5/20/2018 Halliburton Otis W-Running Tool

1/2

The OtisW Running Tool sets the types C, B and W slip-type Otis

mandrels in the tubing.

The Otis W running tool consists of a top sub complete with shing neck and

sucker rod pin connection, a middle sub, a bottom sub, a collet set and an

inner core.

When the desired setting depth has been reached, the tools are picked up to set

the slips and expand the rubber element. Once set, the pin in the W running tool

can be sheared, the prong can be withdrawn from behind the collet, allowing the

running tool to release from the mandrel.

HALLIBURTON

Otis

W Running Tool

w.www.hunting-intl.com | e.well.intervention@hunting-intl.com

WIRELINE OPERATIONS: RUNNING TOOLS

Wireline Equipment Catalogue v.3.2 | Halliburton

OTISW RUNNING TOOL

NominalSize

1.250

1.500 to 1.750

2.000

2.500

3.000

3.500

4.000

MaximumSize (OD)

1.190

1.380

1.500

1.500

2.250

2.620

3.500

Fishing Neckon Tool

1.000

1.187

1.375

1.375

1.750

2.313

2.313

PartNumber

41W025

41W023

41W013

41W014

41W022

41W030

41W037

Connection

5/8 11 UN

15/16 10 UN

15/16 10 UN

15/16 10 UN

1 1/16 10 UN

1 1/16 10 UN

1 1/16 10 UN

The OtisW running tool consists of a topsub complete with shing neck and suckerrod pin connection, a middle sub, a bottomsub, a collet set and an inner core.

Fishing NeckWill Engage

0.531

0.687

0.812

1.000

2.000

1.875

2.812

Used toRun

Type B,

C and W

Mandrels

Spares components are available. Please specify part and assembly part number or part

number if known.

Otis, X, XN, R, RN, RPT and Slid ing Side-Door are registered trademarks of Halliburton.

5/20/2018 Halliburton Otis W-Running Tool

2/2