HA-Series - Hudson Cutting Solutions · HA-SERIES Applications: Suitable for use with an extensive...
2
HA-SERIES Swing Beam Cuing Presses RELIABLE, SAFE, & EFFICIENT
Transcript of HA-Series - Hudson Cutting Solutions · HA-SERIES Applications: Suitable for use with an extensive...
HA-SERIESSwing Beam Cutting Presses
RELIABLE, SAFE, & EFFICIENT
This company reserves the right to supply products that may differ slightly from those described in this publication.
Hudson Cutting Solutions8810 Place Ray-Lawson
Anjou (Quebec),
Canada H1J 1Z2
T: +1 (888) 210-1655
F: +1 (514) 355-5953
www.hudsoncutting.com
HA-SERIESApplications:Suitable for use with an extensive range of narrow to medium width sheets or roll goods materials, such as textiles, plastics, rubber, foam, composites, paper and paperboard, wood, leather, cork, and felt.
Features & Benefits: ⊲ Rugged cast iron frame
⊲ Two cutting bed sizes
⊲ Three steel fabricated swinging beam widths
⊲ Automatics depth of cut setting with fine tuning potentiometer
⊲ Special selectable setting for use with small area dies, prevents over penetration into the cutting pad
⊲ Precise cutting results ensuring reduced wear of cutting pads & dies
⊲ Excellent operator visiblity
⊲ Complies with OSHA regulations
⊲ Fitted exclusively for two hand trip operation
⊲ Low maintenance
⊲ Low static and dynamic floor load
⊲ Low noise level
Model HA 22-14 HA 27-20 HA 27-24
Cutting Force 22 US Tons 27 US Tons
Cutting Bed Size 16.9” x 35.4” 19.7” x 39.4”
Beam Width 14.5” 19.7” 24”
Maximum Open Daylight* 4.9” 4.9”
Minimum Open Daylight* 1.4” 1.4”
Pump Motor 1.5 HP 2.0 HP
Net weight 1,635 lbs 2,500 lbs
Dimensions (w, d, h) 36”x33”x55” 40” x 41” x 56”
*Measured from underside of striking face to bed
