HAMMERS Hammers - FWB
Transcript of HAMMERS Hammers - FWB
THOREX HAMMERS Thorex hammers have metal heads with screw-in faceswhich can be replaced by hand.
HAMMERSH
am
me
rs2
Copper Hammerl Extra-heavy head, fitted with pure electrolytic
copper facesl For heavy duty hammering where safe blows
of maximum weight & impact are required.
SizeApproxWeight
lbs
Diameter ofFaces
In mm
FWB Code
A 1 1 25 042MXA1 2 11/4 32 042MXD2 3 11/2 38 042MXG3 4 13/4 44 042MYB4 7 2 50 042MYE4L 73/4 2 50 -5 14 23/4 70 042MYH
Copper & Rawhide Hammerl Dual-purpose hammer for assembly work l One face of pure copper for safe, high-impact
blowl One face of Buffalo rawhide for a firm,
resilient blow
SizeApproxWeight
lbs
Diameter ofFaces
In mm
FWB Code
A 7/8 1 25 042MXC1 11/2 11/4 32 042MXF2 21/2 11/2 38 042MYA3 31/2 13/4 44 042MYD4 51/2 2 50 042MYG5 111/2 23/4 70 042MZB
Rawhide Hammerl Dual-purpose hammer for assembly workl Both faces are compressed water-buffalorawhide and treated to ensure uniform quality and maximum durability
SizeApproxWeight
lbs
Diameter ofFaces
In mm
FWB Code
A 3/4 1 25 042MXB1 11/2 11/4 32 042MXE2 2 11/2 38 042MXH3 27/8 13/4 44 042MYC4 41/2 2 50 042MYF5 71/4 23/4 70 -
Plastic Hammerl Fitted with two red plastic faces of medium
hardness, for light hammering applications and the assembly of precision parts.
HandleApproxWeight
lbs
Diameter ofFaces
In mm
FWB Code
Wood 1/4 3/4 19 042NNAWood 1/2 1 25 042NNBPlastic 1 11/4 32 042NNCPlastic 11/2 11/2 38 042NNDPlastic 2 1 3/4 44 042NNEPlastic 2 3/4 2 50 042NNF
THOR SOFT FACED HAMMERS Hammers in this range have malleable iron heads and oval handles (hickory in larger sizes)
HandleApproxWeight
lbs
Diameter ofFaces
In mm
FWBCode
Wood 1/2 1 25 042NPBPlastic 1 11/4 32 042NPCPlastic 11/2 11/2 38 042NPDPlastic 2 13/4 44 042NPEPlastic 23/4 2 50 042NPFWood 51/2 21/2 63 042NPH
THOR SOFT-IMPACTHAMMER
Rubber Malletl Semi-hard black rubber gives gentle but
firm blow with little reboundl For general industrial usel Self-locking handle.
Also available in: White
Sizemm
Weightg
FWBCode
40 x 80 150 042NQM54 x 90 325 042NQN*64 x 113 525 042NQO*74 x 127 750 042NQP*90 x 139 1050 042NQQ*
* Also available with fibreglass handle
Also Available:Replacement Faces & Other Thor Hammers
In combinations of Copper, Aluminium, Plastic, Nylon, Hardwood & Lead
Nylon Hammerl Special white nylon faces, with shoulder for
extra strengthl Serrations prevent loosening.
3H
am
me
rs
HAMMERS / HANDLES, SHAFTS & WEDGES
HAMMERS A wide range of Caldwell hammers are now available from FWB. Suitable for many applications.
Carpenter’s Claw Hammerl Polished head & hickory handle
20oz - 042MPB
Engineer’s Ball Pein Hammerl Hickory handle
1lb - 042MQD 11/2lb - 042MQF2lb - 042MQH 21/2lb - 042MRA
Mason’s Club Hammerl Hickory handle
21/2lb - 042MRE 4lb - 042MRG
Powastrike Club Hammerl Non-slip moulded handlel Unique nylon core head ensures that
hammers don’t lose their headl Fibreglass core
4lb - 042MRN
Powastrike Sledge Hammerl Non-slip moulded handlel Unique nylon core head ensures that
hammers don’t lose their headl Fibreglass core
7lb - 042MRR 10lb - 042MRT14lb - 042MSA
Double Faced Sledge Hammerl Hickory handle
4lb - 042MSA 7lb - 042MSB10lb - 042MSC 14lb - 042MSD
Scutch Chisel1” - 042MVF
Scutch Comb1” - 042MVD
Pick Handle36” - 042MTG
Sledge Hammer Shafts30” - 042MTE 36” - 042MTF
Hammer Shafts30” - 042MTB 36” - 042MTC
Hammer WedgesNo.1 - 042MUE No.2 - 042MUF No.3 - 042MUG No.4 - 042MUHNo.5 - 042MVA
Also Available:Other Shafts - Contact your local FWB for more information.
HAMMERSH
am
me
rs4
HAMMERS
FatMax® XLTM Curve Claw Hammer l One piece forged head for better balancel Patented turning fork design to reduce harmful vibrations that
can cause wrist and arm injuriesl New innovative inner grip layer to reduce fatigue and improve
gripl Magnetic nail starter
20oz (5-51-164) - 017CFP
FatMax® Anti-Vibe Ball Pein Hammerl One piece head and shaft with anti-vibration turning fork for
impact dampeningl Practical, flexible handle gives optimum comfort and gripl Also available: 8, 12 & 16oz
24oz - 017CGM 32oz - 017CGN
3lb Anti-VibeTM Drilling Hammerl For use in confined spacesl Patented Anti-VibeTM technology reduces vibration transmitted towrist and elbow
l Wide face for striking chisels and punches
3lb Anti-VibeTM Engineering Hammerl Sledge hammer for striking wood, metal, concrete or stonel Patented Anti-VibeTM technology reduces vibration transmitted towrist and elbow
l Longer handle provides a greater swing arc
14oz Anti-VibeTM Drywall Hammerl Specially designed for the installation of drywall/plasterboardl Ideal for removing old material and marking cut-outs required forelectrical outlets and switches
l Patented Anti-VibeTM technology reduces vibration transmitted towrist and elbow
l Offset striking face to facilitate overhead working
20oz Anti-VibeTM Brick Hammerl Cutting hammer for cutting brick, masonry tile and concrete blockl The blade is designed to score materials before striking for an
even cutl Patented Anti-VibeTM technology reduces vibration transmitted towrist and elbow
017CGB
Carpenters Hatchetl Dual function hammer for cutting wood and driving stakes or
un-hardened nailsl Suitable for a wide range of trades including carpentry, framingand roofing
l Patented Anti-VibeTM technology reduces vibration transmitted towrist and elbow
Curved Claw 1-Piece Anti-VibeTM Hammerl Rim tempered striking face prevents chippingl Patented Anti-VibeTM technology reduces vibration transmitted towrist and elbow
20oz - 017BHFE
Graphite Handle Club Hammerl Full length graphite core shaft for maximum strength and balancel Fully hardened tempered steel head for long lifel 44 & 52oz available
Hammers
FatMax® XLTM
Curve ClawHammer
3lb Anti-VibeTM
Drilling Hammer
FatMax® Anti-VibeBall Pein Hammer
14oz Anti-VibeTM
Drywall Hammer
3lb Anti-VibeTM
EngineeringHammer
20oz Anti-VibeTM
Brick Hammer
CarpentersHatchet
Curved Claw1-Piece Anti-VibeTM
Hammer
Graphite Handle Club Hammer
5H
am
me
rs
HAMMERS & SOLID FORGED HAMMERS
Hammers
SOLID FORGED HAMMERS
Solid Forged Hammers
Curved Claw
Hammers
Curved Claw Hammerl Solid forged for strength.
20oz/Vinyl handle - 012MEA20oz/Leather grip - 012MEHAlso available: 16oz/Vinyl handle & 24oz/Shock resistant grip & english pattern head
Straight Claw Hammerl Solid forged for strength l Long handlel English pattern headl Leather gripl Available as 24 & 28oz
Brick Hammer (Tile Setters Hammer)l 20oz available
Drywall Hammerl Crowned & scored face l Shock-resistant gripl 14oz available
Lump Hammer (Club Hammer)l 3lbs available
Weight Forward Hammerl 14” smooth face l Transfers weight forward, reducing user effortl 21oz
Straight ClawHammers
BrickHammer
LumpHammer
Weight Forward Hammer
HAMMERS
Cross Pein Hammerl Lightweight wooden handle l Wedge-shaped cross pein - ideal to start small nails and pins
600g Steelmaster Axel Carbon steel headl Ergonomic, non-slip, solvent resistant gripl Protective head cover with belt clipl Head/handle assembly can withstand pulling forces in excess of 3 metric tonnes
DynaGrip Steelmaster Claw Hammerl Carbon steel headl Ergonomic handle for comfort and grip
16oz (1-51-031) - 017CFD20oz (1-51-033) - 017CFA
DrywallHammers
Cross PeinHammer
600g SteelmasterAxe
DynaGripSteelmaster Claw Hammer
SCREWDRIVER SETS, BITS & HOLDERS
Sc
rew
dri
ve
rs INSERT BITS & HOLDERS
Hexagon Insert Bits
Long Reach Slotted Screw Insert Bits
Slotted Insert Bits
Pozidriv Insert Bits
Tip HexDrive
Lengthmm
FWBCode
Tip HexDrive
Lengthmm
FWBCode
PZ0 1/4” 25 - PZ1 5/16” 32 006NZCPZ1 1/4” 25 006MNA PZ2 5/16” 32 006NZDPZ2 1/4” 25 006MNB PZ3 5/16” 32 006NZEPZ3 1/4” 25 006MNC PZ4 5/16” 32 006NZFPZ4 1/4” 25 -
Phillips Insert Bits
Tip HexDrive
Lengthmm
FWBCode
Tip HexDrive
Lengthmm
FWBCode
PH1 1/4” 25 - PH3 1/4” 25 -PH2 1/4” 25 006MND PH4 1/4” 25 -
Bit Holders
Magnetic Bit Holder
(F) Hex AF (M) Hex AF Length mm FWB Code1/4” 1/4” 50 016AMA
SizeAF
HexDrive
Lengthmm
FWBCode
SizeAF
HexDrive
Lengthmm
FWBCode
3/32” 1/4” 25 006MOA 1/4” 5/16” 30 006OME1/8” 1/4” 25 006MOB 5/16” 5/16” 30 006OMF5/32” 1/4” 25 006MOC 5mm 5/16” 30 006OMH3/16” 1/4” 25 006MOD 6mm 5/16” 30 006ONA1/4” 1/4” 25 006MOE 7mm 5/16” 70 -
2mm 1/4” 25 - 8mm 5/16” 30 006ONB2.5mm 1/4” 25 - 3/8” 14mm 40 006ONU3mm 1/4” 25 006MPA 1/2” 14mm 40 006OPA4mm 1/4” 25 006MPB 9/16” 14mm 40 006OPB5mm 1/4” 25 006MPC 10mm 14mm 40 006OPD
6mm 1/4” 25 006MPD 12mm 14mm 40 006OPE3/16” 5/16” 30 006OMC 14mm 14mm 40 006OPF7/32” 5/16” 30 006OMD
Insert Bits & Holders
Hexagon
Long Reach Slotted Screw
Slotted
Pozidriv
Phillips
Bit Holders
Magnetic Bit Holder
Point Width Point Thickness Hex Drive FWB Code
5.5 0.87 5/16” 006ONG
6.0 1.07 5/16” 006ONH7.0 1.24 5/16” 006ONAA
Point Width Point Thickness Hex Drive FWB Code
4 0.57 1/4” 016DFJ4.5 0.65 1/4” -5.5 0.81 1/4” 016DFL6.5 0.98 1/4” 016DFM8.0 1.63 1/4” 016DFN
(F) HexAF
(M) HexAF
Lengthmm
FWBCode
1/4” 1/4” 22 007NSA3/8” 1/4” 28 007MMC
6
BIT SETS
31-Piece Multi-Pattern Bit Setl Locking bit holder l Slotted bits: 3.5, 4.5, 5.5, 6.5 & 8mml Phillips® bits: PH1, 2(x2) & 3 l Pozidrive® bits: Pz1, 2(x2) & 3l Hexagon bits: 2, 3, 4, 5, 6, 7 & 8mml Tamperproof Torx® bits: 9, 10, 15, 20, 25, 27, 30 & 40mml Robertson® square bits: no.s 1 & 2
109-Piece Multi-Pattern Bit Set & Driverl Multi-bit, quick release bit driver l Flexible extensionl Drill bit adaptor l Hook adaptor l 1/2” hex - 1/4” female square adaptor l 1/4” hex - 1/4” male adaptor l Phillips® bits: PH0-4 + 4 sparesl Pozidrive® bits: Pz0-4 + 4 spares l Slotted bits l Robertson® square bits: no.s 0-4 l Electrical security bits: no.s 1-3l Torx® bits: TX5-50 l Hex bits: 1.5-8mml Security hex bits: 1.5-8mm & 5/64”-5/32” l Spline bits: SP4-8l Torq-set bits: no.s 1/4-4 l Tri-wing bits: TW1-5 l Snake eye bits: 4-12
006NZA
Bit Set 59/S31l Set contains: 31 pieces for Slotted, Phillips PH, Pozidriv PZ,Torx and Hexagon head screws in a small practical plastic box
l Drive: 1/4” DIN 3126-C6.3. ISO 1173
011JTA
7S
cre
wd
riv
ers
SCREWDRIVER BIT SETS
Bit Sets
31-Piece Multi-Pattern Bit Sets
109-Piece Multi-Pattern Bit Set Driver
Bit Set 59/S31
Torx Plus 9-Piece Bit Setl Revolutionary Camcar Textron drive patternl Offers 100% longer average working life than other bot patternsl 25% higher torsional strength than other driver systemsl Optimum torque transmission l Set includes TXP Bit 8-40 & 1/4” bit holder
009FPX
Torx Plus Bit Set
RATCHETING SCREWDRIVER & SETSS
cre
wd
riv
ers
8
RATCHETING SCREWDRIVER SETS
Adjustable Grip Ratcheting Screwdriverl Handle can be adjusted to give an ergonomic pistol grip design,
allowing much higher torque loads to be appliedl Cartridge-style 6-bit holder concealed in handleInsert bits: Philips Tip; Ph1, 2; Pozidriv Tip; Pz1, 2; Slotted; 4, 6.5mm
008WFC
Professional Ratcheting Screwdriver Sets18 Piece Stubby l Fine tooth stubby ratcheting screwdriver handlel 50mm 1/4” hexagon drive screwdriver blade l 150mm 1/4” square drive flexible screwdriver blade l 51/4” square drive sockets: 4, 4.5, 5, 5.5, 6mml 1/4” hexagon (female) / 1/4” square drive adapter (female)l 9 1/4” square drive S2 steel insert bitsl 2 x slotted bits: 4, 6.5mml 3 x Pozidriv bits: PZ1, 2, 3 l 3 x Phillips bits: PH1, 2, 3l 1/4” hexagon (male) / 1/4” square drive adapter (male)
35 Piece l Fine tooth ratcheting screwdriver handle l 1/4” hexagon screwdriver blades - 150mm, 250mml 1/4” square drive screwdriver blade - 250mml 1/4” flexible screwdriver blade - 290mml Hexagon bits: 3, 4, 5, 6, 7 & 8mm l Slotted bits: 4, 5.5 & 7mml Pozidriv bits: No.s 1,2 & 3 l Phillips bits: No.s 1,2 & 3l Torx bits: TX10, 15, 20, 25, 27, 30 & 40l Tamperproof Torx bits: TTX10, 15, 20, 25, 27, 30 & 40l 1/4” hex - 1/4” square drive adaptor
36-Piece
18-Piece
GearDriverTM Interchangeable Shaft Systeml The latest innovation utilising GearForce Technology giving a
new standard in ratcheting screwdriversl The GearDriverTM offers unparalleled access & flexibility for a
variety of applications l The interchangeable shafts allow access to nearly any fastenerl GearDriverTM handles feature a dual durometer grip for
exceptional comfort & high torquel A wide range of sets is available. The following is just a selection
16-Piece Combination Nut Driver Set - 8916009KHG
26-Piece GearDriverTM Set - 8926009KHL
39-Piece GearDriverTM Set - 8939009KHN
46-Piece SAE & Metric Set - 8940009KHS
RATCHETING SCREWDRIVERSAdjustable GripRatcheting Screwdriver
GearDriverTM
Interchangeable Shaft System
8916 8926
89398940
Professional Ratcheting Screwdriver Sets
9S
cre
wd
riv
ers
SCREWDRIVERS
SensoPlus® VDE Screwdriversl Full compliance with European Standard IEC 60900:2004l Individually tested to 10,000V. Permanent tip type marking on
the end of the handle for convenient identification
Slotted - Codes Start: 021RIA Pozi - Codes Start: 021RHAPhillips - Codes Start: 021RFB
Universal Switch Keyl Screwdriver, radiator key, and four switches to unlock electric/gas/water cupboards and mains consoles, all in one!
l This unique pen-style key will clip into your pocket and unfolds for multi-uses
362SF SoftFinish® TORX®
MagicSpring® Screwdriverl For setting and tightening TORX® screws in difficult-to-access
placesl Retaining spring holds TORX® screws in place
T5 x 60mm - 020WLA T6 x 60mm - 020WLBT7 x 60mm - 020WLC T8 x 60mm - 020WLDT9 x 60mm - 020WLE T10 x 80mm - 020WLFT15 x 80mm - 020WLG T20 x 100mm - 020WLHT25 x 100mm - 020WLJ T27 x 115mm - 020WLKT30 x 115mm - 020WLL T40 x 130mm - 020WLMT45 x 115mm - 020WLN
Screwdrivers
SensoPlus® VDEScrewdrivers
Universal Switch Key
Closed
Open
SCREWDRIVERS
362SF SoftFinish®
TORX® MagicSpring®
Screwdriver
FatMax® XLTM Demolition Driversl Cold formed steel strike cap to withstand the heaviest blowsl Shatter resistant acetate and rubber handlel Thru-tang bar transfers strike force from cap to tip
Codes Start: 017CKM
Parallell Available in: 3mm x 100mm, 5.5mm x 125mm
Flaredl Available in: 8 x 150mm, 6.5 x 150mm, 10 x 200mm
& 12 x 250mm Codes Start: 017CKM
Bradawl Screwdriver 11/3”l Hardened, tempered and sharpened blades for efficient performance
l Nickel plated for protection against rustl Virtually unbreakable plastic handle, textured for improved grip
Pozi & Phillips Screwdriversl Available in: 100mm - PH1, PZ1, 125mm - PH2, PZ2,
150mm - PZ3, 250mm - PZ1, PZ2l Stubby - 30mm available in sizes: PH1, PZ1 & PZ2Codes Start: 017CKM
FatMax® XLTM DemolitionDrivers
Parallel
Pozi & PhillipsScrewdrivers
Flared
BradawlScrewdriver 11/3”
FatMax® Screwdriversl Large diameter handle offers great torque needed for driving wood screws
l Soft, comfortable grip handlel Colour coded ends for easy identificationl Smooth domed end for fast spinning action
FatMax® Screwdrivers
INSULATED SCREWDRIVERSS
cre
wd
riv
ers
10
SensoPlus®VDE Insulated Screwdriver Sets6 Piece - 441034 Set of 5 SensoPlus® VDE screwdrivers plus mains testerl Contains: 3 x Slotted (75 x 2.5mm, 100 x 4mm, 125 x 5.5mm),
2 x PZD/SDV (PZD 1 x 80mm, PZD 2 x 100mm)
021RPB
8 Piece - 441037 l Set of 7 SensoPlus® VDE screwdrivers plus mains testerl Contains: 4 x Slotted (75 x 2.5mm, 100 x 4mm, 125 x 5.5mm, 150 x 6.5mm), 3 x PZD/SDV (PZ 0 x 60mm, PZD 1 x 80mm, PZD 2 x 100mm)
021RPA
Insulated Screwdriver Set 822VDE/820VDEl 5-piece insulated screwdriver set for work on live equipment up to 1000 volts
l IEC 60900, DIN-EN 60900, EN 60900, VDE 0682 part 201l 822VDE type suitable for Phillips PH-head screws (1, 2mm)and slotted head screws (3, 4, 5.5mm)
l 820VDE type suitable for Pozidriv PZ head screws (1, 2mm)and slotted head screws (3.5, 4, 6.5mm)
011ALY
6-Piece Set
8-Piece Set
INSULATED SCREWDRIVERSInsulated Screwdriver Sets
SensoPlus® VDE InsuatedScrewdriver Sets
FatMax® Insulated Screwdriversl Parallel 2.5mm x 50mml Parallel 3.5mm x 75mml Parallel 4mm x 100mml Parallel 5.5mm x 150mml PH0 x 75mml PH1 x 100mml PH2 x 125ml PZ0 x 75mml PZ1 x 100mml PZ2 x 125mm
FatMax® InsulatedScrewdrivers
Insulated Screwdriver Set822VDE/820VDE
11
Sc
rew
dri
ve
rs
SCREWDRIVER SETS
SCREWDRIVER SETS
Screwdriver Sets
SoftFinish® Screwdriver Set - 6 Piecel High quality chrome-vanadium-molybdenum steel, chrome-plated
round bladesl ChromTop® finish on tip for a perfect fit every timel SoftFinish® ergonomic handle
Slotted/Pozi, contains 4 slotted 3.5, 4.5, 5.5, 6.5mm and PZ1, PZ2
Slotted/Phillips, contains 4 slotted 3.5, 4, 5.5, 6.5mm and PH1, PH2
Torx, contains T10, T15, T20, T25, T30, T40
Borneo Combination Head Screwdriver Setfor Electricians AYB.J1 - 4 Piecel Suitable for combination pattern heads used on switchgearl Designed specifically for terminals, switches, relays,
circuit-breakers, etcl Insulated to 1000vl Set includes: 2 x Pozidrive - ADYB.1 x 100VE & ADYB.2 x 125VE,
2 x Phillips APVB.1 x 100VE & APVB.2 x 125VE
Ergo® Screwdriver Set BE-9886l Set of 6 screwdrivers for Slotted, Phillips PH and Pozidrive PZ
head screwsl Permanent colour codes at both ends of the handle identifies
application type to save time l Contains: 2 Slotted (3.5, 5.5mm), 2 Phillips PH (PH1, PH2),
2 Pozidriv PZ (PZ1, PZ2)
011ALY
Screwdriver Sets
Softfinish®
Screwdriver Set - 6 Piece
Screwdriver Sets
Ergo® Screwdriver SetBE-9886
Description Sizes
8-Piece Flared & Pozidrive Set Tip
Flared Tip: 3.5, 4, 5.5, 6.5, 8Pozidriv: PZ0, PZ1, PZ2
7-Piece TorxScrewdriver Set
Torx: T10, T15, T20, T25, T27, T30, T40
8-Piece InsulatedScrewdriver Set
Insulated Parallel Tip: 2.5, 3.5, 4, 5.5Phillips PH00, PH0, PH1, PH2
8-Piece Flared & PhillipsScrewdriver Set Insulated
Flared Tip: 3.5, 4, 5.5, 6.5, 8Phillips: PH0, PH1, PH2
7-Piece Tamper Proof Torx Screwdriver Set
Tamper Proof Torx: T10, T15, T20, T25,T27, T30, T40
7-Piece StubbyScrewdriver Set
Slotted Tip: 4, 5.5, 6.5Phillips: PH1, PH2Pozidriv: PZ1, 2
Codes Start: 008VZR
FatMax® Screwdriver Sets
Size Description FWB Code
Parallel - 3mm x 100mm, 3.5mm x 75mmFlared - 8mm x 150mm, 5.5mm x 100mm
Pozi - PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm
Parallel - 3mm x 50mm, 4mm x 100mm,6.5mm x 30mm
Flared - 5.5mm x 100mm, 6.5mm x 150mm,8mm x 150mm
Pozi - PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm
Parallel - 2.5mm x 50mm, 4mm x 100mm,5.5mm x 150mm, 6.5mm x 30mm
Flared - 5.5mm x 100mm, 8mm x 150mm
Phillips - PH0 x 75mm, PH1 x 100mm, PH2 x 125mm
Pozi - PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm
7Piece
9Piece
12Piece
-
017CMH
-
FatMax®
Screwdriver Sets
Borneo Combination HeadScrewdriver Set for
Electricians AYB.J1 - 4 Piece
SPANNERS
Sp
an
ne
rs1
2SPANNERS
Combination Spannersl Some large combination spanners may be supplied with black
phosphate finishl Longer Combination Spanners are also available, in Metric & A/F
Type Sizes
MetricBihexagon
Ringmm
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32, 36,
41, 46, 50, 55, 60, 65
A/FBihexagon
Ringin
1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 1, 11/16,, 11/8,, 11/4,, 18/16,, 13/8,, 17/16,, 11/2,,
15/8,, 111/16,, 13/4,, 113/16,, 17/8,,
WhitworthBihexagon
Ringin
0.25, 0.32, 0.34, 0.41, 0.45, 0.53, 0.60, 0.71,0.92, 0.92, 1.01, 1.10, 1.20, 1.30
Open Jaw Spannersl Some large combination spanners may be supplied with black
phosphate finishl Smaller ‘Midget’ Open Jaw Spanners are also available,
in Metric, A/F & BA
Type Sizes
Metric mm
4x5, 5.5x7, 6x7, 7x8, 8x9, 8x10, 10x11, 10x13,12x13, 13x17, 14x15, 16x17, 17x19, 18x19, 19x22,20x22, 21x23, 22x24, 24x26, 24x27, 24x30, 25x28,27x30, 27x32, 30x32, 32x35, 32x36, 36x41, 46x50,
55x60
A/F in
1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 11/16, 5/8 x 11/16, 11/16 x 3/4, 3/4 x 7/8, 13/16 x 7/8,
13/16 x 15/16, 15/16 x 1, 15/16 x 11/8, 11/16, x 11/8,
11/16, x 11/4, 11/4, x 17/16, 15/16 x 11/2, 15/8 x 113/16,
111/16, x 17/8,
Whitworth in1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16,
7/16 x 1/2, 1/2 x 9/16, 1/2 x 5/8 9/16 x 11/16, 5/8 x 11/16, 11/16 x 3/4, 3/4 x 7/8, 7/8 x 1, 11/8, x 11/4
Ring Spannersl Smaller ‘Mini’ & ‘Midget’ Open Ring Spanners are also
available, in Metric & BA
Type Sizes
MetricBihexagon
mm
5.5x7, 6x7, 8x9, 8x10, 10x11, 10x13, 12x13,13x17, 14x15, 16x17, 17x19, 18x19, 19x22, 19x24, 20x22, 21x23, 22x24, 24x26, 24x27, 24x30, 25x28, 27x30, 27x32, 30x32, 32x36,
36x41, 41x46, 46x50, 55x60
A/FBihexagon in
1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 3/4 x 7/8, 13/16 x 7/8,
15/16 x 1, 11/4, x 17/16, 15/16 x 11/2
WhitworthBihexagon
in1/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 11/16 x 3/4, 7/8 x 1
Also Available:Long & Short Series Spanners
Open Jaw Spanners
Ring Spanners
A range of spanners are available from: Britool:
Britool spanners are manufactured to the latest ISO standards. All are forged from the highest quality steel and precision machined
for exacting standards. They fulfil the needs of the professionalengineer.
Codes Start: 006NMA
Facom:Produced at an ISO 9002 approved facility the utmost reliability of
Facom tools stems from cold forging and repeated stringent checksthroughout manufacturing process. The range covers all generally
used tools for the automotive & engineering user.Codes Start: 016KFM
Teng:Teng tools are one of Europe’s leading brand names for
professional quality mechanics hand tools. The range covers allcommonly used tools for the automotive user.
Codes Start: 009FAM
Bahco:Renowned for quality, performance & value for money,
professionals the world over rely on Bahco tools. All aspects ofBahco’s business fully comply with ISO9000 & 14000.
Codes Start: 011BYP
Combination Spanners
13
Sp
an
ne
rs
SPANNER SETS
SPANNER SETS Combination Spanner Sets
Combination Spanner Sets
Open Jaw Spanner Sets
Pieces Per Set
Sizes - mm FWB Code
7 10,11, 12, 13, 14, 17, 19 008PXG
12 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 008PXH
17 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,21, 22, 23, 24
008PXF
A/FPieces Per Set
Sizes - in FWB Code
7 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 008PXC
10 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 008PXD
143/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16,
1, 11/16, 11/8, 11/4008PXE
WhitworthPieces Per Set
Sizes - in FWB Code
11 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 008PXB
Open Jaw Spanner Sets
Pieces Per Set
Sizes - mm FWB Code
7 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 008PUH
11 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19,20x22, 21x23, 24x26, 27x30
008PVA
Metric
A/FPieces Per Set
Sizes - in FWB Code
65/16 x 3/8, 7/16 x 1/2, 9/16 x 5/8, 11/16 x 3/4,
13/16 x 7/8, 15/16 x 1 008PTG
75/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8,
5/8 x 11/16, 11/16 x 3/4 008PTH
101/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16, 7/16 x 1/2, 1/2 x 9/16,9/16 x 5/8, 5/8 x 11/16, 11/16 x 3/4, 3/4 x 7/8, 15/16 x 1 008PUB
Whitworth
Pieces Per Set
Sizes - in FWB Code
91/8 x 3/16, 3/16 x 1/4, 1/4 x 5/16, 5/16 x 3/8, 3/8 x 7/16,
7/16 x 1/2, 1/2 x 9/16, 9/16 x 5/8, 5/8 x 11/16 008PTE
Also Available:Midget Open Jaw Spanner Sets
Ring Spanner Sets
Pieces Per Set
Sizes - mm FWB Code
7 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 008PWG
10 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19,21x23, 22x24, 24x27
008PWH
Metric
A/F
Pieces Per Set
Sizes - in FWB Code
61/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 5/8 x 11/16,
3/4 x 7/8, 15/16 x 1 008PWA
Whitworth
Pieces Per Set
Sizes - mm FWB Code
5 1/8 x 3/16, 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16, 11/16 x 3/4 008PVE
Also Available:Mini Ring Spanner Sets
Ring Spanner Sets
Metric
ADJUSTABLE & SPECIALIST WRENCHES
ADUSTABLE WRENCHESAdjustable Wrenches
Ergo® 90/90P Series, Phosphated Adjustable Wrenchl Precision hardened and anti-corrosion treatedl Comfortable thermoplastic handle and larger grip widthl Series 90P includes a combination of pipe grip facility, one side
serrated, may be used as a pipe wrenchl Sizes range from 20mm to 35mm
Codes Start: 009ZWJ
80 Series, Phosphated Adjustable Wrenchl Precision hardened and anti-corrosion treatedl Comfortable thermoplastic handle and larger grip widthl Sizes range from 13mm to 53mm
Codes Start: 009ZVA
Ergo® 9029/9031 Phosphated Adjustable Wrenchl Special wrench with extra width jaw, 40% wider than compared
with standard of equipment sizel Precision hardened and anti-corrosion treatedl Comfortable thermoplastic handle and larger grip widthl Sizes: 9029 - 32mm, 9031 - 38mm
9029 - 009ZWC 9031 - 009ZWD
Also Available:Spare Part Kits
for the 90 & 80 series wrenches
Wre
nc
he
s1
4
SPECIALIST WRENCHES
“C” Hook Wrenches.
Size - mm Length - mm FWB Code
19-51. 165 008MPF32-76 216 008MPG51-121 267 008MPH
Ratcheting Podger Wrenchl For scaffolding & steel work applications
Size - mm Type FWB Code
17 Open Jaw 008ZMA19 Open Jaw 008ZMB24 Open Jaw 008ZMD24 Ring 008ZSD27 Open Jaw 008ZME27 Ring 008ZSE30 Open Jaw 008ZMF
30 Ring 008ZSF
36 Open Jaw 008ZMH
36 Ring 008ZSH
41 Open Jaw 008ZNA41 Ring 008ZTA
Specialist Wrenches
“C” HookWrenches
RatchetingPodger Wrench
80 Series PhosphatedAdjustable Wrench
Ergo® 9029/9031Phosphated
Adjustable Wrench
Ergo® 90/90P Series,Phosphated
Adjustable Wrench
15
Wre
nc
he
sRATCHETING WRENCHES
GEARWRENCHTM RATCHETING WRENCHES
The largest & widest range of ratcheting wrenches to suit most engineering applications; from the manufacturers of the originalpatented 5” racheting wrench.l The racheting end comes with Surface Drive® Technology which
drives against the flat of the fastener and not the pointsl Meets & exceeds all international specifications such as DIN &
ANSI for a standard fixed style box & wrenchl Ideal for using on soft materials such as copper, brass,
mild steel & carbon steel fastenersl The surface drive can be used to loosen rounded fastenersl Sleek head design enables access to tight spots where a
ratchet will not fitl Each GearWrenchTM product comes with a liftime warranty
against manufacturing defects
Combination GearWrenchTM
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
5.5 009KAA 11 009KAG 17 009KAN 24 009KAV6 009KAB 12 009KAH 18 009KAO 25 009KAW7 009KAC 13 009KAJ 19 009KAP 27 009KAX8 009KAD 14 009KAK 20 009KAR 30 009KAY9 009KAE 15 009KAL 21 009KAS 32 009KAZ10 009KAF 16 009KAM 22 009KAT 34 009KBA
Also available:XL Combination GearWrenchTM
l Longer length gives 25% more torque when loosening fasteners
Sizes: 8mm to 24mm
Stubby Combination GearWrenchTM
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
10 009KCA 13 009KCD 16 009KCG 19 009KCK11 009KCB 14 009KCE 17 009KCH12 009KCC 15 009KCF 18 009KCJ
Flex GearWrenchTM
l 180o flex action head allows the precision GearWrenchTM
to reach into the tightest places
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
8 009KEA 12 009KEE 16 009KEJ 21 -9 009KEB 13 009KEF 17 009KEK 22 -10 009KEC 14 009KEG 18 009KEL 24 -11 009KED 15 009KEH 19 009KEM 25 -
Also available:XL Locking Flex Head GearWrenchTM
Sizes: 8mm to 19mm
Stubby Flex GearWrenchTM
l Short pattern, slim head & slim body for reaching into places where no other wrench will fit.
Sizes: 10mm to 19mm
Reversible GearWrenchTM
l Reverses with the click of a lever. Has a 15o offset head
Double Box GearWrenchTM
Sizes: 8x9mm to 17x19mm
Half Moon Reversible GearWrenchTM
& S Reversible GearWrenchTM
l These wrenches erase the problem of reaching round obstructions & moving a fastener
Sizes: 10x12mm to 19x22mm
Size mm
FWB Code
Size mm
FWB Code
Size mm
FWB Code
8 009KDA 12 009KDE 16 009KDJ9 009KDB 13 009KDF 17 009KDK10 009KDC 14 009KDG 18 009KDL11 009KDD 15 009KDH 19 009KDM
Also available: 21, 22, 24, 25mm
GearWrenchTM
Ratcheting Wrenches
CombinationGearWrenchTM
XL CombinationGearWrenchTM
Stubby CombinationGearWrenchTM
FlexGearWrenchTM
XL Locking FlexGearWrenchTM
Stubby FlexGearWrenchTM
ReversibleGearWrenchTM
Double BoxGearWrenchTM
Half Moon ReversibleGearWrenchTM
RATCHETING WRENCH SETS
Wre
nc
he
s1
6Ratcheting Wrench Sets RATCHETING WRENCHES
Flexible Racheting Combination Wrench Set - 12 Piece
Double Ended Ratcheting Ring Wrench Set- 5 Piece
Professional Stubby Combination Wrench Set- 7 Piece
Flexible RatchetingCombination Wrench Set
Double Ended Ratcheting Wrench Set
Professional StubbyCombination Wrench Set
Ratcheting Combination Wrenches - 9 Piecel 72 tooth ratchet mechanism gives a 5
oworking arc
l Contains sizes: 5-19mml Complies with ISO 1711-1l Recessed change levers to prevent accidental direction change
Low Profile Ratcheting Ring Wrenches - 4 Piecel 72 tooth ratchet mechanism gives a 5o working arcl Extra low profile for difficult access workl Complies with ISO 1711-1l Contains sizes 10-19mm
15o Offset Ratcheting Ring Wrenches - 6 Piecel 72 tooth ratchet mechanism gives a 5o working arcl Contains sizes: 8-19mml Recessed change lever to prevent accidental direction change
Stubby Ratcheting Ring Wrenches - 6 Piecel 72 tooth ratchet mechanism gives a 5o working arcl Shortened length for greater accessibilityl Recessed change lever to prevent accidental direction changel Contains sizes: 8mm - 14mm
Flex Head Ratcheting Combination Wrenches- 9 Piecel 72 tooth ratchet mechanism gives a 5o working arcl 180o flex head for accessibility and flexibilityl Recessed change lever to prevent accidental direction changel Contains sizes: 8mm - 19mm
GearWrenchTM XL X-BeamTM RatchetingWrenchesl Unique patented design provides a 500% increase in surface
contact area than a standard handle wrenchl The design allows the application of force to the flat thus
reducing hand fatigue. Recommended by the American Arthritis Foundation for its ease of use
l The open end has a Surface Drive Plus feature to provide a stronger grip on fasteners & can deliver 25% more torque. The ratcheting end has been srengthened to allow for the increase in torque and exceeds all international standards for ratcheting wrenches
Sizes: 8mm to 19mm (Also available as a complete set)16 Piece Set - 009KHC
Tap & Die Drive Toolsl A ratcheting handle with 5o movement and a reversible lever
eliminates hand-over-hand turning l Handle can be used in tight confined spaces - & with a Vortex
GearRatchetTM extension enables you to reach deep applicationsl For maintenance & repair applications for re-tapping threaded
holes & bruised threadsl There are full sets of metric taps & dies available including metric
fine and M7, M9 & M11. SAE sizes also available in UNC & UNF
75 Piece Set - 009KHA
GearWrenchTM
Ratcheting Wrenches
Sizes - mm FWB Code8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 008NFH
Sizes - mm FWB Code8x10, 10x11, 12x13, 14x15, 17x19 008NFP
Ratcheting Combination Wrench Set - 12 Piece
Sizes - mm FWB Code8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 008NFL
Sizes - mm FWB Code10, 12, 13, 14, 15, 17, 19 008VZN
Tap & Die Drive Tools
XL X-BeamTM
Ratcheting Wrenches
Low Profile Ratcheting Ring Wrenches
Ratcheting Combination Wrench Set
15o Offset RatchetingRing Wrenches
Stubby Ratcheting Ring Wrenches
Flex Head Ratcheting Combination Wrenches
17
Wre
nc
he
sTORQUE & IMPACT WRENCHES
TORQUE WRENCHES
Classic Mechanical Torque Wrenches
Torque Multipliers
Dynapact Impact Wrench
Torque Multipliers
Classic Mechanical Torque Wrenches
Rahsol Dremotac Torcoflex K Torque Wrenchl Push-through square drive for controlled bi-directional tighteningl Intergrated ratchet function l Double scale Nm/ibf.ftl 3/8”-1/2” Square Drive
Series 2
Torcoflex K TorqueWrench
IMPACT WRENCHES
Dynapact Impact Wrenchl Stores free energy to release seized or very tight fastenersl One handle rotation through 60o releases impacts to release
stubborn fastenersl 10 impacts equates to 1000Nm or torquel No power source required
Square Drive Torque Range Nm Length - mm FWB Code3/8 2.5-11 318 007NRE3/8 5-33 422 007NRF3/8 12-68 476 007NRG1/2 12-68 476 007PXE1/2 25-135 546 007PXF1/2 50-225 597 007PXG1/2 70-330 825 007PXH3/4 140-560 1130 008TOB3/4 200-810 1181 -1 480-940 1397 -
Series 2 Torque Wrenchesl Strong 72 tooth ratchetl Split scale adjustment system for coarse & fine adjustmentl Positive lock - preventing accidental adjustment whilst in use
Nm/lbf.ft FWB Code
10-100/8-75 027DRL20-200/15-150 027DRN60-300/45-220 027DRP
Torque Wrenches
Input Max. InputNm
Output Max. OutputNm
TorqueMultiplication
3/4 560 1 2800 5x1/2 407 3/4 1350 3.3x
Ratchet Drivein
Capacity NmMin. - Max.
Lengthmm
1/4 5-25 2903/8 10-10 3701/2 20-100 4351/2 40-200 4951/2 60-340 650
RATCHETS & ACCESSORIES
Ra
tch
ets
18
SQUARE DRIVE RATCHETS & ACCESSORIES
Lever Reversible Ratchetl 72 tooth twin pawl mechanisml Available with steel or polypropylene handle
Standard: 1/4” - 007NTA 3/8” - 007MOA 1/2” - 007OWD
Flexible Head: 3/8” - 007MOB 1/2” - 007OXE
Swivel Head: 1/4” - 008NTAF 1/2” - 008OWDF
A range of ratchets are available from: Britool:
Britool tools are manufactured to the latest ISO standards. All are forged from the highest quality steel and precision machined
for exacting standards. They fulfil the needs of the professionalengineer.Facom:
Produced at an ISO 9002 approved facility the utmost reliability ofFacom tools stems from cold forging and repeated stringent checksthroughout manufacturing process. The range covers all generally
used tools for the automotive & engineering user.Teng:
Teng tools are one of Europe’s leading brand names for professional quality mechanics hand tools. The range covers all
commonly used tools for the automotive user.
Lever Reversible Ratchet with Lock Onl Quick release mechanism locks the socket into placel Available with polypropylene handle
1/2” - 007OXEB
Fine Tooth Ratchetl 72 tooth twin pawl mechanisml Available with steel or polypropylene handlel 1/4” & 1/2” also available
3/8” - 007MOJ
Clutch Ratchetl Roller bearing mechanism l Polypropylene handle
3/8” - 007MOF 1/2” - 007OXA
Extension Barsl Various lengths availablel Sizes: 1/4”, 3/8”, 1/2”, 3/4”, 1”
Codes Start: 007NTB
Wobble Extension1/4” - 006RAL 3/8” - 007NTC 1/2” - 007OWM
Flexible Extension1/4” - 007NWA 3/8” - 007MPG
“T” Handle1/4” - 007NTH 3/8” - 007MPB 1/2” - 007OXC3/4” - 008STA 1” - 008RZH
Swivel Handlel Available with steel or polypropylene handle
1/4” - 007NVE 3/8” - 007MPD 1/2” - 007OXF
Universal Joint1/4” - 007NVG 3/8” - 007MPE 1/2” - 007OZA 1” - 008SMD
Converters1/4” male to 3/8” female - 007OPG1/4” female to 3/8” male - 007OSB3/8” male to 1/2” female - 007NNH3/8” female to 1/2” male - 007NOH1/2” male to 3/4” female - 007PXA1/2” female to 3/4” male - 007PXB
Speed Bracel Polypropylene handlel Various sizes available
3/8” - 007MOC
Square Drive Ratchets & Accessories
Lever Reversible Ratchet
Lever Reversaible Ratchet with Lock On
Fine Tooth Ratchet
Clutch Ratchet
Extension Bars
Wobble Extension Flexible
Extension
“T” Handle
Swivel Handle
Universal Joint
Converters
Speed Brace
19
So
ck
etr
ySOCKETRY
SOCKETS Sockets
Engineers’ 1/2” Sockets - Metric
Heavy Duty 3/4” Sockets
Engineers’ 1/2” Sockets - Whitworth
Engineers’ 1/2” Sockets - A/F
Sizes - mm
Bihexagon 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32
Sizes - mm Length - mm
Deep Bihexagon
12, 13, 14, 15, 16, 17,
18, 19, 21,22, 24
75808590
Sizes - mm
Hexagon 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
Sizes - mm
Hexagon Bit Sockets 6, 7, 8, 10, 12, 14, 17, 19
Sizes - mm
Bihexagon 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4
Sizes - mm
Bihexagon 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 21/32, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1, 11/16, 11/8, 13/16, 11/4,
Sizes - in Length - in
Deep Bihexagon
1/2 9/16, 5/8, 11/16
3/4, 13/167/8, 15/16, 1, 11/16, 11/8
75808590
Sizes - in
Hexagon 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 21/32, 11/16, 3/4
Sizes - mm
Hexagon 6, 7, 8, 10, 12, 14, 17, 19
Sizes
MetricBihexagon
mm 22, 23, 24, 26, 27, 29, 30, 32, 33, 36, 38, 40, 41, 42, 46, 50, 55
A/FBihexagon in
7/8, 15/16, 1, 11/16, 11/8, 113/16, 11/4, 13/8, 15/16,
17/16, 11/2, 19/16, 15/8, 111/16, 13/4, 111/16, 13/4,
113/16, 17/8, 2WhitworthBihexagon
in 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 11/8,
11/4, 13/8,
Codes Start: 006RBD
SOCKETRY
IMPACT SOCKETS
1/2” Impact Sockets - Metric
3/4” Impact Sockets - Metric
14 Piece 1/2” SD Deep Metricl Contains: 14 cold forged deep metric hexagon impact sockets
10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24, 27, 30, 32mm and locking pins & rings.
008TWZ
1/2” Impact Sockets - A/F
3/4” Impact Sockets - A/F
So
ck
etr
y2
0
Sizes - mm
Hexagon 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24,27, 29, 30, 32, 33, 26
Sizes - in Length - in
Deep Hexagon
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21,
22, 23, 24, 27, 29, 30,32, 33, 36
75808590
Sizes - mm
Hexagon 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 11/16,11/8, 13/16, 11/4, 15/16
Sizes - in Length - mm
Deep Hexagon
3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16
7/8, 15/16, 1, 11/16, 11/8,
13/16, 11/4, 15/16,
83
89
Sizes - mm
Hexagon 19, 24, 26, 27, 28, 30, 32, 33, 35, 36, 38, 41, 46, 50
Sizes - in
Hexagon 3/4, 13/16, 7/8, 15/16, 1, 11/16, 11/8, 13/16, 11/4, 15/16, 13/8,17/16, 11/2, 15/8,113/16
Codes Start: 008TRKA
Impact Sockets
IMPACT SOCKET SETS
17 Piece 1/2” SD Deep Metricl Contains: 16 cold forged metric hexagon impact sockets
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm,125mm impact extension bar and locking pins & rings.
008TWY
21
So
ck
etr
ySOCKET SETS
Socket Sets
GearRatchet VortexTM
Socket System
8925
8946
SOCKET SETS
SD Socket-Only Sets, Metric1/4” SD: 3-Piece from 4mm
13-Piece from 4mm3/8” SD: 3-Piece from 6mm
14-Piece from 6mm1/2” SD: 3-Piece from 10mm
10-Piece from 10mm16-Piece
SD Socket-Only Sets, AF1/4” SD: 10-Piece from 5mm 3/8” SD: 15-Piece from 6mm1/2” SD: 14-Piece
SD Socket-Only Sets, Deep Metric1/4” SD: 9-Piece from 3/16” 3/8” SD: 13-Piece from 1/4”1/2” SD: 15-Piece
SD Socket Sets, Metric1/4” SD: 18-Piece, 46-Piece & 58-Piece3/8” SD: 18-Piece, 24-Piece, & 60-Piece1/2” SD: 26-Piece & 44-Piece3/4” SD: 26-Piece
SD Socket Sets, A/F1/2” SD: 23-Piece
SD Socket Sets, Whitworth1/2” SD: 6-Piece
SD Socket Sets, Mixed1/4” SD: 27-Piece Metric & A/F
77-Piece Metric, A/F & Torx 3/8” SD: 88-Piece Metric, A/F & Torx 1/2” SD: 56-Piece Metric, A/F & Torx
Mixed Drive Socket Set9-Piece - 1/4” & 3/8” SD Hexagon Insert Bit13-Piece - 1/4”, 3/8” & 1/2” SD Female Torx 14-Piece - 1/4” & 3/8” SD Torx Bit 71-Piece - 1/4” & 3/8” SD Metric 110-Piece - 1/2” & 1/4” SD Metric
GEARRATCHET VORTEXTM SOCKET SYSTEMl The patented GearRatchetTM is the next generation in ratchets
& socketsl Unique design has a ultra-low profile, extra strength & the speed
of a 5o precision movement. The GearRatchetTM VortexTM Socket System has a complete line of SAE & metric sockets. The ultra thin GearRatchetTM VortexTM socket & extension design will reach into deep recesses & eliminates the need for a deep socket
l The open end has a Surface Drive Plus feature to provide a stronger grip on fasteners & can deliver 25% more torque. The ratcheting end has been strengthened to allow for the increase in torque and exceeds all international standards for ratcheting wrenches
l A wide range of sets is available. The following is just a selection
14-Piece Fractional Vortex Set - 8914l GearRatchet handlel 13 x SAE Vortex Sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”l 1/4” & 3/8” Drive GearRatchet Adapters
009KFA
25-Piece Metric Vortex Set - 8925l 13mm Vortex Drive GearRatchet handlel 9 x SAE (5/32” - 1/2”) & 13 x Metric Pass Thru Sockets
(3.5mm - 13mm) l 3” Socket Extension l 1/4” Drive Adapter
009KHJ
46-Piece SAE & Metric Vortex Set - 8946l 13mm Vortex Drive GearRatchet handle l Vortex Hollow 3” Extensionl 13mm Dr x 1/4” M Quick Release Adapterl 9 x SAE (5/32” - 1/2”) & 13 x Metric (3.5mm - 13mm) Vortex Socketsl 20mm GearRatchet Handle l Vortex Hollow 3” Extensionl 20mm Dr x 1/4” & Dr x 3/8” M Quick Release Adaptersl 7 x SAE (3/8” - 3/4”) & 10 x Metric (10mm - 19mm) Vortex Sockets
009KHS
Metric
AF
Deep Metric
Whitworth
So
ck
etr
y2
2SOCKET SETS
SOCKET SETS
16 Piece 1/4” Socket Set - S160l Contains: 12 dynamic drive sockets ranging from 4mm to 13mm.1 x 60 teeth ratcheting handle. 1 x 100mm sliding t-bar. 1 x 75mm extension bar and 1 x 150mm flexible extension bar
011AAL
24 Piece 1/2” Socket Set - S240l Contains: 16 dynamic drive sockets ranging from 10mm to 32mm.1 x 60 teeth ratcheting handle. 2 x extension bars - 5”, 10”.1 x universal joint. 1 x t-adapter and 1 x breaker bar with flexible square
011AAP
25 Piece 1/4” Socket Set - SL25l Contains: 12 dynamic drive sockets ranging from 4mm to 13mm.1 x ratchet. 2 x Phillips bits, 2 x Hex bits. 6 x Torx bits ranging from 10 to 40. 1 x bit holder with locking spring and 1 x wobbleextension bar
34 Piece 1/4” & 3/8” Socket Set - S330l Contains: 12 x 3/8” dynamic drive sockets ranging from 10mm to
32mm. 2 x 3/8” extension bars - 75mm, 150mm. 1 x 3/8” universaljoint, 1 x bit holder, 2 x 3/8” spark plug sockets - 16mm, 21mm.1 x 1/4” bit holder. 3 x 1.4” flat bits - 4, 5.5, 7mm. 4 x 1/4” Phillips PH bits - PH1, PH2, PH3, PH4. 6 x 1/4” Hex bits ranging from3 to 8mm and 1 x 3/8” 60 teeth ratchet
40 Piece 1/2” Socket Set - S400l Contains: 21 dynamic drive sockets ranging from 4mm to 13mm.
1 x 60 teeth ratcheting handle. 2 x extension bars - 5”, 10”.1 x universal joint, 1 x t-adapter. 1 x breaker bar with flexible square and 13 combination spanners ranging from 4mm to 19mm
011AAX
46 Piece 1/4” Socket Set - S460l Contains: 12 dynamic drive sockets ranging from 4mm to 13mm.
4 x Phillips PH pocket drivers - PH1 to PH4. 3 x flat pocket drivers - 4 to 7mm. 6 x Hex socket drivers - 3 to 10mm. 7 x Torxsocket driver - T8 to T30. 3 x Torx sockets - E6, E7, E8. 1 x spinner disc. 1 x sliding t-bar. 1 x spinner. 1 x flexible extension bar. 3 x Hex L-keys - 1.5, 2, 2.5mm and 1 x 60 teeth ratcheting handle, 2 x extension bars - 2”, 4”. 1 x universal joint
011AAZ
94 Piece 1/4” & 1/2” Socket Set - S87+7l Contains 1/4” sizes: 12 dynamic drive sockets ranging from 4mm
to 13mm. 9 deep drive sockets ranging from 4mm to 13mm.Phillips PH pocket drivers - PH1 to PH4. 3 x flat pocket drivers- 4 to 7mm. 6 x Hex socket drivers - 3 to 10mm. 7 x Torx socket driver - T8 to T30. 3 x Torx sockets - E6, E7, E8. 1 x sliding t-bar,1 x spinner, 1 x flexible extension bar. 3 x Hex L-keys - 1.5, 2, 2.5mm and 1 x 60 teeth ratcheting handle. 2 x extension bars - 2”, 4”. 1 x universal joint. 4 piece flex head spanners ranging from 8 to 15mm and 13 combination spanners ranging from 4mm to 19mm
l Contains 1/2” sizes: 15 drive sockets ranging from 10mm to 34mm.9 x AF drive sockets ranging from 3/8” to 7/8”. 4 x impact sockets- 17mm to 24mm. 2 x extension bars - 50mm, 100mm. 1 x universal joint. 1 x spark plug socket and 1 x t-adapter
011AAH
S160
S240
SL25
S330
S400
S460
S87+7
Socket Sets
23
Pli
ers
ENGINEER’S PLIERS
GrooveLock®
Joint Pliers
RedlineTM
CombinationPliers - 3867
DiagonalCutters
End Cutter
Plier Sets
Side Cutters - 3867
Ergo®
CombinationPliers - 2628G Combination
Pliers
Ergo® Side CuttingPliers - 2101G
ENGINEERS’ PLIERS
GrooveLock® Joint Pliersl Multi-groove ratcheting system allows for twice the number
of groove positions of traditional groove joint pliers.
Combination Pliers
RedlineTM Combination Pliers- 3867l Extra long cutting edges induction hardened for use on
medium/hard wire, round & flat cable
6” - 021OYA 7” - 021OYB 8” - 021OYC
Diagonal Cutters
End Cutter
Length - mm Max Wire Dia. - mm FWB Code200 2 008VEW
Ergo® Combination Pliers - 2628Gl Cuts hard materials such as piano wire and spring steel wirel Round shape jaws give improved accessibility in confined spacesl Equipped with a return spring featuring on/off function
160mm - 011FEF 180mm - 011FEH
Ergo® Slip Joint Pliers - 8224/8225Cl Includes flat and pipe grip jaws, self locking jaws grip tightly at
three pointsl Speedy one hand setting by pressing a button on upper handlel Can be adjusted with parallel jaws in 11 different positions
250mm - 011HZV 315mm - 011HZX
Ergo® Slip Joint Pliers - 8231l Extra wide jaw opening combined with short handlel Ideal for plumbers l Speedy one hand setting l Parallel jaws can be adjusted in 13 positionsl 225mm
Side Cutters - 3773l Oval head for use in confined areas. Three cut options
115mm - 021PBM
Ergo® Side Cutting Pliers - 2101Gl Cuts hard materials at the joint and softer materials at the tipl Round shape jaws give improved accessibility in confined spacesl Equipped with a return spring featuring on/off function
140mm - 011ETA 160mm - 011ETB 180mm - 011ETC
PLIER SETS
3-Piece Plier Sets180mm Combination Plier,200mm Long Nose Plier & 166mm Side Cutter - 008VFPAlso available: 180mm Combination Plier,200mm Long Nose
Plier & 240mm Multi-grip Plier
Adjustable Circlip Pliers Set - 3716l Push button adjustment adapts the product for use on both
inside & outside circlips
021NXZ
Locking Twin Slip Joint Multigrip Pliersl Quick permanent push button adjustment and lockingl High-frequency, induction hardened tips for enhanced wear
resistancel One hand unlocking
Description8”/200mm Groovelock, Capacity 1-3/4”/44mm
10”/250mm Groovelock, Capacity 2-1/4”/57mm
12”/300mm Groovelock, Capacity 2-3/4”/70mm
8/10/12” (200/250/300mm) Groovelock 3-Piece Roll-Set
Length - mm Max Wire Dia. - mm FWB Code
165 1.6 008VEB180 1.8 008VED
Length - mm Max Wire Dia. - mm
166 1.6187 1.8
Engineers’ Pliers
Ergo® Slip JointPliers - 8224/8225C
Ergo® Slip JointPliers - 8231
Locking Twin SlipJoint Multigrip Pliers
3 Piece Plier Sets
Adjustable Circlip Pliers - 3716
CIRCLIP PLIERS
CIRCLIP PLIERS
Pli
ers
24
Straight Nose Internal Pliers
Length mm
Tip Dia.mm
Size of Circlips - mmMin Max
FWB Code
140 0.9 8 12 -140 1.3 12 25 008VBD180 1.8 19 60 008VBF215 2.3 40 100 008VBH
Bent Nose Internal Pliers
Length mm
Tip Dia.mm
Size of Circlips - mmMin Max
FWB Code
130 0.9 8 12 -130 1.3 12 25 008VBE
Straight Nose External Pliers
Length mm
Tip Dia.mm
Size of Circlips - mmMin Max
FWB Code
145 0.9 3 10 -145 1.3 10 25 008VBM180 1.8 19 60 008VBP215 2.3 40 100 008VBR
Bent Nose External Pliers
Length mm
Tip Dia.mm
Size of Circlips - mmMin Max
FWB Code
130 0.9 3 10 -130 1.3 10 25 008VBN170 1.8 19 60 008VBQ200 2.3 40 100 008VBS
Inside Circlip Pliers, Straight - 3710
Outside Circlip Pliers, Straight - 3711
Inside Circlip Pliers, Bent - 3712
Outside Circlip Pliers, Bent - 3713
Outside Circlip Pliers Fine Pointed, Bent - 37130
Circlip Pliers
Straight Nose Internal Pliers
Bent Nose Internal Pliers
Straight Nose External Pliers
Bent Nose External Pliers
Inside Circlip Pliers,Straight - 3710
Outside Circlip Pliers,Straight - 3711
Inside Circlip Pliers,Bent- 3712
Outside Circlip Pliers,Bent - 3713
Outside Circlip PliersFine Pointed, Bent- 37130
Length mm Min Max
FWB Code
140mm (51/2”) 12 25 021NYA180mm (7”) 19 60 021NYB
220mm (81/4”) 40 100 021NYC300mm (12”) 85 140 021NYD
Size of Circlips - mm
Length mm Min Max
FWB Code
140mm (51/2”) 10 25 021NYE
180mm (7”) 19 60 021NYF
220mm (81/4”) 40 100 021NYG
Size of Circlips - mm
Length mm Min Max
FWB Code
180mm (7”) 19 60 021NZB
Size of Circlips - mm
Length mm Min Max
FWB Code
140mm (51/2”) 10 25 021NZE180mm (7”) 40 100 021NZF
Size of Circlips - mm
Length mm Min Max
FWB Code
140mm (51/2”) 3 10 -
Size of Circlips - mm
25
Pli
ers
PLIERS & CUTTERS
RedlineTM Pliers
Side Cutters - 3750
Side Cutters - 3751
Wire Stripping Pliers- 3754
Snip Nose Pliers - 3906
VDE CombicuttersTM
- 431004/9/8
VDE Combination Plier- 431002/3
VDE High Leverage SideCutters - 431006/7
VDE Bent Snipe Nose Plier- 431015
VDE Heavy Duty CableShears - 431030/1
VDE Wire Stripping Pliers- 431012
REDLINETM PLIERS & CUTTERS
RedlineTM PliersManufactured in Germany to stringent international standards.
Ergonomically designed, with contoured anti-slip shoulders - combined with strength & durability
Side Cutters - 3750l Head & jaw configuration gives high leverage & ease of usel 180mm
Side Cutters - 3751l For use on soft up to hard wire130mm (5”) - 021OQA 145mm (51/2”) - 021OQC160mm (6”) - 021OQF 180mm (7”) - 021OQH
Wire Stripping Pliers - 3754l Ideal for repetitive wire stripping160mm (6”) - 021ORD
Snipe Nose Pliers - 3906l Long head snipe nosed pliersl Cut inside joints, rod gripping nose & cutting edges
200mm (8”) - 021PMH
RedlineTM VDE PliersRedlineTM VDE pliers conform to the highest standards,
manufactured in accordance with IEC 60900:2004. Fully approved& independently audited by the German VDE Institute.
VDE CombicuttersTM - 431004/9/8l The plier that strips, bends & shears l 160mm (6”)
Combicutter1TM sidecutters with patress screw shears - 021NXMCombicutter2
TMsidecutters with patress screw shears & wire strip-
ping notches also available
Combicutter3TM
sidecutters with patress screw shears, wire stripping notches & wire bending anvil - 021RVD
VDE Combination Plier - 431002/3l Extra long cutting edges, induction hardened for use on medium
& hard wire, round & flat cable
185mm (7”) - 021NXKY 205mm (8”) - 021NXL
VDE Heavy Leverage Side Cutters - 431006/7l Heavy duty design cutting extra leverage for easier cuttingl 165mm (61/2”) & 200mm (8”) available
VDE Side Cutter - 431005l Head design gives high leverage & easy clean cuttingl 180mm (7”) available
VDE Stripping Pliers - 431012l Ideal for repetitive wire stripping, adjustable capacity & spring
assisted opening l 165mm (6”) available
VDE Heavy Duty Cable Shears - 431030/1l Compact cable cutter suitable for copper or aluminium wirel 165mm (6”) & 210mm (81/2”) available
VDE Bent Snipe Nose Plier - 431015l 45o bent nose with serrated inside jaws, rod fripping hole
& cutting edgesl 200mm (8”) available
VDE Snipe Nose Plier - 431013/4l Serrated inside jaws with rod gripping hole & cutting edgesl 175mm (61/2”) & 200mm (8”) available
175mm - 021NXN
VDE Snipe Nose Plier - 431013/4
VDE Side Cutter- 431005
SPECIALIST PLIERS
SPECIALIST PLIERS
Pli
ers
26
Specialist Pliers
Vise-Grip®
Locking Wrench Wire TwistingPliers
Fencing Pliers - 3866
Inomic Pliers
Multigrip Plier
Length - mm Max Wire Dia. - mm FWB Code240 47 008VCF
Long Snipe Nose PlierLength - mm Max Wire Dia. - mm FWB Code
200 1.6 008VEJ
Bent Snipe Nose Plier
Length - mm Max Wire Dia. - mm FWB Code194 1.6 008VCL
Ergo® Snipe Nose Pliers - 2430Gl Slim, semi-circular shaped and serrated jawsl Cuts softer material such as copper and plastic insulated wirel Equipped with a return spring featuring on/off functionl Tips give good grip and improved accessibility in confined spaces
140mm - 011FAR 160mm - 011FAT 200mm - 011FAV
Ergo® Snipe Nose Pliers - 2427Gl As 2430G type but tips are angled at 60o
160mm - 011FAC 200mm - 011FAE
Vise-Grip® Locking Wrenchl The original and the bestl Special tooth design that will hold from any anglel Special alloy steel keeps teeth sharp & prevents slipping
Wire Twisting Pliers
Length - mm Max Wire - mm FWB Code
170 0.5 -241 0.5 008VEZ
Fencing Pliers - 3866l Heavy dutyl Hammers & draws staples, strains, twists & splices wire
021PFD
Inomic Pliersl The truly unique pliers for fatigue-free workl Angles by 23o to form an optimum extension to the hand & arm
without bending the wristl All fingers act simultaneously and in parallel, enabling 25% more
force to be exertedl Ergonomic soft-grip zonel 180mm Combination Plier or 180mm Needle Nose Plier available
Automatic Lock Grip Pliersl Automatically clamps to any size without adjustmentl Adjustable clamp strength l One hand unlockingl Forged chrome/molybdenum constructionl 8”, 10” & 7” Long Nose available
Ergo® Flat Nose Pliers - 2421Gl Slim flat jaws on rectangular section, serrated to give sure grip
on the workpiecel Equipped with a return spring featuring on/off functionl Tips give good grip and improved accessibility in confined spaces
140mm - 011EZL 160mm - 011EZN 180mm - 011EZP
Long SnipeNose Plier
MultigripPlier
Bent SnipeNose Plier
Ergo® Flat NosePliers - 2421G
Description7LW 7”/175mm, capacity 11-19mm
10LW 10”/250mm, capacity 28mm
Ergo® Snipe NosePliers - 2427GErgo® Snipe Nose
Pliers - 2430G
27
Sn
ips
& S
he
ars
SNIPS & SHEARS
Snips & Shears
Aviation Snip Right Cut
Aviation SnipLeft Cut
Aviation SnipStraight Cut
Aviation Snips
Jewellers Snips
Heavy-Duty Crank-Handled Shears
General Purpose Snips
Medium-Duty Straight-Handle Shears
SNIPS & SHEARS
Aviation Snip Left Cutl For short, straight & curved cutsLength: 240mm Opening: 40mm
027DSE
Aviation Snip Right Cutl For short, straight & curved cutsLength: 240mm Opening: 40mm
027DSC
Aviation Snip Straight Cutl For short, straight & curved cuts with a large radius in both
left & right directionsLength: 240mm Opening: 44mm
027DSA
Aviation Snipsl Precision-formed blades for longer cutting lifel Ergonomically designed over-moulded soft-grips
Description FWB Code
Aviation Snip 101, Left & Straight Cut 009ZTB
Aviation Snip 102, Right & Straight Cut 009ZTC
Aviation Snip 103, Straight & Wide Curves 009ZTD
Jewellers SnipsDescription FWB Code
7” Straight Blade 009ZME
7” Curved Blade 009ZMF
Heavy Duty Cranked-Handle Shears
General Purpose Snipsl Also available with curved blade
Description FWB Code
8”/200mm 009ZRA10”/250mm 009ZRB12”/300mm 009ZRC14”/350mm 009ZRD
Medium-Duty Straight-Handle Shears12”/300mm - 027ZTH
Description FWB Code
11” Left-Handed 009ZOA
11” Right-Handed 009ZOC
BOLT CUTTERS
BOLT CUTTERSBolt Cutters
Bo
lt C
utt
ers
28
Heavy Duty Bolt Cutters - Centre-Cutl Centre-cut high tensile, drop-forged handles
Description FWB Code
14” Cam Adjustment 009QNA18” Cam Adjustment 009QNB24” Cam Adjustment 009QNC30” Cam Adjustment -36” Cam Adjustment -14” Arm Adjustment 009QPA18” Arm Adjustment 009QPC24” Arm Adjustment 009QPD30” Arm Adjustment 009QPF
36” Arm Adjustment 009QPG42” Arm Adjustment 009QPJ
Heavy Duty Bolt Cutters - End-Cutl End-cut high tensile, drop-forged handles
24”/610mm - 009QPE
Medium Duty Compact Cutter9”/225mm - 009QNM
Also Available:Replacement Jaws
Bolt-Gripl A unique reverse spiral flute design securely grips & removes
rounded-off, rusted tight or painted-over nuts & bolts - both metric & imperial
l Works with most tools
Description FWB Code
5-Piece Base Set: 3/8”, 7/16” (11mm), 1/2”,9/16” (14mm), 5/8” (16mm) 009ZTE
5-Piece Expansion Set: 5/16” - 8mm, 10mm, 13mm, 11/16”, 3/4” - 19mm 009ZTG
7-Piece Powergrip Set: 3/16” - 1/2”, -
5-Piece Speciality Set: 3/4” (19mm), 13/16” (21mm),7/8” (22mm), 15/16” (24mm), 1” -
Heavy Duty BoltCutters - Centre-Cut
Heavy Duty BoltCutters - End-Cut
Medium Duty Compact Cutter
Bolt-Grip
29
Mu
lti-
To
ols
MULTI-TOOLS
FuseTM
LT425
KickTM
LT400
Wave®
LT650
Multi-Tools
SurgeTM
LT850
MULTI-TOOLS
Wave® LT650l The best-selling multi-tool, manufactured from stainless steel, to
meet all of your day’s challenges l Supplied in a black leather sheath
Comprises: Needlenose pliers, Regular pliers, Wire cutters, Hard-wire cutters, All locking implements, Clip-point knife, Serratedknife, Saw, Scissors, Wood/metal file, Diamond-coated file, Large bitdriver, Small bit driver, Large screwdriver, Ruler (8”/19cm),Bottle/can opener, Wire stripper, Lanyard ringClosed Length: 10cm (4”)Weight: 241g (8.5oz)083FAS
The Multi-tools featured on this page are all protected under theLeatherman’s 25-year warranty.
SurgeTM LT850l A multi-tool powerhouse, with new, stronger jaws for cutting larger
hard and regular wire l Supplied in a black leather sheath
Comprises: Needlenose pliers, Regular pliers, Wire cutters, Hard-wire cutters, Stranded-wire cutters, All locking implements,Clip-point knife, Serrated knife, Electrical crimper, Large bit driver,Blade exchanger, Scissors, Small bit driver, 5/16” screwdriver, Awlw/thread loop, Ruler (9”/22cm), Bottle/can opener, Wire stripper,Lanyard ringClosed Length: 11.5cm (4.5”)Materials: 100% Stainless steelWeight: 355g (12.5oz)083FAX
FuseTM LT425l Slim chassis l Locking blade system l Zytel® handle inserts l Supplied in a black leather sheath
Comprises: Zytel® contoured handle grips, Needlenose pliers,Regular pliers, Wire cutters, Hard-wire cutters, All locking implements, Clip-point knife, Scissors, Large screwdriver, Small screwdriver,Phillips screwdriver, Ruler (8”/19cm), Bottle/can opener, Lanyard ring,Wire stripperClosed Length: 10cm (4”)Materials: 100% Stainless steelWeight: 170g (6oz)083FAN
KickTM LT400l A slim multi-tool offering less weight on the hip, but with the same
full-strength body & stronger pliers as on FuseTM
l Zytel® handles ensure a firm & comfortable grip l Supplied in a black leather sheath
Comprises: Zytel® contoured handle grips, Needlenose pliers,Regular pliers, Wire cutters, Hard-wire cutters, All-locking implements, Clip-point knife, Large screwdriver, Wire stripper, Small screwdriver,Phillips screwdriver, Ruler (8”/19cm), Bottle/can opener, Lanyard ringClosed Length: 10cm (4”)Materials: 100% Stainless steelWeight: 147g (5.2oz)083FAL
FOLDING KNIVES
FOLDING KNIVES
Leatherman has applied its unbeatable brand of versatility and innovation to folding knives, adding usefulness, saving space and
providing excellent value
Classic Liner Lock Knife - LTe300l A classic linerlock with a couple of surprises. Leatherman’s
Blade LauncherTM knife deployment mechanism & disappearing carabiner clip that doubles as a bottle opener
l Rubber handle inserts for sure gripl Plain edge 420 HC stainless steel blade
Closed Length: 9.7cm (3.875”)Weight: 86g (3.0oz)083FAB
Skeletonized Liner Lock Knife - LTe302l Skeletonized glass-filled nylon handles contain a 420 HC stainless
knife & Leatherman’s unique rotating carabinerl Even more usefulness is provided in the form of a Phillip’s
screwdriver and a 1/4” flat screwdriverl Also includes a removable pocket clip.
Closed Length: 9.7cm (3.875”)Weight: 111g (3.9oz)083FAE
Aluminium Liner Lock Knife - LTc302l The ultimate combination of form & function l Sleek, aluminium handle & 420 HC straight-edge stainless steel
bladel Unique rotating carabiner/bottle opener l Removable pocket clip & patent-pending
Blade LauncherTM technology
Closed Length: 10cm (4”)Weight: 90.7g (3.2oz)083FAD
Classic Liner LockKnife LTe300
Skeletonized Liner Lock Knife LTe302
Aluminium Liner Lock Knife LTc302
Knife Law 2007
Would our customers please note the following:
Possession in a Public Place:It may be an offence under the Criminal Justice Act to carry a
bladed or sharply pointed instrument in a public place, unless goodreason can be given for carrying same.
Exemption:Folding pocket knife with a cutting edge less than 3” (non locking)
Kn
ive
s3
0
Folding Locking Utility Knifel Quick, easy blade change mechanisml Thumb cushion l Comfort grip handlel Storage compartment with spring release for spare blades
Length: 160mmBlade Length: 28mm027DVA
Folding Locking Utility Knife
Toucan Electrican’s Knifel 1 straight hollow ground blade for general purpose usel 1 short curved blade designed specifically for cablesl Safety lock on each blade
Toucan Electrican’s Knife
31
Kn
ive
sRETRACTABLE KNIVES
Retractable Knives
ProTouch Retractable Knife
Standard Retractable Knife
Self-Retracting Knife
DynaGrip Retractable Blade Knife (0-10-799)
99E Original Stanley Retractable Blade Knife (0-10-099)
FatMax® Retractable Blade Knife (0-10-777)
Quickslide Retractable Pocket Knife (0-10-810)
Instant Change Retractable Blade Knife (1-98-456)
RETRACTABLE KNIVES
ProTouch Retractable Knifel ProTouch grip for excellent controll Ergonomic form l Internal blade storage for up to five blades
009ZTJ
Standard Retractable Knifel Supplied with 3 x Bi-Metal Blue Blades
Self-Retracting Knifel Spring return shuttle retracts the blade at the end of a cutting action
to minimise risk of injuryl Supplied with Bi-Metal Safety Blades
FatMax® Retractable Blade Knife (0-10-777)l Articulated body that allows rapid blade changing without toolsl Light resistant aluminium bodyl Blade dial locking wheel for optimum securityl Dynagrip biomaterial handlel Optimum ergonomics and holdingsl Incorporated blade holder (capacity of 7 blades)l Length: 165mm
Instant Change Retractable Blade Knife (1-98-456)l Ergonomic bi-material body for precise guiding of the cut & comfortl Strong metal bodyl Integrated wire stripperl Quick blade changel 8 blade storage holderl Anti-sliding support for thumb
017VXA
Quickslide Retractable Pocket Knife (0-10-810)l Sliding button operation for easy blade retractionl Fast blade change mechanism - no tools requiredl All metal construction with riveted belt clip
017BGB
DynaGrip Retractable Blade Knife (0-10-779)l Articulated body that allows rapid blade changing without toolsl Light resistant aluminium bodyl Blade dial locking wheel for optimum securityl Length: 150mm
017BFK
99E Original Stanley Retractable Blade Knife (0-10-099)The one and only Stanley knifel Interlock nose firmly secures blade into knifel Precision die cast zinc body is both strong and lightweightl 5 blade positions allows wider usage for variety of cutting applications l Blade holder inside the handle l Length: 155mm
017BEP
FIXED BLADE & SNAP-OFF KNIVESK
niv
es
32
FIXED BLADE KNIVES
ProTouch Fixed Knifel All the benefits of the ProTouch Retractable Knife, but with a
fixed blade.
009ZTK
Standard Fixed Knifel Supplied with 3 x Bi-Metal Blue Blades.
ProTouch Fixed Knife
Standard Fixed Knife
FatMax® Fixed Blade Knife (0-10-799)l Fine metal body for precise guidance during the cutl Bi-material soft grip handlel Rapid blade changing without toolsl Blade holder incorporated into the handlel Length: 150mm
017BFK
199E Fixed Blade Knife (2-10-199)l Zinc alloy body with a grooved surface for comfortable, assured
holdingl Interlock system to block the blade laterally even during difficult cutsl Blade holder inside the handlel Knife supplied with an assortment of 5 blades
017BET
FatMax® XLTM Knivesl Extra large design for gloved handsl Die cast aluminium body for strength and lightnessl Storage for 20 blades/Supplied with 10 blades
(excluding 25mm Snap-off)l Fixed (5-10-818) & 25mm Snap-off (5-10-820) also available
Retractable (5-10-819) - 017BGH
Fixed Knives
SNAP-OFF KNIVES
FatMax® Snap-Off Knife (9-10-421)l Textured die cast metal construction for positive slip-resistant grip in
rough environments l Slim design for ease and controll Cast metal body for strength and durabilityl Convenient built-in blade snapper and pocket clip for quick blade
change
FatMax® Fixed Blade Knife (0-10-799)
FatMax® Snap-Off Knife (9-10-421)
Fixed (5-10-818)
Retractable (5-10-819)
25mm Snap-Off (5-10-820)
FatMax® XLTM Knives
199E Fixed Blade Knife (2-10-199)
33
Kn
ive
sREPLACEMENT BLADES
Bi-Metal Blue Blades
Bi-Metal Safety Blades
1992 Flooring Blades UK (4-11-943) & 25mm Snap-Off Flooring Blades (5-11-329)
Snap-Off Knife Blades- 18mm (0-11-301)
Fixed Blade Knives Saw Blades
Snap-Off Insulation Blades - 25mm (5-11-327)
Snap-Off Knife Blades- 25mm (0-11-325)
1991 Paper Blades UK(4-11-938)
1992 Utility Blade
1996 Roofing BladesUK (4-11-939) & 25mm
Snap-Off RoofingBlades (5-11-328)
1992 PlasterboardBlades UK (4-11-937)& 25mm Snap-Off Plasterboard Blades(5-11-326)
Replacement BladesREPLACEMENT BLADES
Bi-Metal Blue Blades l Blades last up to three times longer than traditional carbon steel
blades, and are unbreakable under normal working conditionsTough, durable edge, honed for maximum sharpness
l 100 pack also available
5 pack - 009ZTL 10 pack - 009ZTM 50 pack - 009ZTN
Bi-Metal Safety Bladesl BladeAll the benefits of Vi-Metal Blue Blades, but with snub nose to
reduce the risk of accidental puncture woundsl Ideal for Self Retracting Knife.l Available in: 5 & 50 packs
1991 Paper Blades UK (4-11-938)l Paper, fabric, cartons, nylon strapping, shrink wrapping film,
polystyrene, adhesive tapel 10 pack
1992 Flooring Blades UK (4-11-943) & 25mm Snap-Off Flooring Blades (5-11-329)l Foam base carpet, re-inforced base carpet, coco fibre, linoleum,
cork (phonic insulation and foam), PVC self adhesive floor tilesl 10 pack
1992 Plasterboard Blades (4-11-937) & 25mm Snap-Off Plasterboard Blades (5-11-326)l Ceiling, plasterboard and sealing tapel 10 pack
1996 Roofing Blades (4-11-939) & 25mm Snap-Off Roofing Blades (5-11-328) l Roofing material, polystyrene panel/boards, tar & aluminium
insulation material, insulation adhesive tape and foaml 8 pack (Roofing blades)l 10 pack (Snap-off blades)
Snap-Off Insulation Blades - 25mm (5-11-327) l 10 pack
1992 Utility Bladel Heavy duty, general purpose bladel Ideal for carpet, vinyl and any other material requiring a stiffer
and stronger bladel 19mm utility blade
5 pack (1-11-921) - 017BHCC10 pack (2-11-921) - 017BHD
Snap-Off Knife Blades - 18mm (0-11-301)l Snap-off blade knife bladesl 7 breakable blade segmentsl Reinforced thickness: for intensive usel Replacement blade dispenser with blade breaker system and
storage of used segments
10 pack - 017BGX
Snap-Off Knife Blades - 25mm (0-11-325)l 10 pack
Fixed Blade Knives Saw Bladesl For use in restricted areas or for curved shapesl Will fit 10-220, 10-010, 10-199, 10-019, 10-550 Stanley knives l 10 packsl Wood Cutting Blade (0-15-276) also available
Metal Cutting Blade (0-15-277) - 017BMLB
Sa
ws
34
HAND SAWS
Hand Saws
Irwin Plus
Jab Saw (Drywall)
22” Ergo® SuperiorHandsaw
Handsaw - 244
20” Ergo® SuperiorLaminator Handsaw
25” Concrete Saw - 255
Handsaw - 244P
14” General Purpose Saw 300
Folding Saw 396-LAP/HP
Coping Saw
Fret Saw 302
HAND SAWS
Irwin Plusl Razor sharp, double-ground teeth that curl in both the push
& pull stroke, for cutting with less effortl High quality steel bladel Ergonomically designed, two-component soft-grip handle
Also Available:XPERT Triple-Ground Range
PTFE-Coated Range
Jab Saw (Drywall)l Premium quality jab saw, punches a hole into plasterboard
prior to sawing.
009ZBG
Description FWB Code
Cross Cut 770, 22”/550mm HP 7T/8P 009NBZUniversal 880, 20”/500mm HP 7T/8P 009NDEUniversal 880, 22”/550mm HP 7T/8P 009NDF
Universal Fine 990, 22”/550mm HP 9T/10P 009NDXUltra-Fine Tenon 1360, 10”/250mm HP 12T/13P 009NFWUltra-Fine Tenon 1360, 12”/300mm HP 12T/13P 009NFXUltra-Fine Floorboard 1300, 13”/325mm 12T/13P 009NFAUltra-Fine Toolbox 99U-J, 13”/335mm 12T/13P 009NBA
22” Ergo® Superior Handsaw - 2700l Professional handsaw for coarse or thick materials with Ergo®
handlel Unique XT toothing, 7TPI and thick blade give high precision
and straight cuttingl Hard point teeth for lasting sharpness
20” Ergo® Superior Laminator Handsawl Cuts laminate and wooden flooringl Unique XT toothing and thick blade give high precision and
straight cutting with good stability and comfort
25” Concrete Saw - 255l For lightweight cellular concrete blocksl Extra long blade, equipped with cemented-carbide
010MOP
Handsaw - 244l For medium thick wood materialsl Hard point, universal bevel ground teeth for cutting along as well
as across the grain
20” - 011DJU 22” - 011DJV
Handsaw - 244Pl For medium thick wood materialsl As 244 Handsaw but with extra thick bladel 20” & 22” available
14” General Purpose Saw - 300l A fleam toothed toolbox saw with very fine hard-point teeth
for smooth sawingl Ideal for aluminium, plastics, laminates, wood and chipboard
011DLJ
Folding Saw 396-LAP/HPl 369HP suitable for green and dry wood, plastic, etcl 396HP suitable for professional fruit growers for pruningl XT toothing, 7TPIl Features safety lock for locking the blade in open and closed
positions
Coping Sawl For fine precision work and sawing wood and plasticsl Nickel plated steel frame, beech wood handlel Interchangeable blade fitted on retaining pins, turnable 360o,
14TPI
Fret Saw - 302l Flat, plated steel frame with beech wood handlel Fitted with a blade for wood working l Cutting depth 300mm/12”
35
Sa
wsHACKSAWS
HacksawsHACKSAWS
Hand Hacksaw - 317l Slim design improves access in confined spacesl Alternative 90o blade mounting makes flush cutting possiblel Supplied with Sandflex® Bi-metal hacksaw blade 24TPI
(see page 36)
Hand Hacksaw - 319/325 Ergo®
l Frames allows very high blade tension for straight, accurateand exact kerfs
l Alternative 55o blade mounting makes flush cuttingl Supplied with Sandflex® Bi-metal hacksaw blade 24TPIl Also available as 325 with Ergo® handle
319 - 010MPK 325 Ergo® - 010MPT
Mini Hacksaw - 208l Useful for difficult to reach positionsl Supplied with 250mm/10” Sandflex® Bi-metal blade 24TPI
Junior Hacksaw - 268/239l Practical and simple blade tensioning screwl Supplied with 150mm/6” Sandflex® 32TPI blade for metal workingl Blades also availabe seperately268 - 011DKS
Hand Hacksaw - 317
Hand Hacksaw - 319 Ergo®
Hand Hacksaw - 325 Ergo®
Mini Hacksaw - 208
Junior Hacksaw- 268
Junior Hacksaw- 239
HACKSAW BLADES & BOWSAWS
HACKSAW BLADES
Sa
ws
36
Sandflex® Bi-Metal - 3906l Virtually unbreakable and shatterproof bi-metal blade with
precision ground teeth for metal sawingl Extreme cutting performance and wear resistance with a high
degree of flexibilityl 18, 24, 32 TPI availablel Size 300(L) x 13(W) x 0.65mm(T)
18 TPI - 001NNC 24 TPI - 001NND 32 TPI - 001NNE
Sandcut Blade - 3805l Hardened high speed steel with blue rust protective coatingl Suitable for various sawing, even hard to cut materialsl Recommended for use with a screw vicel Size 300(L) x 13(W) x 0.65mm(T)
High Speed Power Hack Blade - 3802l Designed for cutting almost any materiall Suitable for use on modern machines with a high degree of controll Sizes range from 300(L) x 25(W) x 1.25mm(T)
to 450(L) x 45(W) x 2.25mm(T)
Codes Start: 001MOB
Sandflex® Power Hack Bi-Metal Blade - 3809l Virtually unbreakable and shatterproof to withstand high feed
pressures giving accurate, fast cutting ratesl Suitable for use on any materiall Sizes range from 300(L) x 25(W) x 1.25mm(T)
to 350(L) x 38(W) x 2mm(T)
Codes Start: 001NOA
Sandflex®
Bi-Metal- 3906
SandcutBlade- 3805
High Speed Power Hack Blade - 3802
Sandflex® Power Hack Bi-Metal Blade -3809
Hacksaw Blades
Bow Saws
Ergo® Bow Saw 10
BOW SAWS
Ergo® Bow Saw - 10l Heavy duty saw made from high quality steell Designed for tough environmentsl Lightweight for easy handlingl High blade tension for straight cuttingl Ergo® handle with knuckle protection for comfort and safety
24” - 010MMN 30” - 010MMP
21” Bow Saw - 331l Small and handy for all round usesl Ideal for use in tight spaces, useful for both pruning and
roofing workl Complete with type 51 blade for butting both dry and green wood
010MPZ
21” Bow Saw - 331
37
Pry
Ba
rs
PRY BARS
FatMax® Fubar II (9-55-119)l 35oz lighter weightl One piece forged carbon steel barl Serrated gripping jawl Textured gripl Multi function hammerl Nail puller and pry barl Fits in hammer loop
FatMax® XLTM Fubar 64oz (9-55-099)l 4-in-1 tool for prying, splitting, board bending and striking jobsl Textured rubber grip for comfort and control
FatMax® Wonder Barsl Heat treated for extra toughness, forged high carbon alloy steell Polished tips and bevelled nail slotsl 14” Wonder Bar, 21” Wonder Bar & Super Wonder Bar 16”
FatMax® Demolition Barsl Tri-lobe design for increased strength and durabilityl Forged high carbon steel designed to withstand 975ft-lbs of
bending momentuml 14”, 24” & 36” FatMax® XLTM
Fubar 64oz (9-55-099)
FatMax®
Fubar II (9-55-119)
FatMax®
Demolition Bars
FatMax®
Wonder Bars
Pry Bars
Roll Head Pry Barsl Forged from high quality chrome alloy steel with a red powder
coated finshl Roll head acts as a fulcrum increasing the level of leverage
which can be appliedl Used extensively in the automotive industry for leverage
and location, particularly on brake assemblies
Length - mm Shank Diameter - mm FWB Code
150 8 -
300 11 008OVC413 143 -
Screwdriver Pry Barl Powerful square section blade significantly reduces the spring
effect often encountered with this style of pry barl Screwdriver style gives comfortable grip and significantly
enhances the leverage which can be appliedl 175, 300, 450, & 600mm availablel Also available: 3-piece set - 175mm, 300mm, 413mm
Roll Head Pry Bars
Screwdriver Pry Bar
PRY BARS
PUNCHES & COLD CHISELS
Pu
nc
he
s &
Co
ld C
his
els
38
PUNCHES
5-Piece Punch Setl Heavy duty set with comfort grip shock-absorbing handles
for positive grip and maximum comfortl Contains 5 parallel punchesLengths/widths: 210,8, 205/6, 180/5, 170/3
2-Piece Automatic Centre Punch Sets
2-Piece Automatic Centre Punch Setl User adjustable impact strengthl Tips machined from S2 steell Brass knurled body for a comfortable secure gripLengths (mm): 125,150
008PYOJ
5-PiecePunch Set
Standard Drift Punchesl Featuring tri-material shock absorbing, anti-vibration handlel Maximum comfort and safetyl Differentially hardened for a soft striking cap and a hardened
working endl Sizes available range from 1.9 - 9.9mm
Codes Start: 016RDN
Brass/Polyamide/Aluminium Drift Punch 19-Piece Setl Contains: Tri-material anti-vibration handle, plus brass,
polyamide and aluminium interchangeable punch tips & extensionsl Sizes available range from 10 - 20mm
Drift Punch 15-Piece Setl Contains: Tri-material anti-vibration handle, plus brass and steel
drift and nail interchangeable punch tipsl Sizes available range from 3 - 8mm
016AZR
Installation Punch 5-Piece Setl Tri-material anti-vibration handlel Brass and polyamide interchangeable tipsl Sizes include 25 & 30mm
016RCT
DynaGrip Nail Setsl Elastomer handle for good hand gripl The nail punches are 25% longer, to reach less-accessible placesl Long bevelled point for better alignmentl Set: 0.8mm, 1.6mm, 2.4mm
Punches
Standard DriftPunches
Brass/Polyamide/Aluminium Drift Punch 19-Piece Set
Drift Punch15-Piece Set
InstallationPunch 5-Piece Set
DynaGrip NailSets
FatMax®
Cold Chisels
4-PieceCold Chisel Set
COLD CHISELS
4-Piece Cold Chisel Setl Heavy duty chisel set with comfort grip shock-absorbing
handles for positive grip and maximum comfortl Lengths/widths: 225/25, 200/20, 190/15, 180/5
FatMax® Cold ChiselsIncreased strength and durability for designated tasks from chipping and shapingl Bi-material handguardsl Stanley blade holds its edge longerl Modified parabolic striking end
Description FWB Code
Cold 1” x 12” - Long 017BMQKMason’s 1 3/4” x 8 1/2” 017BMQLMason’s 2 3/4” x 8 1/2” 017BMQM
Floor 3” x 11” -Brick Set 3” x 8 1/2” 017BMQEBrick Set 4” x 8 1/2” 017BMQFConcrete 3/4” x 12” 017BMQG
Electrician’s 2 1/4” x 10” 017BMQH
Cold Chisels
39
Me
ch
an
ica
l P
ull
ers
PULLERS & STUD EXTRACTORS
MECHANICAL PULLERS
Stud Extractor Set - 1435/8l Supplied in plastic case l 5-piece set extracts studs M3 to M18l 8-piece set extracts studs M3 to M45
5-piece - 011EGH8-piece - 011EGI
3/2 Leg Internal & External Puller - U.306PBl Innovative fast fit & fast reversal system l 3 tonne pulling power l External spread: 7-140mm l Internal spread: 23-130mml Reach: 147mm l Supplied with internal/external legs
Internal - 016JLRExternal - 016JLN
Wide Leg Pullers - U.301l Quick fit - easy install system l Self tightening n Self centringl Dual load limiters to prevent overloading
Hydraulic Puller Kitl Powerful, 10 ton hydraulic ram l Versatile 2 or 3 way beaml Takes only 20 pumps to reach maximum travel (75mm)l Safety overload system to prevent injury by overloading l In plastic storage case l Complete with 3 sets of legsl Also available with four legs: U.312HJ4
STUD EXTRACTORS
Stud Extractor Set - 885l For fast and simple extraction of studs and broken fasteners l Includes drill bits, splines & hex drive nuts l For left & right hand threads
Twin/Triple Hydraulic Puller Kitsl Powered by the now famous 1500 Series hydraulic raml Combination twin/triple leg puller kits, complete with ram extensionsl Wide range of applications
Concentric Easy Pullersl The first 2/3 way manual easy puller in the world, which brings users
the two in one model as the best option to save moneyl User convenience raised from screw operated & self positioning jaws,
locking on the part (needs 1 hand operation only)l 3 and/or 2 fixed jaws for easy positioning & centring preventing
damage to shaft l Available in 5 sizes, 2, 3, 5, 8 & 10 ton l Self locking jaws eliminate the puller jaw slipping off under loading
Self Grip Adjustable Pullersl Range of pullers with spreads of 80, 150 or 200mm l Chrome finishl Self gripping & self centring l Practical: legs can be added or removedl Range of accessories provides total versatility
Autogripl Legs are secured by locknut l Self gripping & self centring l Chrome finish l Pin shears if torque limit is exceeded l Legs can be added or removed
HYDRAULIC PULLERS
Puller Kits 8 Tonnes - Standard Leg l Twin/triple leg puller, powered by 1500 Series ram l C/w metal box
Ref Spreadmm
Reachmm
External Reachmm
Specification
15500000 150 150 50Contains components
to make up to 4 different pullers
15500800 200 200 50/100Contains components
to make up to 6 different pullers
Hydraulic Nut Splitterl Removes seized nuts without damaging threadsl Allen key hex drive, 20 or 33mm capacity availablel Replacement cutters available separately
Universal Circlip Tooll T-bar handle with screw action for precise controll Use for internal & external applicationsl Supplied with 4 pairs of interchangeable tips in 2.29, 3, 3.81 & 4.32mm
diameter (also available individually)
Mechanical Pullers
Hydraulic Pullers
Stud Extractors
Autogrip
Puller Kits 8 Tonnes -Standard Leg
Universal Circlip Tool
Stud Extractor Set- 885
HydraulicPuller Kit
Wide Leg Pullers- U.301
3/2 Leg Internal & External Puller - U.306PB
ConcentricEasy Pullers
Self Grip Adjustable Pullers
Twin/TripleHydraulic Puller Kits
HydraulicNut Splitter
Stud Extractor Set 1435/8
ENGINEERS FILES
Fil
es
40
ENGINEERS FILES
Hand Filesl For filing flat surfaces, sharp corners and shoulders as well
as for deburringl Useful for the sharpening of heavy implementsl High removal ratel Available with handles or unhandled
mm inFWBCode mm in
FWBCode mm in
FWBCode
100 4 002MOH 100 4 002MOG 100 4 002MOF150 6 002MPC 150 6 002MPB 150 6 002MPA200 8 002MPF 200 8 002MPE 200 8 002MPD250 10 002MRA 250 10 002MPH 250 10 002MPG
300 12 002MRD 300 12 002MRC 300 12 002MRB350 14 002MRG 350 14 002MRF 350 14 002MRE
Size
Bastard Cut
Size
Second Cut
Size
Smooth Cut
Three Square Filesl For deburring and filing angles and internal cornersl For filing of holes and large fillets as well as concave surfacesl Tapered surface makes it ideal for flat filingl Available with handles or unhandled
mm inFWBCode mm in
FWBCode mm in
FWBCode
100 4 002NPB 100 4 002NPA 100 4 002NOH150 6 002NPE 150 6 002NPD 150 6 002NPC200 8 002NPH 200 8 002NPG 200 8 002NPF250 10 002NRC 250 10 002NRB 250 10 002NRA300 12 002NRF 300 12 002NRE 300 12 002NRD
Size Size Size
Bastard Cut Second Cut Smooth Cut
Warding Filesl For filing narrow grooves and passages etc.l Particularly well situated for filing cuts on keys
mm inFWBCode mm in
FWBCode mm in
FWBCode
100 4 002NSG 100 4 002NSF 100 4 002NSE150 6 002NTE 150 6 002NTD 150 6 -200 8 002NTH 200 8 002NTG 200 8 002NTF
Size Size Size
Bastard Cut Second Cut Smooth Cut
Flat Filesl Tapered shape enables the user to reach into angles and
corners more easily
mm in
FWBCode mm in
FWBCode mm in
FWBCode
100 4 002MMC 100 4 002MMB 100 4 002MMA150 6 002MMF 150 6 002MME 150 6 002MMD200 8 002MNA 200 8 002MMH 200 8 002MMG250 10 002MND 250 10 002MNC 250 10 002MNB
300 12 002MNG 300 12 002MNF 300 12 002MNE350 14 002MOB 350 14 002MOA 350 14 002MNH
Size
Bastard Cut
Size
Second Cut
Size
Smooth Cut
Round Filesl For filing holes, large fillets and concave surfaces
mm in
FWBCode mm in
FWBCode mm in
FWBCode
100 4 002MWB 100 4 002MWA 100 4 002MVH150 6 002MWH 150 6 002MWG 150 6 002MWF200 8 002MXC 200 8 002MXB 200 8 002MXA250 10 002MXF 250 10 002MXE 250 10 002MXD
300 12 002MZA 300 12 002MXH 300 12 002MXG350 14 002MZD 350 14 002MZC 350 14 002MZB
Size
Bastard Cut
Size
Second Cut
Size
Smooth Cut
Flat Files
Round Files
Warding Files
Three Square Files
Engineers Files
Hand Files
41
Fil
esENGINEERS FILES
ENGINEERS FILES Engineers Files
Half Round Filesl For filing concave and flat surfaces and large holesl Suitable for deburring work
mm inFWBCode mm in
FWBCode mm in
FWBCode
100 4 002MSE 100 4 002MSD 100 4 002MSC150 6 002MSH 150 6 002MSG 150 6 002MSF200 8 002MTC 200 8 002MTB 200 8 002MTA250 10 002MTF 250 10 002MTE 250 10 002MTD
300 12 002MVA 300 12 002MTH 300 12 002MTG350 14 002MVD 350 14 002MVC 350 14 002MVB
Size
Bastard Cut
Size
Second Cut
Size
Smooth Cut
Square Filel For filing grooves, rectangular holes, internal corners and for
fine-adjustment of cutting tools
mm inFWBCode mm in
FWBCode mm in
FWBCode
100 4 002NMB 100 4 002NMA 100 4 -150 6 002NMH 150 6 002NMG 150 6 002NMF200 8 002NNC 200 8 002NNB 200 8 002NNA250 10 002NNF 250 10 002NNE 250 10 002NND300 12 002NOA 300 12 002NNH 300 12 002NNG
Size Size Size
Bastard Cut Second Cut Smooth Cut
Knife Filel For filing narrow passages in cutting and punching, deburring
narrow grooves and flanks on gear teethl Size: 150mm (6”)
Bastard Cut - 002NVFSecond Cut - 002NVESmooth Cut - 002NVD
ENGINEERS FILE SETS
6” 3 Piece Ergo® File Setl Contains one hand, half round and round filel Second cutl C/w handles and a plastic roll-up wallet with tie
002OWH
5 Piece Ergo® File Setl Contains one hand, half round, round three square files and
a half round raspl Second cutl C/w handles and a plastic roll-up wallet with tie
8” Set - 002OWK10” Set - 002OWM
8” 5 Piece Ergo® File Setl Contains one hand bastard, hand second, square bastard,
half round bastard and round bastard filesl C/w handles and a plastic roll-up wallet with tie
002OWPEngineers File Sets
6” 3 Piece Ergo®
File Set
5 Piece Ergo®
File Set
8” 5 Piece Ergo®
File Set
Hand Round
3 Square Half Round
Warding Square
Flat Knife
File Shapes
Half Round Files
Square File
Knife File
NEEDLE FILES & FILE HANDLES
Fil
es
42
NEEDLE FILES
Needle Filesl For filling and polishing jobsl Ideal for engravers, precision engineers, instrument makers,
watchmakers and goldsmithsl Smooth Cut
14cm Flat - 002NZH16cm Flat - 002OMA14cm Hand - 002OMD16cm Hand - 002OME14cm Half Round - 002OMH16cm Half Round - 002ONA14cm Three Square - 002ONH16cm Three Square - 002OOA16cm Knife - 002OOE14cm Square - 002OOH16cm Square - 002OPA14cm Round - 002OPD16cm Round - 002OPE14cm Warding - 002OQA16cm Warding - 002OQC
Also Available:Sets & other cuts.
Please contact our Tools Department for details
FILE HANDLES
Flat Files Handlel Ergonomically designed plastic handles for an excellent gripl Suitable for files of rectangular shape (flat, hand , etc.) and
half round filesl The end covers the tang and shoulder for a safe and
comfortable grip
9-485-06-1P, 6” - 011CQM9-485-09-1P, 9” - 011CQO9-485-13-1P, 13” - 011CQPAlso available: Packs of 10
Shaped Files Handlel Ergonomically designed plastic handles for an excellent gripl Suitable for shaped files (round, square, three square, etc.) l The end covers the tang and shoulder for a safe and
comfortable grip
9-485-06-1P, 4” - 011CQS9-485-06-1P, 5” - 011CQUAlso available: Packs of 10
Safety Handles for Files l Complies with the Health and Safety at Work Act 1974l The ferrules are positively secured with a hidden spring which
takes the pressure when driving the file into the handlel Under normal conditions it is impossible to remove the ferrule,
unless the handle is deliberately brokenl The handles are made from finest quality timber
in mm in mm3-6 75-150 3 75 0 002PZA6-10 150-250 41/4 108 1 002PZB10-14 250-350 5 126 2 002PZC14-16 350-400 51/2 140 3 002PZD
File Length Handle Length HandleSize
FWBCode
Flat Files Handle
Shaped FilesHandle
Safety HandlesFor Files
Needle Files
File Handles