H-ike · Herrmans’ innovative LED Battery front light – H-IKE – especially developed for the...
1
H-ike 1. Fork bracket (version may vary) 2. Screw for 4mm Allen key 3. Nut for 8mm wrench 4. E I A, K front reflector works as ON/OFF switch 5. Flap 6. Removable protective cover 7. Transport info tape General information on H-IKE Congratulations! You are a member of the selected group of individuals biking with Herrmans’ innovative LED Battery front light – H-IKE – especially developed for the demanding climate in northern Europe. The lamp has an optimized light pattern for the rider. The lamp produces a very homogenous beam of up to 15 LUX at 10 meters’ distance. H-IKE has excellent side visibility and the visor prevents disturbing light in the riders eyes. The integrated E I A, K approved reflector works as ON/OFF switch. There are several different bracket alternatives. The H-IKE is also theft preventing since you need tools to remove the light from the bicycle. The robust and impact resistant construction ensures that the lamp will not break into pieces if the bike falls. The “Made in Finland” label is a guarantee of quality. The H-IKE complies with the lamp traffic regulations in Denmark, Norway, Sweden, Finland, Belgium, Holland, Austria and Switzerland. We wish You good visibility on your bike rides! Mounting instructions Fasten bracket (1) to the front fork of the bicycle. If your bicycle has a lamp bracket on the side of the front fork, the lamp can be mounted there without using the supplied bracket. Angle the lamp according to the area you want lit up, but do not aim it so high as to dazzle on-coming traffic. We recommend that you align the beam on the road until a distance of approximately 10m. Tighten the screw (2) and the nut (3) sufficiently to prevent the lamp from moving on its own and to avoid any unintended misalignment of the head lamp. Replacing batteries Untighten the screw (2) from the nut (3) and bracket (1). Place one finger on the flap (5) and carefully slide open the protective cover (6). Replace all three AAA batteries. Assemble in reverse order. Function Remove the transport tape (7) to connect the batteries. Move the front reflector (4) down to place the light in ON mode. Move the front reflector back up to place it in OFF mode. Features Light Patterns 1 3 7 6 4 5 2 OFF AAA BATTERY INCLUDED 20 H TIME POWER LAST STEADY 100g LIGHT OUTPUT LUX CITY TREKKING OPTIMIZED LIGHT PATTERN MODERN LOOK NON-DAZZLING SALT SPRAY TESTED APPROVALS NLD, BEL, AUT SWE, DNK, CHE FIN, NOR HERRMANS OY AB P.O. Box 36 FI-68601 Jakobstad Finland Tel. +358 20 134 5100 [email protected] www.herrmans.eu Light spread when H-ike is mounted on top of the front fork of a standard bicycle. ON REFLECTOR APPROVALS
Transcript of H-ike · Herrmans’ innovative LED Battery front light – H-IKE – especially developed for the...
H-ike
1. Fork bracket (version may vary)2. Screw for 4mm Allen key3. Nut for 8mm wrench4. E I A, K front reflector works as ON/OFF switch5. Flap6. Removable protective cover7. Transport info tape
General information on H-IKECongratulations! You are a member of the selected group of individuals biking with Herrmans’ innovative LED Battery front light – H-IKE – especially developed for the demanding climate in northern Europe. The lamp has an optimized light pattern for the rider. The lamp produces a very homogenous beam of up to 15 LUX at 10 meters’ distance. H-IKE has excellent side visibility and the visor prevents disturbing light in the riders eyes. The integrated E I A, K approved reflector works as ON/OFF switch.
There are several different bracket alternatives. The H-IKE is also theft preventing since you need tools to remove the light from the bicycle. The robust and impact resistant construction ensures that the lamp will not break into pieces if the bike falls.The “Made in Finland” label is a guarantee of quality. The H-IKE complies with the lamp traffic regulations in Denmark, Norway, Sweden, Finland, Belgium, Holland, Austria and Switzerland. We wish You good visibility on your bike rides!
Mounting instructionsFasten bracket (1) to the front fork of the bicycle. If your bicycle has a lamp bracket on the side of the front fork, the lamp can be mounted there without using the supplied bracket. Angle the lamp according to the area you want lit up, but do not aim it so high as to dazzle on-coming traffic. We recommend that you align the beam on the road until a distance of approximately 10m. Tighten the screw (2) and the nut (3) sufficiently to prevent the lamp from moving on its own and to avoid any unintended misalignment of the head lamp.
Replacing batteriesUntighten the screw (2) from the nut (3) and bracket (1). Place one finger on the flap (5) and carefully slide open the protective cover (6). Replace all three AAA batteries. Assemble in reverse order.
Function
Remove the transport tape (7) to connect the batteries. Move the front reflector (4) down to place the light in ON mode. Move the front reflector back up to place it in OFF mode.
Features Light Patterns
1
3
7
6
4
5
2
OFF
AAA BATTERYINCLUDED
20H
TIME POWERLAST STEADY
100g
LIGHT OUTPUT LUX
CITY TREKKING OPTIMIZEDLIGHT PATTERN
MODERN LOOK
NON-DAZZLING SALT SPRAYTESTED
APPROVALSNLD, BEL, AUTSWE, DNK, CHE
FIN, NOR
HERRMANS OY ABP.O. Box 36FI-68601 JakobstadFinland
Tel. +358 20 134 5100
Light spread when H-ike is mounted on top of the front fork of a standard bicycle.
ON
REFLECTORAPPROVALS
