ENERGY INDUSTRYFOSSIL | NUCLEAR | WIND | HYDRO | OIL & GAS | ONSHORE & OFFSHORE

ENERGY INDUSTRYFOSSIL | NUCLEAR | WIND | HYDRO | OIL & GAS | ONSHORE & OFFSHORE

INNOVATIVE & CUSTOMIZED SOLUTIONS

6 HIGH PRODUCTIVITY SOLUTIONS

8 CHALLENGING OFF-SHORE PROJECT

12 AFTER SALES SERVICE – WORLDWIDE - RELY ON US!

16 A SUCCESSFUL STORY - A PIPELINE FROM ISRAEL TO BRAZIL

18 SOLUTIONS FOR OIL-PLATFORMSTRUCTURE ELEMENTS AND OFF-SHORE WIND TOWERS

ENERGY INDUSTRYFOSSIL | NUCLEAR | WIND | HYDRO | OIL & GAS | ONSHORE & OFFSHORE

22 EFFICIENT LONG SEAM WELDING

24 YOU REQUIRE HIGH PRODUCTIVITY? THEN EACH COMPONENT HAS TO MATCH PERFECTLY!

26 CUSTOMIZED PLC WELDING CONTROLLER & WELD DOCUMENTATION SYSTEM

30 TURBINE MANUFACTURING

36 GOOD ACCESS FOR THE OPERATOR – GOOD WELDING

38 WELD OVERLAY SOLUTIONS HARD-SURFACING & CRA

42 OVERLAY WELDING OF TURBINE SHAFTS

44 PIPE MILL SOLUTIONS

48 TWO-STEP PRODUCTION PROCESS: FORMING AND TACK WELDING

50 AN INTELLIGENT FLUX FEEDING AND RECOVERY SYSTEM

52 PRODUCTION LINES

56 PROCESS DEVELOPMENT

58 REFERENCE LIST

6

HIGH PRODUCTIVITY SOLUTIONS

HAANE welding systems is a company active in mechanical engineering for the welding industry with many years of experience, but nevertheless a young and very flexible team of designers, welding specialists and a professional production workforce.

Our products? Solutions! We handle different kinds of welding processes, special cutting applications and a very wide range of work piece handling systems.

We not only ensure high deposit rates, but also seek to minimize the non-arc-time which quite often accounts for more than half of the welding time.

Thanks to our own in-house facilities, 3D-designing (SolidWorks) and manufacturing, we are able to realize customized solutions very quickly.

Being future-oriented and open to new challenges, we will identify the best way how to contribute to the success of your projects.

We deliver consultant studies, equipment and turn-key units.

Our assembly, start-up and after-sales crew with a great deal of international experience operates worldwide. They do their job on land, on water and, if necessary, even in the air.

This broschure offers you a journey through the exciting industry we work in to discover our core values and our contribution to the advancement of welding technology.

8

HAANE welding systems also delivered a welding station, suitable for joining two pipes each 13,500 mm in length, welding inside and outside. The double-pipe of 27,000 mm length thus created was fed into the fire line of a pipe-laying vessel sinking off-shore subsea pipelines.

But there was one tricky point: Circular welding of 10” ID pipes was not yet state-of-the-art technology at this time. However, HAANE welding systems took this job: Finding a solution including design, manufacturing, testing, installing, start-up and production supervision within a few months. And we did it with success.

CHALLENGING OFF-SHORE PROJECT

10

Additionally, we also took care of non-arc times, because time is money, especially valid for jobs on a very expensive vessel.

Some technical features: 

• Pipe length 13,500 mm each

• Pipe diameter 10” ID

• Circumferential inside and outside welding

• Inside welding with SAW single wire technology

• Outside welding with SAW tandem technology DC/AC

• Welding head positioning speed: 40,000 mm/min

• Laser tracking system

• Equipped with Siemens PLC-System and HAANE welding controller

• Remote-Service-Facility via satellite

CHALLENGING OFF-SHORE PROJECT

12

AFTER SALES SERVICE – WORLDWIDE RELY ON US!

14

Of course, there was also a need for assembly, start-up and after sales service on the vessel. But that was no problem for the highly motivated and experienced HAANE team.

All trainings needed like the Norwegian Offshore Survival Training (OLF), Netherlands Emergency Response Training (NOGEPA), also Helicopter Underwater Escape Training (HUET) plus Emergency Breathing System were carried out in order to acquire the necessary professional off-shore licenses.

AFTER SALES SERVICE – WORLDWIDERELY ON US!

(imag

e so

urce

: Alls

eas

Engi

neer

ing

bv, N

L-D

elft

)

16

A SUCCESSFUL STORYA PIPELINE FROM ISRAEL TO BRAZIL

Certificate HMTS 2009

Certificate

Falck Nutec Rotterdam

Participant place and/or date of birth: 23.05.1968

In recognition of successful completion of the following course of instruction

Basic Offshore Safety Introduction and

Emergency Response Training (NOGEPA 0.5A),

including HUET plus Emergency Breathing

SystemApproved by NOGEPA for 48 months

______________________________Authorised Signature

3927592 ______________________________

Certificate Number

03.11.2015

______________________________Valid Until

Falck Nutec Rotterdam 02.11.2011

______________________________Course Location and Date

Vessel layers are hurrying from job to job somewhere in the world and it was our challenging task to install our complete welding equipment ready for use between two of those jobs during the crossing from Israel to Brazil – and only 4 weeks were left for this ambitious target…

Finally, everything went according to plan and the job was successfully finished in time.

Heute aktuell:

� Konferenz zur Auflö-sung der Duesberg-Haupt-schule.

� Umfrage: Was kommtunter den Weihnachts-baum?

Redaktion BorkenPeter Berger (pet) Tel. 02861/944-163Marita Rinke (mr) Tel. 02861/944-164Markus Schönherr (kus) Tel. 02861/944-168Fax 02861/944-179, borken@borkenerzeitung.de

Verlag J. Mergelsberg GmbH & Co. KGBahnhofstr. 6, 46325 BorkenTel. 02861/944-0, Fax 02861/944-109www.borkenerzeitung.de, verlag@borkenerzeitung.deLeser-Service / ZeitungszustellungTel. 02861/944-141bis 6.00 Uhr Anrufbeantworter, ab 6.00 Uhr persönlichAnzeigenPrivate Kleinanzeigen Tel. 02861/944-103Gewerbliche Anzeigen Tel. 02861/944-120Fax 02861/944-129BZ-Ticket-CenterBorken, Am Markt Tel. 02861/944-110

BorkenMELDUNGEN

Raser tappen in RadarfalleBORKEN/KREIS. 85 Kilo-meter pro Stunde bei er-laubtem Tempo 50: DerAutofahrer, der auf der Ra-esfelder Straße geblitztwurde, hatte deutlich zuviel auf dem Tacho. Für diePolizei war das eine dergravierendsten Tempo-Überschreitungen der Vor-weihnachtswoche. 12.901Fahrezuge seien an 38Messstellen im Kreis ge-prüft worden, heißt es ineiner Pressemitteilung.Mehr als sechs Prozent derFahrer seien zu schnellunterwegs gewesen. AchtMänner und Frauen über-

schritten die zulässigeHöchstgeschwindigkeitderart, dass sie mit einemFahrverbot rechnen müs-sen. 130 Bußgeldverfahrenwurden eingeleitet. In 685Fällen wurden vor Ort Ver-warnungsgelder fällig be-ziehungsweise Zahlschei-ne ausgehändigt. „Über-höhte Geschwindigkeitund Raserei zählen nachwie vor zu den Hauptun-fallursachen und führenimmer wieder – auch beiunbeteiligten Verkehrsteil-nehmern – zu schwerenUnfallfolgen“, heißt esvonseiten der Polizei.

Mit Kabarett das Jahr beginnenBORKEN. Die Kabarettis-tin Frieda Braun ist amSonntag, 8. Januar 2012,zu Gast in Borken. AufEinladung der Kolpingsfa-milie Borken wird sie ab17 Uhr im Jugendhaus ihrProgramm „Sammelfieber“präsentieren, heißt es ineiner Ankündigung. DieKabarettistin wurde für ih-re hervorragende Mimikund Sprachwitz mit dem

Dattelner Kleinkunstpreisausgezeichnet. Eintritts-karten zum Preis von 10Euro gibt es bei IngridKuth unter der Telefon-nummer 02861/61687 undbei Monika Ebbing unterder Telefonnummer02861/1037. An derAbendkasse kosten siezwölf Euro.

| www.kolping-borken.de

Einbrecher ohne BeuteBORKEN. Ohne Beutesind Einbrecher geblieben,die am Donnerstag in einHaus an der KönigsbergerStraße eingedrungen sind.Wie die Polizei mitteilt,hebelten die bislang unbe-kanten Täter eine Balkon-tür auf, um in das Haus zu

gelangen. Als die Hausbe-wohnerin gegen 17.45 Uhrnach Hause kam, flüchte-ten die Einbrecher durchden Garten. Gestohlenwurde nichts. Hinweisenimmt die Polizei unterder Telefonnummer02861/9000 entgegen.

Samstag, 24. Dezember 2011Borkener Zeitung / Nr. 299 1. Lokalseite BORKEN

5. Lokalseite

BORKENKonferenz zurSchulschließung.

8. Lokalseite

HEIDENMargret Schweppe-Ebber über dasDiplomatenleben in Rom.

12. Lokalseite

SPORTDrei Schwesternsorgen für Schwung.

Anzeige

Weihnacht bei Wind undWellenVon Markus Schönherr

WESEKE. Während es sichdie Verwandten in der Hei-mat heute vor dem Weih-nachtsbaum gemütlich ma-chen, passieren 15 Männeraus dem Raum Borken dieMeerenge von Gibraltar. Aufder einen Seite Europa, aufder anderen Afrika. Der 300Meter lange Ozeanriese Soli-taire ist bis Ende Januar ihrZuhause.„Eine Weihnachtsfeier ha-

ben wir nicht vorbereitet“,sagt Ulrich Kleine-Boesdurch ein knisterndes Sateli-tentelefon. „Aber es gibt ei-nen kleinen Weihnachts-baum.“ Kleine-Boes ist Kon-struktionsleiter der FirmaHaane Welding Systems. DasWeseker Unternehmen ent-wickelt und fertigt Schweiß-automaten. Und genau die-ses Know-how ist jetzt aufder Solitaire gefragt. Die420-köpfige Stamm-Besat-zung verlegt Tiefsee-Pipeli-nes. Die Männer des Wese-ker Unternehmens und ihresZulieferers Lanfer Automati-on sorgen mit ihrerSchweißtechnik für mehr Ef-fizienz.Dass Weihnachten auf

Fachleute aus Borken und Umgebung installieren Schweiß-Technik auf 300Meter langem Schiff

dem Schiff eine eher unter-geordnete Rolle spielt, liegtauch an dem engen Schicht-plan: Zwölf Stunden wirdimmer am Stück gearbeitet.„Wir installieren neue

Schweißköpfe“, erklärt Klei-ne-Boes den Job der Seeleu-te auf Zeit. Damit sollen diezwölf Meter langen Einzel-teile des Endlosrohres zu-sammengefügt werden, das

die Solitaire beim nächstenAuftrag hinter sich herzie-hen wird. Das wird in brasi-lianischen Gewässern derFall sein. Im Moment befin-det sich die Solitaire auf derÜberfahrt. Die Tage auf demAtlantik werden genutzt, umdas Schiff mit der neuerTechnik aus Weseke auszu-statten.Die wenige Freizeit, die

den Männern an Bord bleibt,wird hauptsächlich zur Ent-spannung genutzt. „Es gibteine Sauna, einen Fitness-raum und Fernseher“, sagtKleine-Boes. Nachdem dasSchiff Anfang der Woche aufZypern ausgelaufen war,hatten die waschechtenLandratten noch mit der Ge-wöhnung an das Schiffsle-ben und mit der Zeitumstel-lung zu tun. „Da haben wirin der Freizeit viel geschla-fen“, berichtet Kleine Boes.Anspruchsvoll ist nicht

nur die Arbeit an Bord.

Schon im Vorfeld wurde denSchweiß-Experten einigesabverlangt. Nachdem dieWeseker Firma den Zuschlagfür den Vier-Millionen-Eu-ro-Auftrag bekam, musstendie Teilnehmer erst mal einSicherheitstraining absolvie-ren – inklusive eines simu-lierten Hubschrauber-Ab-sturzes in einem Wasserbe-cken.In punkto Sicherheit sind

die Männer also bestens vor-bereitet. Jetzt kann ihnen ei-gentlich nur noch eins dasLeben schwer machen: derTrennungsschmerz, speziellan den Weihnachtstagen.„Ich arbeite ja viel, da werdeich kaum Zeit für Heimwehhaben“, sagt Crew-MitgliedMarc Stemmermann. Undwenn die Sehnsucht dochmal zu groß wird, muss daseigens für diesen Zweck an-geschaffte Satellitentelefonher. Auch, wenn es knistertin der Leitung.

15 Seeleute auf Zeit: Bis Ende Januar sind die Experten in Sachen Schweißtechnik anBord der Solitaire.

Die Solitaire in Aktion. Mit Schweißtechnik aus Weseke verlegt die Besatzung Tiefsee-Pipelines. Fotos: pd

Auf demWunschzettel: BürgerfreundlichkeitWeihnachtliche Gedanken zum gelben Sack

uch das gehört zuWeihnachten: der Gang

hinters Haus, in die Garage,zum Carport oder wo sonstdie Abfalltonnen stehen mö-gen, um sich der Geschenk-verpackungen zu entledigen.Dann wird man sich viel-leicht der Aufregung der ver-gangenen Tage über diekünftige Versorgung mit gel-ben Säcken in Borken ent-sinnen.Im kommenden Jahr hält

A die Planwirtschaft Einzug inBorken. Drei Rollen für je-den Haushalt – das gibt dasEntsorgungsunternehmenBorchers vor. Sind die dreiRollen alle (was umsoschneller geschieht, je mehrKöpfe sprich Abfallprodu-zenten der Haushalt hat),gibt’s Nachschub per Anfor-derungskarte oder direkt beiBorchers.Es ist ja o.k., die in Borkenoffenbar grassierende

Zweckentfremdung der gel-ben Säcke mit erzieheri-schen Mitteln einzudäm-men. Die Nachteile liegenaber auf der Hand. Wenn ge-rade kein gelber Sack zurHand ist, wird der Müll ebennicht mehr „sortenrein“ ge-trennt, sondern wandertumso schneller in die graueTonne. Und, Stichwort Öko-Bilanz: Was ist eigentlich fürdie Umwelt gewonnen,wenn man motorisiert an

den Stadtrand dackeln muss,um sich seine Sackration ab-zuholen?Es ist völlig unverständlich,warum zur Kostenminimie-rung alle Borkener Privat-haushalte in Sippenhaft ge-nommen werden sollen. AufdemWunschzettel steht da-her auch: mehr Bürger-freundlichkeit.In diesem Sinne: Frohe undabfallvermeidende Weih-nachten! Peter Berger

Thema der Woche

GEMEN/KREIS. Der Natur-und Vogelschutzverein KreisBorken lädt zur Mitglieder-versammlung ein. Beginnam Freitag, 6. Januar, ist um18 Uhr im Hotel Demming.Ab 19.30 Uhr sind alle Inte-ressierten zu einem Vortragvon Professor Dr. WilfriedStichmann eingeladen. DasThema: Artenschutz am Bei-spiel des Graureihers.

Versammlung derVogelschützer

SOLUTIONS FOR OIL-PLATFORMSTRUCTURE ELEMENTS AND OFF-SHORE WIND TOWERS

18

20

Off-Shore structure elements like monopoles or chords and braces for tri- or quattro-pods, as well as off-shore wind towers possess mostly large diameters and/ or high wall thickness solutions having many meters of weld joint length.

Anyhow, HAANE welding systems is able to supply solutions for all this kind of applications.Huge welding platforms equipped with 2, 3 or 4 welding heads, even multi-wire, operating at the same time, also tandem-twin solutions, that’s our business.

A high degree of automation, narrow gap solutions, multi-wire applications - that’s what we handle.

SOLUTIONS FOR OIL-PLATFORMSTRUCTURE ELEMENTS AND OFF-SHORE WIND TOWERS

22

Those of you who have ever assessed the arc-time, the main time of production if it comes to welding, might have been disappointed recognizing the low duty cycle percentage whilst long seam production.

The non-arc-time is one of the essential figures in this game.

Many efforts are made to increase the deposit rate, but this means only trying to be more efficient during the 25 % of arc time.

But the non-arc-time is killing your profit, accounting for about 75 %.

In this context, it is difficult to understand why the non-arc-time is usually not in the focus of the welding equipment suppliers.

HAANE welding equipment takes care of this, e.g. by installing automatic wire cutters.

We kill your non-profit non-arc-time, whenever possible.

EFFICIENT LONG SEAM WELDING

24

In order to achieve the highest possible increase in efficiency and productivity, a perfect combination of all components is a must in the manufacturing system:

• High deposit welding process

• Low joint volume concept

• Disturbance-free wire feeding system and bulk wire spools

• Never ending flux supply system, also able to provide pre-heated flux at the welding torch

• A flexible workpiece positioning unit

• A quick and rigid weld head positioning unit incl. tracking system

YOU REQUIRE HIGH PRODUCTIVITY? THEN EACH COMPONENT HAS TO MATCH PERFECTLY!

26

Having an excellent MMI (Man Mashine Interface) is one of the challenges of today. Being informed about the actual status of all welding system components involved, ensures you to recognize upcoming problems at a very early stage.

Thus you will be able to react in time and to avoid possible damages to your workpiece and/or to your machine.

Therefore, Haane welding systems provides solutions based on Siemens S7 technology.

CUSTOMIZED PLC WELDING CONTROLLER & WELD DOCUMENTATION SYSTEM

28

Product quality, product safety and product liability are good arguments for installing a weld data documentation system. It is possible to get a separate documentation sheet for each workpiece which makes this system an important part of a higher-level quality management system.

CUSTOMIZED PLC WELDING CONTROLLER & WELD DOCUMENTATION SYSTEM

30

TURBINE MANUFACTURING

32

Manufacturing gas or steam turbines requires a high level of interdisciplinary know-how.

To save valuable resources and lower the CO2 emission any increase of turbine efficiency is of great importance. That’s why new steel alloys for the forged rotor and the casted housing are developed in order to achieve process temperatures of up to 600° C providing a higher efficiency. Welding this kind of heat and creep resistance steels is a very huge challenge.

TURBINE MANUFACTURING

(imag

e so

urce

: Sie

men

s AG

, Ber

lin)

34

For welding and handling such heavy workpieces HAANE welding systems delivers equipment at top quality level, e.g. a turn- and tilting positioner cradle type for workpieces with a weight of up to 200t securing highest accuracy and minimized distortion, or SAW tandem twin technology.

TURBINE MANUFACTURING

(imag

e so

urce

: Sie

men

s AG

, Ber

lin)

(imag

e so

urce

: Sie

men

s AG

, Ber

lin)

36

Usually, the welding head is mounted on the same boom as the operator seat. But then operator’s access to the weld is quite poor, because the welding happens under his feet.

Good access to the weld means a good control of the weld and this means good chances for a good weld result. HAANE welding systems offers operator seats mounted on a second, independent and separately adjustable boom. Thus the operator is able to define his best possible access to the weld without influencing the weld head position.

The result: Excellent quality.

HAANE welding systems also integrates workpiece heating facilities, e.g. gas heaters, inductive or resistance heaters.

GOOD ACCESS FOR THE OPERATOR – GOOD WELDING

38

WELD OVERLAY SOLUTIONS/HARD-SURFACING & CRA

40

There are many reasons for doing a weld overlay on work pieces.

It can be hard-surfacing against abrasion or cavitation performed by using wear-resistant manganese steel or cobalt –based consumables (e.g. stellite); it can also be CRA (corrosion resistant alloys) in order to protect your construction against chemical attack eg. by CrNi (stainless steel) – or Ni-alloyed overlays (e.g. Inconel).

HAANE welding system delivers welding and handling equipment for almost all of these applications.

Welding procedures supplied by us: SAW, TIG (GTAW) hot wire cladding, MIG/MAG (GMAW), Open Arc welding, SAW cladding, ES-Cladding (strip cladding), PTA (Plasma Transferred Arc) thermat spray cladding.

And of course we are always open for implementing new procedures!

WELD OVERLAY SOLUTIONS/HARD-SURFACING & CRA

42

One special application is the weld overlaying of turbine shafts for gas and steam turbines.

On the one hand the rotor itself needs the best possible heat-resistant steel grade and, on the other hand, the bearing areas need a different chemical composition.

A weld overlay in the bearing area is therefore the best solution to meet both requirements.

HAANE welding systems has developed a weld overlay system setting the welding torch to the right position fully automatically during the welding process. The current weld height and temperature are controlled by the PLC welding controller, and also the preheating unit and the PWHT system are integrated here.

OVERLAY WELDING OF TURBINE SHAFTS

44

“We don’t do things by halves“ – Which means we provide turnkey solutions for helical on-/ offline pipe mills and for longitudinal pipe mills.

This includes:

• Pipe forming, preparation and welding

• Pipe handling

• Pipe testing

Our customers produce pipes in conformity with the API (American Petroleum Industry) standards for oil, gas and water transmission for the on-shore and off-shore sector. Many innovations for the welding technology bear our signature, e.g. an adjustable flux temperature, an optimal wire transport and wire straightening. All these special applications reflect our high production quality and stability.

Whether you wish to build a new pipe mill or modernize an existing one, we are the dependable partner for you.

PIPE MILL SOLUTIONS

46

For SAW multi-wire welding with inside and outside welding heads detailed solutions are available which allow high deposition rates.

Also for small pipe diameters there exists a 14” solution with a 90° straightener and contact jaws having a lifetime of up to one week in a 3-shift operation, successfully implemented by the engineering experience in this field.

As so often, it is the small details which are the key to success.

Therefore, together with our customers, we have developed solutions round the handling of the welding head approved for applications under great operation stress.

Optionally using an intelligent cassette system, any adjustment of the torches is coupled with a safe flux provision of flux to every wire.

Furthermore, the user-friendly equipment greatly reduces maintenance time.

PIPE MILL - DETAILS

48

The tack welding head is a success story:

• Welding speed in ongoing operations of 10m/min up to 15 m/min

• Minimum pipe diameter › 14”

Due to a specially designed wire-feed system in combination with a „proven-in-use” gas protection the weld spatters are considerably reduced and less stops will be necessary for cleaning during operation especially in a flying cross joint machine.

Besides, all these systems are completed by a laser tracking system inside or outside for an automatic welding head guidance.

TWO-STEP PRODUCTION PROCESS:FORMING AND TACK WELDING

50

The flux recycling admixing rate has to be controlled and complied with the requirements of the API and oil company regulations.

For this purpose, HAANE welding systems has developed a flux recovery system which fulfills these requirements. Some of the special features are:

• Due to a controlled temperature level of › 100 °C the flux is safe during operation

• Providing pre-heated and insulated tanks

• Including heated flux funnels

The systems are typically equipped with magnet separators. The design follows a soft and smooth flux transport which reduces the stress for the components and also for the flux itself.

We only use first class components for the operation stations from carefully selected and well-known suppliers, e.g. FESTO, SIEMENS, who ensure fast and future availability by high value stability.

AN INTELLIGENT FLUX FEEDING AND RECOVERY SYSTEM

52

PRODUCTION LINES

54

HAANE welding systems is able to supply design studies for nearly planned or reorganized production lines and factory layouts.

Therefore, it will always be an advantage to take a look beyond the basics of existing stand-alone solutions, even and especially if they have existed for a long time.

Many argue - „Never change a running system“.

But fact is that productivity is the fuel of our technical progress.

So don‘t be too late!

PRODUCTION LINES

56

If you want to optimize a process of your production apart from the mainstream, but in any event you want to keep it confidential: Please contact us.

We are the right partner to help you face your individual challenges.

We are competent and discreet, and we know how to handle a confidentiality agreement.

We can help you to optimize everything around your production process.

If you need a specific solution, let us know – our experts will find it!

PROCESS DEVELOPMENT

58

We proudly present some of our renowned customers:

• Aker Solutions AS, Norway

• Allseas Engineering bv, The Netherlands

• Arcelor Projects Spiral Mill Bv, The Netherlands

• Berg Steel Pipe Corporation, USA

• Bharat Heavy Electricals Ltd., India

• Böhler Schweißtechnik Deutschland GmbH, Germany

• Caterpillar Global Mining HMS GmbH, Germany

• Corinth Pipeworks s.A., Greece

• Essar - Hazira Pipe Mill Limited, India

• Europipe GmbH, Germany

• Federal Institute for Materials Research and Testing, Germany

• FST Industrie GmbH, Germany

• Jindal SAW Ltd., India

• OSX Construção Naval S.A., Brazil

• PSL Ltd., India

• PSL North America, USA

• Salzgitter Mannesmann Großrohr GmbH, Germany

• Maschinenbau Scholz GmbH & Co. KG, Germany

• Siemens AG, Germany

• Sempell AG, Germany

• SIF Group b.v., The Netherlands

• Sulzer Metco AG, Switzerland

• Ümran, Turkey

• VandeGrijp Bv, The Netherlands

• Welspun Gujarat Steel Pipe Ltd., India

REFERENCE LIST

INNOVATIVE & CUSTOMIZED SOLUTIONS

IMPRINT

ENERGY INDUSTRYprinted 2013 in Germany

information booklet | english edition

All trademarks and registered trademarks belong to their respective owners. Reproduction only

with explicit permission.

HAANE welding systems GmbH & Co. KG Subject to technical modifications and other changes.

HAANE welding systems GmbH & Co. KG

Kotten Büsken 37D-46325 Borken-WesekeGermany

[P] +49 (0) 28 62 / 58 98-0[F] +49 (0) 28 62 / 58 98-164

[E] info@haane.de[I] www.haane.de