Haas Vertik Brochure

2

HIGH-PERFORMANCEVERTICAL MACHINING CENTERS

Whatever your requirements, there’s a Haas VMC to meet your needs. Travels range from 8" x 8" x 12" (xyz) for the diminutive Office Mill, up to 150" x 50" x 50" for the massive

VS-3, and the versatile VF series covers everything between. Table capacities range from 2 tons for our medium and large machines, up to 5 tons for the VS series.

The capabilities for Haas VMCs are as varied as the machine capacities, with many configurations available, including 40-taper, 50-taper, geared-head, high-speed, high-production, mold making machines and more. And the legendary Haas control makes every Haas VMC easy to operate. Built with the operator and programmer in mind, it’s packed with intuitive features you won’t find on any other CNC machining center.

Inside this brochure you’ll find all the latest technological advancements, new machine sizes and capabilities that Haas Automation has developed through constant research and ongoing product development.

Rigid foundation 4-5

Motion control 6-7

Spindle & spindle drive 8-11

Toolchangers 12-13

Chip removal & coolant systems 14-15

Distinctive machines 16

Operator convenience 17-19

Performance enhancements 20-21

Model variations 22-23

Rotary tables & indexers 24-25

The Haas control 26-33

Machine configurations & dimensions 34-35

Specifications 36-39

Office Mill

Mini Mill

Toolroom Mill

Mill/Drill Center

VF-1 & 2

VF-3, 4 & 5

VF-6 – 11

VF / 50-Taper

Gantry Router

Super Large

See model guide on pages 22-23.

MO

DE

LS

:

4

Massive Cast-Iron Construction

Rigid Foundation

Cast iron is more expensive to buy and machine, but it provides up to ten times the damping capacity of steel. That’s why Haas uses cast iron for all major components. Castings are reinforced internally with heavy ribs to resist flex and damp vibrations, and each casting is inspected thoroughly before and after machining to ensure it is free of flaws.

All structural componentsare optimized using finite element analysis (FEA) to produce the most rigid designs.

Specifications subject to change without notice. Not responsible for typographical errors.

Triangulated Wide-Stance Castings

Get out your tape measure and check the distance between leveling bolts. Measure the width of the column and the depth of the saddle. Then look inside the castings for the heavy-duty, vibration-absorbing ribs that Haas designs in. Now go measure the competition – you’ll find they just don’t measure up to a Haas.

5

Rigid, Cost-Effective Design Solutions.

1 Setup, 5 Sides –Surfaced, Drilled and Tapped

Haas base castings are machined on state-of-the-art, 5-side CNC machines. Each casting is machined, drilled, tapped and inspected in a single setup to provide higher accuracies and smoother production. Our ability to precisely machine all critical features of each casting eliminates alignment errors in final assembly. High-accuracy in-process inspection guarantees that every casting meets our stringent quality standards.

Anti-Flex, Reinforced Base & Column Castings

Our specially designed base and column castings feature anti-flex, vibration-absorbing ribs that transfer vibrations away from the cutting area. The columns feature an internal torque-tube configuration that yields superior rigidity and provides the most anti-flex properties of any design.

Innovative Designs and High-Accuracy Processing Yield a 20%

increase in machine rigidity.

Motion Control

Double-Anchored Ballscrews

Haas uses only premium-quality ballscrews and guides from the world’s top manufacturers. Although more expensive, their premium quality is the only way to achieve the high accuracy and long life that our customers demand. Ballscrews are anchored at both ends and inspected for 100% parallelism to the axis guides. Preloaded ball nuts eliminate backlash.

When absolute positioning accuracy is necessary, linear scales are the only way to ensure exact axis positioning under fluctuating temperatures. Linear scales ensure positioning accuracy along X, Y and Z axes by compensating for the thermal variations inherent in all machine tools. With a 1-micron resolution, these scales deliver the extreme

accuracy required for mold making and other high-precision machining applications.

(Available on VF-1 through VF-11.)

Linear Scales

100% Ballbar TestedHaas uses a state-of-the-

art ballbar test to check the linear accuracy and geometry of every machine.

This test is done with a bar that tracks machine movement to ±0.5 micron, with a 0.1-micron resolution. The bar is attached to the spindle and to a fixed point on the table. The machine is then put through a series of circular moves to certify synchronous movement and verify machine squareness.

Data from the ballbar is fed into a computer that plots a chart illustrating machine accuracy. Any deviations in squareness or accuracy show up as distorted circles that are very easy for a technician to spot. A copy of this chart ships with each Haas VMC as assurance that the machine is accurate and properly aligned.

6

Electronic Thermal Compensation System

When ballscrews rotate, they generate heat, which can cause them to expand. With high duty cycles, ballscrew growth can lead to cutting errors. Our electronic thermal compensation (ETC) algorithm accurately models this heating effect and compensates for screw position.

Automatic LubricationThe Haas automatic lubrication system meters

and distributes oil to guideways and ballscrews as the machine operates. This ensures that all critical components are lubricated with the correctamount of oil at all times,saving time and reducingmaintenance costs.

BrushlessServomotors

Haas uses state-of-the-art brushless servomotors that offer more torque in a smaller frame than almost any other motors available. These high-performance servos provide more power for heavy cuts, and higher acceleration/deceleration rates to reduce cycle times. High-resolution encoders and closed-loop digital feedback ensure ultra-precise positioning.

Haas Direct-Coupled Servomotors

Our servomotors are coupled directly to the ballscrews with steel disc couplings to eliminate windup, even under severe loading. This greatly improves positioning accuracy, and provides more accurate threading and contouring. And they don’t wear out or lose accuracy over time.

Recirculating Ball Guideways Outperform Box Ways

Recirculating ball guideways are preloaded to provide zero clearance between the moving surfaces. This increases rigidity and stiffness in all directions, while providing higher accuracy and reliability. Box ways require clearance between the moving surfaces in order to operate. Recirculating ball guides have a very low coefficient of friction, allowing faster movements without sacrificing repeatability or positioning accuracy. Box ways have a high coefficient of friction, resulting in stick-slip effects that can lead to machine errors.

Recirculating Ball GuidewaysHaas uses recirculating ball guideways

for each axis of every VMC. These guideways are preloaded for zero clearance, and provide full load-carrying capacity in all directions. They consume less power, do not require adjustment and are proven to outperform sliding box ways for accuracy and speed. Each guideway is automatically lubricated to guarantee long life.

Required Clearance

Box Way Recirculating Ball Guideway

Zero Clearance

7

8

Powerful Vector Spindle Drives

The Haas-designed vector spindle drive uses closed-loop, digital servo technology to provide precise speed control and peak performance under heavy cutting loads. The system optimizes the slip angle between the rotor and stator of the spindle motor to greatly increase low-speed torque and accelerations, resulting in the fastest, most powerful spindle ever. These drives allow you to push the spindle to 150 percent of the motor’s continuous power rating for 15 minutes, and to 200 percent for 5 minutes. That’s more performance headroom than other spindle drives on the market.

Main Spindle Features

*Not available on 50-taper machines. Gearbox standard w/50-taper spindle. Gearbox not compatible with all spindle options. All machines available in CT or BT.

Model TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC

• • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • •

• (4K) • (5K)

•

• • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • •

• • • •

HIGH-TORQUE

Spindle Configurations

See model guide on pages 22 – 23.

40 TAPER

50 TAPER

2-SPEED GEARBOX

4,000 / 5,000 RPM *

6,000 RPM *

7,500 RPM

10,000 RPM

10,000 RPM *

12,000 RPM *

15,000 RPM *

30,000 RPM *

9

High-Capacity Cartridge Spindle (above)The advanced design of our spindles provides high axial-

thrust capability, yet generates minimal heat. The front and rear bores of the housing and the OD of the spindle are finished in one operation. This guarantees perfect alignment between the bores and ODs, thus reducing bearing heat.

Our spindles use pre-loaded angular-contact bearings throughout, with the two forward bearings separated by a large spacer to enhance radial stability – enabling heavy cuts in steel. To ensure long life, the spindle is pressurized with air to prevent coolant contamination, and an air/oil mixture is injected automatically at preset intervals to ensure precise lubrication and long bearing life.

On-The-Fly WYE-DELTA SwitchingMany Haas VMCs feature the Haas Dual-Drive

system, which consists of a dual-winding motor – Wye and Delta – and an electronic switch to change between the two windings. Selecting the best winding for low-rpm cutting and the best winding for high-rpm cutting yields higher torque over a wider rpm range. On-the-fly switching maximizes acceleration/deceleration rates for more chip making and less waiting.

PE

AK

PO

WE

R

RPM

Typical power curveEnhanced power range with on-the-fly Wye-Delta

Some items shown in this brochure are optional. Please contact your local distributor for assistance.

The cartridge design of the Haas spindle simplifies service by allowing quick changeout of the entire spindle.

10

Vibration-Isolated GearboxHaas has invested more than

$4 million in the finest gear-making and inspection equipment in the world. Haas gears are CNC machined and hobbed out of 8620 steel, heat-treated to 60 Rc, and then precision CNC ground to AGMA Class 13 quality. A dry-sump oiling system circulates oil to all vital areas of the gearbox,

and polyurethane mounts eliminate vibrations that could show up on finishing passes.

Main Spindle Features

Belt DriveThe standard configuration for many

40-taper VMCs is a Haas-built cartridge spindle that is driven by the motor via belt. This provides a good combination of torque and rpm for a wide selection of machining operations. It is a great overall value.

Inline DriveThe most advanced Haas spindle

design is an innovative 12,000-rpm, inline direct-drive spindle that is coupled directly to the motor. This provides super-smooth operation for excellent surface finishes, and reduces operating heat for greater thermal stability. (Available only on VM & SS models .)

Synchronized Tapping Using an encoder

attached directly to the Haas high-performance spindle, Z-axis motion is synchronized with the spindle’s rotation. Synchronized tapping eliminates the need for expensive, floating tap holders, and prevents

lead-thread distortion and start-thread pullout. Also, the tap can reverse out of a rigid-tapped hole faster than it went in, which can reduce cycle times.

(Standard on all machines except GR, Mini Mill and Toolroom Mill.)

Gear DriveThe Haas geared-head spindle

provides increased low-end torque for heavy cutting, while retaining the ability to run up to 10,000 rpm for high-speed machining. It is standard on 50-taper machines, providing 450 ft-lb of torque, and optional on 40-taper machines, providing 250 ft-lb of torque.


11

Spindle Head Thermal Stability Enhancements

An independent jacket in our head casting surrounds the spindle. Coolant is circulated through this jacket to remove heat generated by the spindle. This minimizes thermal distortion of the head, eliminating Y- and Z- axis changes. Because the coolant touches all parts of the machining area, it accurately reflects the overall temperature of the machine.

To improve thermal stability further, we’ve insulated the head and increased the air flow through the spindle-head assembly. Cool air enters from the rear of the machine, flows around the spindle and exits at the top, away from the spindle head.

A spindle chiller is also available for VF-1 through VF-11 40-taper models. This option keeps the spindle head at a constant temperature, even during dry machining.

See model guide on pages 22-23.

Note: Charts reflect performance with optional 2-speed gearbox.

2,000

1 2 3 4 5 6 7 8

6,000

10,000

0.000000.00020

-0.00020

0.00060

-0.00060

0.00100

0.00140

-0.00140

-0.00100

Machine Operation Time (Hours)

Movem

ent (Inches)

Room

Tem

pera

ture

Sp

ind

le

RP

M

70º

75º

Y Axis

Z Axis

Temp.

X AxisSpindle Head Thermal ControlThe chart at right shows an 8-hour thermal test of a Haas

Super-Speed VMC with inline, direct-drive spindle. The bottom shows spindle speed changes during the test, and the top shows thermal changes in the spindle head over the 8 hours. The test was performed in an uncontrolled environment. During the test, the ambient temperature increased from 71º F (22º C) to almost 75 º F (24º C), with virtually no affect on the spindle head.Note: These test results are provided as an example only. Actual results will vary based on the cutting conditions and environmental conditions during measurement.

More Spindle TorqueCutting performance and material

removal rates are a product of torque, speed and power. These charts show two of the enhanced-performance options you can add to your Haas VMC. The one at left shows a gear-driven, 7,500-rpm spindle, and the chart at right shows a gear-driven, high-torque, 10,000-rpm spindle.

12

Tool ChangingEconomical Electronic Tool Changer

The standard Haas 40-taper tool changer is an economical choice for cost-conscious shops. A sinusoidal motion arm accelerates and decelerates the shuttle for smooth operation, and each pocket has a retractable cover that prevents chips from entering the changer and sticking on the tool tapers. Simple design and minimal moving parts guarantee long life and reliable service.

(Standard on Mini Mill and VF-1 through VF-5 40-taper models. VF-6 through VF-11 and all 50-taper models come standard with a side-mount tool changer.)

1) VF-5/50 max diameter 4" ( 7" ) 2) VF-5/40 max diameter 3" ( 6" ) 3) VF-2YT to VF-4 4) VF-5 to VF-11

Tool Changer Type # Tools Machine Models Tool-to-Tool Chip-to-Chip Max Diameter full (adj empty)

Standard configuration

40-taper umbrella-style 20 VF-1 thru VF-5 4.2 sec 4.5 sec 3.5"

40-taper side-mount 24+1 VF-2SS thru VF-6SS 1.6 sec 2.2 sec 3" ( 5" )

40-taper side-mount 24+1 VF-6 thru VF-11 2.8 sec 3.6 sec 3" ( 6" )

50-taper side-mount 30+1 VF-5/50 thru VF-11/50 4.2 sec 6.3 sec 4" ( 10"1 )

Optional configuration

40-taper side-mount 24+1 VF-1 thru VF-5 2.8 sec 3.6 sec 3" ( 5"2 )

40-taper side-mount 40+1 VF-2YT thru VF-11 2.8 sec 3.6 sec 3" ( 5"3, 6"4 )

Tool Changer Specifications

The Haas-designed and -built side-mount tool changer symbolizes our focus on in-house design, development and manufacturing. It’s the best way to ensure total control. We use this approach to refine our processes, control costs and ensure a consistent high level of quality in everything we build.

From concept to reality

13

Inside The Haas Side-Mount Tool Changer

The synchronized cycloidal motion of our side-mount tool changers is controlled by precision cams that are manufactured in-house on custom-built, 5-axis Haas machines. This rugged, dependable design uses a special Haas worm-gear drive and an electronically controlled start/stop system for long life and maintenance-free operation. Every Haas SMTC is manufactured completely in-house to guarantee fast, smooth, reliable operation.

SMTC

1.6Tool Change Timesas Short as

SECONDS (tool to tool)

Chip AugerPeople buy CNC machines to make parts

faster. The last thing they want is to waste time removing chips. Our auger-style chip conveyor automatically removes chips from the machine, while compressing them and wringing out the coolant at the same time. For added reliability, the system senses torque loads and reverses automatically if a jam occurs.

14

Chip RemovalEfficient Free-Flow Enclosure Design

Haas VMCs provide more uncluttered room than any other machines in their class. There’s plenty of space for chips, with no hidden areas where they can build up. Sloped panels direct chips to the front of the machine, where the optional chip auger compresses them, wrings out the coolant and conveniently discharges them at the side of the machine.

15

Coolant Systems

Programmable Coolant Nozzle (right)

We spent time watching operators machining parts and noticed they were constantly opening the doors of the machine to readjust coolant lines. Our programmable coolant nozzle is controlled automatically by the part program to direct coolant precisely at the cutting area, eliminating constant adjustments by the operator. The nozzle can also be adjusted from the keypad while a program is running.

300 psi or 1,000 psiThrough-Spindle CoolantThrough-spindle coolant uses anauxiliary pump to supply coolantthrough the tool, directly to the cutting edge. This increases tool life, allows higher cutting speeds, and clears chips during deep-hole drilling and blind-pocket milling. Two systems are available. One provides up to 300 psi to the cutting edge, and the other provides up to 1,000 psi. The 1,000-psi system includes the auxiliary coolant filter (shown at right). The actual pressure of both systems will vary with the size of the coolant passages in the tool.

See page 39 for flow rate details.

Auxiliary Coolant FilterThis 25-micron, #2 bag-type filter

system removes contamination and minute particles from the coolant before they can be recirculated through the coolant pump.

Our coolant tanks have wheels for easy removal to facilitate cleaning. A separate chip basket and lift-out screen prevent chips from reaching the pump. All electrical and hose connections at the tank can be removed by hand, and the lid and pump can be lifted up and out without removing any fasteners.

Coolant Level SensorA sensor in the coolant tank allows

you to monitor coolant level directly on the control screen, preventing damaged tools and saving time.

➥

Easy-Access, Roll-Out Coolant Tanks


A 95-gallon coolant tank is standard on the VF-6 through VF-11, and can be added to the VF-1 through VF-5 to increase the coolant capacity.

16

Distinctive Machines

Increase productivity and run unattended with a Haas VF-3 or VF-4 with automatic pallet changer (APC). The Haas APC is a side-loading pallet changer featuring 40" x 19" steel pallets. Non-machining tasks, such as fixture setups and part changeovers, can be performed off-line on one pallet while parts are being machined on another.

Mill Drill Center with Dual Pallet Changer

For high-volume production of small parts, where cycle times are short and part loading is frequent, keeping non-cutting time to a minimum is crucial to maintaining a favorable cost per part.

The MDC-500 Mill Drill Center is a state-of-the-art machining center that provides high-speed drilling and tapping, as well as full milling capabilities, in an affordable, pallet-changing package designed to increase a shop’s parts volume.

Pallet Size (all models)

X 40" (1016 mm) Y 19" (483 mm)

Max Pallet Load 1,000 lb (454 kg)

Clamping Force 14,900 lb @ 85 psi (66279 N @ 5.86 bar)

MDC-500 Travels

X 20" (508 mm)Y 14" (356 mm)Z 20" (508 mm)Load Stations 2 Table Size 20" x 12.75" (508 x 324 mm) Capacity 700 lb (per station, balanced load) (318 kg) Load Station Change Time 4.7 sec

Office Mills

Specifications

Model OM-1A OM-2A

X 8" (203 mm) 12" (305 mm)

Y 8" (203 mm) 10" (254 mm)

Z 12" (305 mm) 12" (305 mm)

Table Size 20" x 10" (508 x 254 mm)

Spindle Type Haas-built Haas-built

ISO 20 taper ISO 20 taper

Spindle Speed 30,000 rpm 30,000 rpm

Toolchanger 20 pocket 20 pocket

Power Required 1-phase – 240V @ 20A

Haas Office Mills bring CNC performance and reliability to industries that are unable to fit a “normal” machine into their facilities. Designed for high-volume production and/or rapid prototyping of small, high-precision 2D or 3D parts, they’re small enough to fit through a 36" door, and light enough for most freight elevators.

Automatic Pallet Changer System

17

Storage Area Another operator-focused

feature is this convenient “glove box” below the pendant. The hinged door folds down to form a handy shelf, and closes securely to keep items out of sight.

Tool Rack System

This versatile rack provides convenient storage for toolholders, cutting tools and accessories right at the machine, eliminating the need for a separate tool cart. The system comes with one rack, a shelf and a storage box; extra racks are available.

➭➭

Operator Convenience Features


18

Dust Extraction System

This system removes dust and particulates generated when machining materials such as graphite and wood, preventing contamination of critical machine components. Powerful suction draws dust away from the tool and into an external collection unit. To keep abrasive particles from reaching critical motion components, the machine’s casting assemblies are pressurized. (Available on VF-1 and VF-2.)

Operator Convenience Features

Door-Activated High-Intensity LightingHalogen lights provide bright, even illumination

of the work area for part inspection, job set up and changeovers. Lights turn on and off automatically when doors open and close, or can be activated manually via a switch on the lights.

Automatic Air Gun Provides a constant blast of air to the cutting tool to clear

chips during dry machining. Activated by M code, the air gun can be programmed to turn on while the spindle is turning, or at the end of a cycle. Air consumption for the auto air gun is 6 scfm.

Servo Auto Door This option opens and closes the machine doors

automatically via the part program. This reduces operator fatigue during repetitive machining operations, or allows for unattended operation when used with a robotic loader. (Available on VF-1

through VF-5.)


Waste Oil/Coolant Separator

During normal operation, tramp oil and coolant can collect inside a machine’s base casting. This unit removes the oil before it can enter the

machine’s coolant system.

Work Probe Features

• Excellent repeatability • Cycle-time reduction • High protection against coolant • High reliability • High performance • Easy and intuitive programming of measuring cycles

Tool Probe Features

• Excellent repeatability • Cycle-time reduction • High protection against coolant • High reliability • High performance • Easy and intuitive programming of measuring cycles

Haas Wireless Intuitive Probing System

The Haas Wireless Intuitive Probing System (WIPS), with optical transmission for part setting, tool setting and inspection, consists of the following elements:

• Spindle Probe Module (work probe)

• Tool Setter Module (tool probe) • Intuitive Probing System

Sofware

The Haas Wireless Intuitive Probing System makes probing easy to understand and use through simple language, a graphical interface and clear instructions.

Step-by-step graphical instructions show machine operators how to set up the probing cycles.

The Haas Intuitive Probing System software guides the operator through the probing set-up process, prompting them to enter each necessary dimension.

Once all dimensions are entered, the operator executes the probing cycle by pushing the Cycle Start button. The probing cycle can then be saved in memory, and recalled when needed.

With the Haas Intuitive Probing System, no knowledge of G-code programming is needed to use the probing system.

WIPS is available as a factory-installed option on most new Haas VMCs.

19

Model VF-2 VF-3 VM-2 VM-3 VM-6 VF-4 VF-5 VF-65-Axis Trunnion • • •Super Speed • • • • •Mold Making • • •

20

Performance Enhancements

5-Axis Trunnion MachinesThe Haas Trunnion Series machines are versatile 5-axis

machining centers that provide full, simultaneous 5-axis motion for machining complex parts, or can position a workpiece to almost any angle for multi-side machining.

The VF-5TR and VF-6TR have a dual-axis trunnion table mounted directly to the bearing trucks in place of the standard T-slot table, which increases rigidity and provides good Z-axis clearance. Both machines are available in 40- or 50-taper configurations. The VF-2TR has the dual-axis trunnion mounted directly to the standard T-slot table, which provides the flexibility to run the machine with or without the trunnion table installed.

FEATURES• Dual-Axis Table

• ±120° Tilt, 360° Rotation

• Side-Mount Tool Changer

• Automatic Chip Auger

• Programmable Coolant Nozzle

• 16 MB Program Memory

• USB Port

• Remote Jog Handle

• High-Speed Machining w/Look-Ahead

• User-Definable Macros

21

The VM Series – Speed and Accuracy for the Mold Making Industry

Designed specifically for mold makers, the VM-2, VM-3 and VM-6 feature the Haas 12,000-rpm, inline direct-drive spindle, a unique 40-taper design that provides superior surface finishes, excellent thermal stability and quiet operation. VM machines come standard with an automatic chip auger, remote jog handle, automatic air gun, high-speed machining, hard drive with Ethernet interface, USB port, user-definable macros, programmable coolant nozzle and more.

A unique, multi-fixture table provides T-slots in both X and Y directions, as well as drilled and tapped holes and precision dowel-pin bores.

VF-SS Super-Speed VMCs – Affordable High-Speed Performance

The Haas VF-2SS, VF-3SS, VF-4SS, VF-5SS and VF-6SS high-performance vertical machining centers come standard with an innovative 12,000-rpm, inline direct-drive spindle, an ultra-fast side-mount tool changer and high-speed rapids for reduced cycle times.

The all-around enhanced performance of the Super-Speed machines yields shorter cycle times and more parts per shift, making them some of the more popular innovations offered by Haas Automation.

22

Office MillsOM-1A 8"x8"x12" (xyz) 203x203x305 mmOM-2A 12"x10"x12" (xyz) 305x254x305 mm

Toolroom MillsTM-1 30"x12"x16" (xyz) 762x305x406 mmTM-1P 30"x12"x16" (xyz) 762x305x406 mmTM-2 40"x16"x16" (xyz) 1 016x406x406 mmTM-3 40"x20"x16" (xyz) 1 016x508x406 mm

Mini VMCsMini Mill 16"x12"x10" (xyz) 406x305x254 mmMini Mill 2 20"x16"x14" (xyz) 508x406x356 mmSuper Mini Mill 16"x12"x10" (xyz) 406x305x254 mmSuper MM 2 20"x16"x14" (xyz) 508x406x356 mm

40-Taper Standard VMCsVF-1 20"x16"x20" (xyz) 508x406x508 mmVF-1YT 20"x20"x20" (xyz) 508x508x508 mmVF-2 30"x16"x20" (xyz) 762x406x508 mmVF-2YT 30"x20"x20" (xyz) 762x508x508 mmVF-3 40"x20"x25" (xyz) 1 016x508x635 mmVF-3YT 40"x26"x25" (xyz) 1 016x660x635 mmVF-4 50"x20"x25" (xyz) 1 270x508x635 mmVF-5 50"x26"x25" (xyz) 1 270x660x635 mmVF-5XT 60"x26"x25" (xyz) 1 524x660x635 mmVF-6 64"x32"x30" (xyz) 1 626x813x762 mmVF-7 84"x32"x30" (xyz) 2 134x813x762 mmVF-8 64"x40"x30" (xyz) 1 626x1 016x762 mmVF-9 84"x40"x30" (xyz) 2 134x1 016x762 mmVF-10 120"x32"x30" (xyz) 3 048x813x762 mmVF-11 120"x40"x30" (xyz) 3 048x1 016x762 mm

Machines shown with optional equipment.

Extended Z axis available

40-t

aper

50-t

aper

Tool

room

Off

ice

Mill

s

5 Ax

is

Gant

ry

VF-1 VF-2 VF-3 VF-4 VF-5 VF-6

VF-3YT/50 VF-5/50 VF-6/50 VF-7/50 VF-8/50 VF-9/50

Extended Y available Extended X available

Extended X available

OM-1A OM-2A

Mill

Drill

Cent

er

MDC-500Mol

d M

achi

ne

VM-2 VM-3 VM-6

SR-100 GR-510 GR-712

Vertical Machining Center Product Line

MachineTravels

Extended Y available

Supe

r Sp

eed

VF-2SS VF-3SS VF-4SS VF-5SS VF-6SS

VF-2TR

TM-1 TM-1P TM-2 TM-3

23

50-Taper Standard VMCsVF-3YT/50 40"x26"x25" (xyz) 1 016x660x635 mmVF-5/50 50"x26"x25" (xyz) 1 270x660x635 mmVF-5/50XT 60"x26"x25" (xyz) 1 524x660x635 mmVF-6/50 64"x32"x30" (xyz) 1 626x813x762 mmVF-7/50 84"x32"x30" (xyz) 2 134x813x762 mmVF-8/50 64"x40"x30" (xyz) 1 626x1 016x762 mmVF-9/50 84"x40"x30" (xyz) 2 134x1 016x762 mmVF-10/50 120"x32"x30" (xyz) 3 048x813x762 mmVF-11/50 120"x40"x30" (xyz) 3 048x1 016x762 mm

Large Capacity VMCsVS-1 84"x50"x50" (xyz) 2 134x1 270x1 270 mmVS-3 150"x50"x50" (xyz) 3 810x1 270x1 270 mm

5-Axis VMCsVF-2TR 30"x16"x20" (xyz) 762x406x508 mmVF-5TR 38"x26"x25" (xyz) 965x660x635 mmVF-5/50TR 38"x26"x25" (xyz) 965x660x635 mm

VF-6TR 64"x32"x30" (xyz) 1 626x813x762 mmVF-6/50TR 64"x32"x30" (xyz) 1 626x813x762 mmVR-8 64"x40"x30" (xyz) 1 626x1 016x762 mmVR-11 120"x40"x30" (xyz) 3 048x1 016x762 mm

VMCs with APC (Automatic Pallet Changer)VF-3APC 40"x20"x25" (xyz) 1 016x508x635 mmVF-3SSAPC 40"x20"x25" (xyz) 1 016x508x635 mmVF-4APC 50"x20"x25" (xyz) 1 270x508x635 mmVF-4SSAPC 50"x20"x25" (xyz) 1 270x508x635 mm

Super-Speed VMCsVF-2SS 30"x16"x20" (xyz) 762x406x508 mmVF-2SSYT 30"x20"x20" (xyz) 762x508x508 mmVF-3SS 40"x20"x25" (xyz) 1 016x508x635 mmVF-3SSYT 40"x26"x25" (xyz) 1 016x660x635 mmVF-4SS 50"x20"x25" (xyz) 1 270x508x635 mmVF-5SS 50"x26"x25" (xyz) 1 270x660x635 mmVF-6SS 64"x32"x30" (xyz) 1 626x813x762 mm

GantrySR-100 100"x52"x8" (xyz) 2 540x1 321x203 mmGR-510 121"x61"x11" (xyz) 3 073x1 549x279 mmGR-712 145"x85"x11" (xyz) 3 683x2 159x279 mm

Mold MachinesVM-2 30"x20"x20" (xyz) 762x508x508 mmVM-3 40"x26"x25" (xyz) 1 016x660x635 mm VM-6 64"x32"x30" (xyz) 1 626x813x762 mm

Mill Drill CenterMDC-500 20"x14"x20" (xyz) 508x356x508 mm

Larg

e

w/A

PCs

VS-1 VS-3

VR-8 VR-11

VF-3APC | VF-4APC

VF-7 VF-8 VF-9 VF-10 VF-11

VF-10/50 VF-11/50

Min

i

APC also available in SS models.

VF-5TR | VF-5/50TR VF-6TR | VF-6/50TR

Mini Mill Super Mini Mill Mini Mill 2 Super Mini Mill 2

24

Rotary Tables & Indexers

4TH- AND 5TH-AXIS OPTIONSAdding a fully integrated 4th- or 5th-axis Haas brushless rotary table to

your Haas VMC creates a supercharged machining center package that boosts your productivity and reduces setups. Fully synchronized 4th- and 5th-axis configurations are available on most Haas VMC models.

Earlier brush-style Haas rotary tables may be used on new VMCs with an adapter kit. Contact Haas or your local Haas Factory Outlet for details.


Above: A complex impeller being created on a Haas mill using a dual-axis trunnion table and 5-axis simultaneous motion.

25


Serv

o Co

ntro

lTR

UNN

ION

SCOLCR SC02-ACR

T5C

T5C T5C 2 T5C 3 T5C 4

HRT

SP

HRT

Dua

l

HRT160SP HRT210SP HRT310SP

HRT160-2 HRT210-2

HRT

AH

RT S

HS

HRTA5 HRTA6

HRT210SHS-HD

TRT

TRT160 TRT210

HRT

HRT110 HRT160 HRT210 HRT310 HRT320/FB HRT450 HRT600HRT210HS also available

HA5

C

HA5CSB HA5C HA5C 2 HA5C 3 HA5C 4

TR110 TR160 TR210 TR310

Rotary Tables & Indexers Product Line

Dual-platter TR160-2 also available

26

LED Beacon LightThe Haas-designed beacon light features

ultra-bright LEDs that can easily be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.

15" Color LCD ScreenOur full-color, 15" TFT LCD display is designed

to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare, tempered glass for protection and easy viewing.

USB PortThe built-in USB port allows the use of

customer-supplied USB flash memory devices.

Multi-FunctionJog Handle

Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.

Advanced Program EditingA unique feature of the Haas control is an

advanced program editor that allows the operator to edit programs in a dual-window format.

Dedicated KeypadThe Haas keypad has more than 130 keys.

All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you’ve ever fumbled with hot keys, or had to page through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.

Stainless Steel BezelConstructed of heavy-gauge T304 stainless

steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s also easy to clean, resists wear and will not corrode. (Not

available on all machines.)

One-Button FeaturesCommon multi-step functions, such as powering up the machine or

setting tool offsets, have been reduced to the push of a single button. Other often-used functions, such as setting part zeros, homing the machine and selecting the next tool during set up, are also one-button commands.

Dedicated Closed SystemOur focus is to provide Haas users with a robust, dependable control that

is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine.

The Haas Control


27

Control SpecificationsGeneralMicroprocessor Triple high-speed 32-bit Program execution speed 1,000 blocks/sec standard Axis control 3 axes linear, 4th and 5th axes optional Interpolation G01, G02, G03, helical Min. input increment – inch mode 0.0001" – metric mode 0.001 mm Min. output resolution 0.0000072" (0.000 18 mm)

Feed Functions Rapid Traverse Override 5%, 25%, 50%, 100% Feedrate Override 0% to 999% in 1% increments Jog Handle Resolution – inch mode 0.0001"/0.001"/0.01"/0.1" per handle division – metric mode 0.001/0.01/0.1/1.0 mm per handle division Jog Feeds – inch mode 0.1/1.0/10.0/100.0 ipm – metric mode 1.0/10/100/1000 mm/min. Zero Return One key (G28)

Spindle Functions Speed Command S = 1 to max spindle rpm Override 0% to 999% in 1% increments

Tool Functions Length Compensation 200 sets, geometry & wear Diameter/Radius Compensation 200 sets, geometry & wear Length Measurement Automatic length storage Life Management 200 sets w/alarms Selection Txx command

Programming Compatibility ISO standard G code Positioning Absolute (G90), incremental (G91) Canned Cycles 22 functions standard Circular Pocket Milling G12, G13 Bolt-Hole Drilling G70, G71, G72 Advanced Pocket Milling G150 Inch/Metric Switchable Work Coordinates 105 sets Part Zero Set Automatic storage M Code Outputs 5 spare † 2D Cutter Diameter Compensation G40, G41, G42 2D Cutter Length Compensation G43, G44, G49 3D+ Cutter Diameter Compensation G141 5-Axis Tool Length Compensation G143

Data Input/Output Communications Port RS-232, USB Data Rate To 115,200 baud ‡

Memory Capacity Standard 1 MB; up to 16 MB optional Number of Programs 500

† May be used by options. ‡ With 6' or shorter cable.

Control Features

■ User friendly

■ Advanced program editor

■ Brushless AC servo drives

■ Up to 833 ipm cutting feedrates

■ Triple 32-bit processors

■ Executes up to 1,000 blocks/second

■ ISO standard G-code compatibility

■ Haas one-button power-up

■ Haas one-button tool offset entry

■ 200 tool offsets

■ 105 work coordinates

■ Tool load monitoring

■ Tool life management

■ Helical interpolation

■ Background editing

■ Split-screen program review

■ Trig calculator

■ Tangent calculators

■ Speeds and feeds calculator

■ Arc calculator

■ RS-232 / DNC link / USB / optional Ethernet

■ Mid-program restart

■ Inch or metric programming

■ Message page

■ Selectable languages

■ Self-diagnostics

■ Fully descriptive alarms

■ Programmable mirror imaging

■ Advanced pocket milling

■ Bolt-hole drilling

■ Graphic dry run

■ 5 spare M functions

■ Contour accuracy control

■ Text engraving

■ Made in the USA


Hard Drive with Ethernet Interface

Store and transfer data between your Haas and a network or PC with the Ethernet connection. Program files are easily transferred to and from memory or the internal hard drive, and large files can be accessed by multiple machines. High-speed data transfers allow DNC of large files at up to 1,000 blocks per second. Compatible with Windows 95, 98, ME, 2000 and XP. Also works with server versions NT 4.0, 2000 and 2003. IPX/SPX or TCP/IP protocol. Easily set up from the control screen.

28

Intuitive Programming System

Thanks to Haas’ Intuitive Programming System, it’s no longer necessary for a machine operator to know G code to perform basic milling operations. The IPS software comes standard on our Toolroom Mills, and is optional on all other Haas vertical machining centers.

The Haas Intuitive Programming System is a proprietary conversational operating system that uses an easy-to-understand tabbed format with full-color graphics to guide the operator through the steps necessary to machine a part. First, the control leads the operator through basic job setup: setting tool and work offsets, selecting the tool type and specifying the material being cut. The operator then selects an operation to perform and fills in basic information as prompted. Default values are automatically filled in for spindle speed, depth of cut and feedrate based on the information provided, but the operator can change these conservative values if desired. Once all necessary information is entered, pushing Cycle Start performs the desired operation. Multiple operations can be recorded and saved as a single G-code program that can be played back to duplicate the part. This program can be transferred to any other Haas VMC and run without editing. Help menus are available directly on screen, and a graphic dry-run feature allows operators to check their work before running a part.

Novice operators quickly learn both basic programming and the finer points of using the Haas control by working with the Intuitive Programming System.

Simple, intuitive and more powerful than ever

Using plain language, simple graphics and easy-to-follow steps, the Haas Intuitive Programming System guides the operator through the steps necessary to machine a part.

Use the top tab menu to select the type of

operation to perform.

1 Further define your specific cutting operation by

choosing from the lower set of tabs.

2 Fill in the information when prompted

by the control and press Cycle Start.

3

Memory Upgrades up to 16 MBAllows loading of large programs directly into the machine,

rather than from DNC, for faster feedrates. Battery-powered, high-speed static RAM is faster than dynamic RAM and retains data even when the power is turned off.

Memory Lock KeyswitchLocks memory to prevent program editing by

unauthorized personnel. It can also be used to lock settings, parameters, offsets and macro variables.

USB PortThe built-in USB port allows

the use of customer-supplied USB flash memory devices.

8 M FunctionsAdds 8 additional M functions for a total of up to 13 user

interfaces. Use these to activate probes, auxiliary pumps, clamping devices, part loaders, etc.


29

DXF File Import The G-code vs. conversational programming debate has

been going on for years in the machine tool industry, with both sides trying to fit all customers and all parts into one box. The conversational-style camp can’t or won’t see the merits of a CAM generated G-code program. The CAM group can never see the advantage of setting up a job and generating the program quickly at the machine. The fact is, both methods are reasonable and desirable under the right conditions. The Haas control is unique in this regard, as it is very good at both methods of operation, and the addition of *.dxf import takes it to a new level of capability.Haas’ addition of *.dxf import

capability to the Intuitive Programming System allows a programmer to simply im-port a *.dxf file into the Haas control, select features on the file – holes, threading, pockets, islands or contours – and gener-ate the toolpath. The program output is standard G-code – easy to understand and edit. By taking advantage of the editing functions of the Haas control, the user can modify features, change the order of operations or even conveniently put them into other programs – all at the control, without going back to a computer to repost a CAM-generated program.

The Haas control provides the best of both G-code and conversational-style systems. It doesn’t force the user into one method of operation. The Haas control weaves them into a simple, coherent control system: Use manual or CAM generated G-code, or use the Intuitive Programming Sys-tem or mix them. Use the programming strategy that is best for the part; the Haas control will accept them all.

30

The High-Speed Machining option for Haas machining centers is a powerful tool to reduce cycle times and improve accuracy. Testing on complex 3- to 5-axis applications has shown drastic reductions in cycle times, as well as increased accuracy and smoother motion.

Using a motion algorithm called “acceleration before interpolation,” combined with up to 80 blocks of look-ahead, the HSM option allows contouring feedrates up to 833 ipm without risk of distortion to the programmed path. All programmed motions are accelerated before interpolation to ensure that the movement of each axis does not exceed the acceleration capability of the machine. The look-ahead algorithm determines the fastest feedrate at which each stroke can be blended into the next without stopping. This results in higher accuracy, smoother motion and a higher actual feedrate – even with complex part geometry.

Many of today’s “high-speed” controls are either very expensive or require a pre-processing mode or special post, which is time consuming and alters the G-code program. The Haas HSM option accepts ISO standard G code from all major CAM systems, and is only a fraction of the cost of other high-speed controls.

High-Speed Machining

Remote Jog HandleThe patented Haas color remote jog handle

expands the capabilities of our standard remote jog handle by adding a 2.8" color graphic display, an 11-button keypad, a triple-knob motion-control system and a built-in LED inspection light. You can set tool and work offsets, jog up to 9 axes, display machine position, show the current program running and much more – all from the jog handle.

HSM BENEFITS

• Greatly reduces cycle times

• Full look-ahead up to 80 blocks

• Up to 833 ipm contouring

• Acceleration before interpolation

• ISO standard G-code programming

• Higher accuracy

• Smoother motion


31

User-Definable MacrosCreate subroutines for custom canned

cycles, probing routines, operator prompting, math equations or functions, and family-of-parts machining with variables.

EngravingBy using a single block of code, you can

easily engrave any text string enclosed in parentheses. Sequential part numbers can be engraved by using the standard serializing function.

4th- and 5th-Axis ControlAllows the use of 4th- and 5th-axis rotary tables for multi-side

machining or machining complex contours and shapes, such as impellers. Increases productivity and reduces setups.

Coordinate Rotation/ScalingUse rotation in conjunction with work offset probing to speed

workpiece set up, or use it to rotate a pattern to another location or around a circumference, etc. Use scaling to reduce or enlarge a toolpath or pattern.

Second Home PositionAllows the operator to quickly send the axes to a user-defined

Home position other than the machine’s Home position.

32

The Hidden Power Inside the HELP/CALC

The Help function is a built-in, searchable operator’s manual that explains the various functions of a Haas machine. Simply type in a keyword to quickly find a specific topic, or hit F1 for G-code help and F2 for M-code help.

The Calculator pages are another powerful tool. There are calculators for solving triangle equations, circle-circle-tangent equations and circle-line-tangent equations, as well as a speeds-and-feeds calculator. Also included are a standard math calculator, a drill-and-tap chart, a decimal-equivalent chart and a time-and-date function. These calculators simplify machining operations and speed math calculations, and the solution to any equation can easily be pasted into a program directly from the calculators.

The Power of a Single ButtonSome of the most powerful features of the Haas control – features that every machinist will

truly appreciate – take only the push of a single button. For example, you can set tool offsets with the push of a single button – without having to enter numbers manually into the control. Simply jog a tool to the surface of the part, push the Tool Offset Measure button, and the tool’s length is automatically stored in the tool length register. Now, push the Next Tool button and repeat the process for each tool. That’s it! Setting work offsets is just as easy. These time-consuming processes have been reduced to a few simple steps, and that’s just two of

the special features inside every Haas control. Ask your distributor for a complete demonstration, and see for yourself how a Haas will change the way you work.

Tool Load MonitoringMaximizing tool life is another key to increasing productivity. The Haas

control can monitor the spindle load for each tool and automatically adjust the feeds for that tool if the load exceeds a limit set by the operator. If a tool exceeds the preset limit, the control can be set to reduce the commanded feedrate, alert the operator, go into feed-hold mode or generate a tool-overload alarm. The first time a program is run, the Haas control automatically records the highest load seen for each tool. Using this information and the Tool Load Monitoring feature of the control, the operator can set load limits for each tool. This maximizes tool life, and protects the workpiece and machine from the effects of tool wear.


33

Haas Control

CURNT/COMDSThe Current Commands page displays the current running status of the

machine, including the current program running, the current position, which tool is in the spindle, the spindle and axis loads, the current spindle speed and the feedrate. Additional screens show which commands and G code are being used in the current program; and a timer shows cycle time, cutting time, power-on time and M30 count (number of parts). Other displays show which macro variables are being used, provide tool-life information, and show the minimum and maximum spindle load for each tool.

SETNG /GRAPHPush this button to access the Settings pages of the Haas control,

where you’ll find a wide selection of operator-definable preferences. Use these settings to optimize the way you work. You can set program restarts and automatic power-off, select languages and units of measure, lock out overrides and parameters, access special features like electronic thermal compensation and much more. The Graphics page provides a 2D representation of the programmed toolpath. Use this graphic dry run to identify possible problems and avoid mishaps.

Advanced Tool ManagementTo maximize productivity, the Haas control has an integrated Advanced

Tool Manager that allows you to create a group of redundant tools for use within a program. From a single screen, you can view the different tool groups and their parameters. Simply define which tool numbers are part of a group, and what parameter will determine when to change to a redundant

tool. This can be based on feed time, the number of tool calls, the number of holes drilled or tapped, or a preset load limit.

To use a group of redundant tools in a program, simply enter the group number as your tool call-out. The

tool offsets you defined during set up will automatically be loaded for each tool as it’s called up.


34

TM MM VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM VR VS GR MDC SS

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

❍ ❍ ❍ ❍ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ❍ ■ ■

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

❍

▲ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

● ●

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

❍ ❍ ❍ ❍


❍ ❍ ❍ ❍ ❍ ● ● ● ● ● ● ● ● ●

■ ■ ■ ■ ■ ■ ■ ■

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍


▲ ▲ ▲ ▲ ▲ ●

▲ ▲ ▲


❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ ❍

▲ ▲

❍ ❍ ❍ ❍ ❍ ❍ ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ■ ● ❍

❍ ❍ ❍

❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍

▲ ▲ ▲ ❍

▲

❍ ❍ ❍ ❍ ❍ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ❍ ● ■ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ■* ❍

❍ ❍ ❍ ❍ ❍ ❍ ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ ❍

▲ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑

❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❑ ❍


❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ● ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ ❍

❍ ❍ ● ● ● ● ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ■ ❍ ● ●

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ● ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ■ ● ● ■ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ● ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ ❍

❍ ❍ ❍ ❍ ❍ ❍ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❑ ❍ ❍ ❑ ❍ ❍ ❍

40-TAPER SPINDLE

50-TAPER SPINDLE

2-SPEED GEARBOX

CT SPINDLE

BT SPINDLE

5,000 RPM

10,000 RPM

HIGH-TORQUE 10,000 RPM

12,000 RPM

15,000 RPM

30,000 RPM

TOOL CHANGERS

24-POCKET SMTC

30-POCKET SMTC

40-POCKET SMTC

SPECIAL MACHINES

SUPER-SPEED MODEL

5-AXIS TRUNNION MODEL

SPECIAL OPTIONS

AUTO AIR GUN

AUX. COOLANT FILTER

AUTO PALLET CHANGER

AUTOMATIC CHIP AUGER

DUST EXTRACTION SYSTEM

EXTENDED Z AXIS

EXTENDED Y AXIS

EXTENDED X AXIS

95-GALLON COOLANT TANK

LINEAR SCALES

PROGRAMMABLE COOLANT

THROUGH-SPINDLE COOLANT

EXTRA RAPID TRAVERSE

HIGH-INTENSITY LIGHTING

BASIC SPINDLE CHILLER

AUTOMATIC DOOR

CONTROL OPTIONS

EXPANDED MEMORY

4TH-AXIS DRIVE

5TH-AXIS DRIVE

8 ADDITIONAL M FUNCTIONS

COORD. ROTATION/SCALING

HARD DISK/ETHERNET

RIGID TAPPING

HIGH-SPEED MACHINING

USER-DEFINABLE MACROS

REMOTE JOG HANDLE

SPINDLE ORIENTATION

INTUITIVE PROGRAMMING

TOOL & PART PROBING

SPINDLE CONFIGURATIONS

Important: The above chart represents the standard configurations of machines distributed in North America. Machine configurations and availability may differ for other countries and regions. This chart is for reference only. Check with your local Haas distributor for exact pricing, configuration and availability of machines and options. *X-axis scale only.

Machine Configurations & Options▲ = Available configuration ● = Standard on 40-taper machines ❍ = Optional on 40-taper machines ■ = Standard on 50-taper machines ❑ = Optional on 50-taper machines

35

Machine Dimensions

Side View VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11A 92.80" 92.80" 110.00" 110.00" 114.00" 123.00" 123.00" 139.00" 139.00" 123.00" 139.00" 2357 mm 2357 mm 2794 mm 2794 mm 2895 mm 3124 mm 3124 mm 3531 mm 3531 mm 3124 mm 3531 mmB (40 Taper) 104.50" 104.50" 117.50" 117.50" 118.20" 124.00" 124.00" 124.00" 124.00" 124.00" 124.00" 2654 mm 2654 mm 2985 mm 2985 mm 3002 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mm 3150 mmB (50 Taper) – – – – 126.50" 138.00" 138.00" 138.00" 138.00" 138.00" 138.00" 3213 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mm 3505 mmC 58.00" 58.00" 74.40" 74.40" 82.88" 94.00" 94.00" 110.00" 110.00" 98.00" 110.00" 1473 mm 1473 mm 1890 mm 1890 mm 2105 mm 2388 mm 2388 mm 2794 mm 2794 mm 2489 mm 2794 mmD 36.00" 36.00" 36.00" 36.00" 36.00" 30.00" 30.00" 30.00" 30.00" 30.00" 30.00" 914 mm 914 mm 914 mm 914 mm 914 mm 762 mm 762 mm 762 mm 762 mm 762 mm 762 mmFront View VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11E 88.00" 88.00" 122.00" 122.00" 137.00" 156.00" 183.00" 156.00" 183.00" 257.00" 257.00" 2235 mm 2235 mm 3099 mm 3099 mm 3480 mm 3962 mm 4648 mm 3962 mm 4648 mm 6528 mm 6528 mmF 64.00" 64.00" 67.20" 67.20" 70.50" 76.00" 76.00" 76.00" 76.00" 76.00" 76.00" 1626 mm 1626 mm 1707 mm 1707 mm 1791 mm 1930 mm 1930 mm 1930 mm 1930 mm 1930 mm 1930 mmG 42.95" 42.95" 46.15" 46.15" 49.15" 55.15" 55.15" 55.15" 55.15" 55.15" 55.15" 1091 mm 1091 mm 1172 mm 1172 mm 1248 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mm 1401 mmH 32.00" 32.00" 30.30" 30.30" 33.20" 33.07" 33.07" 33.07" 33.07" 33.07" 33.07" 813 mm 813 mm 770 mm 770 mm 843 mm 840 mm 840 mm 840 mm 840 mm 840 mm 840 mmI (Door Opening) 35.50" 35.50" 48.50" 48.50" 54.00" 69.00" 84.75" 69.00" 84.75" 122.00" 120.13" 902 mm 902 mm 1232 mm 1232 mm 1372 mm 1753 mm 2153 mm 1753 mm 2153 mm 3099 mm 3051 mmJ 30.00" 30.00" 42.50" 42.50" 42.50" 60.00" 60.00" 60.00" 60.00" 60.00" 60.00" 762 mm 762 mm 1080 mm 1080 mm 1080 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mm 1524 mmK 27.54" 27.54" 27.31" 27.31" 27.31" 27.23" 27.23" 27.23" 27.23" 21.14" 21.14" 700 mm 700 mm 694 mm 694 mm 694 mm 692 mm 692 mm 692 mm 692 mm 537 mm 537 mmL 21.81" 21.81" 20.86" 20.86" 11.18" 21.72" 9.30" 21.72" 9.30" – – 554 mm 554 mm 530 mm 530 mm 284 mm 552 mm 236 mm 552 mm 236 mm M 33.00" 33.00" 36.50" 36.50" 36.50" 43.00" 43.00" 43.00" 43.00" 43.00" 43.00" 838 mm 838 mm 927 mm 927 mm 927 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mm 1092 mmTable VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11W 2.08" 2.08" 2.70" 2.70" 2.05" 4.16" 4.16" 3.24" 3.24" 4.16" 4.16" 52.8 mm 52.8 mm 68.6 mm 68.6 mm 52.1 mm 105.7 mm 105.7 mm 82.3 mm 82.3 mm 105.7 mm 105.7 mmX 26.00" 36.00" 48.00" 52.00" 52.00" 64.00" 84.00" 64.00" 84.00" 120.00" 120.00" 660 mm 914 mm 1219 mm 1321 mm 1321 mm 1626 mm 2134 mm 1626 mm 2134 mm 3048 mm 3048 mmY 14.00" 14.00" 18.00" 18.00" 23.00" 28.00" 28.00" 36.00" 36.00" 28.00" 28.00" 356 mm 356 mm 457 mm 457 mm 584 mm 711 mm 711 mm 914 mm 914 mm 711 mm 711 mmZ 4.92" 4.92" 3.15" 3.15" 3.15" 4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 125.0 mm 125.0 mm 80.0 mm 80.0 mm 80.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mm 125.0 mmT-Slots VF-1 VF-2 VF-3 VF-4 VF-5 VF-6 VF-7 VF-8 VF-9 VF-10 VF-11Number on Table 3 3 5 5 7 5 5 7 7 5 5

X

W

Y

Z

0.640"16.3 mm

0.630"16 mm

1.06"26.9 mm

0.42"10.7 mm

Specifications subject to change without notice. Not responsible for misprints or typographical errors. Note: Overall shipping dimensions vary; contact Haas for details.

E

L

MK

JI

HG

F

A

D

B (max)

C

36

Machine Specifications (Standard 40-Taper Machines)

VF-1 | VF-1YT VF-2 | VF-2YT VF-3 | VF-3YT VF-4 VF-5 | VF-5XT X 20" 30" 40" 50" 50" | 60" 508 mm 762 mm 1 016 mm 1 270 mm 1 270 mm | 1 524 mm

Y 16" | 20" 16" | 20" 20" | 26" 20" 26" 406 mm | 508 mm 406 mm | 508 mm 508 mm | 660 mm 508 mm 660 mm

Z 20" 20" 25" 25" 25" 508 mm 508 mm 635 mm 635 mm 635 mm

Spindle Nose to Table 4 - 24" 4 - 24" 4 - 29" 4 - 29" 7 - 32" 102 - 610 mm 102 - 610 mm 102 - 737 mm 102 - 737 mm 178 - 813 mm

Length 26" 36" 48" | 54" 52" 52" | 62" 660 mm 914 mm 1 219 mm | 1372 mm 1 321 mm 1321 mm | 1 575 mm

Width 14" | 18" 14" | 18" 18" | 25" 18" 23" 356 mm | 457 mm 356 mm | 457 mm 457 mm | 635 mm 457 mm 584 mm

Max Weight on Table 3,000 lb 3,000 lb 3,500 lb 3,500 lb 4,000 lb 1 361 kg 1 361 kg 1 588 kg 1 588 kg 1 814 kg

T-Slot Width 5/8" 5/8" 5/8" 5/8" 5/8" 16 mm 16 mm 16 mm 16 mm 16 mm

T-Slot Center Distance 4.92" 4.92" 3.15" 3.15" 3.15" 125 mm 125 mm 80 mm 80 mm 80 mm

Taper Size #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper

Speed 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm

Drive System Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive

Max Torque Standard 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 102 Nm @ 1400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400

with Optional Gearbox 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450

Bearing Lubrication Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection

Cooling Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled

Spindle Motor Max Rating1 20 hp 20 hp 20 hp 20 hp 20 hp 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW

Axis Motors Max Thrust Rating (z=4,200 lb) 2,550 lb (z=4,200 lb) 2,550 lb (z=4,200 lb) 2,550 lb (z=4,200 lb) 2,550 lb (z=5,600 lb) 3,400 lb (18 683 N) 11 343 N (18 683 N) 11 343 N (18 683 N) 11 343 N (18 683 N) 11 343 N (24 910 N) 15 124 N

Rapids on X Axis 1,000 ipm 1,000 ipm 1,000 ipm 1,000 ipm 710 ipm | 540 ipm 25.4 m/min 25.4 m/min 25.4 m/min 25.4 m/min 18.0 m/min | 13.7 m/min

Rapids on Y & Z Axes 1,000 ipm 1,000 ipm 1,000 ipm | 710 ipm 1,000 ipm 710 ipm 25.4 m/min 25.4 m/min 25.4 m/min | 18.0 m/min 25.4 m/min 18.0 m/min

Max Cutting 650 ipm 650 ipm 650 ipm 650 ipm 500 ipm 16.5 m/min 16.5 m/min 16.5 m/min 16.5 m/min 12.7 m/min

Capacity Standard (optional)2 20 (24+1) 20 (24+1) 20 (24+1, 40+1) 20 (24+1, 40+1) 20 (24+1, 40+1)

Tool Type / Taper CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40

Max Tool Diameter Standard 3.5" (full) 3.5" (full) 3.5" (full) 3.5" (full) 3.5" (full) (full / adjacent empty) 89 mm 89 mm 89 mm 89 mm 89 mm

Max Tool Weight 12 lb 12 lb 12 lb 12 lb 12 lb 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg

Changer Type Standard (Optional) Carousel (SMTC) Carousel (SMTC) Carousel (SMTC) Carousel (SMTC) Carousel (SMTC)

Tool to Tool (optional) 4.2 sec (2.8) 4.2 sec (2.8) 4.2 sec (2.8) 4.2 sec (2.8) 4.2 sec (2.8)

Chip to Chip (optional) 4.5 sec (3.6) 4.5 sec (3.6) 4.5 sec (3.6) 4.5 sec (3.6) 4.5 sec (3.6)

Positioning ±0.0002" ±0.0002" ±0.0002" ±0.0002" ±0.0002" ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm

Repeatability ±0.0001" ±0.0001" ±0.0001" ±0.0001" ±0.0001" ±0.003 mm ±0.003 mm ±0.003 mm ±0.003 mm ±0.003 mm

Machine Weight 7,100 lb | 7,400 lb 7,300 lb | 7,500 lb 12,500 lb | 14,000 lb 13,300 lb 14,600 lb | 15,150 lb 3 220 kg | 3 357 kg 3 311 kg | 3 402 kg 5 670 kg | 6 350 kg 6 033 kg 6 623 kg | 6 872 kg

Air Required 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar

Power Required (min) 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC

Travels

Table

Spindle

Axis Motors

Tool Changer

Accuracy

Miscellaneous

1) 5-minute rating. 2) See page 12 for optional tool changer specifications. 3) Linear scales required to achieve accuracy listed.

37

VF-6 VF-7 VF-8 VF-9 VF-10 VF-11 VM-2 VM-3 MDC64" 84" 64" 84" 120" 120" 30" 40" 20"

1 626 mm 2 134 mm 1 626 mm 2 134 mm 3 048 mm 3 048 mm 762 mm 1016 mm 508 mm

32" 32" 40" 40" 32" 40" 20" 26" 14"813 mm 813 mm 1 016 mm 1 016 mm 813 mm 1 016 mm 508 mm 660 mm 356 mm

30" 30" 30" 30" 30" 30" 20" 25" 20"762 mm 762 mm 762 mm 762 mm 762 mm 762 mm 508 mm 635 mm 508 mm

4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 34" 4 - 24" 4 - 29" 4 - 24"102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 864 mm 102 - 610 mm 102 - 737 mm 102 - 610 mm

64" 84" 64" 84" 120" 120" 36" 54" 20"1 626 mm 2 134 mm 1 626 mm 2 134 mm 3 048 mm 3 048 mm 914 mm 1 372 mm 508 mm

28" 28" 36" 36" 28" 28" 18" 25" 12.75"711 mm 711 mm 914 mm 914 mm 711 mm 711 mm 457 mm 635 mm 324 mm

4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 4,000 lb 3000 lb 4,000 lb 700 lb per pallet1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 814 kg 1 361 kg 1 814 kg 318 kg

5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8"16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm 16 mm

4.92" 4.92" 4.92" 4.92" 4.92" 4.92" 4.375" 3.973" 4.92"125 mm 125 mm 125 mm 125 mm 125 mm 125 mm 111 mm 100 mm 125 mm

#40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper #40 Taper

7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm 12,000 max rpm 12,000 max rpm 7,500 max rpm

Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Direct Speed Inline Inline Direct SpeedBelt Drive Belt Drive Belt Drive Belt Drive Belt Drive Belt Drive Direct Drive Direct Drive Belt Drive

75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 1,400 75 ft-lb @ 2,100 75 ft-lb @ 2,100 75 ft-lb @ 1,400102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 1 400 102 Nm @ 2 100 102 Nm @ 2 100 102 Nm @ 1 400

250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 250 ft-lb @ 450 – – –339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 339 Nm @ 450 – – –

Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection

Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled

20 hp 20 hp 20 hp 20 hp 20 hp 20 hp 30 hp 30 hp 20 hp14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 14.9 kW 22.4 kW 22.4 kW 14.9 kW

(z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb (z=5,600 lb) 3,400 lb 5,600 lb (z=5,600 lb) 2,550 lb(24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N (24 910 N) 15 124 N 24 910 N (24 910 N) 11 343 N

540 ipm 600 ipm 540 ipm 600 ipm 360 ipm 360 ipm 710 ipm 710 ipm 1,000 ipm13.7 m/min 15.2 m/min 13.7 m/min 15.2 m/min 9.1 m/min 9.1 m/min 18.0 m/min 18.0 m/min 25.4 m/min

600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 600 ipm 710 ipm 710 ipm 1,000 ipm15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 15.2 m/min 18.0 m/min 18.0 m/min 25.4 m/min

500 ipm 500 ipm 500 ipm 500 ipm 360 ipm 360 ipm 500 ipm 500 ipm 833 ipm12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min 9.1 m/min 9.1 m/min 12.7 m/min 12.7 m/min 21.1 m/min

24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1) 24+1 (40+1)

CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT or BT / 40 CT/40 CT/40 CT/40

3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6" 3" / 6"76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm 76 mm / 152 mm

12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg 5.4 kg

SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC SMTC

2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.8 sec 2.2 sec

3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 3.6 sec 4.8 sec

±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0003"3 ±0.0002" ±0.0002" ±0.0002"±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.008 mm ±0.005 mm ±0.005 mm ±0.005 mm

±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0002"3 ±0.0001" ±0.0001" ±0.0001"±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.005 mm ±0.003 mm ±0.003 mm ±0.003 mm

21,000 lb 23,000 lb 24,000 lb 25,000 lb 28,000 lb 29,400 lb 7500 lb 14,000 lb 14,000 lb9 526 kg 10 433 kg 10 886 kg 11 340 kg 12 701 kg 13 336 kg 3 402 kg 6 350 kg 6 350 kg

4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 9 scfm, 100 psi113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 4.25 lpm, 6.9 bar

200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC

NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to change without notice. Not responsible for misprints or typographical errors.

38

VF-5/50 | VF-5/50XT VF-6/50 VF-7/50 VF-8/50

X 50" | 60" 64" 84" 64" 1 270 mm | 1 524 mm 1 626 mm 2 134 mm 1 626 mm Y 26" 32" 32" 40" 660 mm 813 mm 813 mm 1016 mm Z 25" 30" 30" 30" 635 mm 762 mm 762 mm 762 mm

Spindle Nose to Table 7 - 32" 5 - 35" 5 - 35" 5 - 35" 178 - 813 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm

Length 52" | 62" 64" 84" 64" 1 321 mm | 1 575 mm 1 626 mm 2 134 mm 1 626 mm Width 23" 28" 28" 36" 584 mm 711 mm 711 mm 914 mm Max Weight on Table 4,000 lb 4,000 lb 4,000 lb 4,000 lb 1 814 kg 1 814 kg 1 814 kg 1 814 kg T-Slot Width 5/8" 5/8" 5/8" 5/8" 16 mm 16 mm 16 mm 16 mm

T-Slot Center Distance 3.15" 4.92" 4.92" 4.92" 80 mm 125 mm 125 mm 125 mm

Taper Size #50 Taper #50 Taper #50 Taper #50 Taper Speed 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm Drive System 2-Speed 2-Speed 2-Speed 2-Speed Geared Head Geared Head Geared Head Geared Head Max Torque Standard 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500

610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 Bearing Lubrication Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Cooling Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled

Spindle Motor Max Rating1 30 hp 30 hp 30 hp 30 hp 22.4 kW 22.4 kW 22.4 kW 22.4 kW

Axis Motors Max Thrust Rating 5,600 lb 5,600 lb (x=3,400 lb) 5,600 lb 5,600 lb 24 910 N 24 910 N (15 124 N) 24 910 N 24 910 N Rapids on X Axis 710 ipm 540 ipm 600 ipm 540 ipm 18.0 m/min 13.7 m/min 15.2 m/min 13.7 m/min Rapids on Y & Z Axes 710 ipm 600 ipm 600 ipm 600 ipm 18.0 m/min 15.2 m/min 15.2 m/min 15.2 m/min

Max Cutting 500 ipm 500 ipm 500 ipm 500 ipm 12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min

Capacity Standard 30+1 30+1 30+1 30+1 Tool Type / Taper CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 Max Tool Diameter Standard 4" / 7" 4" / 10" 4" / 10" 4" / 10" (full / adjacent empty) 102 mm / 178 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm Max Tool Weight 30 lb 30 lb 30 lb 30 lb 13.6 kg 13.6 kg 13.6 kg 13.6 kg Changer Type Standard SMTC SMTC SMTC SMTC Tool to Tool (avg) 4.2 sec 4.2 sec 4.2 sec 4.2 sec

Chip to Chip (avg) 6.3 sec 6.3 sec 6.3 sec 6.3 sec

Positioning ±0.0002" ±0.0003"2 ±0.0003"2 ±0.0003"2 ±0.005 mm ±0.008 mm ±0.008 mm ±0.008 mm

Repeatability ±0.0001" ±0.0002"2 ±0.0002"2 ±0.0002"2 ±0.003 mm ±0.005 mm ±0.005 mm ±0.005 mm

Machine Weight 16,100 lb | 16,650 lb 22,500 lb 24,500 lb 25,500 lb 7 303 kg | 7 552 kg 10 206 kg 11 113 kg 11 567 kg Air Required 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar Power Required (min) 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC

Machine Specifications (Standard 50-Taper Machines)

1) 5-minute rating. 2) Linear scales required to achieve accuracy listed.

VF-5/50 | VF-5/50XT VF-6/50 VF-7/50 VF-8/50

X 50" | 60" 64" 84" 64" 1270 mm | 1524 mm 1626 mm 2134 mm 1626 mm Y 26" 32" 32" 40" 660 mm 813 mm 813 mm 1016 mm Z 25" 30" 30" 30" 635 mm 762 mm 762 mm 762 mm Spindle Nose to Table 7 - 32" 5 - 35" 5 - 35" 5 - 35"

178 - 813 mm 127 - 889 mm 127 - 889 mm 127 - 889 mm Length 52" | 62" 64" 84" 64" 1321 mm | 1575 mm 1626 mm 2134 mm 1626 mm Width 23" 28" 28" 36" 584 mm 711 mm 711 mm 914 mm Max Weight on Table 4,000 lb 4,000 lb 4,000 lb 4,000 lb 1814 kg 1814 kg 1814 kg 1814 kg T-Slot Width 5/8" 5/8" 5/8" 5/8" 16 mm 16 mm 16 mm 16 mm T-Slot Center Distance 3.15" 4.92" 4.92" 4.92"

80 mm 125 mm 125 mm 125 mm Taper Size #50 Taper #50 Taper #50 Taper #50 Taper Speed 7,500 max rpm 7,500 max rpm 7,500 max rpm 7,500 max rpm Drive System 2-Speed 2-Speed 2-Speed 2-Speed Geared Head Geared Head Geared Head Geared Head Max Torque Standard 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 610 Nm @ 500 Bearing Lubrication Air/Oil Injection Air/Oil Injection Air/Oil Injection Air/Oil Injection Cooling Liquid Cooled Liquid Cooled Liquid Cooled Liquid Cooled Spindle Motor Max Rating1 30 hp 30 hp 30 hp 30 hp

22.4 kW 22.4 kW 22.4 kW 22.4 kW Axis Motors Max Thrust Rating 5,600 lb 5,600 lb (x=3,400 lb) 5,600 lb 5,600 lb 24910 N 24910 N (15124 N) 24910 N 24910 N Rapids on X Axis 710 ipm 540 ipm 600 ipm 540 ipm 18.0 m/min 13.7 m/min 15.2 m/min 13.7 m/min Rapids on Y & Z Axes 710 ipm 600 ipm 600 ipm 600 ipm 18.0 m/min 15.2 m/min 15.2 m/min 15.2 m/min Max Cutting 500 ipm 500 ipm 500 ipm 500 ipm

12.7 m/min 12.7 m/min 12.7 m/min 12.7 m/min Capacity Standard 30+1 30+1 30+1 30+1 Tool Type / Taper CT or BT / 50 CT or BT / 50 CT or BT / 50 CT or BT / 50 Max Tool Diameter Standard 4" / 7" 4" / 10" 4" / 10" 4" / 10" (full / adjacent empty) 102 mm / 178 mm 102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm Max Tool Weight 30 lb 30 lb 30 lb 30 lb 13.6 kg 13.6 kg 13.6 kg 13.6 kg Changer Type Standard SMTC SMTC SMTC SMTC Tool to Tool (avg) 4.2 sec 4.2 sec 4.2 sec 4.2 sec

Chip to Chip (avg) 6.3 sec 6.3 sec 6.3 sec 6.3 sec Positioning ±0.0002" ±0.0003"2 ±0.0003"2 ±0.0003"2 ±0.005 mm ±0.008 mm ±0.008 mm ±0.008 mm Repeatability ±0.0001" ±0.0002"2 ±0.0002"2 ±0.0002"2

±0.003 mm ±0.005 mm ±0.005 mm ±0.005 mm Machine Weight 16,100 lb | 16,650 lb 22,500 lb 24,500 lb 25,500 lb 7303 kg | 7552 kg 10206 kg 11113 kg 11567 kg Air Required 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar Power Required (min) 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 200 - 250 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC 380 - 480 VAC

Travels

Tool Changer

Accuracy

Miscellaneous

Axis Motors

Spindle

Table

39

VF-9/50 VF-10/50 VF-11/50

84" 120" 120"2 134 mm 3 048 mm 3 048 mm

40" 32" 40"1 016 mm 813 mm 1 016 mm

30" 30" 30"762 mm 762 mm 762 mm

5 - 35" 5 - 35" 5 - 35"127 - 889 mm 127 - 889 mm 127 - 889 mm

84" 120" 120"2 134 mm 3 048 mm 3 048 mm

36" 28" 28"914 mm 711 mm 711 mm4,000 lb 4,000 lb 4,000 lb1 814 kg 1 814 kg 1 814 kg

5/8" 5/8" 5/8"16 mm 16 mm 16 mm

4.92" 4.92" 4.92"125 mm 125 mm 125 mm

#50 Taper #50 Taper #50 Taper7,500 max rpm 7,500 max rpm 7,500 max rpm

2-Speed 2-Speed 2-SpeedGeared Head Geared Head Geared Head

450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500610 Nm @ 500 610 Nm @ 500

Air/Oil Injection Air/Oil Injection Air/Oil InjectionLiquid Cooled Liquid Cooled Liquid Cooled

30 hp 30 hp 30 hp22.4 kW 22.4 kW 22.4 kW

(x=3,400 lb) 5,600 lb (x=3,400 lb) 5,600 lb (x=3,400 lb) 5,600 lb(15 124 N) 24 910 N (15 124 N) 24910 N (15 124 N) 24910 N

600 ipm 360 ipm 360 ipm15.2 m/min 9.1 m/min 9.1 m/min



30+1 30+1 30+1CT or BT / 50 CT or BT / 50 CT or BT / 50

4" / 10" 4" / 10" 4" / 10"102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm

30 lb 30 lb 30 lb13.6 kg 13.6 kg 13.6 kgSMTC SMTC SMTC

4.2 sec 4.2 sec 4.2 sec6.3 sec 6.3 sec 6.3 sec

±0.0003"2 ±0.0003"2 ±0.0003"2

±0.008 mm ±0.008 mm ±0.008 mm±0.0002"2 ±0.0002"2 ±0.0002"2

±0.005 mm ±0.005 mm ±0.005 mm

26,500 lb 29,500 lb 30,900 lb12 020 kg 13 381 kg 14 016 kg

4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar

200 - 250 VAC 200 - 250 VAC 200 - 250 VAC380 - 480 VAC 380 - 480 VAC 380 - 480 VAC

Flow Rate DynamicsThe chart above illustrates the relationship between flow and pressure. For both the 300 psi and 1,000 psi through-spindle coolant options, the highest pressure occurs at the lowest flow rate. The actual pressure delivered to the cutting edge depends on the size of the coolant passages in the tool. Smaller coolant passages restrict the flow, causing the pressure to increase (up to the maximum provided by the system). Conversely, larger coolant passages in the tool allow more fluid to pass through, resulting in lower pressure at the cutting edge.

50 Taper Offers More 40 Taper 50 TaperGage diameter (A) 1.750" 2.750" 44.45 mm 69.85 mmTaper length (B) 2.687" 4.000" 68.25 mm 101.60 mmTool clamp force* 1,800 lb 4,000 lb 8 007 N 17 793 NMax tool weight 12 lb 30 lb 5.4 kg 13.6 kgMax tool diameter 6" 10" 152.4 mm 254 mm

*Nominal


NOTE: FLA/kVA requirements determined by motor horsepower. Check with your Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to change without notice. Not responsible for misprints or typographical errors.

A

A

B

B

VF-9/50 VF-10/50 VF-11/50

84" 120" 120"2134 mm 3048 mm 3048 mm

40" 32" 40"1016 mm 813 mm 1016 mm

30" 30" 30"762 mm 762 mm 762 mm

5 - 35" 5 - 35" 5 - 35"127 - 889 mm 127 - 889 mm 127 - 889 mm

84" 120" 120"2134 mm 3048 mm 3048 mm

36" 28" 28"914 mm 711 mm 711 mm4,000 lb 4,000 lb 4,000 lb1814 kg 1814 kg 1814 kg

5/8" 5/8" 5/8"16 mm 16 mm 16 mm

4.92" 4.92" 4.92"125 mm 125 mm 125 mm

#50 Taper #50 Taper #50 Taper7,500 max rpm 7,500 max rpm 7,500 max rpm

2-Speed 2-Speed 2-SpeedGeared Head Geared Head Geared Head

450 ft-lb @ 500 450 ft-lb @ 500 450 ft-lb @ 500610 Nm @ 500 610 Nm @ 500 610 Nm @ 500

Air/Oil Injection Air/Oil Injection Air/Oil InjectionLiquid Cooled Liquid Cooled Liquid Cooled

30 hp 30 hp 30 hp22.4 kW 22.4 kW 22.4 kW

(x=3,400 lb) 5,600 lb (x=3,400 lb) 5,600 lb (x=3,400 lb) 5,600 lb(15124 N) 24910 N (15124 N) 24910 N (15124 N) 24910 N




30+1 30+1 30+1CT or BT / 50 CT or BT / 50 CT or BT / 50

4" / 10" 4" / 10" 4" / 10"102 mm / 254 mm 102 mm / 254 mm 102 mm / 254 mm

30 lb 30 lb 30 lb13.6 kg 13.6 kg 13.6 kgSMTC SMTC SMTC

4.2 sec 4.2 sec 4.2 sec6.3 sec 6.3 sec 6.3 sec

±0.0003"2 ±0.0003"2 ±0.0003"2±0.008 mm ±0.008 mm ±0.008 mm±0.0002"2 ±0.0002"2 ±0.0002"2

±0.005 mm ±0.005 mm ±0.005 mm26,500 lb 29,500 lb 30,900 lb12020 kg 13381 kg 14016 kg

4 scfm, 100 psi 4 scfm, 100 psi 4 scfm, 100 psi113 lpm, 6.9 bar 113 lpm, 6.9 bar 113 lpm, 6.9 bar

200 - 250 VAC 200 - 250 VAC 200 - 250 VAC380 - 480 VAC 380 - 480 VAC 380 - 480 VAC

Through-Spindle Coolant Options8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0

Vo

lum

e (

GP

M)

1,000300

1,000 psi TSC output

300 psi

TSC output

Worldwide Support

Haas Automation, Inc.2800 Sturgis Road, Oxnard, California 93030 Toll Free: 800-331-6746 Fax: 805-278-8540

www.HaasCNC.com

Haas Automation, EuropeMercuriusstraat 28, B-1930 Zaventem, Belgium • Tel: 011-32 2 522 99 05 Fax: 011-32 2 523 08 55

Haas Automation, AsiaNo. 96 Yi Wei Road, Building 67, Waigaoqiao FTZ, Shanghai 200131 P.R.C. • Tel: 011-86 21 3861 6666 Fax: 011-86 21 3861 6799

Our network of dedicated Haas Factory Outlets provides local attention to detail, fully stocked service vans, and the training and backing of an international organization. In total, more than $50,000,000 in spare parts are stocked at 160 locations worldwide. Local parts inventories are supported by overnight availability from main headquarters.

U.S. headquarters & manufacturing facility

• European headquarters & showroom withmachine inventory and spare partsdistribution center (Brussels)

• Asian headquarters & showroom withmachine inventory and spare partsdistribution center (Shanghai)

39-906035

Head Office, California, USA European Headquarters, Brussels, Belgium Asian Headquarters, Shanghai, China

More than $50,000,000 in spare parts are stocked at 160 locations worldwide.

Haas Vertik Brochure

Documents

Transcript of Haas Vertik Brochure