HAMMER UNIONS - Maximus Completion Systems™ Union/Hommer Union.pdf · HAMMER UNIONS Maximus...
Transcript of HAMMER UNIONS - Maximus Completion Systems™ Union/Hommer Union.pdf · HAMMER UNIONS Maximus...
HAMMER UNIONS
www.maximuscompletions.com
Maximus Completion Systems offers a comprehensive range of standard and
sour gas Hammer Unions. Each union is thoroughly inspected to ensure long,
dependable service in the most extreme conditions.
.
n Three lug nuts and self-locking ACME threads provide quick make-up
......and break-out
n Color coded for quick identification , Unique identification for sour gas
......unions
n Meet or exceed National Association of Corrosion Engineers standard
......NACE MR-01-75 and API RP-14E
n Manufactured from quality steel meeting ASTM and/or AISI standards
n All unions provide pressure-tight & positive sealing for low-pressure
......services (500 to 2,000 PSI)
n The spherical surface male sub and angular surface female sub form a
......metal-to-metal seal, the ball and tangent provides a perfect seal
n Range from 1/2" to 12" with cold working pressures from 500 to 20,000
......PSI
n Fully interchangeable with most major brands of Hammer Unions
M4570910lNOHSAS 18001-2007
HAMMER UNIONS
M4570910lNOHSAS 18001-2007
FIGURE 40
n Recommended for air, water,oil or gas to 400PSI
n Available in theraded
FIGURE 50
n Recommended for air, water, oil or gas service to 500 PSI
n Available in threaded
n Available in bronze, based on application
FIGURE 100
n Cold working pressure - 1000 PSI
n Low pressure union
n Manifold & general service
FIGURE 200
n Cold working pressure - 2000 PSI
n General purpose union
n Available in threaded & butt weld
FIGURE 206
n Cold workinng pressure - 2000 PSI
n O-Ring in metal sub sealing extends life
n Cup and cone provide “zero clearance against extrusion”
n Available in threaded & butt weld
n All sizes available in sour service
n Available socketweld unions in 2", 3", 4", & 6"
Fig. 40
Fig. 50
Fig. 100
Fig. 200
Fig. 206
www.maximuscompletions.com
HAMMER UNIONS
M4570910lNOHSAS 18001-2007
FIGURE 207
n Cold working pressure - 2000 PSI
n Manifold and blanking the end of line- ‘O’ ring cap
.....provides leak-free seal
n Connection cap can be tapped for pressure gauge orvalve .
n Available in threaded & butt weld
FIGURE 300
n Cold workinng pressure- 2000PSI
n ‘Flat Face’ design facilitates straight breakout of connected
.....components such as valve or fittings for repair or inspection
n Moderate vacuum service insulated unions available
FIGURE 400
n 2" to 4" sizes CWP is 4,000PSI
n 6" to 12" sizes CWP is 2,500PSI
n Mainly used for manifold pumping and mud pumping
FIGURE 602
n Cold working pressure- 6,000 PSI
n Lip type elastomer seal protects meal-to-metal designed to
.....reduce truculence in the line
n Usage manly in manifold and mud service
n Available with non-pressure thread sealing ends
FIGURE 1002
n Cold working pressure - 10,000 PSI
n Field replaceable lip type elastomer seal protects secondary
.....metal-to-metal seal
n 5" and 6" butt-weld are 7,500 PSI for standard service
n 5" and 6" butt-weld are 5,000 PSI for sour service
Fig. 207
Fig. 300
Fig. 400
Fig. 602
Fig. 1002
www.maximuscompletions.com
HAMMER UNIONS
M4570910lNOHSAS 18001-2007
FIGURE 1003
n Cold working pressure - 10,000 PSI
n Misaligning unions are used in high pressure applications
.....where the lines are not aligned
n 5" is 7,500 PSI for standard service
n 5" is 5,000 PSI for sour service
FIGURE 1004
n Cold working pressure- 10,000 PSI
n Field replaceable lip type elastomer seal protects secondary
.....metal-to-metal seal
n Available in forged steel for butt weld connections
n Schedule XXH
FIGURE 1502
n Cold working pressure - 15,000 PSI
n Field replaceable lip type elastomer seal protects secondary
.....metal-to-metal seal
n Used mainly in choke/kill lines, cementing, fracturing / testing
n Available in threaded, welded, butt weld and non-pressure
.....thread sealing ends
FIGURE 2202
n Cold working pressure- 15,000 PSI
n Field replaceable lip type elastomer seal protects secondary
.....metal-to-metal seal
n Used in sour gas services
n Meets Nace MR-01-75 standards
n Butt-weld Schedule XXH only
Fig. 1003
Fig. 1004
Fig. 1502
Fig. 2202
www.maximuscompletions.com