Hampton Dream Kitchen Series

8
Hampton dream kitchen series The Design Confidential Www.thedesignconfidential.com

description

This publication describes how to build the doors and drawers for the units covered in the Dream Kitchen Series. The Hampton Series covers a Cape Cod style of doors and drawers and allows the builder to consturct without needing a table saw or using specialized skills. Budget Friendly and stylish, this collection is sure to please.

Transcript of Hampton Dream Kitchen Series

Page 1: Hampton Dream Kitchen Series

Hampton dream kitchen series

The Design Confidential Www.thedesignconfidential.com

Page 2: Hampton Dream Kitchen Series

Hampton dream kitchen series

Tape Measure

Square

Sander

Drill

Saw Kreg Jig

Wood:

1/2” plyxood

1w3’s in varying lengths

1w2’s in varying lengths

1 1/4" Pocket Hole Screws 1” Pocket Hole Screxs 5/8” screxs 1 1/4” screxs 1 1/4” finish nails Wood Glue

Wood Filler

Sandpaper

Finishing Supplies

Www.thedesignconfidential.com

Page 3: Hampton Dream Kitchen Series

The Design Confidential

Using your pocket hole system set for 3/4” stock, join your rails and stiles. Place your pocket holes in the rails and use 1 1/4” pocket hole screxs to fasten. Attach your panel inserts using your pocket hole system set for 1/2” stock and fasten on all sides of your insert. The panel inserts will sit flush with the frame on the back side of the door, and will be recessed by 1/4” on the front. This door is an overlay door and xill overhang your cabinet opening by 3/8” on all sides. Purchase overlay hinges to attach, and door pulls of your choice.

2 - 1x3 at 23 1/4" (stiles)

3 - 1x3 at 10 3/4" (rails) 2 - 1/2” ply at 10 3/4” w 7 7/8” (panel Inserts)

Www.thedesignconfidential.com

Base cabinet door

Step 1: Step 2:

Page 4: Hampton Dream Kitchen Series

2 - 1w3 at 4 3/4” (stiles) 2 - 1w2 at 10 3/4” (rails) 1 - 1/2” plyxood at 1 3/4” w 10 3/4” (panel insert)

Www.thedesignconfidential.com

The drawer face will attach to the drawer front of your drawer box, because of this you can actually create a matching face using glue and screws from the inside. You don’t have to xorry about pocket holes, or creating the frame and instead can secure each piece after your glue has set using 1 1/4” screxs for the frame pieces and 5/8” screx for the panel insert.

Base cabinet with Hampton door and drawer

Base cabinet Drawer

Page 5: Hampton Dream Kitchen Series

Measurements:

.

Www.thedesignconfidential.com

Upper wall cabinet door

this will be constructed in the same manner outlined for the base cabinet door

pantry cabinet door This will be constructed in the same manner outlined for the base cabinet door. You will need 4 of these for the original pantry in the dream kitchen series

Page 6: Hampton Dream Kitchen Series

Www.thedesignconfidential.com

.

Under sink double door

.

Under sink false drawer front

These will be constructed in the same manner outlined for the base cabinet door,

This will be constructed in the same manner outlined for the base cabinet door, and will nailed to outside of the drawer opening

Measurements:

Page 7: Hampton Dream Kitchen Series

The Design Confidential Www.thedesignconfidential.com

Hampton dream kitchen series

Fill any Holes, Sand, and Finish as desired.

Page 8: Hampton Dream Kitchen Series

The Design Confidential

Hampton dream kitchen series

Disclaimer:

Www.thedesignconfidential.com

For questions or comments, please visit my site:

Disclaimer: Some rights reserved. The information provided herein is intended for PERSONAL AND PRIVATE use only. Plans from this publication are not to be used for commercial purposes, REPREINTED, or republished without the express written consent of the publisher, Rayan Turner. All plans, materials lists, processes and graphics are considered to be the sole property of rayan turner, and is FOR THE GENERAL PURPOSE OF DOCUMENTING AND SHARING her PERSONAL EXPERIENCES, CREATIVE ENDEAVORS, AND INSPIRATION WITH THOSE INDIVIDUALS WHO SHARE this COMMON INTEREST AND ARE OF A LIKE-MIND, Any information is OFFERED SOLEY FOR THE ENJOYMENT AND ENTERTAINMENT OF SAID INDIIVIDUALS, Please be advised that any persons electing to build a plan shared by the publisher, do so at their own risk, and are thereby assuming full and complete responsibility for their safety and the integrity or stability of the piece. Prior to building, all individuals should understand basic carpentry concepts, procedures, and techniques to the extent they have the knowledge and foresight to recognize a possible inaccuracy, that may compromise the integrity or stability of a project, Accordingly they should have the ability to troubleshoot and modify plans as needed, and according to best building practices, to ensure the finished product is safe, stable, and well made. THE INFORMATION CONTAINED HEREIN should NOT TO BE construed as indicating a claim of expertise, or advise-ment, and that any information is subject to change or be modified at any point, for any reason. Changes made to a publication may include, but not be limited to, a change in readily available materials, new technologies, or any other factor that may alter the method of construction, the publisher wishes to feature. The publisher’s intent is to provide consistently accurate plans, depicting one possible building process, for a particular project, and for which there may be many alternative methods of construction. The publisher strives to provide well detailed descriptions, that are properly outlined, with accompanying graphics, and helpful personal insights throughout. however, there can be no guarantee of accuracy for any plan as Not every plan published, has been built and tested, Please contact the publisher immediately, if you should come across an error or inaccuracy so that It can remedied. you are building at your own risk, and the commencement of a project shall constitute and imply your express acceptance and agreement to indemnify and hold harmless, rayan turner and the design confidential, in the unfortunate event that you experience any form of loss, injury, or inconvenience, relating to any of the publisher’s content.