H549 Windfall Stand for iPad Pro 12.9 IG - Heckler · Secure Stand for iPad Pro 12.9-inch (3rd Gen)...
Transcript of H549 Windfall Stand for iPad Pro 12.9 IG - Heckler · Secure Stand for iPad Pro 12.9-inch (3rd Gen)...
Assembly & Installation
H549
WindFall®
STANDSecure Stand for iPad Pro 12.9-inch (3rd Gen)
Limited WarrantyHeckler Design warrants your product to be free from defect in material and workmanship for a period of two years from the original date of purchase. Electronic components are warranted to be free from defect for a period of one year from the original date of purchase. If you discover a defect, please contact [email protected]. Heckler Design will repair, at our discretion, using new or refurbished components. If repair is not possible, Heckler Design will replace the item.
Compatible with:
iPad 12.9-inch (3rd Gen)
F581
S130
4x
4x
4x
1x
Felt Feet
Friction Feet
F645
F646
Security Screws
Security Assembly Tool
1x
Assembly ToolF529
1:1
1:1
Keep your special assembly tool in a safe place. To purchase a replacement, please contact [email protected].
Optional: Kensington ClickSafe Cable Lock(sold seperately)
Optional: PivotTable (sold seperately)
Optional: Kensington NanoSaver Keyed Laptop Lock(sold seperately)
Optional: PivotTack (sold seperately)
1 Select then install feet
3
F581
4x
Friction feet
4x
S130Felt feet
Option: Remove original screws
Install security screws
4
F529
F646
F645
F529
2 Loosen and remove screws
3 Remove right-hand tablet bracket
5
Loosen, but do not remove.
and cord securer
6
4 Install the iPad Pro
5 Route your USB-C cable and reinstall right-hand tablet bracket
F529
7
5 Fasten cord securer
6 Tighten all screws
Adjust cord securer snug to your cable
F529
F529
7 Done
8
9
Counter Mounting
2x
(Sold Seperately)
PivotTack
(Sold Seperately)
10
(Sold Seperately)
Kensington Nano ClickSafe Cable Lock
PivotTable
(Sold Seperately)
11
(Sold Seperately)
Kensington ClickSafe Cable Lock