct Inside Diameter : ød
ø2.35
ø3.0
ø3.175
90592
9059390530
CHS-2.35
CHS-3.0
CHS-3.175
CHS-[][]
2077Air Hose with JointK-281
2066Exhaust Air HoseK-267
1055
1058
Lubricating Oil For ECOMO Series (70cc)K-268
Lubricating Oil (1L) K-202
1042Head CoverCNA-BL
1045Grindstone Axis (for Cup Wheel & Rubber Pad) NCH-01
2067Bar Wrench for Straight Type ECOMOPCR-30
2013Bar Wrench (72mm)K-212
2064Spanner 9 x 9 mm
2012Spanner 8 x 5 mm
11.0d
ø0.8~ø2.9 in 0.1mm increments
23.5d
Use Nakanishi air line kit #AL-807. (Filter, Regulator, Atomized air /oil lubricator)Coupler is not provided
[Piping Connection Diagram]
HA
ND
GR
IND
ER
264
Free From Twisting HoseTo prevent the twisting of hose, 360˚ Twist-Free Joint connectsthe motor and the hose.
To InletAir Hose
Air Supply 3 Pieces Set
Air Line Kit AL-807
IMPULSE
ToCompressor
Silencer Filter
Features
Mounting & Dismounting Cutting ToolInsert the spanner provided into the hole on the spindle andopen or close the chuck with the Chuck Wrench to exchange the cutting tool.
Exchangeable Collet ChuckStandard Size : ø3.0 mm (CHS-3.0)Optional Collets : CHS-[][] are shown in page (7-p5)
The shape of the grinder is specially designed for sensitive fingertouch control toward the top of the cutting tool. The front part ofthe NSP-601 model is made of stainless steel ; the back portion ofaluminum alloy. The exhaust air line hose with silencer keeps thenoise level to a minimum. To prevent twisting of the double linehose, a 360 degree twist-free joint connects the motor and the hose.
IMPULSE NSP-601 60,000 min -11034CAT.No.
60,000 min-1 Durable and quiet high-efficiency air grinder.The IMPULSE Series also offers 45 degree and 90 degree models. Choose the type that best fits yourapplication requirements.
Set-Up Drawing
Excellent SilencerSilencer on the exhaust air hose keeps the grinder very quiet.
Connecting Part To Air Line Kit
The air motor is assembled with a special vane designwhich keeps constant speed even under load providingstable grinding and polishing operation.
The shape of the grinder is designed for sensitive fingertouch control toward the top of the cutting tool.Smooth start is guaranteed.The safety design of clamping the chuck up to 29 mmmaintains stable rotation of the cutting tool.
Use Air Line Kit AL-807 or air supply 3 pieces set. (Air Filter, Air Regulator, Lubricator)
Specifications
Rotating Speed : 60,000 min-1
Air Consumption : 165NL/min Proper Air Pressure : 0.4~0.6MPaHose Length : 1.5 mWeight : 165 gOutput : 70WInlet Air Hose Length : 1.5 mEraser Hose Length : 1.2 m
Screw forPT 1/4 Pipe
Air Filter
Inlet AirCoupling
ULTRA-PRECISION HIGH-TORQUE AIR GRINDER “ IMPULSE”
168
ø23.
9
ø17
CAT. No. Model Standard Accessories
1034 NSP-601 Collet Chuck ø3.0 mm (CHS-3.0) : 1 pc. Spanner (8 x 5) : 1 pc.Bar Wrench (K-212) : 1 pc Hose (K-213) 1.5 m Silencer (K-208) : 1 pc.
HA
ND
GR
IND
ER
265
Angled model housings are all aluminum alloy.Collet ChuckStandard Size : ø3.0 mm (CHS-3.0)Optional Collets : CHS-[][] are shown in page (7-p5)Weight : 190 g
Angled model housings are all aluminum alloy.
IMPULSE NA90-2301036CAT.No.
IMPULSE NA45-230 23,000 min-1
23,000 min-1
1037CAT.No.
Angled model housings are all aluminum alloy.
IMPULSE NA45-4001035CAT.No.
Collet ChuckStandard Size : ø3.0 mm (CHS-3.0)Optional Collets: CHS-[][] are shown in page (7-p5)Weight : 210 g
Collet ChuckStandard Size : ø3.0 mm (CHS-3.0)Optional Collets : CHS-[][] are shown in page (7-p5)Weight : 190 g
40,000 min-1
ø23.
9
161
ø28.6
39.6
163
39.6
Ø23
.9
ø33.5
34
156
ø23.
9
ø33.5
CAT. No. Model Standard Accessories
1035 NA45-400 ollet Chuck ø3.0 mm (CHS-3.0) : 1 pc Spanner (8 x 5) : 1 pc Bar Wrench (K-212) : 1 pc.ose (K-213) : 1.5 Silencer (K-208) : 1 pc.
CAT. No. Model Standard Accessories
1037 NA45-230Collet Chuck ø3.0 mm (CHS-3.0) : 1 pc. Special Grindstone Axis (NCH-01) : 1 pc. Spanner (8 x 5) : 1 pc. Bar Wrench (K-212) : 2 pcs. Allen Wrench (1.5 mm) : 1 pc. Hose (K-213) : 1.5 m Silencer (K-208) : 1 pc. Cup Wheel (64836, 64837) : 1 pc. each Rubber Pad (64822) : 1 pc.Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each
CAT. No. Model Standard Accessories
1036 NA90-230Collet Chuck ø3.0 mm (CHS-3.0) : 1 pc. Special Grindstone Axis (NCH-01) : 1 pc. Spanner (8 x 5) : 1 pc.Bar Wrench (K-212) : 2 pcs. Allen Wrench (1.5 mm) : 1 pc. Hose (K-213) : 1.5 m ilencer (K-208) : 1 pc. Cup Wheel (64836, 64837) : 1 pc. each Rubber Pad (64822) : 1 pc.Sandpaper Disk (Grits #120, 320, 600, 1000) : 2 pcs. each
HA
ND
GR
IND
ER
266
If you replace the Cup Grinding Stone with a ø3.0 mm Collet Chuck, a mounted grindstone can be used.When using a Collet Chuck, the wheel cover isremovable for better visibility if necessary.
*When using a rubber pad, slowdown the rotating speed.
MountedGrindstone
ColletChuckCHS-[][]
Remove Head Cover Grindstone AxisNCH-01
Sandpaper DiskFelt Disk
Cup Wheel
The AL-807 air line kit provides smooth operation to the ECOMO / IMPULSE grinder for long hours of operation. Just connect to the aircompressor for steady air flow and automatic lubrication to the air tool. The AL-807 is compact and light-weight, and features a motor rack andeasy carry handle.
Standard EquipmentCAT. No. Model
1032 AL-807Air Filter Air Regulator Air Pressure GaugeLubricator Air ON-OFF Valve Hose for Piping (K-260) : 2 mLubricating Oil (K-211) : 1 pc.
AIR LINE KIT AL-8071032CAT.No.
[1]
[2]
[3] [7]
[4]
[5]
[6]
[8]
155.5
195
138
Air Line Kit (Filter Mesh 5 μm)
Air Line Kit AL-807— Automatic Lubricating Device
[1] Piping Hose Joint(PT1/4)
[2] Air ON-OFF Valve[3] Air Regulator Knob[4] Air Pressure Gauge[5] Air Filter Check Window[6] Handle[7] Handpiece Holder[8] Motor Hose Joint
(PT1/4)
Easy carrying, spacesaving type can beinstalled any place evenon a wall.
Weight : 2.2 kg Size : 115 mm
When using ECOMO & IMPULSE series,use with the air line kit AL-807 shown below or equivalent air linekit in order to provide proper air pressure and lubrication to the air motor.
* All lubricators offered by NAKANISHI are micro-mist type. They are specially designed to supply about 3%of visual drip rate (about 30 drops/min) into the secondary side (air motor).
“ ECOMO & IMPULSE” AIR LINE KIT & PARTS
The Exchangeable Attachment Chart
Optional Accessories
CAT.No.Product Description Model
648326483764838648366484264844648466484764849
Cup Wheel (12 pcs./pack)
Polishing Sander(5 pcs./pack)
# 80
# 80
# 46
# 80
# 120
# 180
# 240
# 400
# 80
Ø 20
Ø 30
Ø 30
Ø 30
Ø 30
Ø 30
Ø 30
Ø 30
Ø 30
Grit O.D.Standard
Standard
Hard
Hard
CAT.No.Product Description Model
64821
64822
Rubber Pad (5 pcs./pack) (use sandpaper)
Ø 20
Ø 30
Grit O.D.
HA
ND
GR
IND
ER
267
80
80
ECOMO Spare Parts
29
ECOMO2065 K-266Air Hose 1.5m
ledoM.oN .TACtcudorP ot tiFnoitpircseD
23.5d90 ,̊ 45 ̊Angle Type ECOMO
905929053090593
CHS-2.35CHS-3.0CHS-3.175CHS-[][]
ColletChuck
9.0
ø9.8 NKM6 Group2104 CHN-6Chuck Nut
11.0dStraight Type ECOMO
920309209292093
NKM6-2.35NKM6-3.0NKM6-3.175
NKMicronChuck
d : ø2.35mmd : ø3.0mmd : ø3.175mm
d : ø2.35mmd : ø3.0mmd : ø3.175mmø0.8~ø2.9 in0.1mm increments
ECOMO2066 K-267Exhaust Air Hose
ECOMO1045 NCH-01Grindstone Axis (for Cup Wheel &Rubber Pad)
ECOMO1042 CNA-BLHead Cover
ECOMO2064Spanner 9 x 9
ECOMO2012Spanner 8 x 5
ECOMO2067 PCR-30Bar Wrench forStraight Type ECOMO
ECOMO2013 K-212Bar Wrench (72 mm)
ECOMO Series1055 K-268Lubricating Oil forECOMO Series (70cc)
For Air Line Kit AL-8071058 K-202Lubricating Oil (1L)
IMPULSE Spare Parts
29ledoM.oN .TACtcudorP ot tiFnoitpircseD
IMPULSE1045 NCH-01Grindstone Axis (for Cup Wheel &Rubber Pad)
IMPULSE
IMPULSE
IMPULSE
1043
1038
1061
CNA
K-213
K-208
Head Cover
Hose 1.5m
Silencer Small(w/Metal Fittings)
IMPULSE2012Spanner 8 x 5
IMPULSE2013 K-212Bar Wrench (72 mm)
IMPULSEAllen Wrench(1.5 mm)
For Air Line Kit AL-8071057 K-211Lubricating Oil (70cc)
For Air Line Kit AL-8071058 K-202Lubricating Oil (1L)
78
ECOMOAllen Wrench(1.5 mm)
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
272
LAPTRON 35●Japan Patent/No.1128235 ●U.S. Patent/No.4168916
●Swiss Patent/No.629689 ●Germany Patent/No.2814467
• The tip can easily attached and detached.It comes with a diverse lineup of material quality and tip size, and is especially superior in polishing and grinding with superstone.
• It is capable of high-precision, quick fi nish-ing of the rib, slit, oddly shaped holes or any minuite areas. Output adjustments remain simple, and since no heat is generated, it allows safe and comfortable work conditions.
Easily actualizes micron level precisionThe fi ne tip doesn’t generate heat and easily polishes even extremely narrow areas (0.3mm).
• Polishing super-minute areas with ceramic superstone.
• Polishing minute areas after heatsink-ing with a metal bond-diamond tip.
Light and slim handtool measuring 23 Ø in diameterComfortable to hold even by women and highly workable.
HA
ND
GR
IND
ER
273
CONFUGURATION●Power unit●Tip case●Holder●Foot switch●Hand tool●Input cord●Fastening jig●Tip fastening /1set●Attached tips/1set
• ASSORTED STANDARD TIPSComing in a lineup of diverse standard tips for grinding and polishing
aluminum, copper, alloy and even superalloy molds. Tips can be tailored
on request in addition to the standard lineup.
• Metal bond-diamond tips (round)
• Electrode diamond tips
• Metal bond-diamond tips (tapered, 0.5 mm thickness)
• Metal bond-diamond tips (0.7 mm thickness)
• Metal bond-diamond tips (0.5 mm thickness)
• Ruby tips • Bress tips • Wood tips (hard) • Wood tips (soft)
• Tips for chasing • Ceramic-superstone tips (fl at)
• Ceramic-superstone tips (round)
SPECTIFICATIONS
Input : AC100V, 110V, 120V, 200V, 220V, 230V, 240V
50 / 60Hz, 50VA
Output : 15W max, 22KHz 4-stage selection
Dimensions (WxDxH) : 260 X 185 X 110 (mm)
Weight : approx 4kg
LAPTRON 35
HA
ND
GR
IND
ER
274
LAPTRON 55/ 55R●Japan Patent/No.1128235 ●U.S. Patent/No.4168916
●Switzerland Patent No.629689 ●Germany Patent No.2814467
Further Advanced Supersonic Lapping MachineNew Model LAPTRON 55 SERIES!
New circuit applied that enables use in a wide range of work.Work effi ciency drastically increases in various work environments.
HA
ND
GR
IND
ER
275
LAPTRON 55/ 55RProfessional spectifi cation machine for mold lappingWorld standard machine LAPTRON 55 series promises far easier operation.
High power output supersonic lapping machine LAPTRON 55
A variety of tips can be used.
Supersonic high power output 45 W maximum at an amplitude of 45 microns and a frequency of 22000 Hz.Enables comfortable and high quality mold lapping with minimum force. The latest model of LAPTRON Series realizes speedy, high quality and extremely precise work.
• The best tip selectable based on the application. Various types of tip available from precision tip, 0.3 mm thick, to large size tip, 15 mm wide and 150 mm long. • Lap narrow slits (0.5 mm)
(Using SL tip)• Polishing with ceramic stone
HA
ND
GR
IND
ER
276
LAPTRON 55/ 55RLAPTRON 55R equipped with a rotary mechanismThe rotary mechanism, effective on curved surface work, adds to the basic functions of LAPTRON 55.Effi ciency further increased. Futher high quality and extreme preci-sion realized. Able to deal with any complicated shape in a wide range of work.
• Polishing deep ditches (Using diamond electrode tip)
• Mirror fi nish with diamond paste
• Rotary handpiece DC30V, 35000 r.p.m.
Supersonic control circuit key technology applied to this machine is protected by patents in four countries, namely Japan, USA, Germany and Switzerland. The performance is enhanced by our unique know-how.
High quality fi nish easily achieved!!
Far easier operation realized by the new circuit!!
From precision molds to large sized molds!!
Equipped with rotary machanism!!
• Deal with various shapeShape diffi cult to lap using conventional manual work, such as rib, slit, deformed hole, concave bottom surface and precise angles at corners can be achieved with highly accurate lapping.
• Work effciency raised and high precision achievedWork effi ciency drastically raised because the work speed increases fi ve to ten times manual work. Evenbeginners can perform mirror fi nish easily and speedily.
• New circuit applied to restrict tip temperature riseThe new circuit restricts tip temperature rise as much as pos-sible. Specifi cally, thermal breakage of ceramic tip is eliminated.
• Four-stage power output adjustmentHigh power output of 45 W maximum. Appropriate power se-lectable depending on operating conditions through four-stage power adjustment.
• Varying frequency automatically controlledVarying frequency depending on thickness and length of tips automatically traced. Vibration is controlled by the feedback frequency to maintain the optimum lapping condition.
• Deal with every type of moldEvery type of mold, such as plastic, die cast, press, as well as rubber and glass, can be lapped speedily.
• Performance applicable to every materialSpeedy and highly accurate lapping applicable to every mate-rial, from non-ferrous metal to cemented carbide. Particularly excellent in lapping after electric discharge machining.
• Equipped with a high speed, high-torque motorLAPTRON 55R is equipped with a rotary mechanism driven by a high-torque, high-power motor with a maximum speed of 35000 r.p.m. (DC 30V).
• High effi ciency in curved surface workLapping work on round holes, radius surfaces and U-shaped grooves can be performed taster and more easily. Various tips avaliable that can be attached and detached in one motion.
HA
ND
GR
IND
ER
277
LAPTRON 55/ 55R
CONFIGURATION (LAPTRON 55)
Standard tips for LAPTRON 55/55R (sold separately) Tips other than standard products to be manufactured upon request.Refer to the standard tips catalog for detailed information
CONFIGURATION (LAPTRON 55R)
1. Power unit 2. Tip case 3. Hand tool holder 4. Supersonic hand tool 5. Foot switch 6. Fastening jig 7. Tip fastening/ 1set 8. Tips for supersonic/ 1 set
1. Matal bond-diamond tips (large) 2. Matal bond-diamond tips (SL) 3. Matal bond-diamond tips (SL with taper) 4. Matal bond-diamond tips (round)
1. Electroplated diamond tips 2. Wood tips (hard/soft)3. Ceramic stone tips (fl at/round)
1. Power unit 2. Tip case 3. Handpiece holder 4. Hand tool holder 5. Rotary handpiece 6. Foot switch 7. Supersonic hand tool 8. Fastening jig 9. Tip fastening jig/ 1set 10. Tips for supersonic/ 1set 11. Tips for ratary/ 1set
SPECIFICATION LAPTRON 55 LAPTRON 55RInput AC100V,110V,120V,200V,220V,230V,240V,
50/60Hz,120VAAC100V,110V,120V,200V,220V,230V,240V,
50/60Hz,120VA
OutputSupersonic oscillation 45W max. 22KHz,4-stage selection 45W max. 22KHz,4-stage selection
DC Motor DC3~30V . 35000 r.p.m.
Dimension ( WxDxH ) mm 285 x 175 x 175
Weight approx. 4kg approx. 5.6kg
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
282
Orbital SanderOrbital Sander
U62Pad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: Orbital Sander: 72 x 106 mm.: 3 mm.: 8,500 rpm.: 340 l/min: 165 mm.: 70 mm.: 0.74 kg.
U71Pad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: Tip Sander: 40 x 86 mm.: 3 mm.: 10,000 rpm.: 280 l/min: 249 mm.: 90 mm.: 0.73 kg.
U62
U71
No.4478Velcro Pad (4holes)71mmW.x106mmL.x10mmT.
No.5536Oil-removal Buffer75mmW.x110mmL.x10mmT.
No.7020Soft Edge Pad40mmW.x86mmL.x10mmT.
No.5539Long Pad32mmW.x123mmL.x10mmT.
No.5535Cushion Pad (Base for 5536)71mmW.x106mmL.x5mmT.
No.7021Hard Edge Pad40mmW.x86mmL.x10mmT.
Grinder & LapperGrinder & Lapper
U-102GLDice SizeMax. SpeedAir ConsumeLengthHeightNet WeightAdaptor
: Mini Angle grinder: 25, 58 mm.: 22,000 rpm.: 400 l/min: 135 mm.: 68 mm.: 0.53 kg.: Shank M6
U-102CLDice SizeMax. SpeedAir ConsumeLengthHeightNet WeightAdaptor
: Mini Angle grinder: 25, 55 mm.: 22,000 rpm.: 400 l/min: 135 mm.: 80 mm.: 0.5 kg.: Shank 6 mm
U-102GL
U-102CL
6 mm.
M6
Quick changePad O 1”
Quick changePad O 1”
Velcro Pad O50 mm Velcro Pad O70 mm
Quick changePad O 2”
Quick changePad O 2”
Shank M6
Shank 6mmNon-Wooven
Minidice 2”
(T-001)
(MX-6D)
(MX-6)
Total Tool
HA
ND
GR
IND
ER
283
U-104GRDice SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: 4” Dice Grinder: 100 mm. (4”): 12,000 rpm.: 680 l/min: 205 mm.: 92 mm.: 1.35 kg.
U-AK07Shank SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Turbo Lapper: 3 mm.: 35,000 rpm.: 46 l/min: 180 mm.: 28 mm.: 0.19 kg.
U104GR
Grinder & LapperGrinder & Lapper
Double ActionDouble Action
U-51Pad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: 1.2” Mini Double Action: 31 mm.: 3 mm.: 8,500 rpm.: 140 l/min: 142 mm.: 72 mm.: 0.48 kg.
U-51
U-52Pad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: Mini Double Sander: 45, 72 mm.: 3 mm.: 10,000 rpm.: 280 l/min: 198 mm.: 95 mm.: 0.73 kg.
U-52
No.4263Glue-on Disc O30mmx5mm T.
No.4259Velcro Disc O30mmx5mm T.
No.4276Velcro Pad Base O30mmx2.5mm T.
No.4274Velcro Hard Disc O30mmx7mm T.
No.4275Velcro Soft Disc O30mmx7mm T.
No.5507Velcro Soft Pad O40mmx10mm T.
No.5506Velcro Soft Pad O72mmx10mm T.
No.5544Velcro Pad O72mmx10mm T.
No.5510Thick Buffer O80mmx15mm T.
No.5511Buffering Disc O80mmx5mm T.
No.5508Velcro Pad O45mmx10mm T.
No.5513Buffering Disc O50mmx5mm T.
No.5906Urethane Buffer (fine) O50mmx20mm T.O40mmx100mm Tmm .
N 5544
O45mmx10mm Tmm T.
No.5510
O50mmx5mmm T.m
No.5N 5555555551511
O50mmx20mm T.
O72mmx100mm Tm .
LHN
No.5512Urethane Buffer (fine) O80mmx20mm T.
U-AK07Stroke 0.7 mm.
1). HolderW3 2). Holder O 3
3). HolderW7 (STRAUSS)(XEBEC)
U-AK07
(DR-AR06)
Total Tool
HA
ND
GR
IND
ER
284
Double ActionDouble Action
U-55Pad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: Double Action Sander: 123 mm.: 5 mm.: 10,000 rpm.: 380 l/min: 175 mm.: 91 mm.: 0.9 kg.
U-55, U-556
O 5”
U-556Pad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: Double Action Sander: 123 mm.: 6 mm.: 11,000 rpm.: 400 l/min: 265 mm.: 120 mm.: 1.7 kg.
No.5504Glue-on Soft Pad O123mmx8mm T.
No.5500Velcro Pad O123mmx10mm T.
No.5502Glue-on Pad O123mmx10mm T.
No.5514Glue-on Pad O150mmx30mm T.xO30mm holeO123mmx10mm T.
U-55DPad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: 5” Double Action Sander: 123 mm.: 5 mm.: 8,500 rpm.: 380 l/min: 225 mm.: 91 mm.: 0.96 kg.
U-55D
No.5501Velcro Pad “D”O 123mmx10mm T.
No.5503Glue-on Pad “D”O 123mmx10mm T.
No.5519Cushion BaseO 123mmx10mm T.O 123mmx10mm T.O 123mmx10mm O 123mmx10mm T
No.5500Velcro Pad O123mmx10mm T.
No.5514Glue-on Pad O150mmx30mm T.xO30mm hole
U-55PPad SizeOrbit TireMax. SpeedAir ConsumeLengthHeightNet Weight
: Wax Polisher: O 123 mm.: 5 mm.: 8,500 rpm.: 340 l/min: 172 mm.: 91 mm.: 0.92 kg.
U-55P
Dust extration
O 5”
Total Tool
HA
ND
GR
IND
ER
285
PolishersPolishers
Die GrindersDie Grinders
U-83HPPad SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Mini Angle polisher: 72 mm.: 3,500 rpm.: 380 l/min: 190 mm.: 95 mm.: 0.75 kg.
U-83HP
U-85VPad SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Vertical Sander/Polisher: 123 mm.: 3,000 rpm.: 450 l/min: 195 mm.: 125 mm.: 1.2 kg.
U-85V
No.5547“B” PadO123mmx15mm T.
No.5514“B” PadO150mmx30mm T.xO30mm hole
No.5520BufferO110mmx15mm T.xO10mm hole
No.5538Urethane Buffer (fine)O110mmx20mm T.xO10mm hole
No.5550“B” PadO98mmx15mm T.
No.5523“B” PadO92mmx15mm T.
No.5904Buffering DiscO150mmx15mm T.
No.5903Buffer O150mm
No.5506Velcro Soft PadO72mmx10mm T.
No.5544Velcro PadO72mmx10mm T.
No.5511Buffering DiscO80mmx5mm T.
No.5512Urethane Buffer (fine)O80mmx20mm T.
No.5510Thick BufferO80mmx15mm T.
U-1361Collet SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Micro Grinder: 3 mm.: 60,000 rpm.: 130 l/min: 155 mm.: 16 mm.: 0.24 kg.
U-1635Collet SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Pencil Grinder: 3, 6 mm.: 35,000 rpm.: 150 l/min: 143 mm.: 26 mm.: 0.35 kg.
No
O72mmx10mm T.
N
O123mmx15mm mm T.
No 5514
Total Tool
HA
ND
GR
IND
ER
286
Belt SanderBelt Sander
U-1625Collet SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Heavy duty Die grinder: 6 mm.: 25,000 rpm.: 300 l/min: 164 mm.: 37 mm.: 0.57 kg.
Die GrindersDie Grinders
U-1625RL
Collet SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Heavy Duty Long Die grinder: 6 mm.: 25,000 rpm.: 300 l/min: 330 mm.: 37 mm.: 0.92 kg.
U-1625RCollet SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Heavy duty Die grinder: 6 mm.: 25,000 rpm.: 300 l/min: 164 mm.: 37 mm.: 0.57 kg.
U-113Belt SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Belt Sander: 3,10,18 X 330 mm.: 18,000 rpm.: 1,100 m/min: 283 mm.: 36 mm.: 0.75 kg.
U-112SBelt SizeMax. SpeedAir ConsumeLengthHeightNet Weight
: Belt Sander: 10 X 330 mm.: 18,000 rpm.: 450 m/min: 275 mm.: 53 mm.: 0.8 kg.
(3x330mm, 10x330mm, 18x330 mm)
NR11
Contact Arm is easily replaceable by a screwdriver.
Arm B : 3mm x 330mm Arm D : 18mm x 330mmArm C : 10/12mm x 330mm(large contact wheel)
Non-Wooven
18x330 mm
10x330 mm
10x330 mm3x330 mm
(TS)
(DAIWA) (MA-FORD)
(Blue Diamond)
U-1Belt SMax. SpAir ConsLengthHeightN
Total Tool
HA
ND
GR
IND
ER
287
Belt SanderBelt Sander
RMB-IIBelt SizeRoller SizeWheel SpeedBelt SpeedAir ConsumeLengthHeightNet Weight
: Belt Sander: 60 X 260 mm.: O 50 X 60 mm.: 6,500 rpm.: 1,000 m/min: 500 l/min.: 170 mm.: 115 mm.: 1.38 kg.
HMB-EBelt SizeRoller SizeWheel SpeedBelt SpeedAir ConsumeLengthHeightNet Weight
: Belt Sander: 60 X 260 mm.: O 50 X 60 mm.: 6,500 rpm.: 1,000 m/min: 500 l/min.: 170 mm.: 115 mm.: 1.38 kg.
H-M-S
(#300~#600) (#400~#600)
B
(#700~#800)
HAL Wheel
(Contact Wheel)
(Mirror Finishing)
Hairline
Grinding Stone
Non-Ferrous Metal, Aluminum,Die-Casting
“KILGIA” Belt
HAL Wheel
#80
Grit #46, #60, #120
#120, #320
Grain Z (#24~#120)
Grain WA (#80~#600)
Grain A (#800~#1000)#200, #3000
#80
#320
ST-Dia CrossGrass Polish PRO
SF(#2000)
C(#1000)
#400 #600
#320
#240, #400, #600GC
#150 #240 #320
#80 #120 #240 #4003 6 10 12
S
Saizal Lime #400
Green Lime #400 D-24 #800
HL (O 60x50mm) HLStandard-type SM-type
(#80)
(Grit #80) (Grit #80)C
(Grit #320) (Grit #150)M
(Grit #600) (Grit #600)
#60#80#150#320#600#1000#2000
C1C3C6A12A16A19
#60#80#150#320#400#600
XCCMF
VFSF
A23
SF
(#180)
(#320)
Total Tool
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
291
Obital SanderObital Sander
Air Filer MachineAir Filer Machine
Flap Brush Hand MachineFlap Brush Hand Machine
Free Speed
Orbit Diamer Inch (mm)
Spindle Thread
Pad Size Inch (mm)
Air Inlet (NPT)
Hose Size ID Inch (mm)
Average AirConsumption CFM (L/Min)
Length Inch (mm)
Hight Inch (mm)
Weight Lbs (Kg)
Noise Level dB (A)
5” Random orbital Sander
12,000 RPM
3/16“ (5)
5/16”-24
5” (125)
4” (113)
3/8” (10)
3 (85)
8-3/8” (213)
4 (104)
1.7 (0.78)
84
JM-SM65-5137A
Stroke Speed(cycles/min)
Max Shank dia.of points
Stroke Length (mm)
Hose Size (ID)
Air Pressure (PSI)
Air Consumption (CFM)
Length Inch
Weight Lbs (Kg)
Air Filer
3,700 RPM
1/4”
9 mm
3/8”
90
8.5
7”
2-1/5
JM-SG0825
Revolution
Power
Votatage
Wheel size
Non woven Flap Brush
900-2,500 rpm.(7 steps adjustment)
1600 W
220-240 V50-60 Hz 7.3 A
120 x 100 mm
JM-PT1600
EH-6133ASUBExhaust Hose Assembly (Option)
EH-6133ASUBExhaust Hose Assembly (Option)
1.1 Non-wovenFlap Brush
1.2 Non-wovenCloth Flap Brush
2. Non-woven Convolute wheel Brush (CVW)
3. Non-woven Polishing wheel Brush (UTW)
1 Non-woven Flap Brush
Total Tool
HA
ND
GR
IND
ER
292
Die Grinder 6mmDie Grinder 6mm
Safety Lever Comfort Grip Swivel Air Inlet& Silencer
Swivel Air Inlet& Silencer
Side Exhaust - Rotatable
- 0.25 HP- Rubber grip
- Requlator outop0.25 HP
0.25 HP - 22,000 RP- 0.5 HP
- 32,000 RPM- 0.5 HP- Steel Motor Housing
- 35,000 RPM- 0.4 HP- Low Noise
Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch
Weight Lbs (Kg)
Noise Level dB (A)
Die Grinder
22,000 RPM
1/4”(6 mm)
1/4”
3/8” (10)
4 (113)
6-3/4”
1-1/8
90
JM-SM512
Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch
Weight Lbs (Kg)
Noise Level dB (A)
1/4” Mini Die Grinder
25,000 RPM
1/4”(6)
1/4”
3/8” (10)
4 (113)
4-3/4”
1
90
JM-SM552
Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch
Weight Lbs (Kg)
Noise Level dB (A)
1/4” Mini Die Grinder
25,000 RPM
1/4”(6) or 1/8” (3)
1/4”
3/8” (10)
4 (113)
6-1/8 (156)
0.9 (0.4)
77
JM-SM53-5227
Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch
Weight Lbs (Kg)
Noise Level dB (A)
1/4” Air Die Grinder
22,000 RPM
1/4”(6) or 1/8” (3)
1/4”
3/8” (10)
4 (113)
6-11/16 (170)
1.2 (0.5)
83
JM-SM572P
Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch (mm)
Weight Lbs (Kg)
Horse Power HP(Kw)
Industrial Die Grinder
32,000 RPM
1/4”(6)
1/4”
3/8” (10)
4 (113)
12-1/2” (317.5)
2-9/10 (1.3)
0.5 (0.37)
JM-SM53-5530Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Hose Length Inch(mm)
Length Inch (mm)
Weight Lbs (Kg)
Horse Power HP(Kw)
Industrial Die Grinder
35,000 RPM
1/4”(6)
1/4”
3/8” (10)
4 (113)
29.5 (750)
7.5 (200)
1.3 (0.57)
0.4 (0.3)
JM-SM53-5522
Total Tool
HA
ND
GR
IND
ER
293
Die Grinder 3mmDie Grinder 3mm
Angle GrinderAngle Grinder
Belt SanderBelt Sander
Free Speed
Collet Size (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch
Weight Lbs (Kg)
Noise Level dB (A)
Micro Die Grinder
54,000 RPM
1/8”(3)
1/4”
(5mm)
4 (113)
5-1/4
1/4
90
JM-SM516
Free Speed
Grinding Wheel Size Inch (mm)
Spindle Thread
Air Inlet (NPT)
Hose Size ID Inch (mm)
Average AirConsumption CFM (L/Min)
Length Inch (mm)
Weight Lbs (Kg)
Noise Level dB (A)
Disc 4” Non stop
12,000
4” (100)
3/8”-24
1/4”
3/8 (10)
4 (113)
9-3/8 (238)
4.4 (2)
83
JM-SM5B-6410
Free Speed
Belt SizeInch (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch (mm)
Weight Lbs (Kg)
Noise Level dB (A)
20mm Belt Sander
16,000 RPM
3/4” (20)W x 20-1/2” (520)L
1/4”
3/8” (10)
4 (113)
15-9/16 (395)
3.5 (1.6)
80
JM-SM6T-6200
Safety Lever Comfort Grip Swivel Air Inlet& Silencer
Free Speed
Belt SizeInch (mm)
Air Inlet (NPT)
Hose Size IDInch (mm)
Average AirConsumption CFM (L/Min)
Length Inch (mm)
Weight Lbs (Kg)
Noise Level dB (A)
10mm Belt Sander
18,000 RPM
3/8” (10)W x 13” (330)L
1/4”
3/8” (10)
4 (113)
12-11/16 (323)
2 (0.9)
80
JM-SM6W-6100
- Belt 20x520- Sanding Tracking
Adjustment
- Belt 10x330- Sanding Tracking
Adjustment
Total Tool
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
HA
ND
GR
IND
ER
297
Work Piece Side
Direction Of The Travel
ON/OFF-Switch
Cutters
Tips
Side Handle
Plate
Roller
SPECIFICATIONSModel : CR-1 (Standard)
Nominal Chamfering SizeMinimum Work Piece ThicknessMachine Minimum RadiusPower SupplyMotorFull Load Rotation CurrentNo Load Rotation SpeedCutterTipTool DimensionsMachine Weight
R3 (C2,and C1 Chamfering are also available)6.0mmR 12.5220V, 50/60HZ, 72W, and Single PhaseSeries Wound, and Commutator Motor3.7A9000 min-12-tips/cutter (Clockwise)2 Cemented Carbide Tips287 x 120 x 1362.6 kgs. (excluding the code)
Note : C1 and C2 Chamfering are also possible by changing a roller and tips supplied as optional accessories
1 R/C chamfering foe the curved and straight edge of the steel plate, hole circle edge,desk edge, inside/outside edge of pipe,etc, are available2 R3 and C1,C2 chamfering are available by replacing each exclusive tips,cutter, and roller. (OPTIONS)3 Carbide insert each with 8 cutting edges. Carbide insert has cutting edges both the face and the back
Hard chamfering (Electric Driven)
2R . 3R . C1 . C2
Note : Standard set : 3R chamfering If you need 2R and C2, C1 chamfering you must change both Tips and roller
R C
HA
ND
GR
IND
ER
298
Chamfering availableMin.chamfering thicknessMin.chamfered radiusCutter to be usedTips to be usedWorking pressure rangeAir consumptionWeight
R3 (Options:2R and C1, C2)9mmR173-blade cutterCemented Carbide tips(3 pieces)0.5 ~ 0.62M pa0.45m / min3.2kg
3
Main Specifications
Great works for chamfering steel-platesfor bridges and shipbuilding
Portable Beveller
Handing Chips for CR-18 & MArX-M
NMV-2R-SMTO Solid M type 8 corners
8 corners
8 corners
8 corners
Solid M type
Cermet
Solid M type
NMV-3R-SMTO-H*
NMF-C-SGSO
NMV-C-SMTO-H
Chip diagram Model number Marerial Number of corners
R an
e tips(3 pieces)
ks forks forfor bfor b
nd C1, C2)
ps(3 pieces)
Great workGreat work
Hard chamfering (Pneumatic Driven)
*NMV-3R-SMTO-H (standard chip) others are optional