VARIODECK Steel Waler Slab Tables - PERI Ltd. UK, Formwork ...
H20 Slab Table Formwork System - Baili€¦ · H20 Slab Table Formwork System consists of H20...
Transcript of H20 Slab Table Formwork System - Baili€¦ · H20 Slab Table Formwork System consists of H20...
H20 Slab Table Formwork System
79
H20 Slab Table Formwork System consists of H20 Timber Beams. Steel Props, Table Head and Steel plate together with the 18mm thick plywood sheets.
H20 Slab Table Formwork are designed according to the structure of the building and mainly used for high-rise building, podiums, parking and large slab areas.
For unusual geometrical structure, a customized table is the right choice. The special tables are combined with modular tables for the construction of unusual structure.
H20 Slab Table Formwork System
Introduction
SLAB FORMWORK SYSTEM
80
H20 Slab Table Formwork System consists of H20 Timber Beams, Steel Props, Table Head and Steel plate together with the 18mm thick plywood sheets.
H20 Slab Table Formwork is designed for concrete slabs up to 45cm thick.
H20 Slab Table Formwork is designed according to the structural geometry of the building and mainly used for high-rise buildings, podiums, parking and large slab areas.
Horizontal movement of the tables is made manually by trolley while vertical movement is done by crane.
Fixing the Table Head to the H20 Slab Table is quite simple. It is fastened to the double primary beams by means of the steel plate which is a short piece of Tie Rod. No drilling, no screwing and no special tools are needed.
All information provided about maximum loads are only valid for horizontal braced slab table arrangements which are secured against existing structural building parts such as columns, shear and core walls.
The system does not allow transfer of any horizontal loads thru the Steel Props of the Table System to the ground of floor slab. The top structure of the slab table has to be braced and secured horizontally by adequate measures against existing structural concrete parts by means of wedging or any kind of bracing to walls or columns.
Characteristics
Important Information before Using the H20 Slab Table Formwork System◇
◇
◇
◇
After positioning and securing the H20 Slab Table, the Steel Props have to be aligned vertically in order to avoid any moment coming into the steel prop.
Eccentric as well as big loads have to be avoided because the steel props are designed to take centric and/or symmetrical loads only.
H20 Slab Table Formwork System
81
Accessories
11.513.9817.7914.6416.5319.9025.3231.65
15.21
16.42
0.09
0716010107160102071601030716010407160105071601060716010707160108
07160200
07160300 Table Head is directly fastened to the base or head plate of the steel prop.
07160400
Steel Prop
Table Head (for single main beam)
Table Head (for double main beam)
Join Card
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Ф60/Ф48 1400-2500 1650-3000 1900-3500Ф75/Ф60 1400-2500 1650-3000 1900-3500 2150-4000Ф88/Ф77.5 2900-5500
SLAB FORMWORK SYSTEM
82
1153.91027.41
635.63707.80
3.53
14.53
5.53
0716110107161102
0716120107161202
07160700
07160900 To be attached to the H20 Slab table on the edge of the table.
Four lifting hook must be always fixed to the primary beam ends for liffting table.
Used for carrying and moving H20 Slab tables on the constrcution site by crane.
The H20 slab table can be moved horizotally using theb Table Shifting Trolley.
Four way Head to keep the primary beam in position and protect the H20 Timber Beam from falling down.
07161000
H=7500H=5500
H=3250H=3950
Tableform Bracket
Shifting Trolley
Four -way Head
Safety Handrail
Lifting Hook
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
Remarks Weight(Kg) Item No. Spec. & tech. parameter
H20 Slab Table Formwork System
8383
Assemble Process
1.Arrange the table heads as designed. 2.Fix the main beams.
3.Fix the secondary beams with main beam by Join card. 4.Fix the plywood by tapping screws.
SLAB FORMWORK SYSTEM
8484
Join card in useTable head in use
5.Set the steel prop.
H20 Slab Table Formwork System
85
Application
SLAB FORMWORK SYSTEM
86